Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

NOTICE OF INTENT TO SOLE SOURCE: Two (2) Industrex HP-1+ digital x-ray scanning systems & Six (6) Industrex flex HR AP digital imaging plates.

Active

W911QX26QA140Federal

Response Deadline08/10/2026, 03:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, intends to solely source two Industrex HPX-1+ digital x-ray scanning systems and six Industrex flex HR AP digital imaging plates under solicitation W911QX26QA140. The requirement is classified under NAICS code 334517 and is not subject to any set-aside provisions, indicating open competition limited to a single vendor due to unique technical specifications or proprietary technology. The contract will be performed at Aberdeen Proving Ground in Maryland, with all equipment delivered to meet operational needs at this military installation. The solicitation was posted on August 3, 2026, and responses must be submitted by August 10, 2026, at 3:30 p.m. Eastern Time. Primary point of contact for inquiries is William Nuamah, reachable via phone at 520-672-9609 or email at william.nuamah.civ@army.mil, and all correspondence should be directed through this official channel.

General Info

Sole-source contract for two HPX-1+ x-ray systems and six imaging plates at Aberdeen Proving Ground, Maryland.

Agency

Department Of Defense → W6QK Acc-Apg AdelphiView Agency

NAICS

334517 - Irradiation Apparatus ManufacturingView NAICS

Place of Performance

Aberdeen Proving Ground, MD, 21005, USA

Set-Aside

NONE

Documents

(2)

Combination+Synopsis-Solicitation+for+Commercial+Purchases+%28Under+SAT%29.docx+2.docx

DOCX

Adelphi+Local+Instructions+Provisions+and+Clauses.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 3

Solicitation

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 03:30:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Adelphi

Contacts1 person available

OfficeADELPHI, MD, 20783-1197, USA

Organization / Agency

Department Of Defense → W6QK Acc-Apg Adelphi

View Agency Profile

Office AddressADELPHI, MD, 20783-1197, USA

Contacts

William Nuamah

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

The Government requires two (2) Industrex HPX-1+ digital x-ray scanning systems, as well as six (6) Industrex flex HR AP digital imaging plates

Similar Contracts

Same NAICS industry code

65--SPECT/CT Imaging Device

Solicitation # 140D0426Q0778

The U.S. Department of the Interior, through the IBC ACQ SVCs Directorate, has issued a special notice for the acquisition of a SPECT/CT Imaging Device under solicitation number 140D0426Q0778. The opportunity is posted with a response deadline of August 6, 2026, at 2:00 PM Eastern Time, and corresponds to NAICS code 334517, which classifies the procurement under Medical Equipment and Supplies Manufacturing. The contract is being managed from the agency’s office located in Herndon, Virginia, with no specific place of performance designated beyond the federal location. The primary point of contact for inquiries is Patrick Jackson, reachable via email at patrick_jackson@ibc.doi.gov, though the provided phone number is listed as inactive. This procurement is not subject to any small business set-aside or similar socioeconomic restrictions, and interested parties must submit responses through the designated federal procurement platform linked in the notice.

Ibc Acq Svcs Directorate (00004)

POSTED

about 16 hours ago

DEADLINE

6525--CFM SPECIAL EQ Consolidation

Solicitation # 36A79726Q0018

The Department of Veterans Affairs, through its National Acquisition Center under the Nac High Technology Orders contract line, is seeking qualified vendors to consolidate the acquisition of specialized medical equipment under solicitation 36A79726Q0018 titled 6525--CFM SPECIAL EQ Consolidation. This procurement, classified under NAICS code 334517, targets the supply of high-tech equipment including XR CT and XR RAD systems across multiple VA VISNs and medical centers, with specific line items identified for Nashville TN, Topeka KS, and Walla Walla WA. Participation is restricted exclusively to companies holding an active contract for these equipment types with either the VA National Acquisition Center’s High Tech Medical Equipment Division or the Defense Logistics Agency Troop Support, provided the VA has ordering authority under the latter. All proposals must be submitted by August 14, 2026, at 11:59 PM Central Time, with delivery order awards expected to be executed by September 25, 2026. Technical evaluations will be conducted by the requesting VA stations, and contracting officers at the National Acquisition Center in Hines, IL, will review those evaluations to ensure award adequacy. The selection will be based on best value, with vendor presentations permitted solely to clarify equipment features as quoted; no discussion of pricing or unquoted equipment or features is allowed. Communication during the solicitation phase must be directed through designated NAC coordinators, Hermann Degbegni and Michael Kuchyak, with all interactions closely monitored to ensure fairness and confidentiality, including strict control over evaluation panel information. Questions must be submitted via the QA template provided in the Schedule of Line Items document, and no direct inquiries about selection status are permitted.

