Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-compliant packaging and preservation services specifically tailored for long-term storage and transport of defense parts, ensuring compliance with strict military standards for protection, cushioning, and environmental resistance. The work must safeguard sensitive components against corrosion, physical damage, moisture, and other hazards during extended storage and transit under demanding operational conditions. All packaging solutions must meet or exceed established defense specifications to guarantee readiness and mission-critical reliability. The opportunity is classified as a subcontract under NAICS code 323110 and is associated with the Department of Defense’s Land Supplier Operations Vehicle Support division. The place of performance is designated as New Cumberland, Pennsylvania, with a response deadline of August 10, 2026. While no specific set-aside status is indicated, bidders must be prepared to demonstrate capability in delivering fully certified, defense-grade packaging systems that align with the operational demands of military logistics and inventory management. The solicitation is publicly accessible through the DIBBS portal for qualified subcontractors seeking to support defense supply chain integrity.

General Info

Military-compliant packaging for defense parts in New Cumberland, PA, due August 10, 2026, per DoD standards.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

323110 - Commercial Lithographic PrintingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide preservation, cushioning, and military-standard packaging for long-term storage and transport of defense parts.

Similar Contracts

Same NAICS industry code

Regulated Medical Device Packaging and Labeling

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Specialized Label Manufacturing and SupplyThe contract involves the manufacture and supply of a single specialized high-compliance label identified by NSN 7690-01-675-8991, strictly adhering to technical standards set by the Defense Logistics Agency, including MIL-STD-129 for labeling and ASTM D3951 for packaging requirements. The product must meet precise specifications to ensure compatibility with military logistics systems and durability under operational conditions. This is a subcontract opportunity issued by the Department of Defense through the Defense Logistics Agency, with the place of performance located in Greenville, South Carolina, at the zip code 29605-5410. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026, leaving a twelve-day window for potential vendors to submit proposals. The NAICS code 323110 indicates the work falls under printing and related support activities, specifically targeting businesses with expertise in high-precision labeling for federal applications. Although no set-aside classification is specified, the nature of the requirement suggests it is targeted toward contractors with prior experience in military-grade labeling and compliance. All submissions must be made through the DIBBS platform using the provided solicitation link to be considered.

Defense Logistics Agency

POSTED

DEADLINE

Medical Device Labeling and Barcoding (MMS No. 1 Compliance)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Compliant Packaging and Labeling for Medical SuppliesThe contract requires the preservation, unit sealing, and labeling of medical supplies to meet the stringent standards of MIL-STD-2073-1E and Medical Marketing Standard No. 1, ensuring full compliance with U.S. military distribution requirements. All work must be performed in accordance with these specifications to guarantee the integrity, sterility, and readiness of medical materials during transport and storage under demanding operational conditions. The packaging and labeling must support traceability, durability, and compatibility with military logistics systems throughout the supply chain. The solicitation is classified as a subcontract under NAICS code 323110, with a response deadline of August 3, 2026, and a posted date of July 29, 2026. Performance is required at Joint Base Pearl Harbor-Hickam, with the ZIP code 96853-5256. The contracting activity falls under the Department of Defense, specifically the Medical Supply Chain Pharm FSA, and the work must align with the military’s standards for operational readiness and compliance. The contract is open for submission via the DIBBS platform under reference number SPE2DP26Q0124, and bidders must ensure all technical and procedural requirements are fully addressed to be considered.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Specialized Label Manufacturing for DoD ComplianceThe contract requires the manufacture of one roll of Type I identification markers designated by NSN 7690-01-157-5159 and part number L300, with strict adherence to military standards including MIL-STD-129 for labeling, MIL-STD-2073-1E for packaging, applicable shelf-life requirements, and hazardous material labeling protocols. The product must be produced to meet all U.S. Department of Defense specifications to ensure compatibility and compliance across military logistics systems. The work is to be performed at Fort Stewart, Georgia, with a zip code of 31314-5185, and the project is classified as a subcontract under NAICS code 323110. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and is managed by the Defense Logistics Agency under the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Packaging & Kitting ServicesThe contract seeks providers to deliver custom kitting, packaging, and labeling services for medical and supply items in strict alignment with DLA’s RP001 specifications and commercial packaging standards, requiring serialized and barcoded labeling for precise traceability. These services will support the Department of Defense’s Medical Supply Chain Pharm FSA with operations centered at Joint Base Elmendorf-Richardson, Alaska, specifically at the 99506-4400 zip code location. The solicitation is classified as a subcontract under NAICS code 323110, with a response deadline of August 3, 2026, and was posted on July 28, 2026, indicating a five-day window for submissions. While no set-aside designation is specified, the contract emphasizes compliance with federal supply chain protocols and requires capability to meet exacting labeling and serialization requirements for medical inventory management. All proposals must be submitted through the DIBBS platform via the provided uiLink.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Packaging and Preservation Services for Military ShipmentThe contract requires the provision of packaging, preservation, and labeling services for military intercommunication units in strict accordance with MIL-STD-2073-1E Method 10, Wrap FA, Container D3, and MIL-STD-129 standards. These specifications dictate the exact procedures for protecting, preserving, and identifying equipment during transit to ensure operational readiness and compliance with Department of Defense requirements. All work must adhere to the technical parameters outlined in these military standards, including material selection, wrapping techniques, container specifications, and labeling formats for barcodes and military data tags. This is a subcontract opportunity issued under NAICS code 323110, indicating it falls within the Printing and Related Support Activities sector, though the actual work is focused on defense-specific packaging and logistics. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026. The contracting office is part of the Department of Defense under the Construction & Equipment T & IFO EQ organization, and performance is expected to support military supply chain operations, though the specific location of performance is not designated. Interested parties must submit proposals through the DIBBS system using the provided link prior to the deadline.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

