Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military Packaging and Marking Services

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of comprehensive packaging and marking services for fan shroud units in full compliance with MIL-STD-2073-1E for preservation and containerization and MIL-STD-129 for labeling, ensuring alignment with U.S. military logistics standards. All packaging must safeguard the units against environmental and physical degradation during storage and transit, with specific attention to materials, sealing methods, and internal cushioning that meet military-grade durability requirements. Marking must include standardized barcodes, identification data, handling symbols, and destination information as mandated by MIL-STD-129 to enable seamless integration into DoD supply chain systems. The work is classified as a subcontract under NAICS code 493190, issued by the Strategic Acquisition Program Directorate within the Department of Defense, with a response deadline of July 28, 2026. Performance is expected to support military logistics operations without a specified geographic limitation, emphasizing strict adherence to federal standards over location-based constraints. The solicitation is posted on the DIBBS platform, and vendors must demonstrate proven capability in military-grade packaging systems, experience with Defense Logistics Agency protocols, and the ability to deliver fully compliant, ready-for-issue units on schedule.

General Info

Provide military-compliant packaging and labeling for fan shroud units per MIL-STD-2073-1E and MIL-STD-129 by July 28, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-2073-1E compliant packaging and MIL-STD-129 compliant marking for fan shroud units, including preservation, containerization, and labeling for military logistics.

Similar Contracts

Same NAICS industry code

Packaging, Preservation, and PalletizationThe contract requires full compliance with military standards for packaging, preservation, and palletization to ensure goods are shipped in a moisture-free, durable condition suitable for defense logistics. Preservation must follow Method 10 CLNG/DRY, and all packaging, labeling, and palletization must meet DLA and MIL-STD specifications to guarantee operational readiness during transit and storage. The work is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The NAICS code 493190 identifies the work as other transportation support activities, specifically tied to military logistics and supply chain handling. The solicitation opens on July 23, 2026, with a hard deadline for submissions on July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All performance will align with federal requirements for secure, standardized military shipping protocols.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

Packaging, Marking, and Logistics SupportThe contract covers commercial packaging, palletization, and government-compliant labeling services for loop clamps, with strict adherence to military logistics standards including UID marking and MIL-STD-129 labeling requirements. All work must meet federal specifications to ensure seamless integration into defense supply chains and proper identification throughout the logistics lifecycle. The effort is structured as a subcontract under a Women-Owned Small Business Set-Aside, targeting eligible WOSB firms to support diversity in defense contracting. The NAICS code 493190 classifies this as other warehousing and storage, indicating the focus is on logistical handling rather than manufacturing. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and the performing organization is the Strategic Acquisition Program Directorate under the Department of Defense, though specific performance locations and contact details are not provided in the data.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging and marking of seal assemblies in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring full compliance with Department of Defense requirements for military logistics. Services include palletization, labeling, and adherence to DLA RP001 standards to guarantee uniformity, traceability, and readiness for military distribution systems. All work must meet the rigorous performance and documentation criteria defined by these standards to ensure seamless integration into existing defense supply chains. This is a small business set-aside subcontract under NAICS code 493190, awarded by the Maritime Supply Chain office within the Department of Defense. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is open exclusively to total small businesses as defined by the SBA. While no specific place of performance or point of contact is indicated, the contractual obligations are tied to supporting federal military logistics operations through precise, standardized packaging and marking processes.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Medical Records Storage/RetrievalThe District of Columbia’s Health Care Finance Agency is forecasting a future contract for medical records storage and retrieval services, with the opportunity posted on July 23, 2026. This is a forecasted opportunity indicating an upcoming procurement, meaning formal solicitation documents have not yet been issued, and no bidding timeline or contract value is currently available. The service will involve securely storing and efficiently retrieving medical records, likely to support healthcare operations across the District. The place of performance and specific location details have not been provided, and there is no designated set-aside classification or NAICS code listed at this stage. No point of contact information is included in the forecast, and interested vendors should monitor the official procurement portal for future updates regarding the formal solicitation.

Health Care Finance (DHCF)

POSTED

about 18 hours ago

DEADLINE

Medical Records Storage/RetrievalThe District of Columbia’s Health Care Finance Agency is forecasting a contract for medical records storage and retrieval services, with a posted date of July 23, 2026. This procurement is intended to secure a vendor capable of securely storing, managing, and retrieving medical records, likely to support healthcare operations within the district. The contract falls under a forecasted solicitation, meaning it is not yet active but signals an upcoming procurement opportunity for potential vendors to prepare proposals. The place of performance and exact location details are not specified, but services are expected to serve the agency’s needs across the District of Columbia. There is no set-aside designation, NAICS code, or organizational type listed at this stage, indicating the full scope and eligibility requirements have yet to be finalized. Interested parties should monitor the official portal for updates, as the contracting opportunity will likely be formally solicited in the future.

Health Care Finance (DHCF)

POSTED

about 18 hours ago

DEADLINE

Document Storage ServicesThe District of Columbia Department of Motor Vehicles is forecasting a future procurement for document storage services through Iron Mountain, with the opportunity posted on July 23, 2026. This action is intended to secure reliable, secure, and compliant storage solutions for physical records maintained by the agency, though specific details such as contract duration, volume of records, service levels, or pricing have not been disclosed. The solicitation is currently in a forecast phase, indicating it is not yet open for bids but serves as advance notice to potential vendors. The place of performance and agency office address details are unspecified, and no North American Industry Classification System code, set-aside type, or point of contact information is provided, suggesting further details will be released in a future formal solicitation. Interested vendors should monitor official procurement channels for updates, as the contract will likely require adherence to strict data security and retention standards given the nature of DMV records. The opportunity is not restricted to small or disadvantaged businesses at this stage based on the available information.

Motor Vehicles (DMV)

POSTED

about 18 hours ago

DEADLINE

Storage Contract (Ely.)The Contract for Storage (Ely.) is a forecasted opportunity issued by the Commission on Arts and Humanities (CAH) under the District of Columbia, with a posted date of July 23, 2026. Although no solicitation number, NAICS code, or set-aside details are provided, the contract is explicitly tied to the storage of public art and associated files, indicating it supports cultural preservation and administrative logistics for arts-related assets. The place of performance and office address details are unspecified, suggesting the location may be determined during the procurement process or is internal to the District’s facilities. There is no designated point of contact listed, and the only available link directs to the District’s public contracts portal for further information. This forecast signals an upcoming formal procurement cycle aimed at securing secure, compliant storage solutions for public art collections and related documentation.

Commission on Arts and Humanities (CAH)

POSTED

about 18 hours ago

DEADLINE

Small Molecule Compound Library Storage

Defense Health Agency

POSTED

about 22 hours ago

DEADLINE

Defense-Compliant Packaging & Labeling ServicesThe contract requires full compliance with MIL-STD-2073-1E for the packaging and preservation of a reservoir unit using Preservation Method 10, which includes thorough cleaning and drying procedures to ensure long-term integrity and environmental resistance. All packaging must adhere to strict military standards for durability, contamination control, and protective sealing during storage and transport. Additionally, labeling must follow MIL-STD-129 requirements, ensuring accurate and standardized identification markings for tracking, handling, and inventory management throughout the defense logistics chain. The work is positioned as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, and is classified under NAICS code 493190 for other support activities for transportation. Responses are due by July 30, 2026, with the solicitation posted on July 22, 2026, and all performance is expected to meet DoD quality and documentation benchmarks without deviation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Commercial Item Packaging and KittingThe contract involves the procurement, packaging, and kit assembly of commercial items in strict compliance with MIL-STD-2073-1E and ASTM D3951-10 standards, ensuring all items are properly protected for long-term storage and secure shipment. This includes the integration of moisture barriers, cushioning materials, and appropriate containerization methods to safeguard contents against environmental and physical damage during handling and transport. The work must meet rigorous military packaging directives to ensure readiness and functionality upon delivery. The contract is classified as a subcontract under NAICS code 493190 and is solicited by DLA DIST SAN JOAQUIN under the Department of Defense. Performance is required at Tracy, California, with a ZIP code of 95304-5000. The solicitation was posted on July 22, 2026, and proposals must be submitted by July 28, 2026. Interested parties can access additional details through the official DIBBS portal linked in the contract data.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires specialized packaging, preservation, and labeling services for cable assemblies to comply with military standards, ensuring durability and traceability in defense supply chains. Services must include hazard warning labels, barcoding for logistics tracking, and external container marking that meet exacting federal specifications, with all work performed at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code is 493190, indicating that this is a subcontract related to warehousing and storage services under the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 22, 2026, with a firm response deadline of July 30, 2026, and bidders must demonstrate capability to handle sensitive military-grade components through certified preservation techniques and compliant labeling systems. All packaging must protect assemblies from environmental and mechanical degradation during transit and storage, while barcodes and external markings must integrate seamlessly with existing DoD tracking infrastructure. The requirement is open to qualified subcontractors with proven experience in military supply chain logistics and adherence to defense industry standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Packaging and Palletization ServicesThe contract requires comprehensive military packaging and palletization services in full compliance with MIL-STD-2073-1E standards, encompassing dry cleaning of materials, air environment sealing to protect against moisture and contaminants, and secure packaging for long-term storage and transit. All work must meet the specific packaging and handling requirements defined by DLA RP001 for palletization, ensuring uniformity, stability, and ease of handling during transport. The service scope is designed to support the secure delivery of sensitive or mission-critical equipment to a naval vessel operating in a maritime environment, where exposure to salt air and extreme conditions demands rigorous protective measures. The services are to be performed under a subcontract agreement issued by the Defense Logistics Agency under the Department of Defense, with the place of performance designated as FPO 09514, indicating shipment to a vessel at sea. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified under NAICS code 493190 for other warehousing and storage. All subcontractors must demonstrate proven capability in military-grade packaging, adherence to federal standards, and experience handling defense logistics requirements, ensuring that every item is properly prepared, sealed, and palletized to maintain operational readiness upon arrival at the naval destination.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Quality Assurance and Compliance DocumentationThe contract seeks a small business to provide technical documentation, quality assurance testing, and compliance verification services to ensure splash guards meet all technical specifications set by the Defense Logistics Agency. This includes preparing Safety Data Sheets and validating labeling to confirm adherence to regulatory and operational standards. The work is critical to ensuring product conformity and safety for military use, requiring precise execution throughout the documentation and testing phases. The solicitation is a total small business set-aside under FAR 19.5, meaning only small businesses are eligible to respond, and it falls under NAICS code 541380 for other professional, scientific, and technical services. The opportunity was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. While no specific location is listed for performance or the point of contact, the work is expected to be performed in support of defense logistics operations under the authority of the DLA.

Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

Logistics and Transportation Services (CONUS)This contract seeks qualified small businesses to provide comprehensive logistics and transportation services for the movement of packaged splash guards across the Continental United States. The scope includes full shipment coordination, real-time delivery tracking, and the generation of WAWF-compliant documentation to ensure seamless integration with Department of Defense supply chain systems. All transport activities must adhere to strict federal contracting standards and operational protocols to guarantee timely, secure, and accurate delivery of materials. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designating this opportunity exclusively for small businesses certified under the SBA’s guidelines. The NAICS code 484121 applies, specifically categorizing the work under truck transportation of specialized freight. Proposals must be submitted by the stated deadline to be considered, and performance will be conducted entirely within the CONUS region, with no international components involved.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 17 hours ago

DEADLINE

Packaging and Palletization ServicesThe contract requires the provision of compliant packaging, labeling, and palletization services for splash guards in accordance with DLA standards RP001 and applicable hazardous material regulations such as FED-STD-313 or commercial standards like ASTM D3951. All work must ensure full regulatory compliance throughout the packaging process, from material handling to final unit preparation for shipment, with strict adherence to military and industry specifications for safety, durability, and identification. The services are tailored to support defense logistics requirements and must be delivered with precision to meet quality and traceability expectations. This is a total small business set-aside subcontract under NAICS code 423840, issued by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, and is accessible via the DIBBS platform. Performance location details are not specified, but the work is expected to align with federal defense supply chain protocols. The contract emphasizes small business participation and demands full compliance with all applicable standards without exception.

Industrial Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Manufacture and Supply of Vehicular Splash GuardsThe contract entails the full lifecycle production and delivery of vehicular splash guards identified by NSN 2540015030413, covering all stages from material acquisition and fabrication to final quality assurance, packaging, labeling, and shipment to destinations within the continental United States. Execution must adhere strictly to delivery orders issued under the terms of this agreement, ensuring timely and compliant fulfillment of military requirements. The work is classified under NAICS code 336340, which pertains to motor vehicle parts manufacturing, and is subject to a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. This subcontract opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. While no specific point of contact or performance location details are provided, the contractual obligations center on manufacturing excellence and supply chain reliability to support defense operations. All proposers must demonstrate capacity to meet stringent defense quality standards and operational timelines through a fully integrated production and logistics process. The solicitation is accessible via the DIBBS platform under reference number SPE7LX26U8634.

Motor Vehicle Brake System Manufacturing

POSTED

about 17 hours ago

DEADLINE

Ocean Transportation of SuppliesAll finished mounts must be transported via U.S.-flagged vessels for overseas delivery unless a formal waiver is granted, ensuring adherence to federal maritime regulations. Compliance with DFARS 252.247-7023 is mandatory, underscoring the requirement to use American-flagged shipping services to support national security and domestic maritime interests. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the SBA, and falls under NAICS code 483111 for ocean freight transportation. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, which retains authority over the procurement process and performance obligations.

Deep Sea Freight Transportation

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThis contract requires full compliance with OSHA and DFARS regulations concerning the handling and labeling of hazardous materials, particularly focusing on the proper identification and documentation of cleaning agents or substances that present potential risks. All materials must be accurately labeled according to OSHA standards, and Material Safety Data Sheets (MSDS) must be prepared and maintained for any substance deemed hazardous to ensure workplace safety and regulatory adherence. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the Small Business Administration. It falls under the NAICS code 541690, which pertains to other scientific and technical consulting services, suggesting the work involves advisory or operational support related to hazardous material management. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, and is administered by the Strategic Acquisition Program Directorate under the Department of Defense. Performance location details are unspecified, and the contract is accessible via the DIBBS platform for registered bidders.

Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

Marking, Labeling, and BarcodingThe contract requires the application of permanent and shipping labels in full compliance with MIL-STD-129 and MIL-STD-130N standards, encompassing Data Matrix barcodes, Unique Item Identification (UID) marking, and clear human-readable text to ensure traceability and regulatory adherence across military supply chains. All labeling must meet exacting military specifications for durability, legibility, and data accuracy, with particular attention to the proper implementation of UID requirements for asset tracking and inventory management. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 323111, open for bids with a response deadline of July 28, 2026. The solicitation is issued by the Strategic Acquisition Program Directorate within the Department of Defense, emphasizing the need for qualified contractors to support defense logistics systems. The place of performance and point of contact details are not specified, but the work is expected to align with DLA and DoD supply chain protocols, and interested parties must access the full solicitation via the provided DIBBS link for complete requirements and submission instructions.

Commercial Printing (except Screen and Books)

POSTED

about 17 hours ago

DEADLINE

Manufacture of Resilient Utility MountsThe contract is for the full production of 190 resilient utility mounts identified by NSN 5340-01-197-3461, encompassing all aspects of manufacturing from material sourcing and fabrication to assembly and rigorous quality assurance, all in full compliance with military specifications. The work must be executed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the North American Industry Classification System code 332510 designated for the activity, ensuring the contract is reserved exclusively for small business concerns. The solicitation, issued by the Strategic Acquisition Program Directorate under the Department of Defense, was posted on July 23, 2026, with a firm response deadline of July 28, 2026. The contract is structured as a subcontract and will be procured through the DIBBS platform, with no specific place of performance or point of contact details provided. The requirement demands end-to-end production capability with strict adherence to defense standards, and any bidder must be certified as a small business to qualify for award.

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Transportation and Delivery (FOB Origin, First Destination)The contract pertains to the transportation of finished shafts from the manufacturer’s location under FOB Origin terms to a designated first destination as part of the Department of Defense’s Final Destination Transportation program. The work involves managing the full logistics chain including coordination with the Defense Department’s Wide Area WorkFlow system for electronic documentation and real-time delivery tracking to ensure compliance and accountability. All shipments must be executed in accordance with military logistics standards, with responsibility resting on the contractor to handle freight movement from origin to the specified delivery point without delays or disruptions. This is a subcontract award under the NAICS code 484121, indicating the service is categorized as truck transportation of freight. The solicitation was posted on July 23, 2026, with responses required by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. While specific performance locations and contacts are not detailed, the delivery obligation is tied to the fulfillment of DoD’s strategic transport requirements, and the contractor must integrate seamlessly with existing DLA and DoD digital systems to provide end-to-end visibility of cargo movements from shipment inception through final delivery.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 17 hours ago

DEADLINE

Packaging, Labeling, and Marking ServicesThe contract involves the final military-compliant packaging, labeling, and marking of precision shafts in strict accordance with Department of Defense standards, including MIL-STD-129, ASTM D3951, and the RA001/RP001 specifications. All work must meet rigorous military requirements for identification, durability, and traceability to ensure seamless integration into defense supply chains. Compliance with these standards is mandatory and will be enforced through detailed inspections and verification processes to guarantee that each item is properly marked and packaged for operational readiness. This is a subcontract under the Strategic Acquisition Program Directorate of the Department of Defense, with a North American Industry Classification System code of 561910, indicating a focus on packaging and labeling services. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026. The place of performance is not specified, but the work must support federal defense logistics needs. Interested parties must submit proposals through the DIBBS system using the provided link before the deadline to be considered for award.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract titled Hazardous Materials Compliance & Labeling Services requires the identification, classification, and accurate labeling of hazardous materials used in manufacturing or packaging processes. It includes the preparation of Safety Data Sheets in full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard, while also addressing applicable exemptions under OSHA HCS. The work involves ensuring all hazardous substances are properly documented, marked, and communicated to personnel in alignment with federal safety regulations. This subcontract, issued under NAICS code 541620 by the Department of Defense’s Strategic Acquisition Program Directorate, is focused on supporting defense-related operations with robust hazardous materials management. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026. The place of performance and specific location details are not specified, and no set-aside provisions or point of contact information are provided. Contractors must deliver comprehensive compliance services that uphold the integrity of hazardous material handling within defense manufacturing and packaging environments.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE