Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Mobile Trailer-Based Oil Purification Unit Manufacturing

Active

Federal

Response Deadline08/11/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the design, fabrication, and assembly of a mobile, trailer-mounted system to purify insulating oil from high-voltage transformers, incorporating vacuum dehydration, multi-stage filtration, and integrated pumping technologies to restore oil to optimal performance standards. The unit must be fully self-contained, transportable, and engineered for field deployment in diverse operating environments, ensuring reliable and efficient oil conditioning without requiring permanent installation. All components must meet rigorous industry specifications for safety, durability, and operational effectiveness under continuous use in high-voltage transformer maintenance scenarios. This is a subcontract under the SBA Certified Women-Owned Small Business Program Set-Aside, exclusively available to WOSB-certified entities, with a NAICS code of 333998 for other specialized machinery manufacturing. The opportunity was posted on August 5, 2026, with proposals due by August 11, 2026, and is issued by the Grand Coulee Power Office within the Department of the Interior. Performance will occur at an undesignated location, and the system is intended for direct use in maintaining and extending the operational lifespan of transformer assets within federal power infrastructure.

General Info

Design, fabricate, and assemble mobile trailer-mounted oil purification system for federal transformer maintenance.

Agency

Department Of The Interior → Grand Coulee Power OfficeView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

WA

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 09:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Grand Coulee Power Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Grand Coulee Power Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, fabrication, and assembly of a mobile, trailer-mounted transformer oil purification system with vacuum dehydration, filtration, and pumping systems for insulating oil from high-voltage transformers.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8EF-26-T-1567

The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

LIFTER ASSEMBLY

Solicitation # SPE7M2-26-T-6025

The LIFTER ASSEMBLY is a defense-related item with the NSN 1720-00-994-6267, requested in a quantity of two units under Purchase Request 7017227143, with a delivery deadline of 131 days after delivery order. The item is subject to stringent export control regulations under either ITAR or EAR, meaning its technical data cannot be disclosed to foreign persons, including foreign nationals employed by U.S. companies or subsidiaries, without prior authorization from the Department of State or Department of Commerce. Distribution of this technical data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled data, and have been formally approved by DLA to access such information. The solicitation, identified as SPE7M2-26-T-6025, was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 333998. Performance of the contract is designated for New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Alisha Blanton of the Department of Defense’s Nuclear Reactor Program, reachable via email and phone. The contract is managed through the DLA and fully subject to DFARS 252.225-7048 regarding export control compliance.

NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

BRACKET, CYLINDER ST

Solicitation # SPE8E9-26-T-3323

The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

COALESCING PLATE AS

Solicitation # SPE7M1-26-T-227C

The contract is for the procurement of seven coalescing plate assemblies with part number 6051700-G2 and NSN 4330014863398, issued under solicitation SPE7M1-26-T-227C by the Department of Defense’s Maritime Supply Chain. Delivery is required within 168 days of contract award, with shipment to be made FOB origin and final inspection and acceptance to occur at the destination facility in New Cumberland, Pennsylvania. The units must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using specified packaging materials and methods, and palletized according to DLA’s packaging requirements. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for approved exemptions such as batteries, fluorescent lights, sensors, weapon systems, and specific chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The unit of issue is each, with zero variance allowed in quantity, and the total contract value is $49.00 at a unit price of $7.00 per unit. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions referenced as of the solicitation issue date, and special handling and shipping instructions are defined by DLA Procurement Notes C19 and C20.

MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

HEAD, SPRINKLER, FIRE

Solicitation # SPE8E6-26-T-4007

The contract solicitation SPE8E6-26-T-4007 is for the procurement of four fire sprinkler heads, part number 2-1/2 in. SCF70W brass, identified by NSN 4210-01-386-3436, to be supplied by BETE FOG NOZZLE, LLC from Greenfield, Massachusetts. The total contract value is $16.00, with a unit price of $4.000 per item. Delivery is required within 167 days of the award date, with an original delivery target of November 15, 2026, and a need ship date of February 1, 2027, under FOB Origin terms, meaning title and risk transfer to the Government upon release from the contractor’s facility. All supplies must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, where inspection and acceptance will occur. Packaging must adhere strictly to MIL-STD-2073-1E and DLA Packaging Requirements (RP001), with unit containers designated as D3, preservation method set to clean/dry, and no preservation material used. Marking must follow MIL-STD-129 with no special marking required, and all shipments must be barcoded and labeled for automated processing. Mercury and mercury-containing compounds are strictly prohibited in the sprinkler heads unless exempted for functional use in instruments, sensors, controls, or required chemical reagents under NAVSEA 5100-003D, with portable items containing mercury requiring shock-proof enclosures and a secondary containment boundary. The contract incorporates numerous FAR and DFARS clauses applying to trafficking in persons, employment eligibility, sustainable products, hazardous material identification, cybersecurity safeguards, subcontracting, payment acceleration for small businesses, and prohibitions on mercury, hexavalent chromium, and items sourced from communist Chinese military companies. The use of WAWF is mandatory for all payment requests and receiving reports. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and offerors must provide complete Safety Data Sheets for any hazardous materials and submit hazard warning labels prior to award. All submissions must be made electronically through the DIBBS portal by August 17, 2026, and offerors must be registered in SAM.gov with valid UEI and CAGE codes. The award methodology is implied to be Lowest Price Technically Acceptable, though

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

NEEDLE, DISSECTING

Solicitation # SPE2DH-26-T-5821

The contract specifies the procurement of curved dissecting needles made of steel, each 2 inches long with sharp points and sized at 36S, intended for use with the 08-955 holder. The unit of issue is a package containing 36 needles per pack, with a total order quantity of three packs. The item is identified by NSN 6640-01-181-3173 and is part of a solicitation issued under SPE2DH-26-T-5821, with a response deadline of August 12, 2026, and a required delivery date within 20 days after award. The acquisition falls under NAICS code 333998 and is managed by the Department of Defense through the Medical Supply Chain FSH office, with delivery required to Fort Campbell, Tennessee. Compliance with technical and quality standards is mandatory, as referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to commercial standards, with each unit sealed in protective containers and shipped in exterior containers suitable for safe transport via common carrier at the lowest rate. All items must be marked in accordance with Medical Marking Standard No. 1, replacing MIL-STD-129, and copies of this standard are available through DLA Troop Support. The contract also includes provisions for the removal of government identification from non-accepted supplies and indicates that covered defense information may apply, requiring adherence to applicable cybersecurity and data handling protocols. The primary point of contact for inquiries is Tina Vu, reachable via email and phone provided in the contract data.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 16 hours ago

DEADLINE

TEST PAPER, CHLORINE

Solicitation # SPE2DH-26-T-5823

The contract specifies the procurement of chlorine test strips, labeled as INSTA-TEST STRIPS, designed to provide instant measurements for free chlorine ranging from 0 to 10 ppm, bromine from 0 to 20 ppm, alkalinity from 0 to 180 ppm, pH from 6.8 to 8.4, and total hardness from 50 to 800 ppm. Each unit is packaged as 50 strips per bottle, blister-carded, with 12 bottles per case totaling 600 strips, and the unit of issue is a single package containing 600 strips. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is sealed in a container that protects against damage or breakage, and shipped in suitable exterior containers capable of safe delivery via common carrier at the lowest possible rate to the designated delivery point on Joint Base Lewis McChord, 98433-5000. Materials must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The solicitation incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies, and the contract is identified by solicitation number SPE2DH-26-T-5823, NSN 6640-01-566-7340, with a delivery requirement of five days after award.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 16 hours ago

DEADLINE

REDUCER, HOSE, FIRE F

Solicitation # SPE8E6-26-T-3992

The contract specifies the procurement of a fire fighting hose reducer, part number 13218E0470-42, constructed from cast or forged brass in accordance with MIL-DTL-52404C, featuring a 2.5-inch National Hose internal thread with swivel and a 1.5-inch National Hose external thread. Plating is not required, and first article testing is mandatory with two units submitted for testing under government quality assurance representative observation, as dictated by MIL-C-52404C and referenced quality assurance provisions. The item is governed by strict inspection and acceptance protocols at origin, with sampling to comply with MIL-STD-1916 or comparable zero-based plans, and non-conformances not permitted unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking requirements. The contract includes a separate line item for the first article test unit priced at $1.00, which is non-reimbursable if the test requirement is waived, and the main procurement line item for 11 units at $11.00 each totaling $121.00, with delivery required within 227 days FOB origin to the DLA New Cumberland facility. All technical and quality requirements referenced are incorporated via the DLA Master List, including specific provisions for casting and forging assistance requests if tooling is unavailable to the contractor. The drawing and specification control revisions are detailed and dated, with the governing standard being MIL-DTL-52404C, and the product classified as Type XV, Class D. The contract explicitly prohibits government identification removal from non-accepted supplies and includes protections for covered defense information. Delivery is restricted to the specified origin point with zero variance allowed in quantity, and transportation logistics are governed by specific DLA procedural notes. The solicitation number is SPE8E6-26-T-3992, with a response deadline in August 2026 and a required delivery date set for April 2027.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

SEAL, TAMPER PROOF

Solicitation # SPE8E6-26-T-4062

The contract solicitation SPE8E6-26-T-4062, issued by the Department of Defense through DLA Dist San Joaquin, seeks the procurement of 252 tamper-proof seals identified by NSN 4210014461015 under a Women-Owned Small Business set-aside. The item, designated as SEAL, TAMPER PROOF, is priced at $252.000 per unit for a total contract value of $63,504.00, with a fixed quantity and zero variance allowance. Delivery is required FOB Origin within 69 days of order, to the designated receiving warehouse at Tracy, California, with both inspection and acceptance occurring at the destination. Packaging and labeling must strictly comply with MIL-STD-129 for marking and barcoding, and palletization must follow DLA’s RP001 Packaging Requirements. Packaging methodology is contingent on hazard classification per FED-STD-313: non-hazardous items must meet ASTM D3951 unless superseded by a higher-priority requirement from the DLA Master List of Technical and Quality Requirements, which governs all compliance. Hazardous material, if applicable, must adhere to TQ requirement IP025. All packaging must reflect the specified Unit of Issue (MX) and Quantity per Unit Pack (QUP:001) as mandated by the contract. The solicitation incorporates a suite of FAR and DFARS clauses including Authorization and Consent (52.227-1), Unenforceability of Unauthorized Obligations (52.232-39), Accelerated Payments to Small Business Subcontractors (52.232-40), Safeguarding Covered Contractor Information Systems (52.240-93), Postaward Small Business Program Representation (52.219-28), Notification of Potential Safety Issues (252.246-7003), and Transportation of Supplies by Sea (252.247-7023), with deviations and alternates explicitly noted. Offerors must be SBA-certified as a Women-Owned Small Business and provide valid Unique Entity ID and CAGE codes, with mandatory electronic submission through the DIBBS portal by August 17, 2026. Invoicing is exclusively through the Wide Area WorkFlow system, and compliance with the Buy

DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

COUPLING ASSEMBLY, HOSE

Solicitation # SPE8E9-26-T-3300

The contract is for the procurement of four coupling assemblies, hose, fire fighting, identified by NSN 4210-00-368-2904 and part number 502, manufactured by Service Brass and Aluminum Foundry in Phoenix, AZ. Each coupling is brass with both ends female, featuring a 2-1/2 inch NH swivel interface with eight flat lugs and must be marked in accordance with MIL-STD-130 Section 5.3.1. Configuration control follows MIL-STD-973, excluding specific subparts. The product must not contain intentionally added mercury or mercury-containing compounds, except for limited functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is scheduled for 167 days after award, with FOB origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination. The shipment must be sent to the DLA Distribution facility in New Cumberland, PA, under the parcel post address provided, and transportation instructions follow DLAD Proc Notes C19 and C20. The original required delivery date is October 27, 2026, with a needed ship date of February 1, 2027. The solicitation was issued under SPE8E9-26-T-3300 with a response deadline of August 17, 2026, and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with covered defense information potentially applicable. The unit of issue is each (EA), and the contract falls under NAICS code 333998 with the Department of Defense as the contracting agency.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

TIE DOWN, CARGO, VEHICLE

Solicitation # SPE8EF-26-T-1575

This contract is for the procurement of 260 units of cargo vehicle tie-downs under the NSN 3990-01-619-7774 and part number 592736, issued by the Defense Logistics Agency through solicitation SPE8EF-26-T-1575. The requirement is set as a total small business set-aside, with delivery due 167 days after award, no later than February 1, 2027, and must be shipped FOB origin with zero variance in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and packaged according to MIL-STD-129, with palletization following DLA Packaging Requirements. The unit price is $260.00 per unit, totaling $67,600.00, and inspection and acceptance occur at the destination. The supplies are to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by specific DLA procedural notes C19 and C20. Government identification must be removed from non-accepted supplies, and the contract incorporates provisions for covered defense information. The point of contact for inquiries is Russell Keiser, and the NAICS code is 333998.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

TUBE ASSEMBLY, FIRE

Solicitation # SPE8E6-26-T-3991

The contract is for the procurement of two tube assemblies for a fire extinguishing system, identified by part number 65506-09014-042 and NSN 4210000895252, to be supplied by ROTAIR AIRCRAFT CORP to SIKORSKY AIRCRAFT CORP. The item must conform to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. All packaging and labeling must comply with MIL-STD-129 and DLA’s packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification and is subject to Covered Defense Information protocols. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and the delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, with a required delivery date of February 1, 2027, and a lead time of 167 days from the contract award. The unit of issue is each, with a total contract value based on the specified quantity. The contract is issued under solicitation SPE8E6-26-T-3991 with performance directed to DLA Distribution in San Diego, California, and procurement is restricted due to proprietary or insufficient data for competitive bidding.

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of The Interior → Grand Coulee Power Office

Same awarding agency

Technical Documentation and Manuals DevelopmentA subcontract is being issued under the SBA Certified Women-Owned Small Business Program Set-Aside for the development of comprehensive technical manuals for transformer oil systems, including operation, maintenance, safety, and parts documentation in English. The work must adhere strictly to federal documentation standards and ensure complete technical accuracy to support safe and efficient system management. The solicitation, posted on August 5, 2026, requires responses by August 11, 2026, and is managed by the Grand Coulee Power Office within the Department of the Interior. The North American Industry Classification System code for this effort is 541618, indicating it pertains to other scientific and technical consulting services. Only SBA-certified Women-Owned Small Businesses are eligible to respond, and performance is expected to be conducted in support of federal infrastructure projects under the agency’s jurisdiction.

Other Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Trailer Fabrication and MountingThe contract involves the custom fabrication of a DOT-compliant trailer specifically engineered to support the secure mounting and transport of an oil purification system under outdoor and mobile operating conditions. The trailer must include a robust structural frame, integrated lighting and braking systems that meet all federal transportation safety standards, and mounting hardware designed to ensure stability and safety during transit. The fabrication work must align with industry best practices for durability and regulatory compliance, particularly for use in high-demand field environments. This opportunity is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, with the NAICS code 336212 indicating it falls under the manufactured home and trailer manufacturing category. The solicitation was posted on August 5, 2026, with responses due by August 11, 2026, and is issued by the Grand Coulee Power Office within the Department of the Interior. While the precise performance location is unspecified, the work requires delivery and installation capabilities suitable for remote or field-based operational sites.

Truck Trailer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Control Panel and Instrumentation SupplyThe contract seeks the design and supply of an integrated NEMA 4X control panel equipped with sensors to monitor temperature, pressure, vacuum, flow rate, and oil quality, along with a human-machine interface or programmable logic controller for operational control. The panel must be ruggedized for harsh environments, ensuring reliable performance under demanding industrial conditions, and must integrate all sensory inputs into a unified system that provides real-time data and control capabilities. The equipment is to be delivered as a fully assembled and tested unit, ready for installation, with documentation and support for integration into existing systems. This is a subcontract opportunity set aside under the SBA Certified Women-Owned Small Business Program, with the NAICS code 334519 covering other electrical equipment and component manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 9:00 PM. The contracting activity is the Grand Coulee Power Office under the Department of the Interior, and while specific location details are not provided, performance is expected to align with the agency’s operational needs. Only eligible WOSB entities may submit proposals, and the award will be made based on technical capability, compliance with specifications, and pricing competitiveness.

Other Measuring and Controlling Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Hydraulic and Pumping System IntegrationThe contract mandates the supply and integration of positive displacement pumps, valves, and hydraulic controls specifically for use in an oil purification system, ensuring reliable transfer and circulation of oil under demanding operational conditions. The equipment must be engineered for durability and precision, with emphasis on maintaining consistent flow rates and pressure stability throughout the purification process, and is intended for deployment within federal facilities managed by the Department of the Interior. This is a subcontract set aside exclusively under the SBA Certified Women-Owned Small Business (WOSB) Program, requiring proposers to meet specific certification and ownership criteria. The NAICS code 333911 indicates the scope falls under other commercial and service machinery manufacturing, and all responses must be submitted by the deadline of August 11, 2026. The work is to be performed at an unspecified location under the oversight of the Grand Coulee Power Office, with no public point of contact listed; interested parties must engage through the provided SAM.gov portal for full details and submission requirements.

Pump and Pumping Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Filtration and Particulate Removal ModuleThe contract seeks the supply of high-efficiency mechanical and adsorbent filtration modules designed to remove particulates, acids, and sludge from transformer oil, ensuring compatibility with field maintenance protocols and featuring replaceable cartridges for operational continuity. These modules must meet rigorous performance standards to preserve transformer integrity and extend service life under demanding conditions, with an emphasis on ease of integration and reliability during routine servicing. The procurement is structured as a subcontract under the SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside, specifically targeting businesses certified under the WOSB Program as outlined in FAR 19.15, and falls under NAICS code 333921 for other commercial and service industry machinery manufacturing. The opportunity was posted on August 5, 2026, with a response deadline of August 11, 2026, at 9:00 PM Eastern Time, and is managed by the Grand Coulee Power Office under the U.S. Department of the Interior. While specific location details for performance or delivery are not provided, the modules are intended for use in field environments where transformer maintenance is conducted, requiring systems that are durable, scalable, and suitable for remote or off-grid applications. All proposals must align with the WOSB set-aside requirements, ensuring only eligible women-owned small businesses can respond, and submissions must be complete and compliant with federal contracting guidelines to be considered.

Elevator and Moving Stairway Manufacturing

POSTED

about 21 hours ago

DEADLINE

High-Vacuum Dehydration System SupplyThe contract is for the supply of a self-contained vacuum dehydration subsystem designed to remove moisture from transformer oil, integrating a vacuum pump, heater, and control interface, all of which must comply with IEEE C57 standards. The system is intended for use in high-voltage power applications where oil integrity is critical to equipment performance and safety. The solicitation is a subcontract under the SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside, limiting eligibility to businesses certified under this program. The NAICS code 333291 indicates the procurement falls under Other Commercial and Service Industry Machinery Manufacturing. The contract was posted on August 5, 2026, with responses required by August 11, 2026, and is procured by the Grand Coulee Power Office under the Department of the Interior. The place of performance and point of contact details are unspecified, and the full opportunity can be accessed through the provided SAM.gov link.

Paper Industry Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Mobile Transformer Oil Dry Out Purification System

Solicitation # 140R1726Q0033

The U.S. Department of the Interior, through the Grand Coulee Power Office, is seeking quotations for a Mobile Transformer Oil Dry Out Purification System under solicitation number 140R1726Q0033, issued as a combined synopsis and solicitation in accordance with FAR Part 12. This procurement is exclusively set aside for SBA-certified Women-Owned Small Businesses under the WOSB Program, and all offers must be submitted by the deadline of August 11, 2026, at 9:00 PM Eastern Time. The acquisition is classified under NAICS code 333998, which covers other agricultural, construction, and mining machinery manufacturing. The system is intended for use at the agency’s facility in Grand Coulee, Washington, with no additional performance location specified beyond the office address provided. All offers must comply with the provisions and clauses incorporated by reference, accessible electronically via www.acquisition.gov, and no separate written solicitation will be issued. The primary point of contact for questions or clarifications is Donald Richer, reachable at 509-633-9515 or donald_richer@ios.doi.gov. The announcement was posted on August 5, 2026, and interested vendors must submit responsive quotes through the SAM.gov portal linked in the solicitation. No formal bid submission format is prescribed other than adherence to the requirements outlined in the incorporated clauses and the commercial item acquisition procedures outlined in FAR Part 12.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Compliance and Supply Chain Reporting Services

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Aluminum Gate Component Manufacturing (Die Casting)

Steel Wire Drawing

POSTED

DEADLINE

Vehicle Access Control Gate System Supply and Installation

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

DEADLINE

56--VEHICLE ACCESS CONTROL GATES

Solicitation # 140R1726Q0027

The contract titled 56--VEHICLE ACCESS CONTROL GATES is a Small Business Set Aside under the SBA program, reserved exclusively for small businesses, with a NAICS code of 331222 indicating specialization in aluminum die casting. It is issued by the Grand Coulee Power Office within the Department of the Interior, with the Solicitation Number 140R1726Q0027, posted on August 4, 2026, and requiring responses by August 14, 2026, at 9:00 PM Eastern Time. The primary point of contact is Donald Richer, reachable at 509-633-9515 or donald_richer@ios.doi.gov, and the office is located in Grand Coulee, Washington, with a ZIP code of 99133. The place of performance is not specified beyond the agency’s location, and the contract aims to address needs related to vehicle access control gates, with interested parties directed to the SAM.gov portal for full solicitation details.

Steel Wire Drawing

POSTED

DEADLINE

Supply of Atlas Copco Roto-Xtend Compressor Lubricant OilThe contract entails the delivery of nine 55-gallon barrels of Atlas Copco Roto-Xtend duty fluid lubricant oil to Grand Coulee, Washington, specifically for use in compressor systems requiring OEM-compliant and federally approved environmental standards. The lubricant must meet stringent technical specifications to ensure optimal performance and compliance with regulatory requirements for energy and environmental stewardship. The order is structured as a subcontract under the Grand Coulee Power Office, a division of the Department of the Interior, with the North American Industry Classification System code 324191 indicating classification within other petroleum and coal products manufacturing. The opportunity was posted on July 16, 2026, and the place of performance is fixed at Grand Coulee, WA, with no additional details provided on delivery timelines, payment terms, or point of contact.

Petroleum Lubricating Oil and Grease Manufacturing

POSTED

DEADLINE