MIL-STD-129 Marking and Labeling ServicesThe contract requires the application of durable, compliant labels in accordance with MIL-STD-129 standards for military unit packaging, including adherence to special handling codes ZZ05 and ZZ28, as well as proper hazardous material indicators and Department of Defense barcodes. All labeling must meet exacting military specifications to ensure traceability, safety, and regulatory compliance throughout the supply chain. The work is scoped for performance at Fort Bragg with a ZIP code of 28310, and the contracting activity falls under the Maritime Supply Chain within the Department of Defense. The solicitation, classified as a subcontract under NAICS code 323110, was posted on July 28, 2026, with a response deadline of August 10, 2026. All applicants must be prepared to deliver labeling services that meet rigorous defense standards, with full attention to accuracy, durability, and regulatory alignment.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Custom Imprint and Logo Application ServicesThe contract entails the custom imprinting of official university logos and branding on T-shirts using screen printing, heat transfer, or direct-to-garment techniques, with strict adherence to approved color specifications. The work must accommodate rush order demands, ensuring timely delivery without compromising quality or brand integrity. Services are to be performed under a subcontract arrangement, with the North Carolina entity at the University of North Carolina at Pembroke acting as the contracting authority. The solicitation was posted on July 28, 2026, and responses are due by August 11, 2026, under NAICS code 323110, which classifies the industry as commercial printing. All work is expected to meet institutional standards for logo application, and no specific location for performance has been designated beyond the state of North Carolina.

POSTED

DEADLINE

Medical Device Packaging and Preservation ServicesThe contract involves the design and execution of packaging solutions for medical devices, specifically requiring sealed unit containers and commercial-grade shipping containers that meet strict regulatory and operational standards. All packaging must adhere to RP001 guidelines for palletization and employ commercial preservation methods designated as PRES MTHD: ZZ and PRESV MAT: ZZ to ensure product integrity during storage and transport. The work encompasses end-to-end packaging processes, from initial design through to final preparation for shipment, with an emphasis on compliance, durability, and sterilization readiness. The performance location is designated as Fort Bliss, Texas, with the work supporting the Medical Supply Chain MD Surg FSF under the Department of Defense. Proposals must be submitted by August 3, 2026, and the opportunity is classified as a subcontract under NAICS code 323110, indicating it falls within the printing and related support activities sector, adapted here for specialized medical packaging applications.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MIL-STD-129 Compliant Labeling and Marking ServicesThe contract requires the design, production, and application of durable, bar-coded labels that adhere strictly to MIL-STD-129 specifications for military shipment and storage containers, ensuring full alignment with Department of Defense data standards. All labels must be engineered for long-term durability under harsh environmental conditions and must accurately encode required information such as item descriptions, serial numbers, lot numbers, and tracking identifiers in formats prescribed by federal military guidelines. The work involves precise label formatting, high-quality printing, and expert application to ensure scannability and compliance during inventory, logistics, and storage operations across the defense supply chain. The contract is classified as a subcontract under NAICS code 323110 and is issued by the LSO COMBAT VEHICLES AND ARMAMENT division of the Department of Defense, with performance designated at a location in Anniston, Alabama, with a zip code of 36201-4119. Interested parties must submit responses by the deadline of August 6, 2026, and the solicitation is accessible through the DIBBS platform under reference number SPE7L426T5835. There is no set-aside designation specified, and the contract does not indicate a point of contact, suggesting that all inquiries and submissions should follow standard DIBBS procedures for this procurement.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Specialty Packaging and Protective LabelingThe contract entails the design and supply of specialized protective packaging solutions aimed at preventing damage to items during transit. The packaging must include cushioning materials, rigid containment structures, and clear labeling systems organized by parish to ensure accurate identification and handling throughout the distribution process. The work is classified under NAICS code 323110, indicating a focus on printing and related support activities, and is structured as a subcontract under the Ministry of Justice and Constitutional Affairs of the Government of Jamaica. The solicitation was posted on July 24, 2026, with responses required by August 21, 2026, by 8:00 PM. All deliverables must meet the specified performance requirements for protection and labeling, with no set-aside provisions specified, and the place of performance is not detailed beyond the overseeing government entity.

Ministry of Justice and Constitutional Affairs

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Solicitation # SPE7L3-26-U-0634

This contract, issued by the Defense Logistics Agency under solicitation number SPE7L3-26-U-0634, is a small business set-aside for the procurement of a gasket with National Stock Number 5330007954086, intended for delivery under an indefinite-delivery contract structure with a guaranteed minimum of 27 units and a ceiling value of $350,000. The item is required in a quantity of 181 units, with delivery due 116 days after award, delivered FOB origin, and subject to zero variance in quantity. The gasket must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and the use of asbestos as defined in FED-STD-313 is strictly prohibited. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque bagging specifically designed to protect against ultraviolet degradation for items under Federal Supply Classes 5330 and 5331. Marking and labeling must follow MIL-STD-129, including proper 2D barcode application for automated processing, with no special marking required beyond standard identification. Preservation is controlled through dry, temperature-regulated storage with no additional preservation or cushioning materials applied. Palletization must conform to DLA’s RP001 packaging requirements, and all hazardous materials must be identified and labeled in compliance with 29 CFR 1910.1200 and MIL-STD-129, with applicable hazard warning data submitted for approval if not governed by other federal statutes. Inspection and acceptance occur at the destination, with the government retaining authority to reject noncompliant items. Contract administration is governed by FAR and DFARS clauses mandating compliance with small business representations, employment eligibility verification, trafficking in persons prevention, sustainable product requirements, cyber security standards including NIST SP 800-171 and safeguarding covered defense information, and electronic invoicing through WAWF. Payment and accounting information will be finalized upon award, and all proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2026 deadline.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L3-26-Q-1249

The contract is for a Seal Kit identified by NSN 5330-01-178-6210 and part number SPE7L3-26-Q-1249, with a fixed quantity of 124 kits delivered under a firm fixed price arrangement and no variance allowed in quantity. Delivery is required within 90 days after award, with inspection and acceptance occurring at the destination point under FOB origin terms. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and MIL-STD-129 for marking, with no special marking required; preservation and packaging methods must align with DLA’s procurement requirements. The item is designated a critical application and is subject to strict quality standards referenced in the DLA Master List of Technical and Quality Requirements, including sampling protocols per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Mercury and mercury-containing compounds are prohibited except in specific exempted applications such as certain batteries, instruments, or weapon systems, and portable devices containing mercury must have shockproof housing and a secondary containment barrier in accordance with NAVSEA 5100-003D. Asbestos is strictly forbidden. The item does not require Unique Identification under DFARS 252.211-7003. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow specified DLA procedural notes. The contract was solicited July 31, 2026, with responses due by August 7, 2026, under NAICS code 339991, issued by the Department of Defense for Land Supplier Operations Vehicle Support.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L3-26-Q-1241

The contract pertains to the supply of 93 gaskets identified by NSN 5330-01-271-4308, with a delivery requirement of 150 days after order placement. All items must be free of asbestos, and any substitutions for listed code or part numbers containing asbestos require formal approval under Clause L30 and Provision 4 conditions. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements accessible via the provided web portal, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging requirements, and all non-accepted supplies must have government identification removed prior to delivery. The solicitation number is SPE7L3-26-Q-1241, issued on July 31, 2026, with responses due by August 7, 2026. Performance is designated for Tracy, CA, 95304-5000, under NAICS code 336411, and the contracting activity falls under the Department of Defense’s Land Supplier Operations Vehicle Support. Primary point of contact is Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.

Aircraft Manufacturing

POSTED

about 15 hours ago

DEADLINE

PACKING, PREFORMED

Solicitation # SPE7L3-26-T-108R

The contract is for the procurement of 243 units of PACKING, PREFORMED with NSN 5330-00-510-8549 under solicitation SPE7L3-26-T-108R, issued by the Department of Defense through Land Supplier Ops Vehicle Spt. The item is classified as a commercial item and must comply with DLA packaging requirements, including technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Delivery is required within 168 days after award, with performance occurring at Tinkering Air Force Base, Oklahoma. The solicitation was posted on July 9, 2026, with responses due by July 20, 2026. For simplified acquisitions, the applicable revision of the DLA Master List is determined by the solicitation issue date or award date. The point of contact for inquiries is Susan Diamond, reachable via email or phone, and all documentation must be submitted through the DIBBS platform.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

LEADSCREW, SCREW JAC

Solicitation # SPE7L3-26-T-123T

The contract is for the procurement of four units of a LEADSCREW, SCREW JACK with NSN 3010017323696, issued under solicitation SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB Origin terms and a strict delivery window of 208 days from award, culminating in a mandatory ship date of February 25, 2027. The item must comply with all applicable DLA technical and quality requirements referenced through R and I numbers in the DLA Master List, and is subject to a zero tolerance variance in quantity. No Item Unique Identification is required per DFARS 252.211-7003(c)(1)(i), though all packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and palletization per RP001. The use of Class I Ozone-Depleting Chemicals is strictly prohibited, and substitute chemicals require prior approval unless explicitly authorized by the specification. Inspection and acceptance occur at the destination, and all shipments must be addressed to the designated federal delivery point. Invoicing must be submitted electronically through WAWF, and cybersecurity compliance is mandated via clauses requiring safeguarding of covered defense information and reporting of cyber incidents. The contractor must adhere to environmental, hazardous material, and trafficking-in-persons regulations, and must affirm representation of small business status with appropriate socioeconomic certifications at bid submission. All documentation must align with DoD standards, including hazard communication requirements under 29 CFR 1910.1200 and compliance with DFARS clauses governing data rights, subcontracting, and electronic payment procedures.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 15 hours ago

DEADLINE

LINING MATERIAL, FRI

Solicitation # SPE7L3-26-T-082V

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 15 hours ago

DEADLINE

PARTS KIT, SEAL REPL

Solicitation # SPE7L3-26-Q-1237

This contract specifies the procurement of a Parts Kit, Seal Replacement with the National Stock Number 5330-01-719-1047 and a quantity of 2 kit units, to be delivered within 230 days after the award date. The item is classified as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All packaging and preservation must adhere to MIL-STD-2073-1E, Appendix D for kits, and the end item must be sealed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the NSN to ultraviolet exposure. Packaging, marking, and shipping must follow MIL-STD-129 and DLA Packaging Requirements, including palletization standards, and include special markings as designated. The item is subject to delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, under direct vendor delivery, foreign military sales, or stock shipment conditions. The contract prohibits the use or incorporation of Class I ozone-depleting chemicals and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Mercury or mercury-containing compounds are strictly banned from direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The supplier, Defense Maritime Solutions, Inc., with part number H73918-01/OK, must ensure all items are marked per MIL-STD-130N and that preserved materials meet the specified preservation methods. No quantity variance is permitted—delivery must be exactly two kit units. Contract data indicates it was issued under solicitation SPE7L3-26-Q-1237, with a response deadline in August 2026 and a material need date of February 5, 2027. All handling and transportation must comply with DLA procedural notes C19 and C20, and the point of contact for inquiries is Michael O'Connor at the Department of Defense.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L3-26-Q-1243

The contract is for the procurement of 6 units of a rubber strip under solicitation number SPE7L3-26-Q-1243, with a delivery requirement of 150 days after award. The item is classified under Federal Supply Class 5330/5331 and carries the National Stock Number 5330-20-001-9814. All supplies must comply with the DLA Master List of Technical and Quality Requirements, where referenced technical and quality standards are identified by R or I numbers and are incorporated by reference. Packaging must meet MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment boundary as defined by NAVSEA 5100-003D. Additionally, all items must be free of asbestos, with any prior asbestos-containing parts or alternatives subject to approval under Clause L30 and Provision 4 conditions. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with the point of contact being Susan Diamond at the Department of Defense’s Land Supplier Operations Vehicle Support office.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

SEAL RING, METAL

Solicitation # SPE7L3-26-Q-1245

The contract is for 127 metal seal rings with NSN 5330-01-015-2382 under solicitation SPE7L3-26-Q-1245, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. All items must be free of asbestos, and any alternative materials or substitutions require explicit approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have all government identification removed as per RQ011. The item must be marked in accordance with MIL-STD-130N dated 16 November 2012. Delivery is required within 90 days after delivery order, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

PACKING WITH RETAINER

Solicitation # SPE7L3-26-Q-1244

The contract requires the supply of 1,284 units of a packing with retainer item under solicitation SPE7L3-26-Q-1244, with a delivery deadline of 150 days after order placement. All items must comply with stringent packaging standards, including enclosure in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation of Federal Supply Classifications 5330/5331 NSNs and LSNs. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, and any previously approved asbestos-containing components are no longer acceptable without formal approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a second layer of containment as specified in NAVSEA 5100-003D. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification. The contract incorporates cybersecurity requirements under CMMC Level 2 Self-Assessment and references technical and quality standards from the DLA Master List, with the applicable revision based on the solicitation issue date or award date. Performance is required at Robins AFB, Georgia, and inquiries should be directed to the primary point of contact, Susan Diamond, at DLA.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-124D

This contract, issued under solicitation SPE7L3-26-T-124D by the Department of Defense through the Land Supplier Operations Vehicle Support office, requires the delivery of six units of a CAM CONTROL item identified by NSN 3040014172330, with delivery due 157 days after award. The item is designated as a critical application and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with mercury and mercury-containing compounds prohibited unless explicitly exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable devices containing mercury must be shockproof and feature a secondary containment as per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with preservation method 31, no preservation material, and unit container D3, while marking adheres to MIL-STD-129 with no special marking required, and palletization follows RP001 DLA Packaging Requirements for Procurement. Delivery is FOB origin to the designated receiving warehouse in Tracy, California, with no tolerance for quantity variance. Inspection and acceptance occur at the destination by the government, with payment processed exclusively through Wide Area WorkFlow using electronic submissions. The contract includes mandatory clauses addressing cybersecurity compliance per NIST SP 800-171 and safeguarding of covered defense information, prohibition of hazardous materials like hexavalent chromium and toxic substances, trafficking in persons, employment verification, sustainable product considerations, and restrictions on acquiring equipment from communist Chinese military companies. Ocean transportation must use U.S.-flag vessels unless waived, and contractors must comply with all applicable labeling, safety data sheet, and hazardous material handling requirements under OSHA regulations. The solicitation allows for small business and socioeconomic set-asides but does not specify whether the award will follow an LPTA or trade-off approach, nor does it provide unit pricing or total contract value. Compliance with all FAR and DFARS clauses—including electronic payment instructions, whistleblower protections, contractor reporting obligations, and cybersecurity incident notification—forms a central condition of performance.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

CAP, FILLER OPENING

Solicitation # SPE7L3-26-T-124C

The contract solicitation SPE7L3-26-T-124C seeks the procurement of 63 units of a CAP, FILLER OPENING component, a metal casting requiring specialized tooling for manufacture. The item is governed by stringent defense and federal regulations, including compliance with the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951 where applicable. Packaging and marking must adhere to MIL-STD-129 for bar-coding and labeling, with hazardous materials subject to 29 CFR 1910.1200 and DFARS 252.223-7001, requiring Safety Data Sheets and proper hazard warnings. Technical data associated with this item is subject to export control under ITAR or EAR, restricting its disclosure to foreign nationals without prior authorization from the Department of State or Department of Commerce; access is limited to contractors with approved US/Canada Joint Certification Program status, completed training, and DLA authorization. The component includes parts governed by Qualified Products Lists or Qualified Manufacturers Lists, mandating procurement from pre-qualified sources as specified in procurement note H02. Delivery is required at the DDSP New Cumberland Facility in Pennsylvania under FOB Origin terms, with performance due 157 days after award and a need ship date of January 5, 2027. Inspection and acceptance occur at origin, with the contractor responsible for ensuring conformance to ISO 9001:2015 and executing 100% inspection of critical and major characteristics using ANSI/ASQC Z1.4 sampling at AQL 1.5. The contractor must submit a Certificate of Quality Compliance via DD Form 1423 and comply with all DLA packaging and identification requirements, including removal of government markings from non-accepted items. Payment processing is mandated through WAWF, with no alternative invoicing methods permitted. The solicitation incorporates multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity safeguards including NIST SP 800-171, subcontracting for commercial services, and accelerated payments to small business subcontractors. Offerors must hold a current UEI and CAGE code and declare their small business status, with affirmative responses triggering disclosures under DFARS 252.204-7016 regarding covered telecommunications equipment. The contract type remains unspecified, and pricing is undefined in the

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 15 hours ago

DEADLINE