Nac High Technology Orders (36A797)

POSTED

DEADLINE

High-Precision Diagnostic Equipment Parts SupplyThe contract entails the supply of authentic, JEOL-certified replacement and maintenance parts for the JSM-IT300LV scanning electron microscope, covering critical components such as electron optics, vacuum seals, detectors, and control boards, ensuring continued operational integrity and performance fidelity. All parts must meet stringent quality and authenticity standards as validated by JEOL, with delivery and installation aligned to support uninterrupted use in high-precision diagnostic applications. Performance is required at a location with ZIP code 73145, under the oversight of the Department of Defense’s FA8126 Afsc Pzimb office, and the contract is classified as a subcontract within the NAICS code 334517 for other electronic instrument manufacturing. The posting date indicates the opportunity was issued in 2026, and though no solicitation number is provided, the official listing can be accessed through the SAM.gov platform via the specified URI. The agreement emphasizes compliance with certified OEM specifications to maintain system calibration, safety, and resolution standards critical to defense-related research and analysis.

FA8126 Afsc Pzimb

POSTED

DEADLINE

6525--GNV X-RAY SHIELD ARM COMBO 36C24826Q0999

Solicitation # 36C24826Q0999

The Department of Veterans Affairs is seeking a vendor to remove and install a new ceiling-mounted extension/spring arm system at the Malcolm Randall VA Medical Center in Gainesville, Florida. The system must include a high-quality examination or surgical light and an integrated radiation protection shield, designed for use in imaging services. This procurement is a Total Small Business Set-Aside under the SBA program, exclusively open to small businesses, with the North American Industry Classification System code 334517. The solicitation, identified as 36C24826Q0999, was posted on July 28, 2026, and responses are due by August 4, 2026, at 8:30 p.m. Eastern Time. The contracting office is the 248-NETWORK Contract Office 8 located in Tampa, Florida, with Jeremy C Parrish serving as the primary point of contact for inquiries. The award will be managed under the Office of Acquisition, Logistics, and Construction, and the vendor is expected to handle full installation and removal as part of the scope of work.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

in about 17 hours

Novo Irradiation equipment in support of Oak Ridge National Laboratory.

Solicitation # PR488234

The Nuclear Nonproliferation Division at Oak Ridge National Laboratory is seeking to procure Novo irradiation equipment or a qualified domestic equivalent under solicitation PR488234, with responses due by August 4, 2026. The equipment must be delivered onsite to ORNL in Oak Ridge, Tennessee, under FOB Origin terms, with transportation costs reimbursable under Contract DE-AC05-00OR22725. All deliveries must be made by a U.S. citizen, and performance is subject to a period exceeding 120 days, triggering compliance with federal labor, safety, and reporting requirements including FAR 52.222-54 and DOE Order O 221.1B. Offerors must comply with extensive security protocols, including DOE access authorization for personnel, mandatory fingerprinting, urine analysis, background investigations covering credit, education, employment, and local law enforcement checks, and random drug testing for cleared individuals. All subcontractors must flow down security, PII protection, and compliance clauses regardless of tier. Electrical equipment must bear NRTL certification, and hazardous materials must meet DOE O 460.1D packaging and transportation standards. Export controls under ITAR and EAR apply, and confidentiality obligations extend to all government and third-party proprietary information. The contract requires a UEI and SAM.gov registration, and while no contract value is specified, it includes clauses covering anti-kickback provisions, contractor ethics, patent rights for classified matter, progress payments, and limitations on pass-through charges. Insurance requirements include a minimum $2 million commercial general liability policy, and all personnel must be trained in OSHA 10 CFR 851.23 hazardous energy control and NFPA 70E electrical safety. Offers must include Attachment C – Bill of Materials and be submitted electronically via SAM.gov or a designated DOE portal.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

in about 18 hours

Beamscan Water Phantom System Supply and DeliveryThe contract seeks the supply, delivery, and installation of a Beamscan Water Phantom System or an equivalent device to support radiation therapy beam measurement and quality assurance within the clinical oncology department at the Oklahoma City VA Medical Center. The system is critical for ensuring the accuracy and safety of radiation treatments, and the equipment must meet the technical and performance standards required for clinical use in a VA healthcare setting. Delivery and setup must be completed in accordance with regulatory and operational protocols to enable immediate integration into existing radiation oncology workflows. The opportunity is structured as a subcontract under the Department of Veterans Affairs, specifically managed by Network Contract Office 19, with a response deadline of August 7, 2026. The NAICS code 334517 indicates that the procurement is for medical equipment manufacturing, and the place of performance is firmly set at the Oklahoma City VA Medical Center with ZIP code 73104. The contract does not specify a set-aside classification, and there is no designated point of contact provided, requiring potential vendors to review the SAM.gov listing for additional submission details and compliance requirements.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Ruggedized Portable X-Ray System IntegrationThe contract requires the full integration, testing, and delivery of 50 ruggedized portable X-ray systems, encompassing all necessary hardware, software, and accessories to ensure operational readiness in demanding field environments. The systems must meet stringent compliance standards, including verification of regulatory and safety requirements, to ensure suitability for federal use. Performance is expected to be completed in full compliance with Small Business Administration set-aside guidelines, designated as a Total Small Business Set-Aside under FAR 19.5, ensuring eligibility and participation by qualified small businesses. The North American Industry Classification System code 334517 applies, indicating the work falls within the manufacture of medical, dental, and hospital equipment. The solicitation was posted on July 24, 2026, with a firm response deadline of August 24, 2026, at 4:00 PM. The contract is classified as a subcontract and is associated with the FBI at Redstone Arsenal under the Department of Justice. While specific delivery location details are not fully defined, the place of performance is listed with a ZIP code of 36640, suggesting the systems must be deployed to and function within that geographical area. All components and processes must be delivered as a fully integrated solution, validated through rigorous testing protocols, with no partial or incremental deliveries acceptable under the terms of this agreement.

FBI - Redstone Arsenal

POSTED

DEADLINE

6525--Water Phantom System

Solicitation # 36C25926Q0680

The Department of Veterans Affairs through the Network Contract Office 19 is seeking information from industry regarding the potential procurement of a Beamscan Water Phantom System or an equivalent system to support oncology services at the Oklahoma City Veterans Affairs Health Care System. This sources sought notice is not a solicitation and does not obligate the government to award a contract; responses are strictly for planning purposes and cannot form a binding agreement. Interested parties must submit responses no later than 3:00 PM MST on Friday, August 7th, 2026, via email to Peyton Wilkerson at peyton.wilkerson1@va.gov, with a maximum submission length of eight pages including the cover letter. All proprietary information must be clearly marked, and responders are responsible for all costs associated with their submissions. The anticipated NAICS code for this effort is 334517 Irradiation Apparatus Manufacturing with a Small Business size standard of 1,200 employees, though vendors are encouraged to suggest alternative codes if they believe another better reflects the work described in the draft Statement of Work and Salient Characteristics List. Responses must include the vendor name, SAM UEI number, manufacturer name and address, estimated delivery time, SAC FSS contract number if applicable, point of contact details, and a detailed description of the proposed system’s capabilities aligned with the VA’s requirements. The system must meet or exceed the performance specifications of the Beamscan Water Phantom System to ensure accurate, high-quality radiation therapy delivery for veterans.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Portable X-Ray System

Solicitation # 15F06726Q000602

The government is seeking a one-time, firm-fixed price delivery order for commercial portable X-Ray systems to support the FBI’s Critical Incident Response Group, with the solicitation designated as a total small business set-aside under NAICS code 334517, which carries a size standard of 1,000 employees. Only small business concerns that are authorized resellers of the specified X-Ray systems are eligible to submit quotes; any offer from a business that does not meet both criteria will be disqualified. The procurement is being managed by the FBI at Redstone Arsenal, Alabama, and all submissions must be sent electronically to Emily York at eyork@fbi.gov no later than Monday, August 24th, 2026, at 11:00 AM CT. Quotes must remain valid for 90 calendar days following submission and must not be submitted via telephone, fax, or any other non-electronic method. Questions regarding the solicitation must be directed to the same contact no later than Friday, August 7th, 2026, at 11:00 AM CT, and the government retains the right to terminate the solicitation at any time during its validity period.

FBI - Redstone Arsenal

POSTED

DEADLINE

Handheld X-Ray Imager Supply and DeliveryThe contract entails the supply and delivery of a handheld X-ray imager system designed for non-invasive inspection purposes at Fort Smith, Arkansas, with all required components, accessories, and battery-powered operation included. The system must be fully functional for field use, ensuring reliable imaging without reliance on external power sources. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 334517, which corresponds to the manufacturing of electromedical and electrotherapeutic apparatus. Responses are due by August 6, 2026, and the solicitation was posted on July 23, 2026, with performance centered at the designated location in Fort Smith. The contracting agency is the Department of Defense, specifically under FA4419 97 Conf Cc, and while no specific point of contact is listed, all deliverables must meet the technical and operational requirements for use in a military or defense context. The place of performance is firmly established in Fort Smith with a zip code of 72903, indicating the intended use location for the equipment. The contract does not specify a solicitation number or detailed office address, but its online listing is accessible through the SAM.gov portal. The procurement emphasizes small business participation and ensures that the delivered system is self-sustaining, portable, and suitable for on-site, non-destructive inspection tasks as required by the defense operation at the site.

FA4419 97 Conf Cc

POSTED

DEADLINE

Handheld X-Ray Imagers

Solicitation # FA441926Q0043

The solicitation seeks proposals for Handheld X-Ray Imagers, portable battery-operated scanning devices designed to inspect suspicious objects, vehicles, and structures non-invasively. This is a total small business set-aside under NAICS code 334517, exclusively available to small businesses as defined by the SBA. Proposals must be submitted by August 6, 2026, and the opportunity was posted on July 23, 2026, under solicitation number FA441926Q0043. The contracting office is located at Altus Air Force Base, Oklahoma, with performance expected in Fort Smith, Arkansas. Primary and secondary points of contact are listed for inquiries, including email addresses and phone numbers for Andres Lugo and Isaiah Jones. Funds are not currently available for this requirement, and no award will be made until such funding is appropriated. The government retains the right to cancel the solicitation at any time, before or after the submission deadline, without any obligation to reimburse offerors for incurred costs. Interested parties should be aware that participation does not guarantee funding or a contract award, and all submissions are made at the offeror’s own risk.

FA4419 97 Conf Cc

POSTED

DEADLINE

PR22102 47419-262823 Postal and Oversized Postal Small Scale Imaging Systems

Solicitation # WS5780935316

The Government of Canada, through the Department of Public Works and Government Services, is soliciting proposals for Postal and Oversized Postal Small Scale Imaging Systems under solicitation number WS5780935316, which was posted on July 22, 2026, with a response deadline of August 27, 2026. This Request for Proposal is restricted to prequalified respondents and falls under the ITQ E60PV-25XRAY framework for Low Energy X-ray Systems, targeting the acquisition of imaging equipment designed for secure screening of mail and oversized postal items. The North American Industry Classification System code is 334517, indicating the focus on manufacturing and supply of specialized X-ray imaging equipment. Proposals must be submitted by the deadline to the Contracting Authority, Alexandra Lajoie, via the provided email address, and performance of the contract will be carried out across Canada, with no specific city or location designated beyond the national scope. While no set-aside provisions are specified, the solicitation is open exclusively to entities already prequalified under the referenced ITQ program, ensuring only vetted suppliers may respond. The opportunity is hosted on the Canada Buys portal, and all technical specifications, evaluation criteria, and compliance requirements are detailed in the associated documentation accessible through the provided link.

Department of Public Works and Government Services

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg Adelphi

Same awarding agency

NOTICE OF INTENT TO SOLE SOURCE: One (1) microwave induced, nitrogen supported plasma based optical emission instrument.

Solicitation # W911QX26QA164

The U.S. Department of Defense, through the office of W6QK Acc-Apg Adelphi in Adelphi, Maryland, has issued a notice of intent to sole source the procurement of one microwave induced, nitrogen supported plasma based optical emission instrument. The solicitation number is W911QX26QA164, with a posted date of August 3, 2026, and a response deadline of August 10, 2026, at 3:30 p.m. ET. This acquisition falls under NAICS code 334516, indicating it is for laboratory analytical instrument manufacturing, and no set aside is being used, meaning the contract is open to any qualified vendor without preference for small or specialized businesses. The instrument will be delivered and performed at the Adelphi, Maryland location, with William Nuamah serving as the primary point of contact for inquiries, reachable via email or phone. The contract type is combined, suggesting it may include elements of both solicitation and award actions, and the intent to sole source implies a unique or proprietary nature of the instrument that limits qualified suppliers.

Analytical Laboratory Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

On-Site Installation & Technical Integration SupportThe contract requires on-site implementation of the VHFLI system at ARL’s facility in Adelphi, Maryland, encompassing full installation, precise calibration, and seamless integration with existing experimental platforms. Technical personnel must ensure compatibility and performance validation under operational conditions, with a strong emphasis on achieving system functionality aligned with experimental requirements. This effort includes comprehensive training for ARL staff on system operation, maintenance, and data interpretation, followed by rigorous verification to confirm successful integration and readiness for routine use. The work is classified as a subcontract under NAICS code 541715, with a submission deadline of August 14, 2026, and is administered by the Department of Defense through the W6QK Acc-Apg Adelphi office. All activities must occur at the designated performance location in Adelphi, and the contractor is expected to deliver not only hardware and software integration but also documented operational verification and trained personnel capable of sustaining the system independently post-handover.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

International Equipment Logistics & Delivery CoordinationThe contract pertains to the management of international shipment for the VHFLI bundle from Switzerland to ARL in Adelphi, Maryland, encompassing end-to-end logistics coordination including export compliance, customs clearance, and secure delivery procedures. All activities must adhere to stringent regulatory requirements for international transport of sensitive equipment, ensuring full alignment with U.S. and Swiss export laws, as well as Department of Defense protocols. The contractor is responsible for end-to-end oversight, from origin handling through final secure delivery at the designated federal facility, with emphasis on chain-of-custody integrity and documentation accuracy. The solicitation is classified as a subcontract under NAICS code 488510 for other support activities for air transportation, with a response deadline of August 14, 2026, and a posted date of July 31, 2026. Performance is required at the Adelphi facility with a zip code of 20783, under the purview of the Department of Defense via W6QK Acc-Apg Adelphi. The contract demands specialized expertise in handling international shipments involving defense-related materials, with strict compliance as a non-negotiable condition for award and performance.

Freight Transportation Arrangement

POSTED

DEADLINE

High-Precision Scientific Instrument Supply – VHFLI BundleThe contract involves the supply of a Very High Frequency Lock-in Amplifier (VHFLI) bundle from Zurich Instruments AG, designed to meet the high-precision measurement needs of ARL’s existing scientific infrastructure. The bundle includes all hardware components, proprietary software, and comprehensive documentation necessary for full operational integration, with explicit compatibility requirements ensuring seamless interoperability with current systems in use. The instrument is intended for advanced research and development applications requiring exceptional signal fidelity and stability in high-frequency environments. This is a subcontract under the Department of Defense, managed by the W6QK Acc-Apg Adelphi office, with performance to occur in Adelphi, Maryland, 20783. The solicitation, classified under NAICS code 334310 for instruments and related equipment manufacturing, was posted on July 31, 2026, with responses due by August 14, 2026. No set-aside provisions apply, and the procurement targets a technical solution with strict performance and compatibility standards to support defense-related scientific initiatives.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Very High Frequency Lock-in Amplifier (VHFLI)

Solicitation # W911QX26QA146

The U.S. Department of Defense through the W6QK Acc-Apg Adelphi office is seeking proposals for a Very High Frequency Lock-in Amplifier (VHFLI) under solicitation number W911QX26QA146, which was posted on July 31, 2026 with a response deadline of August 14, 2026 at 7:00 PM Eastern Time. This presolicitation notice is intended to gather industry feedback and does not constitute a formal solicitation, but it outlines the government’s intent to procure a specialized instrument designed for high-frequency signal detection and measurement. The procurement is classified under NAICS code 334310, indicating it pertains to the manufacturing of electronic instrumentation and control equipment. The performance location is designated as Adelphi, Maryland, with a ZIP code of 20783, and all communications must be directed to the primary point of contact, Swati Jain, reachable via email at swati.jain2.civ@army.mil or phone at 520-672-9619. No set-aside status is specified for this opportunity, meaning it is open to all eligible small and large businesses without restrictions based on size, veteran status, or other categories. The contracting activity is based at the Adelphi, Maryland address, and interested parties are encouraged to review the attached presolicitation notice for detailed technical requirements, evaluation criteria, and any anticipated terms or conditions. While the formal solicitation has not yet been released, this presolicitation phase allows vendors to provide input on the government's needs, suggest alternatives, or request clarifications before the official request for proposals is issued. All responses and inquiries should be submitted through the official SAM.gov workspace link provided for this opportunity.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Drone Battery SupplyThe contract calls for the supply of high-performance, compliant batteries specifically designed for the Black Widow drone system under CLIN 0002, ensuring operational readiness and adherence to military standards. The requirement is part of a subcontract under the Department of Defense, managed by the W6QK Acc-Apg Adelphi office, with performance tied to the location at Adelphi, Maryland, 20783. The solicitation was posted on July 30, 2026, with responses due by August 5, 2026, at 3:59 PM, indicating a narrow window for submission and a time-sensitive procurement. The NAICS code 335911 classifies this as a battery manufacturing and supply activity, emphasizing the technical specificity and regulatory compliance required for defense-grade power systems. All provided batteries must meet stringent performance benchmarks to support the drone's mission-critical functions without compromise.

Storage Battery Manufacturing

POSTED

DEADLINE

Shipment and Storage Labeling (MIL-STD-129 Compliance)The contract requires the design and application of durable, MIL-STD-129-compliant labels for the shipping and storage of Black Widow drones, ensuring full adherence to military standards for identification and tracking. Each label must include Item Unique Identification (IUID) data and accurate shipment information to support logistics and inventory management across the Department of Defense supply chain. The work must be performed to exacting specifications that guarantee readability, longevity, and resistance to environmental conditions encountered during transport and storage. This subcontract is issued under NAICS code 323117 and is targeted for performance at Adelphi, Maryland, with a response deadline of August 5, 2026. The contract falls under the purview of the Department of Defense, specifically the W6QK Acc-Apg Adelphi office, and is aligned with federal procurement protocols for defense-related labeling services. All deliverables must meet mandatory military compliance thresholds without exception, and the contractor is expected to ensure complete traceability and audit readiness of all labeled assets.

POSTED

DEADLINE

IUID Data Submission and Registry ReportingThe contract requires the collection of Item Unique Identification (IUID) data from marked drone assets and the timely submission of this information to the Department of Defense IUID Registry through approved systems such as WAWF or MIRRs, ensuring full compliance with federal reporting standards. All data must be accurately gathered, verified, and transmitted in alignment with DoD requirements to maintain traceability and accountability of drone assets throughout their lifecycle. The work is scoped under a subcontract with a NAICS code of 541611, indicating professional, scientific, and technical services related to management consulting, and performance is expected to occur in Adelphi, Maryland, with a zip code of 20783. The opportunity was posted on July 30, 2026, and responses are due by August 5, 2026, at 3:59 p.m., with the contracting activity managed by the Department of Defense under the W6QK Acc-Apg Adelphi office.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

IUID Marking and Data Matrix LabelingThe contract requires the application of permanent, MIL-STD-130-compliant 2D Data Matrix symbols to Black Widow drones and their components, adhering strictly to ISO/IEC 16022 standards for symbol structure and data encoding. All markings must be verified against the requirements outlined in MIL-STD-130 Appendix A to ensure compliance with U.S. Department of Defense identity management protocols. The work is designated as a subcontract under NAICS code 339920, indicating it pertains to other miscellaneous manufacturing, specifically focused on precision marking for defense equipment. The place of performance is identified as Adelphi, Maryland, with a zip code of 20783, and the contracting activity is tied to the Department of Defense through the office at W6QK Acc-Apg Adelphi. The solicitation was posted on July 30, 2026, with a firm deadline for responses set for August 5, 2026, at 3:59 PM Eastern Time, emphasizing a narrow window for qualified vendors to submit proposals.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

FOB Destination Shipping to Aberdeen Proving GroundThe contract requires the transportation of finished rods to the U.S. Army Research Laboratory located at Aberdeen Proving Ground, Maryland, with a zip code of 21005, under F.O.B. Destination terms, meaning the seller assumes all responsibility and costs until the goods are delivered to the specified location. Proof of delivery is mandatory to confirm successful completion of the shipment. The NAICS code 484220 indicates this is a contract for truck transportation of freight, specifically general freight trucking. It is structured as a subcontract and was posted on July 30, 2026, with a response deadline of August 7, 2026, at 3:59 PM ET. The contracting agency is the Department of Defense, specifically under the W6QK Acc-Apg Adelphi organization, with the place of performance clearly defined as Aberdeen Proving Ground.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

IUID Reporting and WAWF SubmissionThe contract requires the submission of Unique Item Identifier (UII) data to the Department of Defense IUID Registry or the Wide Area WorkFlow (WAWF) system for every item delivered under this agreement. Each submission must include the serial number, a detailed description of the item, and associated delivery information to ensure full traceability and compliance with DoD asset management standards. Failure to accurately and timely report this data may result in non-compliance penalties or payment delays. This subcontract, identified under NAICS code 541512, is issued by the Department of Defense through the W6QK Acc-Apg Adelphi office and applies to deliveries performed at Aberdeen Proving Ground, Maryland, with zip code 21005. The solicitation was posted on July 30, 2026, and responses must be submitted no later than August 7, 2026, at 3:59 PM Eastern Time. The requirement focuses exclusively on data reporting obligations related to item identification and delivery documentation, with no additional set-aside categories or special acquisition conditions specified.

Computer Systems Design Services

POSTED

DEADLINE

UII Marking and Data Matrix EncodingThe contract requires the permanent marking of each rod with a Unique Item Identifier using Data Matrix symbols that meet the standards of MIL-STD-130 and ISO/IEC 16022, ensuring traceability and compliance with federal defense specifications. All markings must be durable and legible for the lifespan of the item, with the encoding structured to conform to the Department of Defense’s required data format and placement guidelines. The work is classified as a subcontract under NAICS code 339999 and is associated with the Aberdeen Proving Ground location in Maryland, where all performance and delivery must occur. The opportunity was posted on July 30, 2026, with a response deadline of August 7, 2026, at 3:59 PM Eastern Time, and is managed by the Department of Defense through the W6QK Acc-Apg Adelphi office.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE