Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military Shipment Marking and Labeling

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires compliance with MIL-STD-129 standards for all military shipment markings, including the application of standardized barcode labels, unit identification codes, and environmental compliance tags to ensure proper tracking and handling throughout the supply chain. All labeling must be accurately applied to meet Department of Defense specifications for legibility, durability, and placement under operational conditions. The work is designated as a subcontract under NAICS code 541921 and is tied to the ACTIVE DEVICES DIVISION, with performance location specified as Cherry Point, North Carolina, 28533-5040. Proposals must be submitted by August 14, 2026, and the solicitation was posted on August 3, 2026, indicating a strict timeline for response and execution.

General Info

Comply with MIL-STD-129 labeling for military shipments at Cherry Point, NC, by August 14, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

541921 - Photography Studios, PortraitView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply standardized markings per MIL-STD-129, including barcode labeling, unit identification, and environmental compliance tags.

Similar Contracts

Same NAICS industry code

MIL-STD-129 Labeling & Packaging ServicesThe contract requires the design and application of MIL-STD-129 compliant labels for military shipment and storage, specifically ensuring accurate representation of the Unit of Issue and Quantity per Unit Pack to meet Department of Defense standards. This work is critical for proper military logistics, inventory control, and supply chain efficiency, with labels needing to adhere strictly to federal specifications for barcoding, data format, and physical placement on packaging. The requirement is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, reserved exclusively for businesses certified under that category to promote veteran-owned enterprise participation in federal contracting. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and falls under NAICS code 541921 for other scientific and technical consulting services. Performance is designated to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the logistics and storage operations are centered within that military supply chain hub. The contracting activity is managed by the Maritime Supply Chain division of the Department of Defense, underscoring its focus on maritime and naval logistics needs. While no point of contact is listed, the official solicitation portal is accessible via the provided DIBBS link for further submission details and technical requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Technical Data and COTS Manuals ProductionThe contract requires the production of commercial-off-the-shelf (COTS) operation, maintenance, and repair manuals aligned with DI-TMSS-80257C and applicable military data standards, ensuring technical documentation meets Department of Defense requirements for usability, accuracy, and compliance. The work is scoped to deliver fully compliant manuals that support the lifecycle management of military equipment, with strict adherence to standardized formats and data structures mandated by military technical documentation protocols. This subcontract is issued by DLA Maritime - Puget Sound under the NAICS code 541921, with performance expected to occur in Silverdale, WA, 98315. The opportunity was posted on August 3, 2026, and responses are due by August 7, 2026, at 5:00 PM. While no set-aside designation or point of contact is specified, the nature of the work suggests a need for experienced technical documentation contractors capable of integrating military-specific requirements into COTS-generated documentation without deviation from approved standards.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Content Development and Historical Accuracy ReviewThe contract seeks the development of educational narratives, text panels, audio scripts, and accompanying visual assets designed to communicate historical and procedural information relevant to the Federal Circuit Court of Appeals. All content must be meticulously researched and crafted to ensure factual precision, historical accuracy, and compliance with legal standards. Work will be performed in close coordination with court staff to align materials with institutional goals and educational objectives, and all deliverables require rigorous fact-checking and legal accuracy reviews before final approval. The project emphasizes clarity, accessibility, and adherence to judicial integrity, ensuring the materials serve the public’s understanding of the court’s role and history. Performance is centered in Washington, D.C., with a deadline for proposal submission on August 24, 2026, following a posting date of July 31, 2026. The solicitation is classified as a subcontract under NAICS code 541921, indicating it involves other professional, scientific, and technical services, specifically related to management consulting and communication services. The contracting entity is the Judicial Branch through the Federal Circuit Court of Appeals, and while no set-aside type or point of contact is specified, the work demands collaboration with legal and administrative personnel to maintain authenticity and institutional alignment. All outputs must meet exacting standards for accuracy and professionalism reflective of the federal judiciary’s public service mission.

Federal Circuit Court Of Appeals

POSTED

DEADLINE

Call Tracking & Analytics Platform SupportThe contract requires the implementation and ongoing maintenance of call tracking systems and analytics platforms designed to monitor lead sources with a strict requirement of 99% uptime. The provider must ensure continuous functionality of the systems to accurately capture, track, and analyze inbound leads, delivering detailed reporting on lead quality and conversion metrics to support performance evaluation and optimization. The solution must be robust enough to handle high-volume data flows and provide actionable insights for marketing and sales teams across all integrated channels. This is a subcontract under a Small Business Set Aside designation, specifically targeted toward small businesses, with the North American Industry Classification System code 541921 indicating it falls under Other Scientific and Technical Consulting Services. The opportunity was posted by the Department of Defense through the W7M1 Uspfo Activity Dc Arng office, with a response deadline of August 12, 2026. Performance is expected to align with federal standards for reliability and data integrity, though specific geographic performance location details are not provided. The contract emphasizes operational continuity and analytical precision, making technical expertise in call tracking infrastructure and data analytics critical for successful bid submission.

W7M1 Uspfo Activity Dc Arng

POSTED

DEADLINE

RFP# R26-008 Graduation Photography Services

Solicitation # RFP-123892

Radford University in Radford, Virginia is soliciting proposals for graduation photography services under RFP# R26-008, with a response deadline of August 12, 2026. The solicitation is issued by the State, Local, and Education (SLED) sector and seeks qualified vendors to provide comprehensive photography coverage for graduation events, including ceremony documentation, individual and group portraits, and digital deliverables. All work must be performed on site at Radford University, and proposers are expected to meet strict timelines and quality standards to ensure seamless execution during commencement activities. Point of contact for inquiries is Kevin McDowell, reachable via email at dkmcdowel@radford.edu or by phone at 540-831-5356. Proposals must be submitted through the designated vendor portal linked in the posting, and interested vendors should review all requirements carefully prior to submission.

Radford University

POSTED

DEADLINE

On-Location Video Production & CinematographyThe contract titled On-Location Video Production & Cinematography seeks qualified vendors to capture high-quality video footage across various locations within the City of Ontario for use in promotional materials, economic development initiatives, and public service announcements. The work requires full-service cinematography including camera operation, professional lighting setups, high-fidelity audio recording, and comprehensive field logistics coordination to ensure seamless execution under diverse environmental conditions. All deliverables must meet professional broadcast standards and align with the city’s branding and messaging goals. Subcontractors are expected to provide their own equipment and personnel, manage all on-site operations, and adhere to scheduled timelines for production and delivery. The opportunity is posted under NAICS code 541921 and is designated as a subcontract, with responses due by August 17, 2026, at 4:00 PM. The contracting entity is the Economic Development Department of the City of Ontario, California, and while specific performance locations are not detailed, work will occur throughout the city’s jurisdiction. Interested parties must submit proposals through the designated portal prior to the deadline to be considered.

Economic Development Department of City of Ontario

POSTED

DEADLINE

Hazard Warning Label Design and SubmissionThe contract entails the design, production, and pre-award submission of hazard warning labels that must fully comply with DFARS 252.223-7001 and all applicable federal regulatory standards. The work focuses on ensuring safety markings meet rigorous defense and nuclear reactor program requirements, with all deliverables prepared for submission prior to award. The solicitation is structured as a subcontract under the NAICS code 541921, indicating it falls under other scientific and technical consulting services. Performance of the work is designated to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity was posted on July 30, 2026, and responses are due by August 10, 2026, with no set-aside classification specified. The contracting activity originates from the Nuclear Reactor Program within the Department of Defense.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Defense Logistics Bar-Coding and Shipment LabelingThe contract calls for the design and implementation of bar-coding and shipping labels compliant with MIL-STD-129, specifically supporting DLA logistics tracking through proper ZZ marking and the inclusion of special handling indicators. This work is essential to ensure accurate identification, traceability, and efficient movement of defense-supplied materials through the military supply chain. All labeling must adhere to strict military standards to guarantee compatibility with automated logistics systems and to meet regulatory requirements for defense logistics operations. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 541921, and is limited to small business entities. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026. Performance is required at the designated location in Texarkana, Texas, with a zip code of 75507-5000. The contracting authority is the Department of Defense, under the Land Supplier Operations Vehicle Support organization, and the work is critical to maintaining operational readiness through precise and standardized labeling practices across the defense logistics network.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Military Shipment Marking and UID/Barcode LabelingThe contract requires full compliance with military shipment marking standards MIL-STD-129 and UID labeling requirements under MIL-STD-130N, encompassing the accurate printing and validation of 2D Data Matrix barcodes on all applicable items. This work involves ensuring that each shipment is properly labeled with authorized markings, unique item identifiers, and machine-readable codes that meet Department of Defense specifications for traceability, inventory management, and logistics tracking. All labeling activities must be performed with precision to guarantee scannability, durability, and regulatory adherence throughout the supply chain. The work is to be performed at a designated location in Tracy, California, with a zip code of 95304-5000, under a subcontract type, and is part of the Nuclear Reactor Program administered by the Department of Defense. The NAICS code 541921 indicates this is a technical and scientific consulting service related to defense logistics and labeling systems. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, and interested parties must submit their proposals through the official DIBBS portal. Compliance with all technical standards is mandatory, and failure to meet labeling or barcode validation requirements may result in rejection of deliverables.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Hazard Communication & Labeling ServicesThe contract seeks a subcontractor to provide comprehensive hazard communication and labeling services, including the design, printing, and application of warning labels that meet OSHA’s Hazard Communication Standard and Department of Defense shipping requirements. All labels must ensure proper identification of chemical hazards, safety precautions, and regulatory compliance for materials handled within the Medical Supply Chain at Hurlburt Field, Florida, with a zip code of 32544-5668. The work is classified under NAICS code 541921, indicating it involves other scientific and technical consulting services, and is open for bid as a subcontract opportunity with a strict response deadline of August 5, 2026. The solicitation is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, emphasizing the critical nature of accurate and durable labeling for military medical logistics operations, where regulatory adherence directly impacts personnel safety and supply chain integrity.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 14 hours

Hazard Communication and Labeling ServicesThe contract calls for the design, production, and submission of hazard warning labels that meet OSHA compliance standards under DFARS 252.223-7001 and 29 CFR 1910.1200, ensuring proper communication of chemical hazards for materials used in Department of Defense applications. All labeling must adhere to the Globally Harmonized System of Classification and Labelling of Chemicals, including standardized pictograms, signal words, hazard statements, and precautionary statements, with precise formatting and durability suitable for military logistics and storage environments. Submission is required by August 7, 2026, and performance is localized to San Diego, California, with the contract classified as a subcontract under NAICS code 541921 for other scientific and technical consulting services. The agency responsible is the ASC Commodities Division within the Department of Defense, and the solicitation was posted on July 30, 2026, with no set-aside designation specified. All deliverables must be engineered for long-term legibility, environmental resilience, and full alignment with federal regulatory requirements to support safe handling, transport, and use of hazardous materials across defense supply chains.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Technical Documentation and Training Materials DevelopmentThe contract seeks the development of comprehensive technical documentation, user guides, instructor materials, and supplementary resources to support the training systems and curriculum of the SCSTC. The work involves creating clear, accurate, and user-centric materials that enable effective training delivery and system operation, tailored to meet the standards and operational needs of the Department of Defense. Deliverables must align with current training methodologies and technical specifications to ensure consistency, usability, and longevity across all training environments. The contract is classified as a subcontract under NAICS code 541921 and is issued by the Naval Surface Warfare Center Dahlgren Division. Performance is required at the location with zip code 22448, and responses are due by August 11, 2026, with the opportunity posted on July 30, 2026. While no specific set-aside criteria or point of contact are provided, the effort remains critical to sustaining training efficacy for defense-related systems and requires specialized expertise in technical communication and instructional design for military applications.

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

RESISTOR, FIXED, WIRE

Solicitation # SPE7M5-26-T-367E

This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

CONNECTOR BODY, RECE

Solicitation # SPE7M5-26-T-367P

This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367F

The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

RADOME, POLARIZER

Solicitation # SPE7M5-26-Q-0829

The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-367K

The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-367D

This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

SEMICONDUCTOR DEVICE, T

Solicitation # SPE7M5-26-T-366Y

The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.

Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367G

This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.

Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-26-Q-0830

The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

CLAMP, CABLE, ELECTRI

Solicitation # SPE7M5-26-T-366W

The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.

Other Building Material Dealers

POSTED

about 10 hours ago

DEADLINE

SWITCH, SEQUENCING

Solicitation # SPE7M5-26-T-367L

This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M5-26-T-366U

This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE