Top

Military-Compliant Packaging and Preservation Services

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

339920 - Sporting and Athletic Goods ManufacturingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provide MIL-STD-2073-1E compliant packaging and Preservation Method 10 (PRES MTHD:10) for hub cap inserts using mercury-free materials.

Similar Contracts

Same NAICS industry code

NAICS: 339920

New

Federal

Target Repair, Refurbishment and Upgrade ServicesThe Naval Special Warfare Command is seeking commercial services for the refurbishment, repair, and upgrade of range targets under a five-year Indefinite Delivery Indefinite Quantity contract with Firm Fixed Price task orders. This acquisition is structured as a 100% small business set-aside under FAR Part 12, with the North American Industry Classification System code 339920 and a small business size standard of 750 employees. The estimated contract value ranges from a minimum of $1,000 to a maximum of $4,000,000, and the effort is being managed by the Department of Defense through the NSWC office located in San Diego, California. All proposals must be submitted by the response deadline of August 20, 2026, and inquiries should be directed to the designated point of contact emails provided. The solicitation number is H9224026QE065, and the announcement was posted on July 20, 2026, though this document serves only as a presolicitation and does not constitute a request for quotation or any binding obligation from the government.

Naval Special Warfare Command

POSTED

DEADLINE

Lake Red Rock Playground Equipment with Installation

W07V Endist Rock Island

POSTED

DEADLINE

POSTED

DEADLINE

Outdoor Fitness Equipment SupplyThe City of Dallas is seeking a subcontractor to supply durable, weather-resistant, and vandal-proof outdoor fitness equipment for public parks, specifically including elliptical trainers, leg presses, and upper body ergometers. The equipment must be designed to withstand prolonged outdoor exposure and heavy public use while resisting damage from vandalism, ensuring long-term functionality and safety. The solicitation is open for responses until July 27, 2026, and falls under NAICS code 339920, indicating a focus on other miscellaneous manufacturing, typically associated with recreational and sports equipment production. The contract does not specify a set-aside type and is categorized as a subcontract, meaning the awardee will be entering into a downstream agreement rather than a direct contract with the city. All equipment must meet structural and durability standards suitable for municipal park environments, with performance and maintenance requirements implicitly expected to align with public infrastructure norms. The opportunity is posted through the City of Dallas’s vendor platform, and interested parties must submit proposals through the provided online portal before the deadline.

POSTED

DEADLINE

Adaptive Recreation Equipment Maintenance & SupplyThe contract involves the supply, maintenance, and repair of adaptive sports equipment used in recreational programs for individuals with disabilities, including specialized items such as beep baseball gear and tactile swimming aids. Responsibilities include ensuring equipment functionality through regular safety inspections, managing inventory tracking systems, and providing timely repairs or replacements to support ongoing program operations. The work must be performed in accordance with established safety and accessibility standards to guarantee reliable and safe use by participants. This is a subcontract opportunity posted by the Vermont office of the Department of Economic Development under NAICS code 339920, which pertains to other miscellaneous manufacturing. The solicitation was released on July 20, 2026, with bids due by July 29, 2026, at 9:30 AM. While no specific location for performance is listed, the scope suggests delivery and service across Vermont’s adaptive recreation programs. All interested parties must submit responses through the provided state bidding portal before the deadline.

Department of Economic Development

POSTED

DEADLINE

Fibrous Cord Supply (NSN 4020002460688)

Defense Logistics Agency

POSTED

DEADLINE

Custom Signage and Identification Plates SupplyThe contract involves the design, fabrication, labeling, and packaging of custom signs, advertising displays, and identification plates in strict compliance with military logistics standards and the specified NSN Part 9905N00000653. All deliverables must adhere to rigorous defense specifications to ensure compatibility with military supply chains and operational requirements. The work is classified as a subcontract under NAICS code 339920 and is managed by the Defense Logistics Agency under the Department of Defense, indicating the critical nature of the supplies for military readiness and logistics operations. Performance of the contract requires precise adherence to military-grade quality controls, labeling protocols, and packaging standards to support seamless integration into existing defense infrastructure. While the place of performance and office address are unspecified, the contract is accessible via the DIBBS system and was posted on July 20, 2026, suggesting a proactive procurement timeline for future fulfillment. The absence of set-aside details implies eligibility for open competition, and vendors must be prepared to meet exacting technical and compliance benchmarks without room for deviation.

Defense Logistics Agency

POSTED

DEADLINE

Non-NSN Material Supply – Diving or Tactical Gear ComponentThe contract involves the supply of a single unit of a non-NSN material item with part number 330-COYST-95W, a specialized component likely used in diving or tactical operations, manufactured by Atlantic Diving Supply. This is a subcontract under the Department of Defense, with the Defense Logistics Agency serving as the overseeing organization, and the NAICS code 339920 indicates classification under Other Miscellaneous Manufacturing. The solicitation was posted on July 20, 2026, and the award is documented under contract number SP47W124D0003 with delivery order SP47W126F0554. Although details such as the place of performance and point of contact are not specified, the transaction is tied to a U.S. federal procurement system, suggesting delivery and compliance with defense supply requirements. The absence of a set-aside designation implies the subcontract is open to all eligible vendors without restrictions based on business size or status.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Narcotic Control Cabinets (Double Locking)The contract is for the procurement and delivery of narcotic control cabinets featuring double locking mechanisms that meet both military and medical standards, ensuring secure storage of controlled substances in high-sensitivity environments. The items must comply with stringent regulatory requirements to safeguard against unauthorized access, tampering, or diversion, making them essential for secure pharmaceutical handling within military medical facilities. The cabinets are intended for use at a U.S. military installation located at APO with a ZIP code of 09227-0000, indicating deployment in overseas or expeditionary medical settings where strict control protocols are mandated. This is a subcontract issued under NAICS code 339920, specifically for other medical and dental equipment manufacturing, and is managed by the Department of Defense through the Medical Supply Chain FSH. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a standard seven-day window for bids. Interested parties must submit proposals by the deadline through the DIBBS portal, as no point of contact or set-aside specifications are provided, and the award will likely be based on compliance with technical requirements, security certifications, and delivery timelines rather than cost alone, given the critical nature of the equipment for patient safety and regulatory adherence.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Life Preserver Vest SupplyThe contract requires the manufacture or supply of ten life preserver vests that meet military specification standards for delivery to the USS PRINCETON CG 59. All items must be delivered FOB Destination with a firm deadline of March 17, 2027, and must include fully traceable shipping documentation to ensure accountability throughout the logistics chain. Proper contract markings are mandatory to comply with Department of Defense procurement requirements. The solicitation falls under the NAICS code 339920, classifying it as a subcontract within the other miscellaneous manufacturing sector, and is managed by the Defense Logistics Agency under the Department of Defense. Delivery and compliance are strictly governed to ensure operational readiness and safety standards are met without exception.

Defense Logistics Agency

POSTED

DEADLINE

ESD/EMI Protective Packaging and Preservation ServicesThe contract seeks the provision of compliant electrostatic discharge and electromagnetic interference protective packaging, preservation, sealing, and handling services specifically tailored for defense electronics in accordance with military specifications. The work involves ensuring all packaging and handling processes meet rigorous standards to safeguard sensitive electronic components from environmental and electrical hazards throughout the supply chain, from manufacturing to field deployment. This subcontract is part of the Department of Defense’s broader effort to maintain the integrity and functionality of critical defense electronics under demanding operational conditions. The contract is administered by the Defense Logistics Agency under NAICS code 339920, which classifies it within the manufacturing of other electrical equipment and components. Although the solicitation number and specific point of contact details are not provided, the contract is publicly accessible via the DIBBS portal under award number SPE7M526P3885. The place of performance and organizational details are not specified, indicating flexibility in vendor location but requiring full compliance with federal defense procurement standards. Execution must align with current military requirements for protection, durability, and traceability, with all materials and methods subject to rigorous quality verification.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Life Preserver Vests (NSN 4220014873239)The contract entails the procurement and delivery of ten military-specification life preserver vests meeting U.S. Department of Defense and Navy safety and performance standards for maritime operations. These vests are identified by the National Stock Number 4220014873239 and must comply with all applicable military specifications to ensure durability, buoyancy, and reliability under harsh operational conditions. The requirement is issued as a subcontract under the NAICS code 339920, which pertains to other miscellaneous fabricated metal product manufacturing, indicating the specialized nature of the product’s production. The award is managed by the Defense Logistics Agency under the Department of Defense, with performance and delivery expected to occur in alignment with military supply chain protocols. The contract was posted on July 20, 2026, and is accessible via the DIBBS portal under the referenced contract identifiers.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A

