Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging and Unitization Services

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the preparation, packaging, and unitization of government-supplied materiel using protective materials and methods that fully comply with military standards to ensure safe handling, storage, and transportation. All activities must adhere to established military specifications to maintain the integrity and readiness of the supplies through every phase of logistics. The work involves precise handling procedures to safeguard materiel against environmental and physical damage during transit and long-term storage. This is a subcontract opportunity under the NAICS code 312230, issued by the Department of Defense’s Land Supply Chain organization. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026. The place of performance is not specified in detail, and there is no set-aside designation indicated. Interested parties must submit their proposals through the official DIBBS portal before the deadline to be considered for award.

General Info

Prepare and package government materiel per military standards for safe logistics and storage.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

312230 - Tobacco ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Prepare, package, and unitize government-supplied materiel using protective materials and methods compliant with military standards for safe handling, storage, and transportation.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, cleaning, drying, and sealing services for defense hardware in full compliance with MIL-STD-2073-1E and RP001 standards. All activities must ensure the long-term integrity and readiness of military equipment during storage and transit, with strict adherence to prescribed procedures for environmental protection, corrosion prevention, and contamination control. Comprehensive Final Acceptance Test documentation must be delivered to verify conformance to contractual requirements and military specifications. Work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a response deadline of August 10, 2026. This is a subcontract opportunity issued under the Department of Defense’s ASC Commodities Division, classified under NAICS code 312230. The requirement is part of a broader effort to maintain defense supply chain readiness through standardized, validated packaging and preservation practices, and all vendors must demonstrate proven ability to meet stringent military logistics and documentation protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Packaging, Labeling, and Marking ServicesThe contract requires full compliance with MIL-STD-129 standards for the packaging, labeling, and marking of military shipments destined for naval vessels. This includes implementing serialization, barcoding, and comprehensive traceability documentation to ensure accurate identification, tracking, and handling of all items throughout the supply chain. All packaging and labeling must meet precise military specifications for durability, legibility, and compatibility with DoD logistics systems, with particular attention to uniformity and regulatory fidelity across all shipments. The work is scoped as a subcontract under the Defense Logistics Agency, with performance centered at FPO, zip code 96643, indicating delivery to naval assets operating in remote or maritime locations. The solicitation, classified under NAICS code 312230, is open for responses until August 13, 2026, and is part of the Department of Defense's broader effort to maintain rigorous logistical accountability in fleet support operations. Successful offerors must demonstrate proven capability in meeting stringent military packaging and marking requirements, with an emphasis on end-to-end traceability and system interoperability.

Defense Logistics Agency

POSTED

DEADLINE

DoD Packaging and Marking ServicesThe contract requires the provision of packaging and marking services that fully comply with MIL-STD-2073-1E standards for military materiel, ensuring durability, protection, and environmental resistance throughout the supply chain. It mandates precise application of MIL-STD-129 labeling with 2D barcode technology to enable seamless, automated tracking by the Department of Defense, critical for logistics visibility and inventory management. All work must meet exacting military specifications to support operational readiness and accountability. This subcontract opportunity is issued by the Active Devices Division under the Department of Defense, with performance required in Tracy, California, at the specified ZIP code 95304-5000. The North American Industry Classification System code is 312230, indicating classification under manufacturing related to packaging. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is accessible through the DIBBS system. Failure to meet compliance with either packaging or marking standards will result in rejection, and adherence to both standards is non-negotiable for contract award.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, and labeling of electrical wire in strict compliance with MIL-STD-2073-1E, MIL-DTL-12000, and DLA RP001 standards, ensuring military-grade durability, environmental protection, and traceability throughout the supply chain. All work must meet exacting defense specifications for material handling, corrosion inhibition, labeling accuracy, and documentation to maintain readiness and interoperability across military operations. The project is classified as a subcontract under NAICS code 312230, indicating involvement in wire and cable manufacturing support services tailored to federal mandates. Performance is designated for Jacksonville, North Carolina, with a submission deadline of August 13, 2026, and the solicitation was posted on August 2, 2026. The contract is administered by the Maritime Supply Chain ESOC Buys division within the Department of Defense, underscoring its importance to naval and maritime logistics. While no set-aside status is specified, bidders must be prepared to demonstrate capability in military packaging systems, quality control procedures, and adherence to DLA directives to ensure seamless integration into the defense supply network. The contract’s success hinges on precise execution of technical requirements and compliance with all regulatory documentation protocols.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and palletization services for power distribution panels in full compliance with Department of Defense and military standards, ensuring readiness for secure and durable transport under demanding operational conditions. All work must adhere to DLA specifications to maintain the integrity of the equipment during storage and transit, with particular attention to environmental protection, corrosion prevention, and secure mechanical containment. The task is scoped exclusively for small businesses under a Total Small Business Set-Aside, as defined by the SBA and FAR 19.5, with the NAICS code 312230 indicating classification within the beverage and tobacco product manufacturing sector, though the actual work pertains to defense-related packaging and logistics. The offeror must perform all activities with the place of performance listed as FPO 96666, indicating delivery to a military postal location typically associated with overseas or naval operations. The solicitation is open for response until August 13, 2026, with the opportunity published on August 2, 2026, under the auspices of the Maritime Supply Chain ESOC Buys office within the Department of Defense. While no point of contact information is provided, interested parties are expected to engage through the official DIBBS portal using the specified RFQ link for details, submissions, and further procedural guidance. Compliance with all military packaging protocols and timely delivery within the given deadline are non-negotiable requirements for award consideration.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of finished bushings in strict accordance with MIL-STD-2073-1E standards, ensuring full compliance with Department of Defense requirements for long-term storage and transport. This includes the application of corrosion inhibition treatments, sealed wrapping using approved materials, and preparation of containers suitable for military shipment, with all procedures designed to protect the integrity of the components under varying environmental conditions. The work must be executed to meet the rigorous specifications of the defense supply chain, with no deviation from the mandated preservation and packaging protocols. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a NAICS code of 312230 indicating it relates to beverage and tobacco product manufacturing, though the actual work focuses on defense-related packaging services. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The place of performance and point of contact details are not specified, but all work must align with the DoD’s logistical and preservation standards as outlined in the referenced military standard. The full terms and requirements can be accessed via the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Defense-Grade Packaging and Preservation ServicesThis contract requires the provision of defense-grade packaging, preservation, and containerization services for valve components and other defense supplies in full compliance with MIL-STD-2073-1E standards, specifically using the clean and dry preservation method to ensure long-term integrity and readiness. The specified packaging configuration must utilize designated unit and intermediate containers labeled D3 and E5, along with Pack Code U, to meet standardized military logistics and handling requirements. All materials and procedures must maintain strict environmental controls to prevent contamination, moisture damage, or degradation during storage and transit. The work is to be performed at the New Cumberland facility with a ZIP code of 17070-5002, and responses are due by August 13, 2026, under a subcontract structure within the NAICS code 312230 for beverage and tobacco product manufacturing, which reflects the classification used for defense packaging subcontracting activities. The contracting authority is the Department of Defense through its DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Specialized Packaging and PreservationThe contract requires specialized military-grade packaging and preservation of switchplate covers in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring maximum protection against environmental degradation during storage and transit. All materials and methods must meet exacting defense specifications, including appropriate corrosion inhibitors, desiccants, barrier films, and sealing techniques to maintain operational readiness over extended periods. The work must be performed using certified processes validated for military use, with documentation to verify compliance at every stage of packaging. This is a subcontract opportunity under the Department of Defense, managed by the Maritime Supply Chain, with a performance location designated as FPO 96677. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The North American Industry Classification System code 312230 indicates the work falls within the beverage and tobacco product manufacturing sector, though the actual deliverable is a defense-related electronic component housing. Contractors must demonstrate capability to execute defense-grade packaging protocols without deviation and be prepared for rigorous inspection and audit readiness throughout the contract lifecycle.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Grade Packaging and PreservationThe contract requires the packaging and preservation of solenoids in strict accordance with MIL-STD-2073-1E, specifically employing cold/dry preservation Method 41 to ensure long-term protection against environmental degradation. All units must be enclosed in designated military-grade containers identified as D3 and D0, which are engineered to maintain integrity during storage and transit under challenging conditions. An Open Pack Indication (OPI M) must be implemented to provide clear visual evidence if the packaging has been opened or compromised at any point in the supply chain. The work is classified as a subcontract under NAICS code 312230 and is being managed by the Department of Defense through its Maritime Supply Chain organization. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 2, 2026, and bids must be submitted by August 13, 2026, with no set-aside provisions indicated.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Defense-Compliant Packaging and Preservation ServicesThe contract requires the provision of defense-compliant packaging and preservation services for cable assemblies, adhering strictly to MIL-STD-2073-1E standards. Packaging must utilize CLNG/DRY Method 10 for preservation, ensuring long-term protection against corrosion and environmental degradation, and must be enclosed in fiberboard boxes designated as E5. All units must be accurately marked and barcoded in accordance with MIL-STD-129 to ensure proper identification, tracking, and logistics handling throughout the supply chain. The work is intended for delivery to a designated performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This subcontract is issued under the NAICS code 312230, indicating classification within the beverage and tobacco product manufacturing sector, though the actual scope relates to military packaging services. It is managed by the ASC Commodities Division of the Department of Defense, and responses are due by August 10, 2026. The solicitation is publicly accessible through the DIBBS system, and successful offerors will be expected to meet all military specifications without deviation, ensuring readiness and interoperability within federal defense logistics networks.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the application of preservation, packaging, and marking standards in full compliance with MIL-STD-2073-1 and MIL-STD-129 to ensure parts kits remain ready for long-term storage and secure transport under military specifications. The work involves precise adherence to defense-grade protocols for protecting components from environmental degradation, ensuring correct labeling, and maintaining traceability throughout the supply chain. All activities must align with the rigorous requirements set forth by these military standards to guarantee interoperability, readiness, and operational effectiveness when deployed. This subcontract is issued under the NAICS code 312230 and is managed by the Maritime Supply Chain within the Department of Defense, with performance required at a designated location in San Diego, ZIP code 92136-3581. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. All participating parties must demonstrate capability to meet defense packaging and preservation benchmarks, with attention to documentation, quality control, and delivery timelines essential for mission success. The contract does not specify a set-aside type and is accessible via the DIBBS platform for bid submission.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging, Marking & Bar-Coding ServicesThe contract seeks qualified vendors to deliver comprehensive packaging, preservation, and labeling services in strict accordance with MIL-STD-2073-1E, MIL-DTL-12000, and MIL-STD-129 standards, ensuring full compliance with Department of Defense requirements for military materiel handling. Key deliverables include the generation of barcodes, precise labeling, and DLA-compliant palletization to facilitate efficient logistics and inventory management across the supply chain. All work must be performed to meet rigid military specifications for durability, traceability, and environmental protection of sensitive equipment and components. Performance is required at Tinker Air Force Base, Oklahoma, with a response deadline of August 13, 2026, and the opportunity is classified as a subcontract under NAICS code 312230 for beverage and tobacco product manufacturing, reflecting the specialized nature of the packaging services involved. The contract is issued by the Maritime Supply Chain office under the Department of Defense, indicating its critical role in supporting defense logistics operations. Interested parties must submit proposals through the DIBBS platform by the specified deadline to be considered for award.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Solicitation # SPE7L1-26-T-907C

