This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NSWCCD Salt Fog Corrosion Test Chambers

Closed

N00167-26-SIMACQ-CD-61-0102Federal

Submission Closed07/06/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

International

University of Alberta - Request for Proposal - CFI High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High Performance Liquid Chromatography (UHPLC) System

Solicitation # AB-2026-06236

The University of Alberta is seeking proposals for the supply, installation, and ongoing support of a High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High-Performance Liquid Chromatography (UHPLC) system. This equipment will be utilized by the Faculty of Science, Department of Chemistry, specifically within the Mass Spectrometry Facility to support various projects involving ESI-HRMS, LC-MS, and LC-MS/MS analyses. This solicitation, identified by number AB-2026-06236, was posted on September 11, 2026, with a response deadline of October 6, 2026. Interested parties should direct inquiries to the primary point of contact, Satinder Atwal, the Senior Supply Consultant.

University of Alberta

POSTED

DEADLINE

Supply of DustTrak DRX Model 8533 External Pumps

POSTED

DEADLINE

Supply of Automated Cell Counter and Analyzer

National Institutes Of Health Olao

POSTED

DEADLINE

Handheld XRF Analyzer Supplier

POSTED

DEADLINE

SCMOS Widefield Camera and Adapter Supplier

National Institutes Of Health Olao

POSTED

DEADLINE

Supply of Flash Point Tester

POSTED

DEADLINE

QX700 E Droplet Digital PCR System Supply

National Institutes Of Health Olao

POSTED

DEADLINE

Temp Controlled 42 Plate Hotel

Solicitation # AB482902

Brookhaven Science Associates (BSA) is soliciting quotations for the procurement of a temperature-controlled plate storage incubator with two stackers and a built-in barcode reader, along with comprehensive on-site installation and training for integration with the Art Robbins CryCam UV imaging system at Brookhaven National Laboratory (BNL). The system must support SBS/ANSI-SLAS, low-profile SBS, and Linbro plates, maintaining temperatures between 4C and 25C. This is a small business set-aside solicitation for a firm fixed price purchase order, with the award based on the lowest total evaluated price from a responsive and responsible offeror. Quotations are due by October 2, 2026, and must remain valid for at least sixty days. The procurement includes strict shipping and pricing requirements. For items under 150lbs, shipping may occur via BSA's FedEx account; otherwise, pricing must be all-inclusive of freight, tariffs, and handling. For foreign products over 150lbs where all-inclusive pricing is unavailable, BNL will act as the Importer of Record under DAP Incoterms. Suppliers must provide the country of origin, Unique Entity Identifier (UEI), and applicable ECCN and HTS codes. All electrical equipment must be certified by a Nationally Recognized Testing Laboratory, and onsite personnel must adhere to stringent security badging and safety protocols, including specific documentation requirements for non-U.S. citizens. The contract incorporates BSA General and Supplemental Terms and Conditions for non-commercial items and onsite work, as well as various FAR clauses.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Acquisition for 10X Genomics GEN X Epi Multiome

Solicitation # NINDS09281

The National Institutes of Health Olao is seeking the procurement of proprietary genomics consumables and equipment manufactured by 10x Genomics, Inc. under solicitation NINDS09281. This acquisition includes the GEM-X Epi Multiome system, specific sample kits, chip kits, single index kits, and the 10x Magnetic Separator B. These items are essential for supporting multiomic sequencing workflows, enabling the simultaneous profiling of epigenomic and transcriptomic data from single biological samples. The required products must be fully compatible with existing 10x Genomics instrumentation to ensure data quality, reproducibility, and continuity of research. The system must support high-throughput processing of up to 16 samples per kit using single-use consumables. This procurement is managed by the Department of Health and Human Services with a response deadline of September 21, 2026, and the performance will take place in Bethesda, Maryland.

