Modular Cryogenic Liquid Nitrogen Production System - OEM Equipment Manufacturer Inquiry

Request for Information 1. Purpose This Request for Information (RFI) is issued to identify qualified original equipment manufacturers (OEMs) capable of supplying a commercial off-the-shelf (COTS), modular, skid-mounted cryogenic air separation unit (ASU) for the production of high-purity liquid nitrogen. The Government is seeking equipment manufacturers only'not general contractors or engineering firms'who can provide the equipment only or equipment with a complete turnkey solution including surrounding infrastructure design, fabrication, delivery, installation, and commissioning of the system. The produced liquid nitrogen will be routed directly into existing on-site liquid nitrogen storage tanks. The system must be compatible with standard industry transfer connections and designed to integrate seamlessly with existing infrastructure. Location: Building 3305, High Pressure Gas Facility, Stennis Space Center, MS 39529 2. System Requirements The proposed system must meet the following minimum technical and operational requirements: 2.1 Production Capacity (2 separate systems being considered) Approximately 75 & 100 tons per day (TPD) of liquid nitrogen with (20-25%) turndown capability. Grade B Liquid Nitrogen (Reference MIL-PRF-27401) 2.2 Technology Cryogenic air separation process only (no membrane or PSA systems) Fully automated operation with remote/local/unattended control capabilities 2.3 Design & Footprint Modular, skid-mounted, train-style configuration Highly prefabricated skids with interconnecting piping and wiring Maximum total footprint: 180 ft x 50 ft Includes all electrical and cooling equipment (if required) 2.4 Turnkey Scope OEM must provide: Complete system design Fabrication and factory testing Delivery and installation Commissioning and activation Operator training and documentation 2.5 Operational Features State-of-the-art analytical instrumentation User-friendly HMI/SCADA interface Designed for ease of installation, operation, and relocation Emphasis on cost efficiency, low maintenance, and energy savings Must include liquid nitrogen transfer system compatible with existing LN? storage tanks (the plant will be up to 50ft to tie-in point) 3. Requested Information - Interested OEMs are requested to submit the following: Company profile, UEI, business size, and relevant experience with cryogenic ASUs Technical specifications of the proposed system System layout drawings or conceptual diagrams Utility requirements (power, water, etc.) Estimated lead time for: Procurement/fabrication Delivery Installation and commissioning Maintenance and support offerings References or case studies of similar systems delivered Manufacturing and U.S. Presence Please include: - Country of manufacture for major system components - U.S.-based presence (e.g., offices, service teams, fabrication facilities) - Availability of U.S.-based technical support and field service personnel Pricing Information Please provide the following pricing details: Rough Order of Magnitude (ROM) pricing for equipment only (75 & 100 TPD systems each) Rough Order of Magnitude (ROM) pricing for each complete turnkey system Breakdown of pricing by major components (e.g., ASU, instrumentation, skids, installation, etc.) Tariff-impacted pricing: Include any applicable import duties or tariffs Non-tariff pricing: Provide pricing assuming no tariffs or duties apply Notes on tariff origin: Identify any components or subsystems sourced from countries subject to U.S. import tariffs Additional RFI information The market research information gathered from this RFI will be used to develop and plan any potential future procurement. Based upon information submitted in response to this RFI, NASA will determine the final content of any future solicitation(s). A determination by the Government not to procure this requirement, based upon responses to this notice, is solely within the discretion of the Government. Although all comments received will be carefully reviewed and considered for inclusion in any possible later action, the initiators of this request make no commitment to include any recommendations. Respondents will NOT be notified of the results of the analysis of submissions received. This notice should not be construed as a formal Request for Quotation (RFQ) or Proposal (RFP) (solicitation). Responses to this RFI are not offers and cannot be accepted by NASA to form a binding contract. This notice is not to be construed as a commitment by the Government to make a purchase, nor will the Government pay for the information solicited or be held liable for any information obtained. Submission of any information in response to this notice is completely voluntary. Responses should be based on the material contained in this notice and any other relevant information the contractor thinks appropriate. Comments or suggestions relevant to this requirement are welcome and may also be included in the response. Contractors are welcome to submit any additional documentation that may support their ability to comply with the Government's requirement. No solicitation exists; therefore, do not request a copy of the solicitation. If an ombudsman is needed, contact Melissa Wagner at melissa.r.wagner@nasa.gov. Acronym Definition ASU Air Separation Unit BOM Bill of Materials COTS Commercial Off-The-Shelf DCS Distributed Control System DOE Department of Energy EPC Engineering, Procurement, and Construction FAT Factory Acceptance Testing HMI Human-Machine Interface HPGF High Pressure Gas Facility HVAC Heating, Ventilation, and Air Conditioning LN? Liquid Nitrogen MIL-PRF Military Performance Specification NASA National Aeronautics and Space Administration NFPA National Fire Protection Association NFPA 70E Standard for Electrical Safety in the Workplace OEM Original Equipment Manufacturer O&M Operations and Maintenance PLC Programmable Logic Controller PSA Pressure Swing Adsorption PSSR Pre-Startup Safety Review QA/QC Quality Assurance / Quality Control ROM Rough Order of Magnitude RFI Request for Information SCADA Supervisory Control and Data Acquisition SSC John C. Stennis Space Center TPD Tons Per Day UEI Unique Entity ID UPS Uninterruptible Power Supply USA United States of America Responses to Questions: Will NASA consider an onsite supply agreement for LIN on a BOO basis? The RFI appears to be structured more as an equipment purchase. NASA Response: NASA will not consider an agreement for LIN on a BOO Bases. We plan to procure, own, and operate the system. When is the LIN demand from the RFI scope expected to begin? NASA Response: This is replacement of current LIN demand. The scope is expected to begin in FY26 depending on available funding and RFI responses. Is this a new LIN demand, or is the scope intended as a cost-savings initiative to replace existing transported LIN supply? NASA Response: This is not a new LIN demand, a scope intended as a cost savings initiative to replace existing transported LIN supply. This scope is intended to supply the current LIN Tanks/System. What is the required LIN pressure at the battery limit? NASA Response: Our current LIN storage tanks stay under 5 psi. The liquid nitrogen is pumped/vaporized up to 6000 PSI, but usually stays between 3000 - 4000 PSI. Should contractors assume that NASA will provide the necessary cooling water for the system, or should we plan to include our own cooling system? NASA Response: The OEM will supply the cooling water system if required.