Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NUT, TUBE COUPLING

Active
SPE7M3-26-T-8168Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of NUT, TUBE COUPLING components under solicitation SPE7M3-26-T-8168, with a total quantity of 126 purchase units, each equivalent to two individual items. The items must comply with technical specifications NAS593 Revision 7 and NAS597 Revision 5, and all requirements from the DLA Master List of Technical and Quality Requirements take precedence over any other standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the referenced standards. Packaging must follow ASTM D3951 and MIL-STD-129 labeling guidelines, with palletization adhering to DLA’s packaging requirements, and the unit of issue and quantity per unit pack must match the contract specifications. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date is 164 days from contract award, with an original deadline of February 4, 2027, and the need ship date set for February 2, 2027. The product is designated as a critical application item, requiring full and open competition, and the Certificate of Conformance procedures are authorized unless superseded by a Quality Assurance Letter of Instruction. The delivery address is DLA Distribution Cherry Point in North Carolina, and transportation must follow DLA Procurement Notes C19 and C20. The contract was posted on August 10, 2026, with a response deadline of August 21, 2026, and the point of contact is William Cain of the Department of Defense’s Fluid Handling Division.

General Info

Procure 126 NUT TUBE COUPLING units per NAS593/597 specs, FOB origin, deliver by Feb 2, 2027 to Cherry Point, NC.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,TUBE COUPLING
NUT, TUBE COUPLING.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 PG = 2 EA
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
FULL AND OPEN COMPETITION APPLY
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS593 REVISION NR 7 DTD 06/30/2016 PART PIECE NUMBER: NAS593-10H
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NAS597 REVISION NR 5 DTD 04/28/2023 PART PIECE NUMBER:
SPE7M3-26-T-8168
SECTION B
PR: 7017778193 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017778193 0001 PG 126.000
NSN/MATERIAL:4730008167046
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:02/02/2027 Original Required Delivery Date:02/04/2027
SPE7M3-26-T-8168
SECTION B
PR: 7017778193 PRLI: 0001 CONT’D
SPE7M3-26-T-8168 NSN/Part Number: 4730-00-816-7046 Quantity: 126 PG Purchase Request: 7017778193QTY: 126 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
Federal
Shotover ARS Airborne Surveillance mapping system - 2026-SG-0024The contract pertains to the Shotover Augmented Reality Mapping system designed for airborne surveillance, currently deployed alongside DEA airborne imaging systems. This advanced system enhances situational awareness by overlaying critical mission information such as street names, addresses, parcel data, business names, and landmarks directly onto live video feeds. It serves to bolster ground-based enforcement by providing recorded video evidence, improving the efficacy and precision of surveillance operations. Issued by the Drug Enforcement Administration under the Department of Justice, this contract is identified as "Shotover ARS Airborne Surveillance mapping system - 2026-SG-0024" and falls under the NAICS code 336413. Although certain logistical details such as solicitation number and exact place of performance are not specified, the contract emphasizes support for small businesses through a dedicated point of contact within the DEA Small Business Program. The system’s deployment indicates an ongoing effort to integrate cutting-edge technology into law enforcement surveillance capabilities.
Drug Enforcement Administration

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 336413
New
DIBBS
Supply of Cross-Tube Component (NSN 1560-LL-NC0-1153)The contract seeks the manufacture or supply of two units of a cross-tube component identified by part number 205-030-104-005 and national stock number 1560-LL-NC0-1153, to meet the technical specifications established by Bell Textron and the Defense Logistics Agency. The component is critical for defense applications and must adhere to exacting quality and performance standards set by these entities. The place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-0021, indicating the operational location where the delivered parts will be managed or integrated. The contract is classified as a subcontract under NAICS code 336413, which corresponds to aircraft parts and auxiliary equipment manufacturing. The solicitation was posted on August 10, 2026, with a firm response deadline of August 18, 2026, giving potential suppliers a limited window of eight days to submit proposals. The responsible agency is the DLA Fleet Readiness Center under the Department of Defense, which oversees logistics and maintenance support for military equipment. Although no specific point of contact or set-aside details are provided, the procurement is part of the broader DLA procurement system, managed through the DIBBS platform, and interested parties must access the official UI link to obtain full submission requirements and technical documentation. Timely and compliant responses are essential to meet operational readiness timelines.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7M4-26-T-328R
The contract is for the procurement of 2,405 units of a grooved pulley identified by NSN 3020002771123 and part number MS20220-2, designated as a critical application item and classified as a commercial item. The product must comply with stringent technical and quality requirements outlined in MIL-DTL-7034/2B and MIL-DTL-7034F(2), with adherence to TDP Revision B General 2 and reference drawing 200415485. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards unless explicitly overridden by the contract. Sampling and inspection are strictly controlled under MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned predefined verification levels or AQLs. The item is subject to qualification under the Qualified Products List or Qualified Manufacturers List and must be packaged and labeled in compliance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements. Delivery is FOB origin with a 164-day lead time and must arrive by February 2, 2027, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the contract is awarded under a HUBZone Set-Aside with a primary point of contact at the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
BRACKET ASSY, CYLIND
Solicitation # SPE4A7-26-T-637H
The contract pertains to the procurement of a bracket assembly for a cylinder system, identified by part number 800579-01 and NSN 1680-00-465-9457, with a quantity of six units to be delivered FOB origin within 102 days. The item is classified as a critical application component, and all inspection and acceptance must occur at the manufacturer’s origin using a zero-defect sampling standard—either MIL-STD-1916 or ASQ H1331—with critical attributes requiring acceptance levels of AQL 0.1, major attributes at AQL 1.0, and minor at AQL 4.0. Unspecified attributes are treated as major unless otherwise stated in referenced documents, and only zero non-conformances are acceptable unless the contract specifies otherwise. Sampling methodology may use either attribute or variable inspection at the manufacturer’s discretion, and MIL-STD-105/ASQ Z1.4 may inform sample size but not acceptance criteria. Packaging must comply with ASTM D3951 while being subordinate to the DLA Master List of Technical and Quality Requirements, with labeling and unit packaging strictly adhering to MIL-STD-129 and palletization governed by DLA’s RP001. The item must bear physical identification per RQ017, and any non-accepted supplies must have government identification removed. Cybersystem compliance requires a CMMC Level 2 self-assessment, and all documentation is governed by the DLA Master List version in effect on the solicitation date. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with no variance allowed in quantity. The required ship date is November 29, 2026, while the original delivery deadline is November 4, 2027. The contract is issued under SPE4A7-26-T-637H, with procurement managed through a federal acquisition channel under NAICS code 336413 and point of contact Grayson Andrews of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-637M
The procurement is for four units of a PIN, DOOR VISOR with NSN 0001S00000052, manufactured under the NAICS code 336413 and sourced through a Small Business Set-Aside. The item may require casting or forging and typically involves specialized tooling not held by the government, necessitating coordination through the DLA Casting and Forging Assistance portal for sourcing support. Manufacturing must adhere to tailored high-level quality requirements, with the supplier’s inspection system required to meet a minimum standard of SAE AS9003 or ISO 9001 tailored to AS9003. Additive manufacturing is strictly prohibited unless explicitly authorized, and any offer incorporating AM is ineligible for award. First article testing is mandatory, requiring the submission of two units to Warner Robins ALCMC within 180 calendar days of contract award, with the government conducting tests and providing written approval or rejection within 240 days. Inspection and acceptance occur at origin per FAR 52.246-2, and sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan with critical, major, and minor attributes held to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging and marking are governed by MIL-STD-129 with special marking code 00 and palletization per DLA RP001, while no item unique identification is required per customer request. The item contains export-controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons and requiring contractors to hold an approved US/Canada Joint Certification Program certification, complete mandatory DOD export control training and DLA questionnaire, and receive explicit approval from the DLA controlling authority. Cybersecurity requirements include compliance with DFARS 252.204-7012 for safeguarding covered defense information and adherence to CMMC Level 2 certification for all third-party assessment organizations. Payment must be processed electronically through WAWF, with required DoDAAC fields specified in the eventual award. All offers must be submitted via DIBBS by August 18, 2026, and include a Safety Data Sheet, or the offeror will be deemed nonresponsible. The contract is governed by multiple FAR and DFARS clauses addressing whistleblower rights, disclosure controls, prohibition of hexavalent chromium, Buy America requirements
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, SCUFF, HYDRAUL
Solicitation # SPE4A7-26-R-XA11
The contract solicitation SPE4A7-26-R-XA11 issued by the Department of Defense’s DLA Aviation, ASC Supplier Oper AE and AF Division, seeks the procurement of a single item—the PLATE, SCUFF, HYDRAULIC—with NSN 1650-00-321-6288 and part number 86158-1, sourced exclusively from HYDRO-AIRE AEROSPACE CORP or CRANE COMPANY. This is a critical application item under an indefinite delivery contract with a five-year base period, a guaranteed minimum purchase of 20 units, and a maximum contract value cap of $350,000. Pricing is firm fixed price with no variance allowance, and delivery must occur 156 days after receipt of order under FOB destination terms. Inspection and acceptance are conducted at origin, and the contractor must adhere to stringent quality standards including ISO 9001:2015, MIL-STD-1916 or ASQ H1331 Table 1 sampling for verification, and strict assignment of verification levels or AQLs based on attribute classification. Packaging must conform to ASTM D3951, but all DLA Master List of Technical and Quality Requirements prevail; palletization follows RP001, and all labeling complies with MIL-STD-129, including hazardous and radioactive material marking per applicable federal regulations. Compliance with cybersecurity and regulatory mandates is mandatory, including CMMC Level 2 self-assessment, NIST SP 800-171 DOD assessment requirements through DFARS 252.240-7997, and adherence to Buy America, domestic preference, and prohibited sourcing rules such as restrictions on materials from Xinjiang and unmanned aircraft systems from covered foreign entities. Contractors must satisfy multiple DFARS and FAR clauses covering counterfeit part avoidance, electronic part sourcing, safety notifications, trafficking in persons, paid sick leave, and DEI discrimination prohibitions. The contractor must maintain an active SAM registration with current representations and certifications, and submit proposals via DIBBS or email to Michael Kershaw, while ensuring submissions do not exceed 15 MB. Invoicing must be processed through WAWF using prescribed DoDAACs, and all documentation, configuration changes, and deviations require formal engineering change proposal processing. The acquisition is not a small business set-aside and will be awarded based on a best
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
COVER, SEAT CUSHION,
Solicitation # SPE7LX-26-U-9530
The contract pertains to the procurement of a cover for a seat cushion, identified by part number 109826-1 and NSN 1680-01-617-6695, supplied by BAE Systems Land & Armaments L.P. with CAGE code 54786. The requirement is issued under solicitation SPE7LX-26-U-9530 with a delivery window of 165 days, FOB origin, and a fixed quantity of 42 units at a unit price of $42.00, totaling $1,764. The contract prohibits any quantity variance and mandates inspection and acceptance at the destination. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and palletization must adhere to specified DLA standards. All packaging and labeling must be marked appropriately, and the Unit of Issue and Quantity per Unit Pack must match the contract specifications. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stipulated in the contract. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless restricted by contract terms. Configuration changes require an Engineering Change Proposal or variance request, and documentation for source approval is mandatory. The item is classified as a critical application item, and all government identification must be removed from non-accepted supplies. The contract was posted on August 10, 2026, with responses due by August 25, 2026, and is managed under the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-R-0688
The contract pertains to the procurement of an aircraft skin part designated by NSN 1560-011519541 and part number 65-55125-1, manufactured in accordance with drawing 81205 65-55125 Revision C dated November 4, 1988. This is an indefinite quantity contract with a five-year base period and no option periods, under a total small business set-aside, with an estimated annual requirement of 40 units. Deliveries are required to be completed within 300 days after order placement, with FOB origin terms and inspection and acceptance also conducted at the origin. Access to technical data associated with this item is restricted to contractors certified by the Department of Defense under DOD 5220.22M, requiring submission of DD Form 2345 to the Defense Logistics Information Services. The solicitation, numbered SPE4A726R0688, will be issued on or about August 10, 2026, and is only available electronically via the DLA Internet Bid Board System; no paper copies will be provided. Proposals must be submitted by September 10, 2026, and all correspondence should be directed to Ryan Loeffelholz at the Department of Defense, Defense Logistics Agency Aviation, located in Richmond, Virginia.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
KIT, DEPOT OVERHAUL-HYD
Solicitation # SPE7LX-26-U-9401
This contract is for the procurement of a KIT, DEPOT OVERHAUL-HYDRAULIC MOTOR with NSN 1005-01-098-8122, in a quantity of 30 units, under solicitation SPE7LX-26-U-9401. The items must be delivered within 55 days of award and are subject to stringent technical, quality, and security requirements. The contractor must comply with DLA’s Master List of Technical and Quality Requirements, and adherence to DLA Directive Procurement Notes C03 is mandatory for supply chain traceability documentation retention. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring strict handling protocols, including access restrictions limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The contractor must also remove government identification from non-accepted supplies and follow DLA packaging standards. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and the item falls under covered defense information protocols. Demilitarization procedures for Category I munitions items apply, and all documentation must comply with the specified revisions effective on the solicitation or award date. The contract is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-638F
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CUP ASSY, LOWER DR, A
Solicitation # SPE4A5-26-T-338U
The contract pertains to the procurement of a Cup Assembly, Lower Driver, A, identified by NSN 1630-01-545-5349 and part number 901-062-083-105, manufactured by Bell Textron Inc. Four units are required at a unit price of $4.00, totaling $16.00, with delivery due in 165 days f.o.b. origin to the specified receiver warehouse in Tracy, California. The item is designated as a critical application and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with hazardous material handling governed by TQ requirement IP025 if applicable. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels are assigned as VII, IV, and II for critical, major, and minor attributes respectively. Configuration changes require an Engineering Change Proposal or Request for Variance, and physical identification of the item must be marked per RQ017. Unit of issue is EA, with no quantity variance permitted. Government identification must be removed from non-accepted supplies per RQ011, and Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must meet RT001 standards. The original delivery date is September 27, 2028, but the needed ship date is January 31, 2027. All documentation, source approval requests, and quality assurance processes are governed by referenced DLA directives, with the solicitation issued under SPE4A5-26-T-338U and managed by the Department of Defense, ASC Supplier Operations OEM Division, with Kay Bates as the point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CYLINDER, RESERVOIR
Solicitation # SPE4A7-26-T-637X
The contract pertains to the procurement of one cylinder, reservoir with part number 41001713 and NSN 1650-01-047-1221, supplied by PTI Technologies Inc. under solicitation SPE4A7-26-T-637X. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the manufacturing origin. Strict compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is mandated, including specific packaging codes and procedures, with no special marking required. The item is classified as a critical application and must adhere to zero-defect sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. All quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, with additional controls including CMMC Level 2 self-assessment, cybersecurity compliance, and documentation for source approval. The item is destined for the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung, with freight and shipping governed by DLA procedural notes and designated forwarding details. The contract specifies a required delivery date of August 7, 2026, and ties all performance obligations to compliance with the full contractual documentation including DLA packaging, inspection, and identification protocols.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract requires full compliance with hazardous substance restrictions and mandates the preparation, submission, and ongoing maintenance of Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and applicable federal regulations. The work involves ensuring all materials meet stringent chemical safety standards and that SDS documentation remains accurate, current, and accessible to support regulatory adherence and workplace safety. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, specifically targeting small businesses as defined by FAR 19.5, with the NAICS code 541690 indicating it falls under other scientific and technical consulting services. Performance of the work is centered in San Diego, California, with the contracting agency being the Fluid Handling Division of the Department of Defense. Responses must be submitted by August 21, 2026, and the solicitation was posted on August 10, 2026, offering qualified small businesses an opportunity to support critical defense-related hazardous materials compliance efforts.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 323113
New
DIBBS
Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and marking services for hose units in strict compliance with MIL-STD-129 and MIL-STD-2073-1E standards, ensuring all components meet military-grade requirements for shipment readiness. This includes accurate shelf-life date marking, physical identification using the RQ017 code, and proper palletization to safeguard integrity during transport and storage. All work must be performed with precision to maintain traceability, durability, and regulatory adherence throughout the supply chain. This is a Total Small Business Set-Aside subcontract under NAICS code 323113, exclusively available to small businesses as defined by the SBA. The opportunity is issued by the Department of Defense’s Fluid Handling Division with performance required in San Diego, California, 92136-3581. Proposals must be submitted by August 21, 2026, and are accessible through the DIBBS portal. The solicitation does not list a specific point of contact or agency office address, and no funding details are provided beyond the compliance and performance expectations.
Commercial Screen Printing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract requires the performance of first article testing on nonmetallic hose components to ensure full compliance with applicable military standards, including rigorous documentation of all test procedures and results. The work involves detailed verification of material properties, dimensional accuracy, pressure performance, and environmental resilience as mandated by defense specifications, with all findings reported in a format approved by the Government Quality Assurance Representative. Close coordination with the QAR is essential throughout the testing phase to ensure transparency, address any nonconformances promptly, and obtain formal acceptance prior to proceeding with production. This is a total small business set-aside subcontract under NAICS code 541380, intended exclusively for small businesses as defined by the SBA. The opportunity is managed by the Fluid Handling Division within the Department of Defense, with all work to be performed at a site in San Diego, California, specifically at the ZIP code 92136-3581. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, with the contract to be awarded through the DIBBS platform. Failure to meet the technical requirements or timelines may result in disqualification, and all parties must adhere to federal acquisition guidelines for subcontractor performance and reporting.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Nonmetallic Hose Manufacturing and SupplyThe contract requires the manufacture and delivery of 175 units of nonmetallic hose with a 7-inch inner diameter and 35-foot length, fully compliant with military specifications. All units must undergo first article testing to verify conformance to technical requirements, and material composition must meet established standards for performance and durability. Proper packaging and marking are mandatory to ensure traceability, handling safety, and readiness for military logistics systems. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Fabrication. Performance is required at a specified location in San Diego, California, with a delivery schedule tied to the broader timeline of the Department of Defense’s Fluid Handling Division. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, providing a 11-day window for interested small businesses to submit proposals. The contract is managed by the Department of Defense’s Fluid Handling Division, which oversees procurement for specialized fluid transport systems critical to military operations. While no point of contact is listed, all inquiries and submissions must be processed through the DIBBS platform using the provided link to ensure eligibility and timely consideration. Compliance with all technical, administrative, and small business certification requirements is essential to qualify for award.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
DFARS Cybersecurity and Information SafeguardingThis contract requires the implementation of NIST SP 800-171 security controls to protect Covered Defense Information and ensure compliance with DFARS 252.204-7012, which mandates safeguarding measures for sensitive data handled under Department of Defense contracts. The contractor must establish and maintain a robust cybersecurity framework that includes access control, audit and accountability, configuration management, and incident response capabilities, all aligned with the NIST standard. Additionally, the contractor is obligated to promptly report any cybersecurity incidents involving CDI in accordance with DFARS requirements and to position themselves for future CMMC certification readiness, demonstrating a proactive approach to evolving defense cybersecurity standards. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a compliance deadline for submission by August 21, 2026. The contract is classified as a subcontract under NAICS code 541512, indicating it relates to computer systems design services. The solicitation is issued by the Fluid Handling Division of the Department of Defense, which expects the contractor to meet all federal cybersecurity obligations without reliance on external set-aside provisions, and to maintain documentation and practices that support verification during audits or assessments, underscoring the critical nature of continuous compliance and operational security in supporting national defense systems.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Shelf-Life and Packaging Compliance ServicesThe contract requires full compliance with MIL-STD-2073-1E for packaging standards, ensuring all items are properly packed to maintain integrity during storage and transport. It mandates the inclusion of shelf-life markings in accordance with MIL-STD-129, specifically section 5.10.1, which requires accurate labeling of cure and expiration dates to ensure product usability and safety over time. All documentation and labeling must be fully integrated into the packaging process to guarantee traceability and regulatory adherence. The work is classified as a subcontract under NAICS code 541690, tied to the Fluid Handling Division of the Department of Defense with performance location in New Cumberland, Pennsylvania, zip code 17070-5002. Responses are due by August 21, 2026, following a posted date of August 10, 2026.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Safety Data ComplianceThe contract requires the preparation and submission of Material Safety Data Sheets and hazard warning labels that adhere strictly to OSHA 29 CFR 1910.1200 and MIL-STD-129 standards, ensuring full compliance with federal safety and labeling regulations for hazardous materials. Special attention must be paid to the prohibition of ozone-depleting chemicals, and all documentation must reflect accurate, current, and complete hazard communication information as mandated by these directives. The work is to be performed in support of the Department of Defense’s Fluid Handling Division, with the place of performance located in New Cumberland, Pennsylvania, at ZIP code 17070-5002. The contract is classified as a subcontract under NAICS code 541690, and the response deadline is August 21, 2026, with the solicitation posted on August 10, 2026. All deliverables must meet the technical and regulatory requirements without exception to ensure operational and environmental compliance.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Certification ServicesThe contract is for independent testing and certification of an initial production unit to ensure compliance with Military Performance Specification MIL-PRF-32107/3, Quality Assurance Plan QAP 16236, and specific shelf-life marking requirements. The work involves verifying that the product meets all technical and regulatory standards through rigorous evaluation and documentation, with all test results and reports submitted in accordance with Federal Acquisition Regulation clauses. The deliverables centers on formal certification and submission of comprehensive test reports to confirm adherence to military and quality standards. This is a subcontract under the Department of Defense’s Fluid Handling Division, with a place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation, identified under NAICS code 541380, is open for responses through August 21, 2026, with proposals due by 5:00 PM Eastern Time. The contract is not set aside for any specific small business category, and all interested parties must submit their offers through the DIBBS portal using the provided link before the deadline.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Manufacture of MIL-PRF-32107/3 Compliant Air Duct HoseThe contract requires the manufacture of an air duct hose designated by NSN 4720016504958, fully compliant with the military specification MIL-PRF-32107/3, specifically meeting Type I (Code S) requirements. The product must be fabricated using approved materials, subjected to rigorous testing protocols to ensure performance and durability, and packaged in accordance with defense standards to preserve integrity during storage and transport. A strict 60-month non-extendable shelf life is mandated, requiring precise material selection and manufacturing processes that ensure long-term reliability without degradation. The hose is intended for use in military fluid handling systems where operational readiness and environmental resilience are critical. This is a subcontract solicitation issued by the Fluid Handling Division of the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026. The North American Industry Classification System code 326220 indicates the work falls under rubber product manufacturing, underscoring the specialized nature of the production process. All work must adhere to federal defense supply chain protocols, and adherence to specification requirements is non-negotiable, with failures potentially leading to rejection of delivered items and loss of contract eligibility.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541211
New
DIBBS
Small Business Subcontracting Support (Accelerated Payments)The contract titled Small Business Subcontracting Support Accelerated Payments requires comprehensive administrative and financial services to ensure full compliance with FAR 52.232-40, specifically focusing on the timely and accelerated payment of small business subcontractors. This involves managing payment workflows, coordinating with government payment systems, and implementing processes that reduce delays and enhance cash flow for qualified subcontractors. The goal is to streamline financial operations while maintaining strict adherence to federal regulations designed to support small business participation in defense contracting. The work is associated with the Fluid Handling Division under the Department of Defense and will be performed at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026, indicating a tight turnaround for interested parties. The NAICS code 541211 identifies the primary scope as accounting, bookkeeping, and financial reporting services, underscoring the administrative and procedural nature of the support required. This opportunity is categorized as a subcontract and does not specify a set-aside type, meaning it is open to all qualified respondents regardless of business size, though the core objective centers on enhancing small business payment compliance.
Offices of Certified Public Accountants

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Domestic and Ocean Transportation via U.S.-Flag VesselsThe contract involves the domestic and ocean transportation of supplies using U.S.-flag vessels in full compliance with cargo preference laws, ensuring that American-owned and operated ships are utilized for moving government freight. This subcontract requires strict adherence to regulatory standards governing maritime cargo routing and emphasizes the integration of shipment data into the Web-based Automated Workflow System to ensure accurate, real-time reporting and tracking of all transport activities. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the primary operational hub for logistics coordination. Issued by the Fluid Handling Division under the Department of Defense, this solicitation falls under NAICS code 483111, which classifies it as water transportation of freight and cargo. The opportunity is open for response until August 21, 2026, with the posting date set for August 10, 2026. While no specific set-aside status is indicated, the requirement for U.S.-flag vessels inherently supports domestic maritime industry goals. The contract’s success hinges on seamless system integration with WAWF, precise documentation, and the ability to meet stringent federal transportation mandates through certified U.S.-owned shipping providers.
Deep Sea Freight Transportation

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires the safe management of hazardous substances used in manufacturing and cleaning operations, with strict adherence to safe handling, accurate labeling, proper packaging, and complete documentation procedures. It mandates full compliance with the Globally Harmonized System of Classification and Labelling of Chemicals and includes the systematic management of Safety Data Sheets to ensure regulatory and operational safety standards are consistently met. All activities must be performed in accordance with established protocols to minimize risk and maintain environmental and personnel safety. This is a subcontract under the NAICS code 562910, issued by the FLUID HANDLING DIVISION of the Department of Defense, with a place of performance located in NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026. The contract does not specify a set-aside type or organization type, and no point of contact details are provided in the data. Interested parties must submit proposals through the designated DIBBS portal using the provided UI link prior to the deadline.
Remediation Services

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details