Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Generator Equipment Supply and Installation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply and installation of two 1750kW generators at NASA's Stennis Space Center. The scope includes not only delivering the generator units but also mounting them on elevated platforms to ensure proper positioning and accessibility. Additionally, the work encompasses connecting the generators to existing fuel systems, as well as installing necessary piping and controls to integrate the equipment fully into the current infrastructure. This subcontract, classified under NAICS code 333120, is aimed at enhancing the power infrastructure at the facility by providing reliable and high-capacity generator equipment. The project requires careful coordination to meet NASA's specifications for operational functionality, safety, and compliance. Located at the Stennis Space Center, the installation will support the center's ongoing operations and mission-critical activities by ensuring uninterrupted power supply through these advanced generator systems.

General Info

Supply and install two 1750kW generators with platforms, fuel connections, piping, and controls at NASA Stennis.

Agency

National Aeronautics And Space Administration → NASA Stennis Space CenterView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

Stennis Space Center, MS, 39529, USA

Set-Aside

NONE

Documents

This scope was carved out of 80SSC026F0007.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

JOFOC for SSC Tornado Resiliency - Generator Replacement for Test Complex

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 19

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Stennis Space Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Stennis Space Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and installation of two 1750kW generators, including mounting on elevated platforms and connection to fuel systems, piping, and controls.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7MC-26-T-243D

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Forklift Supply – 10,000 lb LP Pneumatic Tire ModelThe City of Buffalo is seeking a subcontract for the supply of one new 10,000 lb capacity LP-powered forklift. The required equipment must feature pneumatic tires, a triplex mast, and UL certification. This contract includes a provision allowing for the purchase of additional units at the original bid price through June 30, 2027. The solicitation was posted on August 28, 2026, with a response deadline of September 11, 2026, at 3:00 PM. This procurement falls under NAICS code 333120 and is managed by the City of Buffalo in New York.

City of Buffalo

POSTED

DEADLINE

PARTS KIT, TRACK SHOE C

Solicitation # SPE7L3-26-T-182Q

Solicitation SPE7L3-26-T-182Q is a fixed-price request for quotations issued by DLA Land and Maritime for 461 track shoe connector parts kits under NSN 2530-01-339-3525. The kits consist of one end connector and one connector bolt and are designated as critical application items. Production must adhere to specific technical data and reference drawings, including 19207 57K0986, 19207 12556911, and 19207 57K7881. A forging process has been identified for manufacture, and the government will not evaluate offers utilizing additive manufacturing. Delivery is required within 158 days, with a need ship date of February 2, 2027, and a final required delivery date of July 3, 2027, to DLA Distribution Red River in Texarkana, Texas. The contract specifies FOB Origin for delivery, inspection, and acceptance. Quality assurance is stringent, requiring manufacturer compliance with SAE AS9003 or ISO 9001, and testing results must be available for government review prior to acceptance. Sampling shall follow MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AK13393525. Additional requirements include a CMMC Level 2 Self-Assessment and compliance with the Buy American Act and Berry Amendment. Price evaluation preferences are available for certified HUBZone Small Business Concerns. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Front-End Loader Attachment SupplyThe Texas Workforce Commission is seeking a subcontractor for the supply of one new front-end loader attachment. This equipment must be compatible with a utility tractor and specifically designed to support adaptive hand-actuated operation. The procurement is categorized under NAICS code 333120. Interested parties must submit their responses by the deadline of October 6, 2026. Further details regarding this opportunity can be accessed through the Texas SmartBuy portal.

Texas Workforce Commission

POSTED

DEADLINE

in about 1 month

Class D Duty Cycle Crawler Crane Supply and Delivery

W07V Endist Memphis

POSTED

DEADLINE

in about 19 hours

Dynamic Cone Penetrometer (DCP) Kit SupplyThis subcontract involves the supply of Dynamic Cone Penetrometer kits weighing 17.6 pounds, designed to assess soil strength and aircraft passability on austere runways in accordance with USAF standards. The procurement is managed by the Department of Defense under the agency FA5575 496 Abs Pk, with the place of performance located in Moron, Spain. The opportunity was posted on August 28, 2026, with a response deadline of September 11, 2026. The contract falls under NAICS code 333120 and is intended to ensure that runway surfaces meet the necessary technical specifications for military aircraft operations.