The contract is for one roll of rubber strip, each roll measuring 50 feet, under the national stock number 5330-01-651-7290, with a purchase request number 7017709123. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag in compliance with MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The rubber strip must be free of asbestos, and any substituted material must be approved per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. The item falls under federal supply classifications 5330/5331 and must adhere to MIL-STD-130N for identification marking of U.S. military property. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7L1-26-T-907C, with a response deadline of August 14, 2026, and delivery is required within 20 days after award. The contract is issued by the Department of Defense’s Land Supply Chain under NAICS code 339991, with the place of performance listed as FPO, ZIP 96660, and primary point of contact is Kristina Derry at krisitna.derry@dla.mil.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

BOOT, DUST AND MOIST

Solicitation # SPE7L1-26-T-907V

The contract pertains to the procurement of one unit of BOOT, DUST AND MOIST with NSN 5340-01-725-1393 under solicitation SPE7L1-26-T-907V, requiring delivery within five days of award at origin FOB terms with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, material codes, and unit container markings per MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s official requirements, and palletization must follow RP001 guidelines. The product is subject to strict prohibitions against ozone-depleting chemicals, and any substitutions must be pre-approved unless expressly allowed by specifications. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Sierra Army Depot in Herlong, California. The contractor must meet all identification and marking requirements per MIL-STD-130N, and the contract incorporates technical and quality standards referenced in the DLA Master List. This is a federal procurement under NAICS 332510 with no set-aside classification, and all data including shipment tracking, point of contact, and contract deadlines are encoded within the DLA systems for compliance and audit purposes.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE7L1-26-T-906Y

The contract specifies the procurement of two self-locking hexagon nuts with an extended washer, identified by NSN 5310-01-598-8901 and part numbers 92461A200 and 3931486C1, classified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards. The shipment must be sent via traceable means, excluding parcel post, to Fort Bliss, Texas, with mandatory markings per the designated point of contact and shipment identifiers. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The contract is issued under solicitation SPE7L1-26-T-906Y with a response deadline of August 14, 2026, and the required delivery date is July 31, 2026. The unit price is $2.00 per piece, totaling $4.00, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-908A

The contract includes a requirement for 56 units of a Commercial Off the Shelf (COTS) item identified as E Z LOADER BOAT TRAILERS, INC. with part number 250-017565 and NSN 5340017008576, priced at $56.00 per unit, for a total value of $3,136. Delivery is due within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking follows MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and the item must be shipped via the designated freight forwarder, V. ALEXANDER CO INC, to the provided shipping address. The solicitation is issued under contract number SPE7L1-26-T-908A with a response deadline of August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510. Technical and quality standards referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

STARTER, ENGINE, ELEC

Solicitation # SPE7L1-26-T-907W

The contract pertains to the procurement of a starter, engine, electrical component with NSN 2920-01-470-9867, issued by the Defense Logistics Agency under solicitation SPE7L1-26-T-907W. Four separate line items each specify one unit at a unit price of $1.00, with delivery required within five days FOB origin, zero quantity variance allowed, and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including preservation method 41, wrapping with specified material protected from direct tape contact, containment in a vapor-proof barrier bag with heat-sealed closure, and cushioning using weather-resistant fiberboard die-cut inserts designed to immobilize the product, prevent container collapse, and evenly distribute weight to safeguard solder joints and structural elements. The outer container must be reinforced corrugated fiberboard certified by the manufacturer, labeled per MIL-STD-129 with special marking code ZZ indicating an up arrow and “Open This Side,” and palletized according to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in any phase of preservation or packaging. The product must arrive in serviceable condition and be shipped via traceable freight, with parcel post prohibited. Shipments are directed to two distinct DoD addresses: one at Lewis McChord, Washington for three line items and another at Fort Bliss, Texas for one. Required delivery dates range from March to July 2026, and the contracting office is the Land Supply Chain under the Department of Defense, with Kristina Derry as the primary point of contact.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

HOUSING, PANEL, VEHIC

Solicitation # SPE7L1-26-T-907J

This contract pertains to the procurement of a housing panel for vehicle applications under solicitation SPE7L1-26-T-907J, with the NSN 2510-01-687-5387 and a single unit of issue (AY). The item must be delivered within 20 days to a military vessel shipment address at FPO AP 96694-7100, with delivery terms as FOB origin and inspection and acceptance occurring at destination. No quantity variance is permitted. All packaging and labeling must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with the DLA Master List of Technical and Quality Requirements taking priority over any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The contract mandates shipment via the fastest traceable means, explicitly prohibiting parcel post, and directs vendors to use the VSM system for routing. The required delivery date is July 28, 2026, and specific tracking details including transport control number, RDD, project code, and signatory are provided for logistical execution. All specifications are bound to the DLA procurement policies, and the point of contact is Kristina Derry at the Department of Defense’s Land Supply Chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906P

This contract, identified by solicitation number SPE7L1-26-T-906P, is issued by the Department of Defense through the Land Supply Chain under the DLA for the procurement of a single unit of a BLOCK, PIVOT component with NSN 2825-00-385-9399, tied to Siemens Energy part numbers including B30742, E16592PC29, E16593PC30, G8788PC46, G9098-1PC45, G9098PC45, G9181PC46, and M271R. The item must be delivered within five days of contract award, FOB origin, with zero variance in quantity, and is subject to strict packaging standards per ASTM D3951, superseded where applicable by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to RP001 requirements. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination is SWEIHAN AIR BASE in AE, with the shipment tagged for RDD 999/NMCS and governed by DLA procurement notes C19 and C20 regarding transportation and first destination transfers. The required delivery date is July 31, 2026, and inspection and acceptance will occur at the destination. Technical compliance is mandatory, and all government-specific identifiers must be removed from non-accepted supplies. The contract is managed under a federal acquisition framework, with Kristina Derry as the primary point of contact.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 12 hours ago

DEADLINE

COVER, HANDLE, DOOR, V

Solicitation # SPE7L1-26-T-907Y

This contract pertains to the procurement of a cover, handle, and door component for vehicular applications, identified by NSN 2540-01-428-6195 and purchase request 7012536527, with a quantity of 1,755 units to be delivered within 90 days from the contract award. The item is designated as a critical application component and must be manufactured using a metal casting process requiring specific tooling; sourcing and engineering support are available through DLA’s Aviation or Land & Maritime Supply Chains. The item must comply with stringent technical and quality requirements drawn from the DLA Master List, with verification levels and acceptable quality levels mandated for critical, major, and minor attributes. Zero non-conformances are required in sampling per MIL-STD-1916 or equivalent zero-based plans, and a Certificate of Conformance is mandatory. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-2073-1E, marking to MIL-STD-129 with no special codes, and palletization must follow DLA packaging standards. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the point of origin. The delivery destination is DLA Distribution Red River in Texarkana, TX, with a required ship date of January 8, 2026. The contract is governed by DLA-specific requirements including configuration change management, inspection protocols, and hazardous materials handling procedures, and was solicited under SPE7L1-26-T-907Y with responses due by August 14, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906R

The contract pertains to the supply of a gasket identified by NSN 5330-01-610-9969 and part number L100212, with a single unit requirement to be delivered within five days of order placement. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV deterioration, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. No asbestos is permitted, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or naval-referenced chemical reagents; when exempted, portable devices must include a secondary containment barrier and meet NAVSEA 5100-003D standards. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 indicating “Do Not Bend,” and palletization must adhere to DLA packaging requirements. The delivery point is FOB origin, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. The contract prohibits parcel post shipping; transportation must use the fastest traceable method, with delivery addressed to the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The purchase request number is 7017706951, with an original required delivery date of July 31, 2026, and the contract is issued under solicitation SPE7L1-26-T-906R, governed by DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906X

This contract involves the procurement of a gasket with NSN 5330-01-603-2748 and part number 119810-13110 from YANMAR AMERICA CORPORATION, requiring one unit to be delivered within five days of award under solicitation SPE7L1-26-T-906X. The item must comply with stringent packaging standards specified in MIL-DTL-117, TYPE II, CLASS C, STYLE 1, including medium-duty, waterproof, greaseproof, and opaque packaging, and is excluded from the First Destination Packaging Program and standard commercial packaging due to its sensitivity and specifications. No asbestos is permitted as defined by FED-STD-313, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped FOB origin to the designated delivery point at Camp Shelby, Hattiesburg, MS, using traceable freight methods and avoiding parcel post, with shipment designated as RDD/NSCS and tied to project TP 1. The contract defines a zero percent quantity variance and requires inspection and acceptance at destination, with the unit of issue as each. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced at the official DLA website. The contract's performance and compliance are overseen under DLA Land Supply Chain, with Kristina Derry as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-907X

The contract pertains to a single non-NSN item with CAGE code 62100 and part number 15047488, supplied by KOPPERS CO INC CONTAINER MACHINERY DIVISION located in Glen Arm, Maryland. The item is required in a quantity of one unit, with a total price based on a unit price for a single ea. Delivery is specified to be completed within five days of contract award, with FOB destination as the delivery term, meaning the supplier assumes all risk and cost until the item reaches the designated destination. Inspection and acceptance both occur at the destination, with no variance allowed in quantity—zero percent plus or minus. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and labeling must follow MIL-STD-129. Packaging must be palletized per RP001 DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack as defined in the contract. The delivery address is N62792 CVN/SSN MATERIAL SUPPORT at 500 West Park Lane, Hampton, VA 23666-5027, and shipment must be sent by the fastest traceable method; parcel post is strictly prohibited. The required delivery date is August 3, 2026, with no need ship date specified, and the solicitation number is SPE7L1-26-T-907X. The contracting office is under the Department of Defense, Land Supply Chain, and the primary point of contact is Darrell Pannell. For government use, the item is identified with DIC A3B, funding code XP, and project code ON9 TP 1.

All Other Miscellaneous Manufacturing

POSTED

about 12 hours ago

DEADLINE

SHAFT, STRAIGHT

Solicitation # SPE7L1-26-T-906Q

The contract is for the procurement of one straight shaft with NSN 3040-01-491-3925 under solicitation number SPE7L1-26-T-906Q, with a required delivery within five days of award. The item is part of a full and open competition managed by the Department of Defense through the Land Supply Chain, and the offeror must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Covered Defense Information applies, and the supplier is prohibited from using any Class I ozone-depleting chemicals in the manufacturing or incorporation of the part; any substitute chemicals require prior approval unless explicitly authorized by specifications. Complete technical data packages, including data for both approved and alternate parts, must be provided if Table A0648 is referenced. The place of performance is Portsmouth, with a zip code of 03801-5000. Responses are due by August 14, 2026, and the solicitation was posted on August 3, 2026. The primary point of contact for inquiries is Kristina Derry, reachable via email and phone provided.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE