Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

MIL-STD-129 Marking and Barcoding

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict adherence to MIL-STD-129 standards for the application of item and shipment markings using Data Matrix or linear barcodes to ensure accurate identification and tracking throughout the supply chain. All labeling must also comply with GHS guidelines under 29 CFR 1910.1200 for hazardous materials, ensuring proper hazard communication through standardized pictograms, signal words, and precautionary statements. This subcontract, issued by the Department of Defense’s Fluid Handling Division, is categorized under NAICS code 339930 and is targeted for performance at an FPO address with a ZIP code of 34091. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, indicating a compressed timeframe for submission and compliance preparation. Failure to meet these precise labeling and marking requirements could result in rejection of deliverables and potential contract noncompliance.

General Info

Must comply with MIL-STD-129 and GHS labeling for DoD shipment to FPO 34091 by August 10, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

339930 - Doll, Toy, and Game ManufacturingView NAICS

Place of Performance

FPO, AA, 34091, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply MIL-STD-129 compliant markings with Data Matrix or linear barcodes for item and shipment identification, including GHS-compliant hazardous material labeling per 29 CFR 1910.1200.

Similar Contracts

Same NAICS industry code

Playground Equipment SupplyHillsborough County is soliciting bids for the supply of certified commercial playground structures that comply with ASTM, CPSC, and ADA safety and accessibility standards. The contract is structured as a subcontract under NAICS code 339930, and all submitted equipment must meet rigorous industry benchmarks to ensure the safety and inclusivity of public play areas. Bidders are required to provide comprehensive warranty documentation and tracking records to support long-term maintenance, compliance verification, and accountability. The opportunity was posted on July 30, 2026, with responses due by August 28, 2026, at 6:00 PM Eastern Time. The place of performance and exact delivery location are not specified in the provided data, but the equipment will be deployed within Hillsborough County, Florida, with full adherence to federal and state regulatory requirements.

Hillsborough County

POSTED

DEADLINE

Marking and Labeling ServicesThe contract entails permanent marking of tools through stamping or etching to clearly identify manufacturer details, part numbers, and specifications, alongside the application of container labels and packing slips that reflect all required contract data. This work must be executed with precision to ensure traceability and compliance throughout the supply chain, with all markings meeting strict durability and legibility standards. The services are expected to be performed in Edmonton and Montréal, with no specific office address provided, and are aligned with NAICS code 339930, indicating industrial machinery and equipment manufacturing support activities. The contract is structured as a subcontract under the Government of Canada's Department of National Defence, with a response deadline of August 14, 2026, and was posted on July 24, 2026, indicating a multi-month procurement window to allow for thorough vendor evaluation and preparation.

Department of National Defence

POSTED

DEADLINE

TEEX Master Order for Student Bunker Gear

Solicitation # TEEX-ITB-26-083

Texas A&M University and the Texas A&M Engineering Extension Service, collectively referred to as Texas A&M, are soliciting bids to establish Master Orders with qualified vendors to supply student bunker gear for delivery to the TEEX campus in College Station, Texas. The solicitation, identified as TEEX-ITB-26-083, was posted on July 23, 2026, with responses due by August 6, 2026, at 11:00 PM Central Time. Vendors must meet all technical, safety, and delivery requirements specified in the invitation to ensure compliance with the needs of student training programs. The gear will be used exclusively for educational and operational training purposes at the TEEX facility, and all deliveries must be directed to the designated Texas location without exception. The purchasing entity is the Texas A&M Engineering Extension Service, operating under the State of Texas, and the point of contact for inquiries is Arturo Uresti, reachable via phone at 979-845-1042 or email at uresti@tamu.edu. The contract is not subject to any specific set-aside classifications and is open to all eligible vendors who can demonstrate the ability to meet performance standards and timelines. Bids must be submitted through the designated Texas SmartBuy portal, and vendors are expected to provide complete documentation including product specifications, compliance certifications, pricing, and delivery schedules. Failure to meet all requirements outlined in the solicitation may result in disqualification.

