This Solicitation opportunity from Department Of Defense was posted on June 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
Military Housing Office Inspection Kits
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The Department of Defense through its FA8903 contracting office at JBSA Lackland, Texas, is soliciting 194 standardized Military Housing Office Inspection Kits under solicitation MHO194, a Total Small Business Set-Aside (FAR 19.5) with NAICS code 334519. Each kit must contain seven certified, field-ready diagnostic tools: binoculars meeting Fujinon 10x50 or Steiner 10x50 Military Marine specifications including 10x magnification, 50mm objective lens, auto focus, fully coated optics, rubber armoring, waterproofing, 8G impact resistance, and included covers and neck straps; borescopes with at least a 1.0-megapixel camera, 210-degree articulating probe not exceeding 8.55mm diameter, 60-degree field of view, 4- to 8-foot probe length, 5-inch display with 854x480 resolution, and IP67 waterproof rating; thermal imagers from approved models such as FLIR MR277 or equivalent with specified resolution and sensitivity; combustible gas meters capable of detecting natural gas and propane with carbon monoxide resolution of 1ppm or lower and range up to 2000ppm, along with combustible gas detection ranging from 0–50,000ppm, accuracy within ±10%, and audible alarms with adjustable thresholds; GFCI testers certified to UL 1436 and CSA C22.2 No. 160 with the ability to detect multiple wiring faults including open ground, reverse polarity, and hot on neutral, plus a functional push-to-test button for GFCI receptacles; water pressure testers with a 3/4-inch FIP connection, ASME Type B accuracy, 0–140 psi operating range, and 200 psi maximum pressure rating; and infrared thermometers with an integrated Type T penetration probe capable of measuring 32°F to 149°F with ±0.9°F accuracy. All items are subject to strict compliance with technical performance standards and federal acquisition regulations. The solicitation requires offerors to be registered small businesses with valid UEI and CAGE codes and mandates compliance with Buy American Act provisions under FAR 52.225-1, Trade Agreements clauses under FAR 52.
General Info
Agency
NAICS
Place of Performance
San Antonio, TX, 78226, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
Amended paragraph #3 & #7 on 30 June 2026 (see attachments)
1. Binoculars; Quantity = 194
Make/Model: Fujinon 10x50, Steiner 10x50 Military Marine, or equivalent
Specifications for "Steinger Military Marine 10x50" (or equal) products:
- Magnification: 10x
- Objective Lens Diameter: No less than 50mm
- Field of View: No less than 327 ft at 1000 yds
- Focus: Auto Focus System
- Optics: Fully coated high contrast optics
- Close Focus: No more than 75 ft
- IP Distance: 56-74mm
- Diopter Range: +/- 5 pdt
- Luminosity: No less than 25
- Durability: Rubber Armoring (Rugged), Waterproof, Housing designed for minimum 8G impact
- Includes: Objective Covers, Carrying Case, High Contrast, Neck Strap
2. Borescopes; Quantity = 194
Make/Model: Teslong TD-500, Kentfaith Dual -Lens Articulating Borescope, or equivalent
Specifications for "Teslong TD-500" (or equal) products:
- Camera Pixels: 1.0 Megapixel minimum
- Probe: 2 Way Articulating Probe, 210 deg articulation, diameter no greater than 8.55 mm
- Field of View: 60 degrees minimum
- Display: 5 inch minimum, with a screen resolution of at least 854x480 pixels
- Probe Length: Between 4 to 8 feet
- Image Resolution: 1920x1080 pixel
- Durability: IP 67 waterproof
3. Combination IR and Probe Thermometers; Quantity = 194
Thermoworks IRT-2 with standard type T straight probe or equal.
Minimum IR Range -40 to 250 deg F
Minimum IR accuracy +/- 1.8 deg F from 32 deg to 149 deg F
Thermocoupler (probe) specifications
Minimum Range 32 deg F to 149 deg F minimum
Minimum Accuracy +/- 0.9 deg F from 32 deg F to 149 deg F
Must include a type T straight Penetration Probe, standard tip
4. Combustible Gas Meters / Combustible Gas Leak Detection; Quantity = 194
Make/Model: TPI 775, BPI Basics Kit, Gas Leak Detector CO Monitor, or equivalent
Specifications for "TPI 775 " (or equal) products:
Carbon Monoxide Detection:
- Resolution: 1ppm or lower
- Range: 0-2,000ppm or larger range
- Accuracy: +/- 5ppm or 5% of reading (whichever is greater) or better
Combustible Gas Leak Detection:
- Resolution: <50ppm
- Range: 0 – 50,000 ppm
- Accuracy: +/- 10%
- Detectable Gases: Must detect Natural Gas and Propane
- Alarms: Audible alarm for leaks, adjustable gas upper alarm threshold limit for alarm to permit gas leak isolation
5. GFCI Testers; Quantity = 194
Make/Model: Ideal 61-502 or equivalent
Specifications for "Ideal 61-502 120V AC Receptacle Tester" (or equal) product:
- Certification: UL 1436 and CSA C22.2 no 160 listed
- Detection Capabilities: Detects open ground, reverse polarity, open hot, open neutral, hot and ground reversed, and hot on neutral with hot open.
- Functionality: Push to Test function to test operation of GFCI receptacles.
6. Water Pressure Testers; Quantity = 194
Make/Model: Watts 3/4 Inch Plastic Water Pressure Test Guage, or equivalent
Specifications for "WATTS ¾ inch Plastic Water Pressure Test Gauge" (or equal)
- Connection: ¾ inch FIP connection
- Accuracy: ASME, type B
- Working Pressure: 0-140 psi
- Max Pressure: 200 psi
7. Thermal Imagers; Quantity = 194
Thermal imager minmum specifications:
- Thermal resolution: 160 x 120 pixels or greater
- Thermal sensitivity: < 150 mK or lower
- Field of View: 57 deg x 44 deg or higher
- Temperature range: 32 deg F to 170 deg F or greater
- Image modes: Thermal, Visual and mode that embosses visual details into thermal images
Digital camera minimum specifications
- 2 MP or greater
- 70deg x 55 deg minimum field of view
- 320 x 240 pixel minimal color display
Built in Moisture Detection both pinless and external pin probes (in lieu of this the vender can provide a separate moisture meter)
- Pinless depth to 0.75 inches
- Pin probes provided for pin operation
- Range 7% to 30% or greater with accuracy to +/- 1.5%
- Range 30% to 100% with reference only accuracy
Built in Air Temperature, Relative Humidity and Dew Point sensors (in lieu of this the vender can provide a separate meter to measure temperature, relative humidity and dew point)
- Temperature range: 32 deg F to 120 deg F or greater with minimum accuracy of +/- 1.1 deg F or better
- Relative Humidity range: 10%-90% or greater/ accuracy +/- 2.5% or better
- Dew Point -20 deg F to 120 Deg F or greater with accuracy of +/- 1.8 Deg F or better
More opportunities from Department Of Defense → FA8903 772 Ess Pk
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS