This Combined Synopsis/Solicitation opportunity from Department Of Transportation was posted on September 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NM FS SNTFE310 263(1) Gallinas Canyon Road

Closed

6982AF26Q000019Federal

Submission Closed09/03/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain

Solicitation # RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain

The New Hampshire Department of Natural and Cultural Resources is seeking a contractor to provide non-destructive electromagnetic wire rope testing and inspection services for the Cannon Mountain Aerial Tramway and Peabody Express for the 2027-2029 period. The scope of work requires the contractor to provide all labor, equipment, and resources to test four aerial tramway track cables and the complete length of the Peabody Express detachable lift haul rope. Key deliverables include detailed written inspection reports documenting test results, detected deterioration, wire breaks, loss of metallic area, and recommendations for corrective actions or follow-up monitoring. The contract is a fixed-budget arrangement with the award based on the lowest cost. Bids must be submitted by November 16, 2026, at 2:00 PM EST. Eligible vendors must be registered with the NH Bureau of Purchase and Property and, if applicable, be in good standing with the NH Secretary of State. Required insurance includes comprehensive general liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, as well as workers compensation. Services are to be performed between 7:00 A.M. and 4:00 P.M., with the state requiring ten days advance notice for scheduling. Invoices are submitted monthly and paid within thirty days upon the state's satisfaction and acceptance of the work.

Department Of Natural & Cultural Resources

POSTED

DEADLINE

NDT and Quality Inspection ServicesThis subcontract for NDT and Quality Inspection Services supports prime contractors on DLA Aviation fuel valve projects for the Department of Defense. The scope of work involves performing critical quality assurance and non-destructive testing, specifically utilizing Fluorescent Penetrant Inspection, Magnetic Particle Inspection, and hydrostatic pressure testing. All work must be conducted using calibrated equipment by certified NDT technicians to ensure technical compliance. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance. This opportunity is categorized under NAICS code 541380 and is associated with DLA Aviation in Oklahoma City. The response deadline for this requirement is November 21, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Specialized Inspection and Testing ServicesThe Specialized Inspection and Testing Services subcontract involves providing independent quality assurance and non-destructive testing for prime contractors on Department of the Navy projects. The scope of work focuses on conducting visual inspections of weld joints according to MIL-STD-2035 and performing dimensional inspections per DI-MDTI-808089B utilizing precision measuring instruments and CMM. Qualified providers must hold Certified Weld Inspector credentials to deliver essential documentation, including conformance inspections, final assembly dimensional reports, and weld joint visual inspection reports. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for December 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Calibration and Certification Services for Pneumatic Test SetThis subcontract for the Department of Defense involves providing calibration and certification services for pneumatic test sets supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for the final testing, inspection, and precision calibration of gauges, valves, and sensors. All work must be performed using NIST-traceable standards and precision pressure testing equipment in strict accordance with ANSI/NCSL Z540.3 or ISO-10012-1 standards. The primary deliverables for this engagement include the provision of detailed calibration certificates and a certified Ready For Issue inspection report. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.

POSTED

DEADLINE

NDT and Mechanical Testing for Special Emphasis FastenersThis subcontract involves providing non-destructive and destructive mechanical testing for special emphasis fasteners on behalf of prime contractors for Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing liquid penetrant inspections and wedge tensile testing in strict accordance with T9074 AS-GIB-010/271, MIL-DTL-1222, and ASTM-F606 standards. To qualify, the contractor must maintain ISO/IEC 17025 accreditation and utilize ISO 10012 calibrated tools. Deliverables for this engagement consist of certified test reports and certification data submitted via DD Form 1423. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CSI Certification and Data Reporting ServicesThis subcontract for CSI Certification and Data Reporting Services involves providing specialized inspection and certification for prime contractors working on US Navy Critical Safety Item projects. The scope of work requires the verification of critical characteristics according to the Technical Data Package and the application of DI-MISC-80678 data requirements. The selected provider is responsible for preparing Certification and Data Reports and submitting all necessary information through the Electronic Contractor Data Submission system using PKI Digital Certificates. Final deliverables include a validated Certificate of Compliance and a completed Certified Data Report. This effort is managed under the Department of Defense via the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

First Article Testing and Validation (Nuclear C Seal)This subcontract for the Department of Defense and Navsup Weapon Systems Support Mech involves the first article testing and validation of nuclear C seals. The selected contractor will perform both destructive and non-destructive testing to verify that material properties and dimensional accuracy align with TDP Version 002 and IRPOD requirements. All work must be conducted using certified NDE tools and adhere strictly to MIL-I-45208 quality standards. The primary objective of the contract is to produce certified test reports and supporting data necessary for the submission of DD Form 1423. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Countermeasure Receiver RFI Testing and CertificationThis subcontract for Navsup Weapon Systems Support involves providing final performance testing and inspection services for prime contractors. The scope of work focuses on the RFI certification of Countermeasure Receivers, utilizing calibrated measurement tools and specialized test tooling. Additionally, the contractor is responsible for conducting dimensional readings in accordance with 46 CFR 51 and creating sequential process diagrams. To be eligible, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary deliverables for this engagement are the RFI Certification and a Final Inspection Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

NDT and Hydrostatic Testing Services for Level I ComponentsThis subcontract involves providing independent non-destructive testing and hydrostatic pressure testing for shipboard valve projects supporting the Department of Defense via NAVSUP Weapon Systems Support Mechanicsburg. The selected provider will perform ultrasonic, X-ray, or dye penetrant inspections along with pressure chamber testing to certify Special Emphasis Level I integrity. Key deliverables include the provision of certified test reports and formal compliance certifications. To be eligible, the contractor must hold ISO/IEC 17025 and ISO 10012 accreditations and maintain a Confidential security clearance. The opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

POSTED

DEADLINE

Aviation Component Testing and Inspection ServicesThe Aviation Component Testing and Inspection Services subcontract involves providing specialized testing and inspection for prime contractors on NAVSUP WSS aviation projects. The primary objective is to certify assemblies as Ready for Issue through rigorous fatigue, crack, and wear inspections. These tasks are performed using specialized aviation test benches and non-destructive testing equipment, including X-ray, ultrasonic, and magnetic particle inspection. To qualify, service providers must adhere to DoD-approved inspection standards or maintain NADCAP certification. The successful contractor is responsible for delivering comprehensive inspection and test reports along with the final RFI certification. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Solicitation 6982AF26Q000019, issued by the Federal Highway Administration Central Federal Lands Highway Division, seeks geotechnical drilling services for the reconstruction of Gallinas Canyon Road in San Miguel County, New Mexico. This project involves a six-mile stretch of FR 263 starting at the Burro Basin Trailhead and proceeding east to the intersection of FR 156. The primary objective is to gather subsurface data through nineteen planned boreholes, categorized into corridor characterization and bridge investigation, to support the 30 percent project design and cost estimate for roadway resurfacing, widening, realignment, rock cuts, and bridge replacements. This combined contract is a total small business set-aside under NAICS code 541380. The procurement follows a lowest price technically acceptable award process, with quotes due by September 3, 2026. The scope of work is managed by the Department of Transportation's Central Federal Lands Division in Lakewood, Colorado, in partnership with the Forest Service to improve the existing narrow and winding road alignment.

General Info

Geotechnical borings for Gallinas Canyon Road reconstruction in New Mexico, due September 3, 2026.

Agency

Department Of Transportation → 6982AF Central Federal Lands Divisi

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NM, 87731, USA

Set-Aside

SBA

Documents

6982AF26Q000019 RFQ - NM FS SNTFE310 263(1) Gallinas Canyon Road

61 pages · rfq

High

A001 Amendment to Solicitation 6982AF26Q000019

12 pages · amendment

High

6982AF26Q000019 Gallinas Canyon Road Q&A

1 page · q-and-a

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

3 updates

PhaseClosed

PostedAug 18

Combined Synopsis

Notice updatedAug 27

Notice details unchanged. Attachments may have changed.

Notice updatedAug 27

Notice details unchanged. Attachments may have changed.

Response DeadlineSep 3

Deadline has passed

Notice updatedSep 10

Notice details unchanged. Attachments may have changed.

Submission Closed

09/03/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Transportation → 6982AF Central Federal Lands Divisi

Contacts2 people available

OfficeLAKEWOOD, CO, 80228, USA

Organization / AgencyDepartment Of Transportation → 6982AF Central Federal Lands Divisi

Office AddressLAKEWOOD, CO, 80228, USA

Contacts

Eric Grosskreuz

contact@example.gov

Kelly Palmer

contact@example.gov

Full Description

This RFQ is for geotechnical borings associated with the design and construction of Gallinas Canyon Road. The geotechnical investigation will gather subsurface data to inform the 30% project design and cost estimate. The program includes nineteen (19) planned boreholes. These boreholes fall into two categories: corridor characterization and bridge investigation.

Project Locations and Descriptions: The Federal Highway Administration (FHWA), Central Federal Lands Highway Division, and the Forest Service are partnering to reconstruct a portion of FR 263, Gallinas Canyon Road. This reconstruction project includes roadway resurfacing, widening, and realignment. The realignment incorporates options for several bridge replacements and rock cuts.

Gallinas Canyon lies within San Miguel County, NM. The project alignment begins at Burro Basin Trailhead and proceeds East for approximately 6 miles to the intersection of FR 263 and FR 156. The existing alignment consists of a narrow, winding road that crosses 15 bridges.