Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Mission-Critical Data Analysis Software License

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and licensing of the OMEGA-NEXT Professional software suite, which includes the Focus, Insight, Origin, Clarity, and Clarity Builder modules, designed for telemetry data visualization, analysis, and system configuration. This software is critical for mission-critical data processing and will be used to support advanced analytical workflows within NASA’s operations. The agreement is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, ensuring eligibility and preference for small business concerns as defined by the Small Business Administration. The North American Industry Classification System code 511210 applies, aligning the contract with software publishing activities. The contracting activity is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required to occur at Edwards, California, ZIP code 93523. The solicitation was posted on July 23, 2026, and responses are due by 6:00 p.m. on July 30, 2026. Although specific point of contact details are not provided, the contract’s full details and submission instructions are accessible through the federal procurement portal at the specified UI link. This contract supports NASA’s operational capability in handling complex telemetry systems through standardized, secure, and scalable software tools.

General Info

Supply and licensing of OMEGA-NEXT software for NASA telemetry operations under small business set-aside at Edwards, CA.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

511210 - Software PublishersView NAICS

Place of Performance

Edwards, CA, 93523, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
ContactsNo contacts available
OfficeN/A
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and licensing of OMEGA-NEXT Professional software suite including Focus, Insight, Origin, Clarity, and Clarity Builder modules for telemetry data visualization, analysis, and system configuration.

Similar Contracts

Same NAICS industry code

NAICS: 511210
New
SLED
Notice of Intent to Negotiate: Proof of Concept (PoC) Location Based Digital AssistantThe Port of Seattle intends to negotiate a proof of concept with Hello Lamp Post to deploy a location-based AI digital assistant at Seattle-Tacoma International Airport aimed at enhancing passenger experience through self-service, on-demand information delivered via QR codes. This 12-month pilot project, with a firm not-to-exceed cost of $44,756, seeks to evaluate the feasibility and effectiveness of an AI-powered virtual assistant integrated with the airport’s existing Atrius mapping platform to provide real-time, context-aware responses to travelers at key touchpoints. The solution must be fully deployment-ready, with no conceptual or prototype-only submissions accepted, and must be capable of capturing interaction data such as user engagement, common queries, and satisfaction metrics to inform future digital service strategies. All submissions must be sent via email by August 6, 2026, under the subject line “26-81 PoC Location Based Digital Assistant,” and must include detailed responses to 14 required elements covering contact information, organizational details, solution architecture, AI functionality, deployment readiness, and cost estimates. No formal contract clauses, evaluation weights, or award basis are established at this stage, as this is a pre-solicitation notice designed solely to gauge vendor interest and technical readiness. The project is software-only, with performance occurring entirely on-site at SEA Airport, and all submissions become public records under Washington State law, prohibiting the inclusion of proprietary, classified, or personally identifiable information. The Port of Seattle’s primary point of contact for inquiries is Maria Mayhue, with Liliya Jedidi serving as project manager, and no formal contracting officer, COR, or payment details are specified since this phase is strictly exploratory and non-binding.
Customer Service

POSTED

about 1 hour ago

DEADLINE

N/A
View Details
NAICS: 511210
New
SLED
AI-Powered Virtual Assistant DevelopmentThe contract is for the design and development of an AI-driven digital assistant that provides passengers with real-time, location-specific information through QR code triggers, enhancing the traveler experience atPort of Seattle facilities. The system must seamlessly integrate with existing airport infrastructure, including the Atrius platform, to ensure accurate, context-aware data delivery as passengers move through the terminal. This subcontract falls under the NAICS code 511210, indicating it is focused on software publishing and development, and is aimed at modernizing customer service through intelligent, on-demand technology. The project emphasizes real-time responsiveness, spatial awareness, and system interoperability to deliver a frictionless passenger interaction model. The work is to be performed in support of the Port of Seattle’s Customer Service division, with no specific place of performance details provided, suggesting the solution may be deployed across multiple airport locations. The solicitation was posted in July 2026, indicating an upcoming procurement cycle for this technological enhancement. While no set-aside type or point of contact is listed, the emphasis on integration with operational systems like Atrius underscores the need for a robust, scalable, and secure solution capable of handling high-volume, dynamic airport environments. The goal is to transform passive information access into an intuitive, location-triggered experience that reduces passenger confusion and improves overall service efficiency.
Customer Service

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 511210
New
Federal
Sources Sought - FY26 N&NC Omnissa Horizon Annual Software RenewalThe Peterson Space Force Base is seeking information from vendors regarding the annual renewal of Omnissa Horizon software coverage for the period from September 30, 2026, to September 29, 2027, with a requirement for 300 annual license support units. This solicitation, identified as FA2517260724, is issued under the title FY26 N&NC Omnissa Horizon Annual Software Renewal and is categorized as a sources sought notice, indicating the government is gathering market intelligence rather than issuing a formal request for proposals. Responses are due by July 29, 2026, at 4:00 p.m. Eastern Time, and no set-aside preferences are specified. The contracting office is located at the 21st Contracting Squadron, Building 350, Peterson Space Force Base in Colorado Springs, Colorado, with primary and secondary points of contact available for inquiries. The opportunity is posted under the Department of Defense and managed by the Office of the 21st Contracting Squadron, with Devin Higgins as the primary point of contact and Kristina Worthing as the secondary. All inquiries and responses must be directed through the official SAM.gov portal, and no NAICS code is provided, suggesting the scope may span multiple classifications or is still under review. The place of performance is listed as Colorado Springs, Colorado, aligning with the base location, and no indication of remote or alternate performance locations is given. Vendors are expected to provide information on their ability to deliver and support the required software licenses annually, with an emphasis on continuity of service and compliance with federal software maintenance standards.
FA2517 21 Cons Bldg 350

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 332710
New
Federal
The contractor shall provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured (AM) tensile blanks in accordance with the attached drawings and specifications. The Government will furnish the GRX-810 blanks. The cThe contractor is required to provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured tensile blanks in strict accordance with provided drawings and specifications. GRX-810 is a nickel-based superalloy exclusively furnished by the Government and may not be substituted or procured by the contractor under any circumstance. All work must be completed and delivered to NASA Glenn Research Center in Cleveland, Ohio, within a lead time of twelve weeks or less, with delivery terms specified as FOB Destination, meaning risk of loss and title transfer occur upon arrival at the destination. The contract is a Firm-Fixed-Price award under a Total Small Business Set-Aside using the Lowest Price Technically Acceptable (LPTA) evaluation method, where offers must be technically acceptable to be eligible for award, and the lowest-priced compliant offer will be selected. Offerors must submit their bids via email to Shanna L. Patterson at Shanna.l.Patterson@nasa.gov, clearly referencing the solicitation number 80NSSC26938931Q in the subject line, and include their CAGE/UEI code, FOB destination, lead time for delivery, and point of contact name and email. Payment will not be made by credit card and is subject to Government payment procedures. The contractor must comply with all applicable export control regulations including ITAR and EAR, particularly regarding access to controlled technical data at the delivery site by foreign persons, and obtain necessary export licenses in advance. Duty-free entry provisions under FAR 52.225-8 apply if foreign-sourced supplies exceed $20,000 in value, requiring advance notification to the Contracting Officer, proper marking of packages with “UNITED STATES GOVERNMENT” and agency title, inclusion of shipping documents, and adherence to customs regulations under 19 CFR Part 142. The contractor must maintain complete records of export compliance and flow down applicable clauses to subcontractors. All deliveries must be properly documented with the contract number, delivery address, carrier details, and notation of duty-free entry. The contracting office is the NASA Shared Services Center located at Stennis Space Center, Mississippi, and only small business entities registered in SAM.gov with accurate CAGE/UEI information are eligible to respond. No contract value has been disclosed and will be determined upon award based on submitted pricing.
Machine Shops

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
Federal
AAR Mobility SystemsThe contract opportunity titled AAR Mobility Systems under solicitation number 80NSSC26937581Q is a total small business set-aside as defined under FAR 19.5, targeting small business concerns for award. It was posted on July 24, 2026, with a response deadline of July 27, 2026, at 9:00 PM CT, suggesting a short turn-around period for submissions. The solicitation is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the office located at Stennis Space Center, Mississippi, and the place of performance specified as Edwards, California, 93523. The NAICS code 332999 indicates the nature of the work involves other miscellaneous manufacturing, which may relate to mobility systems or specialized equipment support. Primary and secondary points of contact are Tracy Bremer and Will Garrett, both reachable via NASA email addresses. The contract is classified as combined, suggesting it may integrate elements of both acquisition and service procurement, though specific deliverables, pricing, performance timelines, evaluation criteria, and technical requirements are not accessible due to system errors and unauthorized access issues. No contract clauses, specifications, packaging requirements, inspection standards, or special conditions are available, and the estimated contract value remains unspecified. All solicitation documents including the RFQ, SOW, and Q&A are referenced as attached but unavailable for review in this context.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 3 days
View Details