Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging, Preservation, and Marking

Active

Federal

Response Deadline08/29/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive packaging and preservation services for military-grade equipment in full compliance with MIL-STD-2073-1 and ASTM D3951-18 standards, covering all aspects of transit protection including preservation techniques, packaging methods, packing procedures, proper marking, and shelf-life labeling. This work ensures that repaired GFP items are safeguarded against environmental and mechanical damage during storage and transportation, maintaining readiness and conformity to federal defense requirements. Failure to meet these standards could result in non-compliance and rejection of delivered materials. The contract is classified as a subcontract under NAICS code 561910 and is solicited by the Naval Supply Systems Command Weapon Systems Support, a division of the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 29, 2026, allowing potential vendors sufficient time to prepare proposals. The place of performance and specific office address details are not provided, indicating that execution may occur at multiple locations coordinated by the contractor. All work must be performed in alignment with DoD protocols without deviation from the referenced military and industry standards.

General Info

Packaging and preservation of military equipment per MIL-STD-2073-1 and ASTM D3951-18 for DoD compliance.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 29

Submission deadline

Response Deadline

08/29/2026, 12:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Package repaired GFP per military standards MIL-STD-2073-1 and ASTM D3951-18 to prevent transit damage, including preservation, packaging, packing, marking, and shelf-life labeling.

Similar Contracts

Same NAICS industry code

Product Labeling and Traceability ServicesThe contract requires the proper application of labels on all food items, clearly displaying the pack date and origin to ensure compliance with traceability standards. A decoding key must be made available upon request to facilitate interpretation of label information, supporting transparency and regulatory adherence. This service is classified as a subcontract under NAICS code 561910 and is issued by the state of Iowa, with a response deadline of August 13, 2026. The work is expected to be performed in Iowa, though the exact location is unspecified. Interested parties must submit their proposals by the stated deadline through the provided public bidding portal.

POSTED

DEADLINE

Palletized Packaging and Shrink-Wrapping ServicesThe contract involves the preparation of food shipments on pallets using industrial shrink-wrapping to ensure secure, safe handling and reliable delivery throughout the supply chain. The work requires precise packaging protocols that maintain product integrity, comply with food safety standards, and facilitate efficient logistics during transit. All services must be performed to meet strict handling requirements suitable for perishable and non-perishable food items, with attention to durability, contamination prevention, and dimensional stability of packed pallets. The solicitation is classified as a subcontract under NAICS code 561910, with a response deadline of August 13, 2026. It is issued by the Iowa agency and does not specify a set-aside classification or point of contact. The place of performance and office address details are unspecified, but the work is expected to support state-level food distribution operations. Interested parties must submit proposals through the provided online portal by the stated deadline to be considered for award.

POSTED

DEADLINE

Packaging, Labeling, and Marking ServicesThe contract requires the provision of comprehensive packaging, labeling, and marking services for switch guards in full compliance with MIL-STD-129 standards, ensuring all items are properly barcoded and labeled for delivery to the Defense Logistics Agency. This includes adherence to all federal requirements for hazardous material handling and documentation if the switch guards contain regulated substances, with strict attention to safety and regulatory protocols. The work must be executed to meet DLA’s logistical and inventory control needs, with accurate and scannable identification systems integrated into every package. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the solicitation is classified as a subcontract under NAICS code 561910. The contracting entity is the Electrical Devices Division within the Department of Defense, and all deliverables must align with military specification requirements to ensure seamless integration into the broader defense supply chain. Timely submission and full compliance with labeling and packaging standards are critical to contract fulfillment.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Military Packaging and Labeling ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services specifically for pump impellers, adhering strictly to Department of Defense and Defense Logistics Agency standards. All work must meet the stringent requirements for durability, environmental protection, and traceability essential for military logistics and deployment. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where the services must be executed to ensure compliance with DoD supply chain protocols. This is a subcontract under NAICS code 561910, which classifies it as other support activities for transportation, reflecting the specialized nature of the packaging and logistics services involved. The opportunity was posted on July 30, 2026, with a response deadline of August 10, 2026, leaving a narrow window for interested parties to submit proposals. The contract is managed by the Maritime Supply Chain under the Department of Defense and is accessible via the DIBBS platform, ensuring all submissions follow the official procurement process established for military contracting.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThe contract requires compliance with MIL-STD-2073-1E and MIL-STD-129 standards for the packaging, preservation, and labeling of spur gears, ensuring military-grade protection and traceability throughout the supply chain. This includes barrier wrapping to prevent corrosion and contamination, adequate cushioning to safeguard components during transit, and precise application of UCC/ITF-14 barcodes for automated identification and inventory management. All packaging methods must meet stringent Department of Defense requirements to maintain readiness and logistics integrity. The solicitation is categorized as a subcontract under NAICS code 561910 and is managed by the Land Supply Chain organization under the Department of Defense. Responses are due by August 10, 2026, with the opportunity posted on July 30, 2026. Performance location details are not specified, but the work must align fully with federal defense logistics standards, and all deliverables must be verifiable under the prescribed military specifications. The UI link provided directs to the official DIBBS platform for further submission details and documentation.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging and Preservation Services

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging & Marking ServicesThe contract requires comprehensive packaging, preservation, and marking services for 389 units to meet stringent military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and DLA RP001 for documentation and distribution protocols, ensuring readiness for long-term storage and secure military logistics. All work must be performed in strict compliance with these specifications to guarantee interoperability, traceability, and protection throughout the defense supply chain. The solicitation is issued under the NAICS code 561910 for Other Support Activities and is structured as a subcontract opportunity through the Department of Defense’s Fluid Handling Division. Performance is mandated at Tinker Air Force Base, Oklahoma, with a response deadline of August 10, 2026, and the opportunity was posted on July 30, 2026. Interested parties must submit proposals through the DIBBS system using the reference number SPE7M426T292W, with full adherence to all technical, procedural, and compliance requirements outlined in the referenced military standards.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires execution of humidity-controlled packaging per Method HM, application of shelf life coding using Type 2 Code 4, and full compliance with MIL-STD-129 marking standards for military shipments. All services must be performed to ensure the integrity, traceability, and regulatory accuracy of defense-related materials throughout the logistics chain. The work is tied to a subcontract under the Department of Defense, specifically managed by DLA Dist OKC KO CP, with performance occurring at Tinker Air Force Base, Oklahoma, 73145-9156. The solicitation was posted on July 30, 2026, and responses must be submitted by August 5, 2026, under NAICS code 561910 for other support services.

DLA DIST OKC KO CP

POSTED

DEADLINE

Military-Grade Packaging and PreservationThe contract requires the preservation and packaging of a manifold in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring long-term storage readiness through comprehensive moisture control, proper sealing, and accurate labeling. All work must adhere to military-grade specifications to protect the component from environmental degradation and maintain operational readiness during extended storage periods. The packaging process must include detailed documentation and traceability to meet Department of Defense requirements for inventory and logistics handling. This is a subcontract opportunity under the NAICS code 561910, issued by the Fluid Handling Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. No set-aside classification is specified, and the contract is open for competitive submission through the DIBBS platform. Participation requires proven experience in military packaging standards and the ability to deliver fully compliant, inspected, and documented packaging outputs.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Packaging and Palletization ServicesThe contract requires specialized packaging, labeling, and palletization services strictly compliant with MIL-STD-129 and ASTM D3951 standards for the secure and standardized handling of electronic components within military logistics. All packaging must ensure protection during transit, proper identification through marked labels, and adherence to the RP001 specification for pallet configuration to guarantee compatibility with Department of Defense supply chain operations. The work must be performed to meet rigorous military requirements for durability, traceability, and interoperability across defense distribution networks. The solicitation is issued as a subcontract under NAICS code 561910, managed by the Active Devices Division of the Department of Defense, with a performance location in New Cumberland, Pennsylvania, zip code 17070-5002. Interested parties must submit responses by August 10, 2026, following the posted deadline, with no set-aside provisions specified. The contract emphasizes precision in execution, as non-compliance could disrupt military readiness and logistics flow, making adherence to all technical specifications non-negotiable for award consideration.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Defense-Compliant Packaging & Marking ServicesThe contract requires specialized military-spec packaging and marking services for a valve, strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. All materials, labeling, and traceability markings must comply with these rigorous defense regulations to ensure proper identification, handling, and logistics compatibility within military supply chains. The work demands precise execution of packaging procedures, including the use of approved materials and permanent, standardized traceability identifiers to maintain accountability from production through deployment. This subcontract is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance expected at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The NAICS code 561910 indicates the scope falls under miscellaneous support services, emphasizing the specialized nature of defense-compliant packaging operations. The requirement does not include set-aside provisions, and all bidders must demonstrate full capability to meet the exacting military packaging and marking specifications outlined in the referenced standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Packaging, Labeling, and Compliance Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

Reusable Container Supply and ManagementThe contract involves the supply and comprehensive management of reusable containers specifically designed for the return of government-furnished property in maritime and aviation contexts. All containers must adhere strictly to MIL-STD-2073-1 for packaging and preservation standards, ensuring durability, environmental protection, and operational readiness during transit and storage. Each container must be clearly and permanently labeled with approved identification codes such as NSN, SMIC, or DLR to enable accurate tracking and accountability throughout the defense logistics chain. The effort requires end-to-end lifecycle management including deployment, collection, cleaning, inspection, repair, and redistribution of containers to support sustained operational needs. This is a subcontract opportunity issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with a NAICS code of 326199 indicating involvement in other plastic product manufacturing. The solicitation was posted on July 30, 2026, and responses are due by August 29, 2026. While specific performance locations and point of contact details are not provided, the scope implies national and potentially global logistics support tied to naval and aviation supply chains. Compliance with federal packaging standards and rigorous labeling protocols is non-negotiable, and successful contractors must demonstrate proven capability in managing high-volume, mission-critical container systems under demanding operational conditions.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Hazardous Materials Packaging and DocumentationThe contract requires the proper packaging of hazardous materials and the preparation of all necessary compliant documentation, including GHS labels, Safety Data Sheets, and SDDG submissions through WAWF, ensuring full adherence to 49 CFR, FED-STD-313, and military shipping regulations. All activities must meet stringent federal and defense standards to guarantee safe and legal transport of hazardous goods within the military supply chain. The opportunity is classified as a subcontract under NAICS code 493130, with a response deadline of August 29, 2026, and was posted on July 30, 2026. It is managed by the Navsup Weapon Systems Support office under the Department of Defense, with performance requirements tied to military logistics protocols. While specific location and point of contact details are not provided, the work is expected to support defense-related hazardous material handling operations across the DoD network.

Farm Product Warehousing and Storage

POSTED

DEADLINE

DLR Labeling and MIL-STD-129 ComplianceThe contract requires precise application of Depot Level Repairable labels and container markings in full compliance with MIL-STD-129 standards, ensuring all shipping and intermediate containers are properly identified for military logistics. Blue and yellow DLR labels must be placed in proximity to barcodes to maintain visibility and traceability throughout the supply chain, supporting accurate inventory management and repair cycle tracking. Failure to adhere to these specifications could disrupt operational readiness and result in non-compliance penalties. This subcontract, issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, targets contractors with expertise in defense labeling systems and is governed by NAICS code 323111 for printing and related support activities. The solicitation opens on July 30, 2026, with responses due by August 29, 2026. Performance location details are not specified, but work must meet all federal military standards for labeling and marking regardless of site. The contract emphasizes technical accuracy and regulatory adherence over location or size of the performing entity.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Electronics and Mechanical Repair Services for Government-Furnished Property (GFP)The contract calls for comprehensive technical repair, testing, and restoration of Government-Furnished Property to ensure full compliance with military performance standards. This includes detailed fault diagnosis, replacement of defective or worn components, and rigorous operational validation to confirm restored functionality. The scope encompasses both electronic and mechanical systems requiring specialized expertise to meet rigorous defense requirements, ensuring all repaired items are returned to mission-ready condition. The contract is classified as a subcontract under NAICS code 811212, with a response deadline of August 29, 2026, and was posted on July 30, 2026. It is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense. There is no specified set-aside designation or geographic restriction for performance, and no point of contact information is provided. The work must align with military specifications and be conducted to maintain equipment readiness across operational environments.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

RFQ N0038326QN121

Solicitation # N0038326QN121

The solicitation RFQ N0038326QN121, issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, seeks proposals for work classified under NAICS code 336413, which pertains to ship and boat building and repairing. The opportunity was posted on July 30, 2026, with a response deadline of August 29, 2026, and is targeted toward businesses capable of meeting specific technical and operational requirements outlined in the full solicitation document. Performance location details are not specified, but the contracting office is located in Philadelphia, Pennsylvania, with a zip code of 19111-5098. Primary point of contact is Ashley Vandiver, with Sam Hojnowski listed as secondary; both can be reached via the same email address. This solicitation does not indicate a specific set-aside designation, meaning it is open to all eligible contractors. Interested parties must access the full details through the provided SAM.gov link to prepare a compliant submission.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

58--RMM,AIRCRAFT,MATERI, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QHA62

The contract pertains to NSN 7R-5836-015830123-QF, a flight-critical aircraft component requiring repair or modification, with a quantity of 32 units to be delivered FOB origin. Sole-source acquisition is authorized under FAR 6.302-1 due to the necessity of maintaining part quality through exclusive technical data, engineering expertise, and manufacturing knowledge held only by previously approved sources. The Government has determined that alternative sources cannot be qualified in time to meet operational requirements without jeopardizing fleet readiness, and only previously approved sources have been solicited. Any new source seeking to respond must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, covering production experience for identical or similar items; failure to provide complete data will result in disqualification. The Government retains discretion to proceed with award based on Fleet support needs if source approval cannot be completed in time. All interested parties may submit proposals or capability statements within 45 days from the notice date, or 30 days if under an existing Basic Ordering Agreement, but this is not a competitive solicitation. Commercial item submissions are accepted within 15 days, though the acquisition is not conducted under FAR Part 12 policies. Technical documents such as drawings, specifications, and Qualified Product Lists are not stocked at DODSSP but are accessible via ASSIST-Online, with downloadable PDFs available through the Quicksearch portal or orderable via the DODSSP Shopping Wizard after account registration. Requests may also be submitted by phone or mail if internet access is unavailable. The contracting office is NAVSUP Weapon Systems Support in Philadelphia, with primary point of contact Alexis T. Hoepfl, and the response deadline is August 18, 2026. The item’s procurement is conditioned on Government source approval, and no award will be made without adherence to established approval protocols.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

30--TRANSMISSION,MECHAN, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPC10

The contract pertains to the procurement of 13 units of a mechanical transmission item designated by NSN 7R-3010-123915959-SX, with delivery terms set at FOB origin and acceptance of early and incremental deliveries permitted. The Government intends to award this contract under sole-source authority per FAR 6.302-1, though it invites all responsible sources to express interest or submit proposals within 45 days of the notice, or 30 days if an existing Basic Ordering Agreement applies. Proposal submissions will be considered only to evaluate potential competition, and the Government retains full discretion to proceed without competition based on its assessment of responses. Contractual documents are deemed issued upon electronic transmission, mail, or facsimile, with acceptance of the contractor’s proposal forming a binding agreement. All referenced military and federal specifications, standards, qualified product lists, and handbooks must be obtained through the DoD Single Stock Point at DAPS in Philadelphia or via the ASSIST-Online portal, with non-electronic requests handled through phone or postal service. The acquisition does not fall under FAR Part 12 commercial item policies, but interested parties may still propose commercial item alternatives within 15 days of notice. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support office in Philadelphia, with primary point of contact listed as Andrew N. Phillips, and the response deadline is September 14, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--NRP,USSR,AIRCRAFT,M, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RHA63

The contract pertains to the acquisition of 47 units of a flight-critical aircraft component identified by NSN 7R-1680-016281388-QE, requiring engineering source approval prior to award due to the unique design capability, proprietary manufacturing knowledge, and essential technical data held exclusively by approved sources. The Government is conducting a sole-source procurement under FAR 6.302-1 because the technical data necessary to replicate or qualitatively verify the part is not economically available to the Government or other potential suppliers, and the time required to qualify a new source would impede timely fulfillment of operational needs. Only previously approved sources have been solicited, and any new interested party must submit complete documentation per NAVSUP Weapon Systems Support source approval brochures, including detailed technical and manufacturing experience data, or provide proof of an ongoing source approval request. Failure to comply with these requirements will render submissions ineligible for award, and no competitive bidding is anticipated unless sufficient responses trigger a reconsideration of procurement strategy. Delivery is FOB origin, and the item is not being acquired under commercial item authorities per FAR Part 12 due to its specialized nature and lack of sufficient public technical documentation. All proposals must be received by August 18, 2026, and interested parties have until August 13, 2026, to indicate if they can supply the item as a commercial product. Technical data such as drawings, patterns, and deviation lists are not available through DODSSP or ASSIST-Online, and only standardized military and federal specifications can be accessed there. The contracting activity, NAVSUP Weapon Systems Support in Philadelphia, is the sole point of contact for inquiries and submissions, and any award may proceed based on fleet operational urgency even if source approval processes are not completed in time, provided support needs justify it. All submissions must strictly adhere to the NAVSUP WSS documentation requirements to be considered.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

25--SPINDLE,WHEEL,DRIVI, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPC02

The Government intends to procure three units of a 25-spindle wheel drive component for repair or modification purposes under a sole-source contract authorized under FAR 6.302-1, with no requirement for competitive bidding unless responsive proposals are received within 45 days of the notice or 30 days if awarded under an existing Basic Ordering Agreement. Delivery terms are FOB origin, and early or incremental deliveries are acceptable. Contractual documents are deemed issued upon electronic transmission, mail deposit, or facsimile, with Government acceptance of the contractor’s proposal establishing mutual agreement. All technical specifications, standards, qualified product lists, and military handbooks referenced in the procurement can be accessed via the ASSIST-Online portal at http://quicksearch.dla.mil/ or ordered through the DODSSP website after registering for a customer account; users without internet access may contact the DODSSP Help Desk or mail requests to the Philadelphia address. The Government is not applying FAR Part 12 commercial item acquisition policies but invites interested parties to submit commercial item alternatives within 15 days, noting that responses to this presolicitation notice are for market research purposes only and do not obligate the Government to proceed competitively. The solicitation number is N0038326QPC02, the point of contact is Andrew N. Phillips of the Naval Supply Systems Command in Philadelphia, and responses are due by September 14, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

CMMC Compliance and Cybersecurity AttestationThe contract requires the provision of CMMC compliance attestation through the Supplier Performance Risk System for activities involving the handling of covered defense information during repair and documentation processes. It is structured as a subcontract under NAICS code 541512, with the Department of Defense through Navsup Weapon Systems Support as the overseeing agency. The work must be performed at Greenlawn, and the contractor must demonstrate adherence to the Cybersecurity Maturity Model Certification standards to ensure the protection of sensitive data throughout the lifecycle of repair and recordkeeping operations. The solicitation is open for responses until August 27, 2026, with a posting date of July 28, 2026, allowing potential applicants a four-week window to prepare and submit their compliance documentation. There is no set-aside designation specified, meaning the contract is open to all eligible entities regardless of size or ownership classification. The focus is exclusively on cyber hygiene and regulatory validation, necessitating that the offeror possesses current, verifiable evidence of their CMMC level certification and the capacity to maintain continuous compliance while managing covered defense information in a secure environment.

Computer Systems Design Services

POSTED

DEADLINE

Bar-Coding and FMS LabelingThis contract requires the application of FMS-compliant bar codes and labels in accordance with MIL-STD-129-P standards, ensuring all packaged items are properly marked with critical identification data including the National Stock Number, Commercial and Government Entity code, part number, requisition number, and unit price, along with supplementary address information. The work must be performed to meet strict defense logistics requirements for international military sales, guaranteeing accurate tracking and accountability throughout the supply chain. The contract is classified as a subcontract under NAICS code 561499, with a response deadline of August 27, 2026, and is associated with the Department of Defense through the Navsup Weapon Systems Support office. Performance is to take place in Greenlawn, and the work supports the broader mission of ensuring standardized, secure, and traceable labeling for defense-related shipments under Foreign Military Sales programs.

All Other Business Support Services

POSTED

DEADLINE

Configuration and Quality Control DocumentationThe contract requires the provision of comprehensive configuration control documentation, test reports, and quality assurance records aligned with MIL-STD and ISO 9001 equivalent standards, including the mandatory submission of DD250 forms. The work must ensure full compliance with defense quality management practices, emphasizing traceability, accountability, and documentation integrity throughout the product lifecycle. The performance location is specified as Greenlawn, and the deliverables are critical to supporting the operational readiness and regulatory compliance of naval weapon systems. This is a subcontract under NAICS code 541330, issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense. The opportunity was posted on July 28, 2026, with a response deadline of August 27, 2026, at 8:00 PM. While no set-aside type or point of contact is listed, the requirement implies the need for a qualified provider with demonstrated expertise in defense-standard documentation and quality systems. All submissions must meet exacting federal compliance benchmarks to support procurement and verification processes for military hardware.

Engineering Services

POSTED

DEADLINE