View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 326122

New

DIBBS

CLAMP, LOOPThis contract, identified by solicitation number SPE7LX-26-U-8911, is a Total Small Business Set-Aside for the procurement of CLAMP, LOOP with NSN 5340-01-611-4025 and part numbers 90531K and VT10592AA01-3HN from CUMMINS FILTRATION INC. and NORMA PENNSYLVANIA INC. DIV BREEZE respectively. The requirement, for 240 units at a unit price of $1 each, is designated as a DLA DIRECT, CONUS delivery with FOB ORIGIN terms and no quantity variance allowed. Delivery must be completed within 116 days, with inspection and acceptance occurring at the destination. Packaging must strictly comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. If the item is classified as hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is permitted, but all packaging and labeling must conform to MIL-STD-129. Palletization must adhere to RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. The contract is part of a broader framework incorporating technical and quality specifications referenced through R and I numbers found on the DLA website. The solicitation, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is closed to small businesses only and was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and quantities are fixed with no allowance for adjustment. The point of contact for inquiries is Theodore Misiolek, with details provided for email and phone. The contract references a comprehensive set of DLA packaging and quality standards that must be met without exception, and all packaging must be marked and labeled in compliance with MIL-STD-129. While the quantity listed is an estimate, the buyer is not obligated to purchase the full amount, but any awarded contract must strictly follow the defined technical, packaging, and delivery protocols outlined. The NSN and part number are critical identifiers for compliance and logistics tracking, and suppliers must ensure all documentation aligns with the DLA’s eProcurement and unit of issue guidelines.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

SEAL, PLAINThis contract pertains to the procurement of six plain seals identified by NSN 5330-01-503-4930 under solicitation SPE7LX-26-U-8895, with a delivery requirement of 301 days after award. The item is subject to extensive technical, quality, and export control requirements as defined by the DLA Master List of Technical and Quality Requirements, which incorporate MIL-STD-1916 or ASQ H1331 for sampling unless otherwise specified, with zero non-conformances required in the sample lot unless explicitly stated otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to prevent ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA; where permitted, portable devices must include a second barrier of containment per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals, deviation requests, and source approval documentation, while inspection and acceptance may occur at origin, and all government identification must be removed from non-accepted items. Technical data associated with this contract is subject to export controls under ITAR or EAR, and access is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and been approved by DLA. All contractual obligations are governed by tailored higher-level quality requirements and specific documentation standards for verification and compliance.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

LEVER, LOCK-RELEASEThe contract pertains to the procurement of a Lever, Lock-Release with NSN 5340-01-453-2554 and part number A6210372, under solicitation SPE7LX-26-U-8896, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 135 units is requested at a unit price of $135.00, for a total contract value of $18,225. Delivery is required within 65 days FOB origin, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous material packaged per ASTM D3951 unless a higher-priority DLA Master List technical or quality requirement applies. Hazardous materials must follow TQ requirement IP025 per Fed-Std-313. The packaging must also adhere to the DLA Packaging Requirements for Procurement (RP001) and palletization standards. Identification of the item must conform to MIL-STD-130N for military property marking, and the contractor must ensure all government identification is removed from non-accepted supplies. The solicitation is open via DIBBS, and the contract is subject to the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The primary point of contact is Theodore Misiolek, with response due by August 5, 2026.

Hardware Manufacturing

POSTED

DEADLINE

TREAD, METALLIC, NONSKIDThe contract is for the procurement of two units of metallic nonskid tread with the NSN 2540-01-593-9652 under solicitation SPE7LX-26-U-8910, designated as a Total Small Business Set-Aside. Delivery is required within 109 days after award, and responses must be submitted by August 5, 2026. The item is governed by DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including tailored higher-level quality standards, configuration change management, inspection and acceptance at origin, and strict controls on government identification removal from non-accepted supplies. Only qualified manufacturers listed on approved QPLs or QMLs may supply components, and the contract enforces compliance with MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels and AQLs according to criticality of attributes. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval unless explicitly permitted by specification. Technical data is subject to export controls under ITAR or EAR, restricted to contractors with approved JCP certification, completed DLA training, and authorized access. The contract mandates CMMC Level 2 certification for third-party assessors and requires phosphate coating suppliers to meet specific certification standards. The approved source of supply has been updated from Devcon Corp to ITW Polymers Adhesives North America for part numbers PK9500-3/2 and PK9500-3/2-7. The contracting office is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

BAG, CARTRIDGE CLIPThe contract is for the procurement of a neoprene-coated cloth cartridge clip, a critical gun part designated as a Category I munitions item under demilitarization requirements, with strict compliance mandated for technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 1005-01-182-4536 and part number 65751-03013-041, must conform to exact engineering drawings and revision standards, and the actual manufacturer must be formally identified and approved prior to award, with any subsequent changes requiring official contract modification. The product is subject to Product Verification Testing (PVT) before each shipment, requiring five samples from each subcontractor involved in production, one of which may be destroyed during testing, and all samples must be properly marked and traced to their source. Inspection and acceptance occur at the manufacturer’s facility under the Quality Assurance Representative, following zero-defect sampling criteria aligned with MIL-STD-1916 or comparable zero-based plans, with critical attributes held to the highest verification levels and specified AQLs. Packaging must adhere to MIL-STD-2073-1E and DLA requirements, including marking per MIL-STD-129, and no ozone-depleting chemicals are permitted under any circumstances. The contract is a total small business set-aside under NAICS code 314910, with a delivery window of 134 days, FOB origin, no quantity variance allowed, and a unit price of $5.00 for a total of five units.

Textile Bag and Canvas Mills

POSTED

DEADLINE

CLAMP, LOOP.This contract, identified as CLAMP, LOOP, is a solicitation under number SPE7LX-26-U-8888 issued by the Strategic Acquisition Program Directorate within the Department of Defense for the procurement of eight units of a specific clamp and loop component with NSN 5340-00-582-1474. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 5, 2026, and an anticipated delivery deadline of 48 days after award. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment updates. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications including batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, per NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and full compliance with these stipulations is mandatory for contract fulfillment.

Hardware Manufacturing

POSTED

DEADLINE

BRACKET, MOUNTINGThe contract is for the procurement of three mounting brackets with NSN/Part Number 5340-01-693-6794 under solicitation SPE7LX-26-U-8898, with a delivery requirement of 81 days after contract award. The acquisition is structured as a Total Small Business Set-Aside under NAICS code 332510, indicating exclusive eligibility for small businesses. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce, including foreign national employees of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire, may access the controlled data. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek serving as the primary point of contact.

Hardware Manufacturing

POSTED

DEADLINE

HOUSING ASSY, FEEDERThe item specified is a Housing Assembly, Feeder, manufactured via metal casting, requiring specialized tooling for production, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. The procurement is governed by a comprehensive set of technical, quality, and compliance requirements including CMMC Level 2 certification for third-party assessors, tailored higher-level quality standards for manufacturers and non-manufacturers, and strict configuration change management protocols requiring formal engineering change proposals or variance requests. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical identification of the bare item is mandated, and technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior Department of State or Commerce authorization, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to DLA contractors who hold JCP certification, have completed mandatory DOD export control training, and received formal approval from DLA. The solicitation, identified as SPE7LX-26-U-8906, is a total small business set-aside under NAICS code 332994, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Four units are required with a delivery deadline 186 days after award. The solicitation closed on August 5, 2026, with a posted date of July 21, 2026. Demilitarization requirements apply as this item falls under Category I Munitions List items per DoDM 4160.28-Vol. 3, and it is subject to DLA packaging standards and covered defense information protocols. All technical and quality specifications referenced must be drawn from the DLA Master List in effect on the solicitation issue date. The primary point of contact for inquiries is Theodore Misiolek of DLA, reachable via email or phone provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

POWER SUPPLYThis contract specifies the procurement of a power supply with NSN 6130-01-502-8006, quantity of six units, under solicitation SPE7LX-26-U-8892, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required FOB origin within 104 days with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to all DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging, MIL-STD-129 for marking and labeling, and PALLETIZATION standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated a critical application, and mercury or mercury-containing compounds are strictly prohibited except for specific exempted uses such as batteries, fluorescent lights, or instrumentation per NAVSEA guidance, with portable mercury-containing devices requiring shockproof design and secondary containment. All technical and quality requirements referenced by R or I numbers in the DLA Master List govern over general standards. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

CLEVIS, ROD ENDThe item specified is a CLEVIS, ROD END with NSN 5340-01-579-1843, for a quantity of 61 units, under purchase request 1000237681, with delivery required within 111 days after order. The procurement is conducted under solicitation SPE7LX-26-U-8901, issued on July 21, 2026, with responses due by August 5, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332722, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item includes export-controlled technical data subject to ITAR or EAR, restricting disclosure or export to authorized parties only. Access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized clearance via the DLA. DFARS 252.225-7048 governs the handling of this data, including restrictions on foreign nationals, even when employed by U.S. entities. Government identification must be removed from non-accepted supplies, and the primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

KNOBThis contract, identified as KNOB under solicitation number SPE7LX-26-U-8891, is a total small business set-aside for the procurement of 68 units of a knob with NSN 5355-01-382-5286, requiring delivery within 88 days after award. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. Zero-tolerance policies are enforced for hazardous materials: ozone-depleting chemicals are completely prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All items must be asbestos-free, and any substitutions require formal approval under clause L30 and provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates full and open competition under a small business set-aside, with Theodore Misiolek designated as the primary point of contact for inquiries.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 14 days

View Details