Texas A&M Engineering Extension Service

POSTED

DEADLINE

Custom Branded Promotional Items SupplyThe contract is for the supply of custom-branded promotional items including pens, T-shirts, bags, banners, and signage that must adhere strictly to AFROTC branding standards. All items are required to be produced and delivered in compliance with the specified design and quality requirements to ensure uniformity and official representation. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated under NAICS code 339930, meaning only small business concerns are eligible to bid. The opportunity was posted on July 23, 2026, with a response deadline of August 5, 2026, at 6:00 a.m. Pacific Time, and performance is to be carried out at a location in Montgomery with a zip code of 36112. The contracting office falls under the Department of Defense, specifically identified as FA3300 42 Cons Cc, and the contract is accessible via the SAM.gov platform for eligible vendors to review and submit proposals.

FA3300 42 Cons Cc

POSTED

DEADLINE

in about 24 hours

Art & Crafts Materials SupplyThe contract entails the supply of non-toxic, child-safe art materials specifically designed for use in K–12 educational settings, encompassing artist brushes, paints, and glue sticks that meet stringent safety standards for young learners. All products must comply with regulations ensuring they are free from harmful substances and appropriate for classroom environments where children of all ages will handle them. The solicitation is issued as a subcontract under the NAICS code 339930, indicating the focus on other miscellaneous artistic and craft product manufacturing, and is managed by the Arizona Purchasing Department with a response deadline of August 7, 2026. The place of performance is not specified beyond the state level, and all deliveries must support the needs of public schools across Arizona. Compliance with safety certifications and consistent quality control are essential for award consideration.

Purchasing Department

POSTED

DEADLINE

Supply of Team Sports EquipmentNorthside ISD is seeking qualified suppliers to provide team sports equipment for K–12 physical education programs, including basketballs, soccer balls, volleyballs, footballs, nets, goals, and associated accessories. The contract, classified as a subcontract under NAICS code 339930, is open for bids with a response deadline of August 12, 2026, and was posted on July 21, 2026. Equipment must meet the district’s specifications for durability, safety, and suitability for use by students across all grade levels. The gear will be distributed to schools within the Northside Independent School District in Texas, though the exact delivery locations are not specified. Bidders should ensure compliance with quality standards and readiness to fulfill orders as needed throughout the school year. All submissions must be made through the provided online portal prior to the deadline.

POSTED

DEADLINE

Arts & Crafts Supplies SupplyThe contract pertains to the supply of non-toxic, certified arts and crafts materials specifically designed for use in K–12 educational settings, encompassing items such as crayons, chalk, modeling clay, paints, brushes, and associated supplies. All products must meet stringent safety and certification standards to ensure they are suitable for children, with an emphasis on compliance with applicable regulations for non-toxicity and educational use. The solicitation is structured as a subcontract under the Purchasing Department of California, with the North American Industry Classification System code 339930 indicating manufacturing of other plastic product manufacturing, aligning with the production of art materials. Responses are due by August 7, 2026, at 6:00 PM, and the contract was posted on July 17, 2026. Performance of the contract will occur within California, though specific city or zip code details are not provided. The opportunity is available through the California Procurement Portal, and interested vendors should review the full posting at the provided URL to ensure adherence to all technical, safety, and delivery requirements. While no set-aside designation is specified, contractors are expected to meet all certification and compliance obligations tied to educational product standards.

Purchasing Department

POSTED

DEADLINE

MIL-STD-129 Packaging and Marking ServicesThe contract involves the final packaging, labeling, and barcoding of an electronic module to meet MIL-STD-129 standards for logistics and shipment under the Defense Logistics Agency. This subcontract ensures all packaging and marking procedures comply with military specifications for traceability, durability, and uniformity across DLA supply chains. The work must align precisely with federal requirements for identification, documentation, and labeling to facilitate seamless receipt, storage, and distribution within Department of Defense logistics networks. The NAICS code 339930 indicates this falls under other miscellaneous manufacturing, specifically supporting defense-related electronic component handling. The contract was posted on July 13, 2026, and is tied to the award identifier SPE7M526P1709 with performance expected to support DLA’s nationwide and global distribution infrastructure.

Defense Logistics Agency

POSTED

DEADLINE

Identification Plates & Equipment MarkingThe contract entails the design and application of durable, bilingual identification plates, warning labels, and UID-compliant markings for military equipment, spare parts, and containers, ensuring compliance with standardized tracking and identification requirements. The work must produce resilient, long-lasting markings suitable for harsh operational environments, with all text and symbols presented in both English and French to meet Canadian official language obligations. The markings must adhere strictly to UID standards to enable accurate asset tracking across the Department of National Defence’s logistics and inventory systems. This is a subcontract opportunity issued by the Government of Canada, specifically under the Department of National Defence, with a stated place of performance in Ottawa. The solicitation was posted on July 8, 2026, and responses are due by August 18, 2026. The North American Industry Classification System code 339930 indicates that the work falls under other miscellaneous manufacturing, consistent with the production of specialized identification and labeling products. No specific set-aside provisions are outlined, and no point of contact information is provided, leaving all inquiries to be addressed through the official tender portal.

Department of National Defence

POSTED

DEADLINE

Branded Promotional Products (Non-Apparel)Cypress-Fairbanks ISD is seeking qualified vendors to supply non-apparel promotional items featuring district branding, including mugs, water bottles, banners, stickers, and event giveaways. The contract, classified as a subcontract under NAICS code 339930, is open for responses until June 30, 2027, with all solicitations posted as of July 1, 2026. Products must meet the district's specifications for quality, durability, and consistent application of official branding elements to ensure uniform representation across all promotional uses. Vendors are expected to handle customization, fulfillment, and timely delivery to support district events and outreach initiatives throughout the contract period. The opportunity is accessible via the Texas SmartBuy portal, and while no specific set-aside preferences or point of contact are listed, compliance with procurement guidelines and ability to meet volume demands are essential for consideration.

CYPRESS-FAIRBANKS ISD

POSTED

about 1 month ago

DEADLINE

Military-Compliant Packaging and Preservation Services

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Tactical Survival Knife Supply

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

ADAPTER, STRAIGHT, FL

Solicitation # SPE7M3-26-T-7812

The contract specifies the procurement of a straight flange-to-tube adapter with part number S1E10204 ITEM 3 and S2C10134-4MF from VACCO INDUSTRIES, identified by NSN 4730014763684. One unit is required to be delivered within 20 days of contract award with FOB origin terms, and the item is classified as a critical application item subject to stringent quality and handling requirements. All supplies must comply with DLA packaging standards per RP001 and MIL-STD-2073-1E for packaging, with marking conforming to MIL-STD-129 and no special marking codes applied. Mercury and mercury compounds are strictly prohibited from intentional addition or direct contact with the hardware except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The delivery is addressed to USS HYMAN G RICKOVER in Groton, CT, with shipment required via the fastest traceable method—parcel post is explicitly forbidden. The contract is governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect as of the solicitation issue date controlling compliance. The unit of issue is each, with zero variance allowed in quantity, inspection and acceptance occur at destination, and the contract number is SPE7M3-26-T-7812 with a required delivery date of July 23, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

ADAPTER, STRAIGHT, PI

Solicitation # SPE7M3-26-T-7813

The contract is for one straight pipe-to-hose adapter with NSN 4730-01-708-4070 and part number 00J99200, issued under solicitation SPE7M3-26-T-7813 through the Department of Defense’s Defense Logistics Agency. Delivery is required within 20 days to the USS Cleveland (LCS 31) at FPO AA 34085, with the shipment to be delivered FOB destination and inspected and accepted at the point of delivery. Exact quantity of one unit is mandatory with zero variance permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and marking instructions, and palletization must follow DLA packaging requirements. The item must not contain any class I ozone-depleting chemicals or intentionally added mercury, except in limited exempted applications such as batteries or instruments specified by NAVSEA, and any mercury-containing devices must have dual containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Transportation must use the fastest traceable method and exclude parcel post, and vendor shipping details are to be submitted using the designated VSM code. The required delivery date is July 29, 2026, and the contract includes detailed government-only identifiers and point of contact information for William Cain at DLA.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE7M4-26-T-298F

Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the Berry Amendment threshold lowered to $150,000, requiring full disclosure of any non-domestic materials and adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. The solicitation prohibits the use of covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016, and excludes additive manufactured parts unless prior approval is obtained. Small business joint ventures must submit required representations for eligibility under designated small business categories. Due to fluctuating demand, offerors are strongly encouraged to quote quantity ranges to enable efficient award decisions without resolicitation, though this flexibility does not apply to Auto IDC. All vendors must register through DLA’s new AMPS system to access the Vendor Shipment Module and continue shipping, with WebServices users required to update their schema by the specified deadline. Offers submitted after the closing date must include a “No Bid” submission on DIBBS with an anticipated quote date or reason for non-submission to avoid administrative delays. The solicitation is a total small business set-aside under NAICS 332613 for 6 helical compression springs with an ADO of 143 days. Compliance with all representations, certifications, and procedural notices is mandatory for award eligibility.

Spring Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-7809

This solicitation is for 43 units of a NIPPLE, BOSS with NSN 4730-01-241-2931, issued under solicitation number SPE7M3-26-T-7809 by the Department of Defense’s Fluid Handling Division. The item is designated as a restricted source product, meaning only the prequalified manufacturer(s) referenced in the solicitation are eligible to supply it, as it must be manufactured strictly to the OEM drawing specifications cited. Offers based on parts from other manufacturers will not be accepted unless accompanied by comprehensive technical data sufficient for evaluation under DLAI 3200.1, Enclosure 6. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed as per RQ011. The contract has a 130-day delivery window following award and is classified under NAICS code 332996. The place of performance is set at New Cumberland, Pennsylvania, with a delivery address zip code 17070-5002. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026. Primary point of contact for inquiries is William Cain, reachable via email at william.cain2@dla.mil or phone at 614-692-5347. The solicitation is publicly accessible through the DIBBS platform, and all proposers must adhere to the referenced technical, quality, packaging, and identification requirements as outlined in the governing DLA standards. Failure to meet these specifications may result in rejection of the offer.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-298H

This contract specifies the procurement of metallic tubing with precise technical requirements: it must be made of aluminum alloy, Type 1, T4 temper, seamless, with a 1.00 inch diameter, 0.065 inch wall thickness, and 144.0 inch length, conforming to SAE AMS-WW-T-700/6C Revision C dated 09/01/2015. The tubing is subject to strict environmental prohibitions, including a complete ban on Class I ozone-depleting chemicals, overriding any conflicting specification requirements unless substitute chemicals are approved. Packaging must comply with MIL-STD-2073-1E and ASTM B660, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging guidelines, and all items are to be delivered FOB origin with a permitted quantity variance of plus or minus 10%. Inspection and acceptance occur at the destination, and the entire shipment must arrive within 120 days of the contract award. The contract calls for 359 linear feet of tubing under NSN 4710-01-441-8265, with a total price based on unit pricing and a required delivery by August 30, 2026, though an earlier ship date of June 9, 2026 is requested. The acquisition is structured as a total small business set-aside under NAICS code 331210 and managed by the Department of Defense’s Fluid Handling Division. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLA procedural notes C19 and C20. The solicitation opened August 3, 2026, with responses due by August 14, 2026, and official inquiries are to be directed to Trenton Miller at DLA. All packaging, marking, and documentation must align with DLA’s master standards and unit of issue guidelines as referenced in official DoD and ANSI X12 sources.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-7811

This contract covers the procurement of one unit of a hose clamp with NSN 4730-01-440-2379 under solicitation SPE7M3-26-T-7811, issued by the Department of Defense’s Fluid Handling Division. Delivery is required within 20 days to Fort Hood, Texas, with FOB origin terms and no quantity variance allowed. The item must be packaged in compliance with ASTM D3951 and marked according to MIL-STD-129, with palletization following DLA’s Packaging Requirements for Procurement. All technical and quality specifications referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements take precedence over any other standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Cybersecurity compliance requires a CMMC Level 2 self-assessment. Shipment must be sent via the fastest traceable means, excluding parcel post, to the designated government facility at Fort Hood. The contract mandates precise labeling and identification using the provided military freight and mark-for addresses, including the TCN W4546G62020253 and RDD 217. The required delivery date is July 28, 2026, with the solicitation issued on August 3, 2026 and responses due by August 14, 2026. Contact for inquiries is William Cain, with the unit of issue confirmed as each. The contract is governed by DoD procurement standards, and all documentation must align with the official DLA unit of issue guidelines.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

ADAPTER, STRAIGHT, TU

Solicitation # SPE7M4-26-T-298E

Offerors responding to solicitation SPE7M4-26-T-298E for 11 straight tube adapters must adhere to strict compliance requirements regarding domestic sourcing, telecommunications equipment, and manufacturing methods. The Berry Amendment applies with a reduced threshold of $150,000, and contractors must disclose any use of non-domestic materials under DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Covered telecommunications equipment or services are prohibited under FAR 52.204-24 and DFARS 252.204-7016. Additive manufacturing is not permitted unless specifically approved by the contracting officer, and offers containing AM-produced items will be deemed ineligible for award. Small business joint ventures must submit required representations under FAR provisions 52.212-3 and 52.219-1 for applicable small business categories. Vendors are strongly encouraged to quote quantity ranges due to fluctuating demand, as this facilitates award flexibility without administrative delay, though this does not apply to Auto IDC. Fast Pay is not available for this solicitation. All contractors must register through DLA’s Account Management & Provisioning System to access the Vendor Shipment Module, with schema updates required for WebServices users by April 23, 2025. Failure to comply with AMPS registration will result in loss of shipping capability. For any anticipated inability to quote by the closing date, a “No Bid” submission on DIBBS is mandatory to avoid assumptions of non-responsiveness. The point of contact for inquiries is Blake Tushar, and the delivery requirement is 46 days ADO from Tinker AFB.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

FERRULE, BRAZING, TUBE F

Solicitation # SPE7M3-26-T-7808

This contract mandates the procurement of a ferrule for brazing tube fitting, designated as a critical application item with restricted sourcing, requiring prior engineering approval from the government design control activity. Only three approved suppliers—TPS 07649 with part number 88496, 81755 with part number 16VP128-3, and 07582 with part number 3507A001—are authorized to fulfill this requirement, with Technetics Group Daytona, Inc. and Senior Operations LLC explicitly named as qualified sources. The item is subject to stringent quality and technical standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications, including ASTM D3951 for packaging. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; all unspecified attributes are considered major and acceptance requires zero non-conformances in the sample lot. The contract specifies the delivery of 34 units, each identified by NSN 4730-01-219-8323, with a firm delivery schedule of 188 days from the contract award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must adhere strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA packaging requirements, and no variance in quantity is permitted. The unit of issue is each (EA), and all packaging must be in compliance with the contract’s specified QUP and DLA standards. The delivery destination is DLA Distribution San Diego, and the item must be shipped by the required date of February 19, 2027. The solicitation, issued under SPE7M3-26-T-7808, is a total small business set-aside under NAICS code 332912, with bids due by August 14, 2026, and the primary point of contact is William Cain of the Fluid Handling Division.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

SEAL, METALLIC, NONAI

Solicitation # SPE7M4-26-T-298C

The contract specifies the procurement of one metallic non-ai seal with NSN 2835-01-732-7814 and part number 16196 from Eaton Corporation, to be delivered FOB origin within 392 days of contract award, with no tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes, and palletization in accordance with DLA standards. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Delivery is directed to DLA Distribution Cherry Point in North Carolina, with inspection and acceptance occurring at the destination. Transportation logistics are governed by DLA procedural notes C19 and C20, and all unit of issue requirements align with DoD standards. The solicitation was issued under SPE7M4-26-T-298C with a response deadline of August 14, 2026, and the item falls under NAICS code 333611 for fluid handling systems. The primary point of contact is Rory O’Reilly of the Department of Defense’s Fluid Handling Division.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 13 hours ago

DEADLINE

PARTS KIT, HYDRAULIC

Solicitation # SPE7M4-26-Q-0899

This contract is for a Parts Kit, Hydraulic Pump with NSN 4320-00-928-5138 and a quantity of 215 units, supplied by Eaton Aerospace, LLC under part number 914353. It is classified as a restricted source item requiring government engineering source approval and mandates compliance with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management via Engineering Change Proposal and Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. All supplies must adhere to MIL-STD-2073-1E for preservation and packaging, with marking conforming to MIL-STD-129 and palletization governed by DLA packaging standards. The item is designated as a critical application and must meet sampling standards per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and all attributes are assigned strict verification levels or AQLs. Delivery is due within 400 days after award, with FOB origin, inspection and acceptance at destination, and a strict zero percent variance in quantity allowed. Packaging and shipping instructions direct delivery to the DLA Distribution Depot at Hill AFB, Utah, and transportation guidelines are governed by specific DLA procedural notes. The contract’s solicitation was issued on August 3, 2026, with a response deadline of August 10, 2026, and the material is needed for delivery by March 7, 2028.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-7814

The contract specifies the procurement of a TEE, TUBE item with NSN 4730-01-688-0380, quantity of six units, at a total contract value of $6.00, delivered FOB origin within 20 days after order placement, with the original required delivery date set for July 30, 2026. Delivery is to the USNS MIGUEL KEITH T-ESB #5 at 3380 Sturtevant Street, San Diego, CA 92136, and all shipments must adhere to DLA’s packaging standards, including compliance with ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization. The unit of issue is each (EA), and the quantity per unit pack must match the contract specification. The use of Class I ozone-depleting chemicals is strictly prohibited and supersedes any conflicting specification, with substitute chemicals requiring prior approval unless explicitly authorized. All packaging must be labeled according to MIL-STD-129, including 2D Data Matrix barcodes, and hazardous materials must be marked and documented per 29 CFR 1910.1200 and DFARS 252.223-7001, with required Safety Data Sheets submitted prior to award. Inspection and acceptance occur at the destination, with payment to be processed electronically via Wide Area WorkFlow using an Invoice and Receiving Report. The contract incorporates numerous FAR and DFARS clauses addressing employment practices, trafficking in persons, cybersecurity, safeguarding covered defense information, conflict of interest, ozone-depleting substances, hazardous material handling, and the use of U.S.-flag vessels for ocean transportation. Offerors must possess a valid Unique Entity ID and CAGE code, and are required to self-certify small business status and any applicable socioeconomic designations. The solicitation is open through August 14, 2026, via the DIBBS portal, and the contracting office is the DLA Fluid Handling Division, with William Cain as the primary point of contact. No contract type is explicitly identified, but the low dollar value and simplified acquisition context suggest it may fall under a simplified procedure. All technical and quality requirements referenced by R or I numbers in the DLA Master List take precedence over other standards.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-7810

The contract specifies the procurement of 10 units of a 90-degree elbow made from chromium-molybdenum steel conforming to ASTM A182 Grade F11, with a 2-inch nominal pipe size and 3000-pound series rating, featuring identical unthreaded socket-weld ends manufactured via forging. The item must comply with the ASME B16.11-2021 standard and all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitute materials require prior approval. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA Packaging Requirements, and all items must be marked and labeled accordingly. The unit of issue is each, with no variance allowed in quantity, and all deliveries are FOB origin with inspection and acceptance occurring at the destination. Delivery is required within 128 days of contract award, with a specified ship date of December 21, 2026, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE7M3-26-T-7810 with NSN 4730-00-249-3981 and purchase request 7017696230, under full and open competition with no set-aside restrictions. Configuration changes require an engineering change proposal or variance request, and removal of government identification from non-accepted supplies is mandated. Tooling for forging must be procured or developed by the contractor, and any sourcing inquiries should be directed to the appropriate DLA supply chain team. The contract references DLA Procurement Notes C19 and C20 for transportation guidelines, and all units must be shipped in compliance with the specified DLA packaging and marking standards.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE