MICROCIRCUIT, DIGITA

The contract is for a digital microcircuit, identified by NSN 5962013644535 and part number 333532-000, with a quantity of 10 units to be delivered within 250 days FOB origin. The item falls under Federal Supply Class 5962 for electronic microcircuits and is subject to strict qualification requirements, including mandatory inclusion on the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List. The supplier must comply with comprehensive technical and quality standards referenced from the DLA Master List, with traceability, testing, and documentation requirements governed by DLA Procurement Note C03 and the DLA Land and Maritime Form 918. Traceability and test reports must be submitted electronically no later than 15 days before delivery, approved in writing by the contract administrator prior to shipment, and physically included with each lot. Email submissions are capped at 15 MB and must follow a strict naming convention. The product must meet IPC/JEDEC J-STD-609 labeling standards for lead finish and be marked in full compliance with MIL-STD-129, including the special marking code 39 for ESD sensitivity. The microcircuit is classified as electrostatic discharge (ESD) sensitive and requires adherence to MIL-PRF-81705 packaging standards, specifically Type I and Type III barrier materials from qualified manufacturers on QPL-81705. The supplier must operate a certified ESD control program per MIL-HDBK-263, utilize approved ESD workstations per MIL-HDBK-773, ensure all personnel are trained in ESD handling procedures, and employ preservation methods meeting GX code requirements. Cushioning must comply with A-A-59136 Class 1 Grade B specifications, with thickness exceeding component lead length by at least 1/8 inch unless using form-fitting ESD protective containers. All packaging materials must be free of mercury or mercury compounds, and the entire supply chain must maintain traceability documentation as mandated. The contract prohibits any deviations from these technical requirements, and failure to comply with shipment authorization, documentation accuracy, or ESD protections will result in rejection and non-final payment. The designated delivery point is the DLA Distribution DDWO facility in Columbus, Ohio, with all transportation governed by DLA Procurement Notes C19 and C20.