FA5575 496 Abs Pk

POSTED

DEADLINE

Snowplow Blades

Solicitation # W50S8B-26-Q-A013

Solicitation W50S8B-26-Q-A013 is a request for quotation from the 108th Wing JB MDL, New Jersey Air National Guard, for twenty brand name or equal snowplow replacement parts. Specifically, the requirement is for 4-foot JOMA snowplow blades, part number JM20415, or an equivalent that meets the same physical and performance characteristics. These parts must be compatible with the JOMA mounting system and fit a 20-foot Wausau Blue Max BMP High Speed Airport Runway Snowplow, Model BMP 2050HW. The contract will be awarded as a firm-fixed-price agreement to the lowest priced, responsive, and responsible offeror. This procurement is a total small business set-aside under NAICS code 333120 for Construction Machinery Manufacturing. Interested vendors must submit quotes via email to the 108th Contracting Office, including company information, detailed product descriptions, pricing, and delivery requirements. Delivery is expected at McGuire AFB, NJ, approximately 30 days after the award, with an estimated date of September 30, 2026. All requests for information must be submitted by August 28, 2026, and quotes must remain valid for 30 days from the solicitation closing date.

W7NP Uspfo Activity Njang 108

POSTED

DEADLINE

in about 19 hours

Motor Grader, Burns District

Solicitation # 140L4326Q0118

Solicitation 140L4326Q0118 is a firm-fixed-price commercial item supply contract issued by the Department of the Interior's Oregon State Office for the procurement of one motor grader for the BLM Burns District Office. The equipment must be delivered to Hines, Oregon, within 365 days of the contract award. This opportunity is designated as a total small business set-aside under NAICS code 333120. The procurement process is managed by the BLM OR-ST Office Procurement Branch, with Destinee Croom serving as the primary point of contact. Interested parties must submit their responses by the deadline of September 7, 2026. The contract includes detailed minimum specifications in the statement of work and adheres to standard FAR clause incorporations for commercial item acquisitions.

Oregon State Office

POSTED

DEADLINE

19th ENG CRANE RENTAL

Solicitation # PANMCC26P0000051356

The 419th CSB and 19th Engineer Battalion are seeking certified commercial vendors to provide heavy mobile crane rental, a 36K forklift, and professional rigging services at Fort Knox, Kentucky. The primary objective is to support the restationing and upload of approximately 237 pieces of heavy tactical engineer assets, including bridge structures and shipping containers. Requirements include a hydraulic mobile crane with a minimum lifting capacity of 225 tons, along with a certified crane operator and rigger capable of maneuvering loads up to 24,000 lbs. The operational schedule is a split-week window spanning September 21 to September 30, 2026, totaling an estimated 96 operational hours. Notably, the government will not pay standby or rental rates for the non-operational weekend of September 26-27. Interested firms must submit a capability statement by September 1, 2026, detailing their corporate information, technical assets, mobilization plans, and past performance. This is a sources sought notice for planning purposes and does not constitute a formal solicitation.

0419 Aq Hq Contracting Supply

POSTED

DEADLINE

26-OP-028 Gimcheon Wheeled Excavator with Grapple and Thumb Bucket

Solicitation # SP4510-26-Q-1026

Solicitation SP4510-26-Q-1026 is a full and open procurement for a single award to provide a wheeled excavator equipped with grapple and thumb attachments for DLA Disposition Services in Gimcheon, Gyeongbuk. The contract is being solicited as a commercial item under FAR Parts 12 and 13, with the award based on the Lowest-Price Technically Acceptable basis. Interested offerors must submit their quotes via email to the designated Contracting Officer by September 11, 2026, at 3:00 p.m. Eastern Standard Time. Submissions must include a completed price schedule, a technical certification form with detailed equipment specifications, the manufacturer's cut sheet, and the country of origin for the equipment. Offerors are also required to provide a valid CAGE code and Unique Entity Identifier, ensuring all representations and certifications are current in SAM.gov. The successful contractor will be responsible for all delivery coordination and must comply with all applicable federal, state, and local laws, as well as installation policies.

DLA Disposition Services - Ebs

POSTED

DEADLINE

36 LRS Compact Track Loader Attachment Racking System (Brand Name: Bucket Bunker) (GUAM)

Solicitation # FA524026Q0035

The 36th Contracting Squadron of the Department of Defense is soliciting bids for the procurement of brand name Bucket Bunker Compact Loader Attachment Racking Systems to be utilized in Yigo, Guam. This opportunity, identified by solicitation number FA524026Q0035, is designated as a total small business set-aside under NAICS code 333120. Interested parties must submit all inquiries to the designated points of contact by September 3, 2026, at 10:00 AM Chamorro Standard Time. The final deadline for the submission of responses is September 10, 2026, at 3:00 AM.

FA5240 36 Cons Lgc

POSTED

DEADLINE

Class D Duty Cycle Crane

Solicitation # W912EQ26QA042

The U.S. Army Corps of Engineers, Memphis District, is soliciting quotes for a single Class D rated duty cycle crawler crane under solicitation number W912EQ26QA042, which is open to full and open competition with no set-aside restrictions. The procurement is governed by the North American Industry Classification System (NAICS) code 333120, and all vendors must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment; this registration must include the correct NAICS code. Quotes must be submitted via email by the deadline of August 28, 2026, at 4:00 p.m., and must clearly reference the solicitation number. Responses should be addressed to Alexandria Duckett or Kirk A. Middleton at their respective email addresses or phone numbers, with the vendor solely responsible for ensuring timely receipt. Failure to comply with SAM registration or submission requirements will disqualify an offeror from award consideration. The place of performance and specific delivery details are not specified in the provided data, and the point of contact for inquiries is Kirk Middleton.

W07V Endist Memphis

POSTED

DEADLINE

in about 19 hours

More opportunities from National Aeronautics And Space Administration → NASA Stennis Space Center

Same awarding agency

Technical Documentation and Compliance ReportingThe contract requires the compilation, formatting, and submission of technical documentation including test reports, material certifications, and cleaning records, all aligned with NASA’s stringent compliance standards. The work is centered on ensuring accuracy and uniformity in technical records to support mission-critical operations, with deliverables must meet NASA Stennis Space Center’s quality and procedural requirements. This subcontract is tied to performance at Oakville and falls under the NAICS code 541611 for scientific and technical consulting services. It was posted on July 6, 2026, and is part of NASA’s broader efforts to maintain documented compliance across its supply chain. While specific performance metrics or timelines are not detailed here, adherence to NASA’s technical and regulatory frameworks is central to the contract’s execution, requiring specialized knowledge of aerospace documentation protocols and quality assurance practices.

Administrative Management and General Management Consulting Services

POSTED

about 2 months ago

DEADLINE

Specialized Packaging and Preservation for Aerospace ShipmentThe contract requires specialized contamination-controlled and damage-proof packaging for fully assembled aerospace valves, ensuring they remain untouched and intact during transit from Oakville, Ontario, to Mississippi. The packaging solution must meet rigorous standards to prevent environmental contamination and physical damage, critical for maintaining the performance and integrity of sensitive aerospace components. All packaging materials and procedures must comply with aerospace industry specifications to guarantee reliability under extreme conditions during transport and handling. This subcontract is linked to NASA Stennis Space Center under NAICS code 561910, indicating it falls under support services for logistics and packaging. Despite the lack of specific details on the awarding office or point of contact, the place of performance is clearly identified as Oakville, Ontario, with delivery destination in Mississippi. The solicitation was posted in July 2026, suggesting the requirement is for future execution, and the nature of the work demands precise coordination between packaging engineers, logistics providers, and quality assurance teams to meet exacting aerospace shipment protocols.

Packaging and Labeling Services

POSTED

about 2 months ago

DEADLINE

Cryogenic Functional Testing and CertificationThe contract requires comprehensive performance testing of assembled valves under simulated cryogenic conditions to validate their operational integrity at a pressure of 8,500 psig and compatibility with liquid oxygen. All testing must replicate the extreme environmental conditions expected in spaceflight systems to ensure reliability and safety during actual use. The work involves rigorous functional evaluations to confirm valve performance under thermal stress, high-pressure flow, and oxidizer exposure, with strict documentation of results to meet certification standards. The contract is classified as a subcontract under NAICS code 541380 and is managed by NASA Stennis Space Center on behalf of the National Aeronautics and Space Administration. Performance of the work is designated to occur in Oakville, and the solicitation was posted on July 6, 2026. The testing outcomes will serve as critical certification evidence for use in propulsion or life support systems where failure is not an option, and all materials, procedures, and testing protocols must align with NASA’s stringent requirements for cryogenic fluid handling and mission-critical hardware.

Testing Laboratories and Services

POSTED

about 2 months ago

DEADLINE

LOX Cleaning and Passivation ServicesThe contract pertains to specialized cleaning, passivation, and verification services for valves to ensure compatibility with liquid oxygen and to mitigate risks of contamination or combustion. The work involves meticulous procedures to eliminate particulates, oils, and other reactive residues that could compromise safety in high-oxygen environments, following stringent industry and government standards for LOX systems. All processes must be documented and validated to confirm that components meet required purity levels and are free from potential ignition sources. The services are being performed under a subcontract arrangement for NASA Stennis Space Center, with the place of performance located in Oakville. The North American Industry Classification System code 332999 indicates the work falls under other miscellaneous fabricated metal product manufacturing, reflecting the precision and custom nature of the valve treatment processes. The contract was posted on July 6, 2026, and is intended to support critical propulsion or life support systems where oxygen compatibility and system integrity are non-negotiable for mission safety and operational reliability.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 months ago

DEADLINE

Cryogenic Valve Fabrication and AssemblyThe contract involves the precision machining and assembly of dual-ball, high-pressure LOX pressure control valves designed for cryogenic service at 8,500 psig, ensuring full compatibility with existing system controls. These valves must meet stringent performance and material standards to operate reliably in extreme low-temperature environments while maintaining leak-tight integrity and consistent pressure regulation under demanding operational conditions. Work is to be performed at the place of performance in Oakville, and the subcontract falls under NAICS code 332913 for machine shop, turned product, and screw machine product manufacturing. The contract is issued by NASA's Stennis Space Center under the National Aeronautics and Space Administration, reflecting its critical role in supporting space propulsion and life support systems. All components must be fabricated and assembled to exacting quality control protocols, with no room for variance in dimensional tolerances, surface finishes, or material composition to ensure mission safety and system interoperability.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 2 months ago

DEADLINE

Fuel System Installation (Piping and Day-Tanks)The contract involves the installation of fuel piping and day-tanks for two generators, each with a capacity of 1750 kW. This work includes making all necessary connections to the main fuel supply and integrating safety systems to ensure reliable and secure fuel delivery. The project is classified under NAICS code 238220, which covers plumbing, heating, and air-conditioning contractors. Issued by the National Aeronautics and Space Administration (NASA) at the Stennis Space Center, the subcontract is focused on enhancing the facility's fuel system infrastructure to support critical power generation equipment. The installation will take place at the Stennis Space Center, with emphasis on compliance with safety standards and operational efficiency. Although no specific set-aside type is indicated, the contract is intended to secure specialized services in fuel system installation for this government facility.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Civil/Structural Support ConstructionThe contract involves the construction of elevated platforms and structural foundations designed to support two new 1750kW generators. The work includes steel framing and concrete tasks necessary to ensure the generators are securely and safely installed. This subcontract, categorized under civil and structural support construction, will be performed at the NASA Stennis Space Center in Mississippi, with a focus on providing the foundational infrastructure for these high-capacity power units. The solicitation was posted on May 19, 2026, and pertains to NAICS code 238110, which covers general concrete contractors and structural related construction. While there is no specified set-aside type or detailed information regarding the contracting organization's nature, the project is directly overseen by the National Aeronautics and Space Administration, ensuring compliance with federal standards and requirements typical of government infrastructure projects. The location and scope indicate that the subcontractor will play a critical role in enhancing the power support capacity at a key NASA facility.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Energy Management and Control System (EMCS) IntegrationThis contract involves the integration of new generator systems with the existing Energy Management and Control System (EMCS) at NASA's Stennis Space Center. The primary objective is to enable automated monitoring, control, and synchronization of these generators with the power grid during power events, ensuring a seamless and efficient power management process. The work is categorized as a subcontract under NAICS code 238220, which pertains to electrical contractors and other wiring installation contractors. The scope emphasizes enhancing the facility’s resilience by automating the interaction between generator systems and the EMCS, thereby improving operational reliability and response during power disruptions. The contract was posted on May 19, 2026, and is managed by the National Aeronautics and Space Administration. Performance of the work will take place at Stennis Space Center, Mississippi, with the goal to support critical infrastructure through advanced energy management solutions.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

High-Voltage Electrical System IntegrationThe contract involves the integration of new 1750kW generators into the existing 15kV utility grid at NASA's Stennis Space Center. This work includes the installation of breakers, step-up transformers, switchgear, and GOAB switches, all of which must be carefully coordinated with the grid operations managed by MPC to ensure seamless and safe integration. The scope emphasizes the high-voltage electrical system upgrades necessary to support enhanced power capacity and reliability. Issued as a subcontract under NAICS code 238210, the project requires specialized electrical installation services focused on high-voltage systems. The location of performance is at the Stennis Space Center, zip code 39529. The contract was posted on May 19, 2026, by NASA, reflecting the agency’s ongoing commitment to infrastructure improvements that support its operational capabilities. This initiative is critical for maintaining stable utility power essential to the center’s technological and research activities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE