Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging & Marking

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with MIL-STD-2073-1E for the preservation and packaging of connectors, ensuring protection against environmental damage during storage and transit, and adherence to MIL-STD-129 for labeling that includes accurate National Stock Number, part number, lot traceability, and barcode formatting in accordance with DLA logistics standards. All packaging must be engineered to maintain serial and batch integrity throughout the supply chain, with each unit clearly identified and documented to support military inventory and deployment systems. Work is to be performed at the specified location in Tracy, California, with a strict deadline for response by July 30, 2026, and the contract is classified as a subcontract under NAICS code 493190, administered by the Department of Defense’s Active Devices Division. All deliverables must meet exacting federal defense logistics requirements, with no flexibility in labeling or packaging standards, and the successful contractor must demonstrate proven capability in military-grade packaging and traceability systems to ensure seamless integration into DLA’s distribution network.

General Info

Comply with MIL-STD-2073-1E and MIL-STD-129 for defense-grade packaging, labeling, and traceability in Tracy, California by July 30, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging and marking of connectors per MIL-STD-2073-1E (preservation and packing) and MIL-STD-129 (labeling), including NSN, part number, lot traceability, and barcode compliance for DLA logistics.

Similar Contracts

Same NAICS industry code

Equipment Racks -19CABSLittle Rock Air Force Base is soliciting bids for HUSKY Equipment Racks under solicitation number FA446026Q0026, with a total small business set-aside designation as defined by FAR 19.5, meaning only small businesses are eligible to compete. The solicitation, posted on July 10, 2026, requires all submissions to comply strictly with attached documentation, and responses must be received no later than July 24, 2026, at 7:00 PM Eastern Time. The contract falls under NAICS code 493190, which relates to other support activities for transportation, and performance will occur at Little Rock Air Force Base in Arkansas, zip code 72099. The contracting office is part of the Department of Defense under the 19 Cons Pka organization, and primary point of contact is Amaya Jordan, reachable via email and phone, with Paul Denton serving as the secondary contact. All interested parties must submit proposals through the official SAM.gov portal linked in the solicitation.

FA4460 19 Cons Pka

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Packaging and LabelingThe contract titled Hazardous Materials Packaging and Labeling requires comprehensive services for the safe packaging, hazard labeling, and documentation of technical and hazardous shipments in full compliance with Department of Defense and federal regulatory standards. All activities must meet stringent safety and compliance protocols to ensure secure handling, transport, and traceability of sensitive materials throughout the supply chain. The scope encompasses accurate identification of hazardous contents, proper application of labeling systems, and preparation of all required documentation aligned with current DoD and federal guidelines. This subcontract is open for response until July 30, 2026, and is administered by the Maritime Supply Chain ESOC Buys under the Department of Defense. The place of performance is designated as FPO with a ZIP code of 96694-2900, indicating operations will center on military postal locations, likely supporting overseas or expeditionary logistics. The NAICS code 493190 signifies that the work involves other transportation support activities, specifically focused on hazardous materials handling. The contract does not specify a set-aside type, and no point of contact details are provided, requiring potential bidders to review the official DIBBS portal for additional submission instructions and requirements.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Packaging, Labeling, and Preservation ServicesThe contract requires the provision of packaging, preservation, and labeling services for searchlight units in strict accordance with military standards, ensuring compliance with all applicable regulations for fragile handling and hazardous material identification where necessary. The work must be executed to safeguard equipment integrity during transport and storage, with detailed attention to preservation methods and accurate labeling protocols that meet Department of Defense specifications. This subcontract is issued under NAICS code 493190 by the Aviation Supply Chain ESOC Buys office within the Department of Defense, with performance located at FPO 96698. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026. While no set-aside status or point of contact is specified, interested parties must adhere to the military compliance requirements outlined in the task and submit their proposals through the designated DIBBS platform prior to the deadline.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires comprehensive packaging and marking services in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling and marking requirements, specifically for defense logistics shipments. All items must be properly labeled with National Stock Numbers, Department of Defense Activity Address Codes, and unit-level identifiers to ensure accurate tracking and inventory management across the military supply chain. The work is to be performed at Fort Stewart, Georgia, with a zip code of 31314-5185, and is classified under NAICS code 493190 for other transportation support activities. This is a subcontract opportunity issued by the Aviation Supply Chain ESOC Buys under the Department of Defense, with a response deadline of July 27, 2026, and a posted date of July 19, 2026. Contract performance is critical to maintaining readiness and logistical accuracy for defense operations.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Military-Compliant Packaging and LabelingThe contract requires the provision of unit-level and bulk packaging for spring washers in full compliance with MIL-STD-129 and RP001 standards, ensuring all packaging meets rigorous military specifications for labeling, traceability, and secure handling. Each lot must be properly identified and documented to maintain full accountability from production through delivery, with attention to detail in marking, barcoding, and documentation to support logistics and inventory management within defense supply chains. The work must be performed with strict adherence to quality control protocols to guarantee compatibility with Department of Defense distribution and storage systems. Performances are to be delivered to New Cumberland, Pennsylvania, with a response deadline of July 27, 2026, and the solicitation falls under NAICS code 493190, indicating it is for other warehousing and storage services. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with no set-aside provisions specified. All parties must ensure that packaging operations align precisely with federal military requirements, including documentation integrity and physical security throughout the packaging and staging process to safeguard defense-critical components. The contract is accessible via the DIBBS platform for qualified subcontractors seeking to fulfill these specialized packaging obligations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging and preservation services adhering to MIL-STD-2073-1E standards, ensuring items are protected through air evacuation, dry climate control, enclosed containerization, and jute cloth cushioning to meet rigorous defense requirements. All packaging must be palletized in accordance with DLA RP001 specifications to ensure safe handling, transport, and storage. The work is to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000. This subcontract opportunity, issued under NAICS code 493190 by the Department of Defense through DLA Dist San Joaquin, is open for responses until July 30, 2026, with a solicitation posted on July 19, 2026. All parties must comply fully with the technical and procedural requirements outlined to fulfill the terms of this defense-related packaging obligation.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires compliance with MIL-STD-129 standards for the packaging, marking, and labeling of hose assemblies, including the generation of barcodes and the proper application of hazardous material indicators as mandated. All work must be performed to meet exacting military specifications to ensure traceability, safety, and readiness during logistics and deployment. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses are eligible to submit proposals, in alignment with FAR 19.5. The North American Industry Classification System code 493190 identifies the work within the warehousing and storage sector, specifically tied to the handling of military-related logistics. The contract is issued by the Fluid Handling Division within the Department of Defense, with performance required at a facility in New Cumberland, Pennsylvania, ZIP code 17070-5002. Proposals must be submitted by the deadline of July 30, 2026, and the opportunity was posted on July 19, 2026, allowing for a twelve-day response window. The contract type is a subcontract, indicating it is likely part of a larger prime contract for military supply chain support. Interested parties can access the full solicitation through the DIBBS system using the provided link, and all work must ensure full adherence to defense logistics protocols without exception.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Packaging, Labeling, and RFID Services for DLA ShipmentsThe contract requires the provision of fully compliant packaging, labeling, and passive RFID tagging for shipments destined for the Defense Logistics Agency, with strict adherence to military standards for preservation and palletization. All items must be labeled with the correct National Stock Number, unit of issue, and quantity, ensuring traceability and readiness for military logistics systems. The service includes end-to-end handling from packaging through RFID tagging to ensure seamless integration into DLA’s inventory and distribution networks. The solicitation is categorized as a subcontract under NAICS code 493190 and is open for responses until July 30, 2026, with a posting date of July 19, 2026. The contract is managed by the Fluid Handling Division within the Department of Defense, and performance is expected to align with federal military logistics requirements, though no specific location for performance or point of contact is provided. Bidders must ensure full compliance with all technical and procedural specifications to meet DLA’s operational needs without deviation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

MIL-STD-129 Packaging, Marking, and BarcodingThe contract requires the packaging and marking of shaft assemblies in strict accordance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking and barcoding, ensuring all items meet Department of Defense standards for storage, handling, and identification. This includes the precise application of Data Matrix barcodes and full compliance with Defense Logistics Agency packaging requirements to facilitate accurate tracking and logistics integration throughout the supply chain. The work must be performed by a small business as this is a Total Small Business Set-Aside under SBA regulations, and the NAICS code 493190 indicates it falls under Other Support Activities for Transportation. The place of performance is designated as Hill AFB, Utah, with a submission deadline of July 27, 2026, and the solicitation is issued under the Department of Defense’s ASC Supplier Operations AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging and preservation of defense hardware strictly in accordance with MIL-STD-2073-1E standards, ensuring defense-grade protection through clean-and-dry methods and the exclusive use of mercury-free materials throughout the process. All packaging must meet Department of Defense logistical requirements, including DLA-compliant palletization to ensure uniform handling, storage, and transport compatibility across military supply chains. The work must be executed at the designated place of performance, Tinker Air Force Base, with full adherence to federal defense specifications and environmental safety protocols. This subcontract opportunity, posted on July 19, 2026, with a firm response deadline of July 27, 2026, is classified under NAICS code 493190 for other transportation support activities and is managed by the ASC Commodities Division within the Department of Defense. Contractors must possess the technical capability to meet stringent military packaging standards, maintain quality control throughout preservation, and demonstrate compliance with all DLA logistics directives. The solicitation invites qualified subcontractors to submit proposals through the DIBBS platform, with no set-aside provisions specified, making it open to all eligible entities capable of fulfilling the technical and operational demands.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires precise packaging, labeling, and palletizing of defense components in full compliance with military standards for shipment to Fort Campbell, Kentucky. All work must adhere to MIL-STD-129 marking requirements and DLA RP001 configuration protocols to ensure consistency, traceability, and readiness for military logistics operations. The subcontract encompasses the end-to-end handling of defense materials, from secure packaging to pallet assembly, with strict attention to documentation, barcode accuracy, and physical integrity throughout the process. The solicitation is categorized under NAICS code 493190 and is issued by the Department of Defense through its Land Supply Chain organization. Responses are due by July 30, 2026, with the solicitation posted on July 19, 2026. The place of performance is specifically designated as Fort Campbell, with the ZIP code 42223-0000, indicating the final delivery point is fixed and must be met without deviation. This is a subcontract opportunity with no set-aside designation, open to qualified contractors capable of meeting the rigorous defense logistics standards required for military readiness.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Defense-Compliant Packaging & PreservationThe contract requires compliance with MIL-STD-2073-1E for the packaging and preservation of RF coils, specifying preservation method 41 which mandates a clean and dry environment to prevent degradation during storage and transit. The unit container must adhere to design D3, ensuring proper structural integrity and protection for the sensitive equipment, while the outer packaging must bear the identifier M to align with standardized military labeling protocols. This work is classified as a subcontract under the NAICS code 493190, indicating it falls within other transitory and warehousing activities, and is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office. Performance is anchored at Chambersburg, Pennsylvania, with the zip code 17201-4150 as the designated place of performance, ensuring logistics and delivery coordination align with military supply chain requirements. Bidding responses are due by July 30, 2026, with the solicitation posted on July 19, 2026, providing vendors a limited window to submit proposals for this defense-compliant packaging task.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

SWITCH, RADIO FREQUEThis contract solicits two units of a radio frequency switch with part number 5985-01-463-5144, under solicitation SPE7M5-26-T-336M, for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and must meet or exceed the specifications of the cited technical data even if incomplete. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with designated verification levels or AQLs. The supplier must ensure all packaging complies with MIL-STD-2073-1E and MIL-STD-129, with special emphasis on ESD and EMI protection as mandated by MIL-PRF-81705, using only materials from qualified manufacturers listed on QPL-81705. ESD protection requires Type I barrier material and Type III wrap unless specified otherwise, and EMI protection requires Type I barrier material. Components with pins or leads must have adequate cushioning to prevent physical damage during handling and transport, and all packaging must be executed at approved ESD/EMI protective workstations. The item is subject to DOD Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and the supplier is responsible for adherence to DLA packaging requirements, including proper marking with special code 39 indicating ESD-sensitive electronic device status. Delivery is due in 157 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract includes specific transportation instructions per DLAD Proc Note C19 and C20, with a required delivery date of November 26, 2027, and a need ship date of January 5, 2027.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

COVER, ELECTRICAL COThe contract pertains to the procurement of 10 units of a COVER, ELECTRICAL CONNECTOR identified by NSN 5935-01-589-5332 and part number 923371, manufactured by ERNI COMPONENTS INC DBA 6V439. The item must be delivered within 20 days of contract award FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging and marking must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129, and Fed-Std-313, with non-hazardous items requiring commercial packaging per ASTM D3951 unless superseded by a更高 priority DLA requirement. Palletization must adhere to RP001, and each unit pack must reflect the specified QUP of 001. The delivery is directed to the Royal Jordanian Air Force at Muwaffaq Salti AB in Jordan, with transportation governed by DLAD Proc Notes C19 and C20. The item is marked for government use under the reference W81NMJ61920043, with an original required delivery date of July 16, 2026, and is issued under solicitation SPE7M5-26-T-336L. The unit of issue is each, priced at $10.00 per unit, totaling $100.00, and the contract is assigned NAICS code 335931 with primary point of contact Margaret Smith from the Department of Defense’s Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

MICROCIRCUIT, DIGITAThe contract pertains to the procurement of three digital microcircuits with NSN 5962-01-233-4079 under solicitation SPE7M5-26-T-336N, with a delivery schedule of 222 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is classified as qualified under FSC 5962 and must comply with the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List as outlined in Procurement Note M01. Physical identification and marking of the bare item are required per RQ017, and packaging must adhere to DLA packaging standards. The contractor is obligated to retain complete supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016, ensuring end-to-end provenance throughout the supply chain. Government identification must be removed from any non-accepted supplies. The solicitation is open for responses until July 31, 2026, with the point of contact being Margaret Smith of the Department of Defense's Active Devices Division, based in Columbus, Ohio. The NAICS code 334413 indicates the procurement falls under semiconductor and related device manufacturing. An alternate offeror must submit a complete data package covering both the primary and alternate part specifications.

Semiconductor and Related Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

MICROCIRCUIT, LINEARThis contract is for the procurement of 26 units of a linear microcircuit, identified by NSN 5962-01-051-2101, under solicitation SPE7M5-26-T-336S, which is a total small business set-aside with a NAICS code of 334413. The item falls under Federal Supply Class 5962 for electronic microcircuits and is subject to stringent quality, traceability, and packaging requirements mandated by the Defense Logistics Agency. All suppliers must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and must be qualified under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for FSC 5961 and 5962. Traceability documentation must be meticulously maintained in accordance with DLA Directive Procurement Note C03 and submitted via the DLA Land and Maritime Form 918, which must be emailed to the contract administrator at least 15 days prior to delivery with all attachments compressed to under 15 MB and properly labeled. Shipment is prohibited until explicit written authorization is received, and failure to comply with documentation accuracy or timing voids payment eligibility. The contractor must also adhere to physical marking requirements per IPC/JEDEC J-STD-609 for lead finish identification on each unit pack, and conform to DLA packaging standards and bare item marking specifications. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal authorization from DLA. Any disclosure to foreign nationals, regardless of location, is prohibited without authorization. The government will not accept surplus material, and all deliveries must be made to Columbus, Ohio within 221 days of award. Primary point of contact for inquiries is Cindy McAninch of the Department of Defense’s Active Devices Division, with all submissions and communications routed through the designated DLA systems and protocols.

Semiconductor and Related Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

FILTER, RADIO FREQUEThis contract specifies the procurement of a radio frequency interference filter with NSN 5915-00-726-7326 and part number 46438-1, supplied by ONTIC ENGINEERING & MANUFACTURING, INC., HONEYWELL INTERNATIONAL INC., and EMS DEVELOPMENT CORPORATION. The requirement is for 16 units to be delivered FOB origin within 50 days, with no tolerance for quantity variance, and inspection and acceptance occurring at the destination. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling; non-hazardous items must be commercially packaged per DLA guidance, while hazardous items must adhere to TQ requirement IP025. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the unit of issue is each. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the supplier must remove government identification from non-accepted items. The solicitation number is SPE7M5-26-T-336P, issued by the Department of Defense’s Active Devices Division, with a response deadline of July 31, 2026, and an original delivery due date of September 12, 2027. Shipments must follow DLAD Proc Notes C19 and C20, and all documentation must align with the approved unit of issue per the DLA reference link.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 2 hours ago

DEADLINE

CONNECTOR, RECEPTACLThe contract is for a single unit of a connector, receptacle, identified by NSN 5935-01-376-1977, under purchase request 7017539670, with delivery required within 20 days after award. It is issued under solicitation number SPE7M5-26-T-336K, posted on July 20, 2026, with responses due by July 31, 2026. The procurement falls under NAICS code 334417 and is managed by the Active Devices Division of the Department of Defense, with performance located in Martinsburg, West Virginia, zip code 25405-7704. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The contractor must comply with DLA packaging requirements and adhere to physical identification and bare item marking standards. Government identification must be removed from non-accepted supplies. The offeror is required to provide a complete data package for both the approved and alternate part, as no data is currently available. Primary point of contact is Margaret Smith, reachable via email and phone provided.

Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

LIGHT EMITTING DIODThis contract specifies the procurement of a light emitting diode item identified by part number 81000-44019 from KOITO MFG CO. LTD, with the NSN 5980-01-652-7500, under solicitation SPE7M5-26-T-336Q. The item is classified as a critical application item and must comply with stringent military and federal standards including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Full supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and the item requires Federal Aviation Administration airworthiness approval. Packaging and preservation must follow DLA-specific requirements, including dry packaging methods and E5 unit containers, with no special marking applied. The delivery is FOB origin, to be inspected and accepted at destination, with a fixed quantity of 7 units and zero tolerance for variance. The required delivery date is January 3, 2027, with a 157-day allowable delivery window. All manufacturing and inspection must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in sampling unless otherwise directed. Critical attributes are assigned verification level VII and an AQL of 0.1, major attributes level IV and AQL 1.0, and minor attributes level II and AQL 4.0. The item is subject to FAA bare item marking requirements and the contractor must remove any government identification from non-accepted supplies. The unit price is $7.00, with a total contract value of $49.00. Delivery instructions direct shipment to the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation compliance must follow DLAD Procurement Notes C19 and C20. The contract was posted on July 20, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense’s Active Devices Division with primary point of contact Margaret Smith.

Metal Window and Door Manufacturing

POSTED

about 2 hours ago

DEADLINE

CONNECTOR BODY, RECEPTA

Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

BACKSHELL, ELECTRICAThe contract specifies the procurement of 14 units of a backsHELL, ELECTRICA with NSN 5935-01-244-6487 under solicitation SPE7M5-26-Q-0742, requiring firm fixed pricing with no variance in quantity. The item is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including compliance with SAE-AS85049C and MIL-C-85049A specifications, and is subject to qualification under the Qualified Products List for connector assemblies. The use of ozone-depleting substances in any phase of manufacturing or processing is strictly prohibited without written approval from the contracting officer, and this restriction overrides all other specifications unless exempted for commercial items or part-numbered-only items. The item must be packaged in accordance with DLA Packaging Requirements, MIL-STD-129 labeling, and ASTM D3951 for non-hazardous materials, with all packaging and palletization adhering to RP001 guidelines. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania within 143 days after order date, with inspection and acceptance occurring at destination. The unit of issue is each, and transportation details follow DLAD procedural notes C19 and C20. The contract requires full and open competition, with no set-aside provisions, and the point of contact is Barbara Hoffmann of the Department of Defense’s Active Devices Division.

Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

POSTED

about 2 hours ago

DEADLINE

CAPACITOR, FIXED, MIC

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 2 hours ago

DEADLINE

Cybersecurity Compliance & CUI Safeguarding (NIST SP 800-171)The contract requires implementation and maintenance of NIST SP 800-171 controls to protect covered defense information in accordance with DFARS 252.204-7012, ensuring robust cybersecurity safeguards for Controlled Unclassified Information. This subcontract is under the Department of Defense’s Active Devices Division, with performance located in New Cumberland, Pennsylvania, and is subject to the NAICS code 541512, indicating it relates to computer systems design services. Compliance is mandatory and must be sustained throughout the contract lifecycle to meet federal cybersecurity standards for handling sensitive defense data. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, requiring timely submission of proposals demonstrating capability to meet all NIST SP 800-171 requirements. Contractors must be prepared to demonstrate full adherence to the 110 security controls across 14 families, including access control, audit, configuration management, and incident response, and must maintain continuous compliance through documentation, assessments, and reporting. Failure to meet these standards could result in contract termination or loss of eligibility for future DoD work.

Computer Systems Design Services

POSTED

DEADLINE