National Institutes Of Health Olao

POSTED

DEADLINE

Solicitation # 140G0126Q0293

The USGS Geological Survey Florence Bascom Geoscience Center (FBGC) is soliciting quotes under solicitation 140G0126Q0293 for the purchase of a lightweight vibra-coring system to evaluate sub-bottom stratigraphy in coastal areas, rivers, and lakes. The required system must weigh between 100 and 200 lbs, provide at least 3000 lb/ft of adjustable impact force, and exceed 1000 vibrations per minute. Technical specifications include compatibility with 3 and 4-inch core barrels, the ability to collect cores longer than 5 meters, and flexibility to switch between DC-AC or 120-220v power supplies. The procurement also includes the acquisition of a power transformer and 250 meters of cable, with all items to be delivered to Reston, VA, within 60 days after receipt of order. This is a total small business set-aside under NAICS code 334516, with a size standard of 1,000 employees. The contract will be awarded to the responsible offeror providing the lowest priced quotation that receives an acceptable technical compliance rating. Vendors must be registered in the System for Award Management (SAM) and comply with the Buy American Act. Quotes are due by September 16, 2026, with an anticipated award date of September 17, 2026. Payment will be processed electronically through the Invoice Processing Platform (IPP), and invoices must be submitted within 90 calendar days following the expiration of the period of performance.

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

Astromaterials Glovebox Systems - Design & Fabrication (A-BOX)

Solicitation # 80JSC026A-BOX

This notice, issued by NASA’s Johnson Space Center under solicitation number 80JSC026A-BOX, is a Request for Information (RFI) for the design, fabrication, testing, delivery, and installation of controlled-atmosphere glovebox systems to support the Astromaterials Research and Exploration Science Curation Facility. The systems are intended for handling lunar and planetary samples, including those from Artemis missions, and must operate in ambient, cold (−85 to −20 °C), and ultra-cold/cryogenic (< −85 °C) environments while maintaining inert atmosphere conditions. Technical requirements are aligned with the American Glovebox Society Guidelines AGS-G001-2007 (3rd Edition), and compliance with quality standards such as ISO9001, AS9100, and NQA-1 is mandatory. The RFI seeks industry input on feasibility, capabilities, and cost estimates, with no formal proposals required. Access to the technical library containing detailed requirements is granted through SAM.gov after completing a two-step verification process and submitting a formal request form to NASA, with all requestors responsible for U.S. export control compliance. The response deadline has been extended to August 5, 2026, at 4:00 PM Central Time. The RFI emphasizes small business participation and solicit feedback on realistic subcontracting goals, barriers to entry for small businesses, and strategies to enhance involvement such as modularizing scope or encouraging teaming arrangements. NASA is considering potential set-asides for Small Business, Small Disadvantaged Business, HUBZone, Veteran-Owned, Service-Disabled Veteran-Owned, and Women-Owned Small Businesses. Organizational conflicts of interest (OCI) are a significant concern due to the nature of prior involvement in astromaterials handling and related design work; respondents must disclose any potential OCI and propose mitigation strategies, though NASA’s review at this stage does not constitute formal approval or assurance. Responses must be submitted electronically via email to the designated contracting officer and contract specialist, formatted according to Attachment II—Capabilities Questions and Responses—which addresses small business utilization, OCI, technical capability, and business considerations. The place of performance is the ARES Curation Facility in Houston, Texas, and final delivery and installation will occur there. No contract value, pricing, or award criteria are provided, as this is purely an information-gathering phase to inform future procurement strategy. Any information submitted is treated as voluntarily provided under FOIA and will not be publicly

NASA Johnson Space Center

POSTED

DEADLINE

Leica VT1200S Vibrating Blade - Brand name only

Solicitation # 36C25226Q0680

Solicitation 36C25226Q0680 is a brand-name-only request for quote issued by the Department of Veterans Affairs for the procurement of one new, non-refurbished Leica VT1200 S Fully Automated Vibrating Blade Microtome System. This equipment is required by the Research Department at the Jesse Brown VA Medical Center in Chicago, Illinois, to support diabetes mellitus research involving the generation of precision-cut liver slices. The procurement includes the microtome configuration, a NEMA5 15 C13 power cord, VT 1200 Silver Service, and Vibrocheck. The contract is set aside for HUBZone Small Businesses, and the award will be granted based on the Lowest Price Technically Acceptable (LPTA) offer. The successful contractor must deliver the equipment to the Jesse Brown VA Medical Center Warehouse within 30 to 45 calendar days after the award under FOB Destination terms, with shipping fees capped at 250 dollars. No onsite installation is required, but the contractor must provide the manufacturer's standard warranty. Quotes are due by September 16, 2026, at 1 PM CDT and must be submitted electronically to the contracting officer. Offerors must comply with Buy American certifications and specific security and access procedures at the delivery site. Payment will be made electronically upon receipt of the equipment.

252-NETWORK Contract Office 12 (36C252)

POSTED

about 23 hours ago

DEADLINE

in 4 days

AI Contract Overview

The Naval Surface Warfare Center Carderock Division is soliciting three Salt Fog Corrosion Test Chambers—two Model 22 units and one Model 21 unit—under a combined synopsis/solicitation issued as a Request for Quotation with the number N00167-26-SIMACQ-CD-61-0102. This procurement is conducted under Simplified Acquisition Procedures and follows streamlined commercial acquisition methods outlined in FAR Subpart 12.6, as modified by the Revolutionary FAR Overhaul. The requirement is strictly a 100% Total Small Business Set-Aside under NAICS code 334516, which defines a small business as one with up to 1,000 employees. The equipment must meet exact technical specifications detailed in the attached Minimum Requirements Salt Fog Test Chamber document, including internal test zones of 30 cubic feet for Model 22 and 20 cubic feet for Model 21, a 55-gallon solution tank, 240V/3-phase/60 Hz power, and the ability to perform ASTM B117, ISO 9227, and MIL-STD-810 corrosion tests. All units must support ASTM D1193 Type 4 DI Water and feature a full-view acrylic lid. The contract type is Firm-Fixed-Price, and delivery is FOB Destination to 9500 MacArthur Boulevard, West Bethesda, Maryland 20817-5700; any quote using a different F.O.B. term will be rejected. Quotes must be submitted via email to Michael S. Brodie no later than July 6, 2026, and must include detailed pricing, commercial technical datasheets, estimated lead time, the vendor’s SAM.gov Unique Entity Identifier, and CAGE code. While offerors are not required to submit individual certifications, they must maintain an active, fully completed SAM.gov profile at the time of submission. Offers for “equal” products must clearly identify the brand name, model number, provide descriptive literature, and detail any modifications made to meet the solicitation’s salient characteristics. Evaluation will be conducted on a pass/fail basis for technical acceptability, with only technically qualified quotes considered for award based on overall value, including past performance and price reasonableness. Past performance will be assessed via SPRS or other sources, with a neutral rating assigned if no data is available. The

General Info

U.S. Navy seeks small business quotes for salt fog test chambers by July 6, 2026, firm-fixed-price, FOB destination, SAM.gov registered.

Agency

Department Of Defense → Nswc CarderockView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Bethesda, MD, 20817, USA

Set-Aside

SBA

Documents

(1)

Minimum Requirements for Salt Fog Test Chamber Procurement

PDF•sow

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 26

Combined Synopsis

Response DeadlineJul 6

Deadline has passed

Submission Closed

07/06/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Nswc Carderock

Contacts2 people available

OfficeBETHESDA, MD, 20817-5700, USA

Organization / Agency

Department Of Defense → Nswc Carderock

View Agency Profile

Office AddressBETHESDA, MD, 20817-5700, USA

Contacts

Michael S. Brodie

Barbaraann K Witz

Full Description

COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL PRODUCTS

General Information:

Document Type: Combined Synopsis/Solicitation
Solicitation Number: N00167-26-SIMACQ-CD-61-0102
PR Number: 1301374851
Posted Date: 25 June 2026
Response Date: 06 Jul 2026
Classification Code: 6635 (Physical Properties Testing Equipment)
NAICS Code: 334516 (Analytical Laboratory Instrument Manufacturing)
Set-Aside: Total Small Business Set-Aside

1.0 Background & Authority
This is a combined synopsis/solicitation for commercial products prepared in accordance with the streamlined commercial procedures in Federal Acquisition Regulation (FAR) Subpart 12.6, as amended by the Revolutionary FAR Overhaul (RFO). This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

The solicitation number is N00167-26-SIMACQ-CD-61-0102 and is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions are those in effect through the current RFO baseline.

This requirement is a 100% Total Small Business Set-Aside. The associated NAICS code is 334516 with a small business size standard of 1,000 employees.

The Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a Firm-Fixed-Price (FFP) contract for three (3) Salt Fog Corrosion Test Chambers on a "Brand Name or Equal" basis to the Auto Technology Company (Model 21 and Model 22).

2.0 Line Items - See attached minimum specifications

3.0 Description of Requirements & Delivery

Technical Specifications: Please see the attached "Minimum Requirements Salt Fog Test Chamber.docx" for full technical specifications, salient characteristics, and utility requirements (e.g., 240V/3-Phase power, ASTM D1193 Type 4 DI Water).
Delivery Information: FOB Destination In accordance with FAR 52.247-34.
Offers submitted on an F.O.B. basis other than that specified in the solicitation shall be rejected as unacceptable.

Delivery location is

9500 MacArthur Boulevard

West Bethesda, Maryland 20817-5700

4.0 Evaluation Factors for Award
The Government intends to award a Firm-Fixed-Price (FFP) delivery order to the responsible Quoter whose technically acceptable quote is considered to be the most advantageous and represents the best overall value to the Government, price and past performance considered. The evaluation will be conducted under Simplified Acquisition Procedures (SAP).

Factor A — Technical Acceptability: All quotations will be evaluated on a Pass/Fail basis to determine if the proposed equipment clearly meets the technical specifications outlined in the Salient Characteristics and attached Minimum Requirements document.
Factor B — Past Performance: The Government reserves the right to evaluate past performance information prior to award using SPRS or other data sources. A neutral past performance rating will be assigned if no relevant past performance information is available.
Factor C — Price: The price of all technically acceptable quotations will be evaluated for reasonableness.

5.0 Submission Instructions
Quotes must be submitted via email to Michael S. Brodie at michael.s.brodie7.civ@us.navy.mil no later than the response date and time listed above.

BRAND NAME OR EQUAL

To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must meet the salient physical, functional, or performance characteristics specified in this solicitation as well as clearly identify the item by:

Brand name, if any; and

Make or model number;

Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

Quotes must include pricing, commercial technical datasheets, and estimated lead time/delivery. In accordance with overhauled FAR Part 4, Quoters are not required to submit individual representations and certifications with their quote; however, Quoters must have an active, fully completed profile in the System for Award Management (SAM.gov) at the time of quote submission. Please include your SAM.gov UEI and CAGE code on your quote document.

6.0 Provisions and Clauses (RFO-Compliant)
The following FAR and DFARS provisions and clauses apply to this acquisition and are incorporated by reference or full text under the overhauled FAR guidelines:

FAR 52.204-7 – System for Award Management
FAR 52.204-13 – System for Award Management Maintenance
FAR 52.204-16 – Commercial and Government Entity Code Reporting
FAR 52.204-18 – Commercial and Government Entity Code Maintenance
FAR 52.211-6 – Brand Name or Equal
FAR 52.212-1 – Instructions to Offerors—Commercial Products and Commercial Services
FAR 52.212-4 – Terms and Conditions—Commercial Products and Commercial Services
FAR 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors
52.247-34 F.o.b. Destination
DFARS 252.203-7002 – Requirement to Inform Employees of Whistleblower Rights
DFARS 252.204-7003 – Control of Government Personnel Work Product
DFARS 252.204-7012 – Safeguarding Covered Defense Information and Cyber Incident Reporting
DFARS 252.204-7015 – Notice of Authorized Disclosure of Information for Litigation Support
DFARS 252.225-7001 – Buy American and Balance of Payments Program
DFARS 252.225-7048 – Export-Controlled Items
DFARS 252.232-7003 – Electronic Submission of Payment Requests and Receiving Reports
DFARS 252.232-7006 – Wide Area WorkFlow Payment Instructions
DFARS 252.244-7000 – Subcontracts for Commercial Products or Commercial Services