Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7LX-26-U-9257Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 1,456 O-RINGS with NSN/Part Number 5331-01-545-0130 under solicitation SPE7LX-26-U-9257, issued by the Department of Defense’s Strategic Acquisition Program Directorate. All items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed prior to return. Documentation for source approval requests is required, and the delivery deadline is 88 days after award. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and is designated as a total small business set-aside under NAICS code 336310. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.

General Info

Procure 1,456 asbestos-free O-rings, NSN 5331-01-545-0130, delivery in 88 days, small business set-aside.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7LX-26-U-9257.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5331-01-545-0130 Quantity: 1,456 EA Purchase Request: 1000238845QTY: 1456 Delivery: 88 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
COVER ASSEMBLY
Solicitation # SPE4A5-26-T-328G
The contract pertains to the procurement of a COVER ASSEMBLY with part number 3171222-1 and NSN 4820-01-154-5527, for a quantity of 13 units, under solicitation SPE4A5-26-T-328G. Delivery is required FOB origin with a lead time of 171 days, and the item must be delivered by January 31, 2027, with the original required delivery date set for March 24, 2027. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA’s packaging requirements RP001, with palletization also governed by those standards. The DLA Master List of Technical and Quality Requirements takes precedence over all other specifications and includes referenced requirements such as RQ011 for removal of government identification from non-accepted supplies, RQ017 for bare item marking, and RT001 for measuring and test equipment. Unit Identification is not required as per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All documentation and compliance obligations are governed by the applicable revision of the DLA Master List on the solicitation issue date. The delivery destination is Tinker AFB, Oklahoma, and transportation instructions must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
VALVE, LINE PIERCING
Solicitation # SPE7MC-26-T-115P
The contract requires the procurement of 75 units of a Commercial Off the Shelf line piercing valve equipped with a depressor valve and needle valve shut-off, a dust cover, and a neoprene seal, designed to fit 3/16, 1/4, and 5/16 inch O.D. tubing. The item is identified by NSN 4820-00-499-2211 and must be delivered as an end item tool kit. Strict prohibitions ban the use or incorporation of Class I ozone-depleting chemicals, overriding any conflicting specification requirements without relieving compliance with product performance standards. All substitutions or alternative materials require prior approval. The valve must be packaged in compliance with ASTM D3951 and further meet DLA RP001 packaging requirements for procurement, including palletization standards. Packaging and labeling must adhere to MIL-STD-129 for shipment and storage, incorporating bar-coding as mandated. Inspection and acceptance occur at the destination, with the government conducting final evaluation under FAR 52.246-2. Delivery is FOB origin with a 161-day performance period, targeting a shipment date of December 25, 2026, to the designated DLA Distribution facility in New Cumberland, PA. The contract is fixed-price with zero variance allowed on quantity, and payment must be processed electronically via Wide Area WorkFlow using an invoice and receiving report. The contracting officer has not yet defined the specific contract type, and all contractor representations, certifications, and socioeconomic status disclosures are left to offerors during proposal submission. Compliance with safeguarding defense information controls, trafficking in persons policies, employment eligibility verification, and hazardous material reporting is mandatory, and the supplier must be capable of providing the item as a true COTS product without unauthorized modifications. The award will be based on a solicitation issued July 5, 2026, with proposals due by July 16, 2026, submitted exclusively through the DLA Internet Bid Board System.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
RETAINER, PLANETARY
Solicitation # SPE4A5-26-T-327B
The contract pertains to the procurement of six planetary retainers, identified by NSN 2910-01-641-3642, under solicitation SPE4A5-26-T-327B issued by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense. The requirement is for delivery within 171 days of award, with response submissions due by August 12, 2026. Technical and quality mandates are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and physical identification of bare items is required, though Item Unique Identification is waived per the Service customer’s request, invoking DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must be adequate to ensure compliance. Covered defense information is subject to applicable protections, and performance is designated for Cherry Point, North Carolina, with Steven Lewis as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-911W
This contract solicits 10 O-rings identified by NSN 5331-01-661-6032 under solicitation number SPE7L1-26-T-911W, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after award. The items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must meet DLA standards, and all supplies must be stripped of government identification if not accepted. Source approval documentation is required as per RC001, and covered defense information guidelines may apply. The use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be approved unless explicitly authorized. Asbestos is banned from all supplied items, and any alternative materials must be validated per Clause L30 and Provision 4 conditions. The contracting activity is under the Department of Defense, Land Supply Chain, with performance set in Norfolk, Virginia, and primary point of contact is Kristina Derry via email and phone.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-915H
The contract pertains to the procurement of 149 units of an O-RING with NSN 5331-01-599-7035 under solicitation number SPE7L1-26-T-915H, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to delivery. The delivery timeline is 140 days after contract award, with performance occurring at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the NAICS code is 336310. Primary point of contact is Robert Warne, reachable at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE AND SLEEVE SET A
Solicitation # SPE4A5-26-T-322P
The contract is for a matched valve and sleeve set assembly, metering type, identified by part number 3601509-1 and NSN 4820011138349, supplied by Honeywell International Inc. A total of 43 units are required at a unit price of $43.00, with delivery set for 171 days after award. The item is classified as a critical application item and must conform to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which override any other standards. The supplier must comply with DLA packaging standards including MIL-STD-129 for marking and labeling, ASTM D3951 for general packaging, and RP001 for palletization, with all packaging and labeling adhering strictly to government specifications. Item Unique Identification is not required per the service customer's request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The supplier is required to perform a Cybersecurity Maturity Model Certification Level 2 self-assessment, and measuring and test equipment must be appropriately calibrated and documented. Delivery is FOB origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Cherry Point in North Carolina. The shipment must be ready by January 31, 2027, with the original delivery deadline set for April 30, 2027. All packaging, marking, and transportation must align with DLA Procurement Notes C19 and C20, and the unit of issue is strictly EA as defined in the DLA authorization. The contract is governed under solicitation SPE4A5-26-T-322P, with no variance allowed in quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
IMPELLER, PUMP, CENTRIFU
Solicitation # SPE7LX-26-U-8885
This contract is an indefinite delivery contract for the procurement of centrifugal pump impellers, identified by NSN 2910016319020 and part number 106369, under solicitation SPE7LX-26-U-8885, issued by the Defense Logistics Agency Land and Maritime’s Strategic Acquisition Program Directorate. The contract is a total small business set-aside under NAICS code 336310 with a maximum value of $350,000 and an estimated initial quantity of six units, delivered FOB origin within 88 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to MIL-P-16789 for pump packaging and preservation, MIL-STD-2073-1E for packaging practices, and MIL-STD-129 for labeling and barcoding. The impeller must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lamps, sensors, or instruments specified by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. All packaging and marking must comply with DLA-specific packaging requirements, and government-issued identification must be removed from non-accepted supplies. Payment and invoicing are required through Wide Area WorkFlow, with acceptance and inspection occurring at the destination. The contract incorporates multiple FAR and DFARS clauses, including provisions for safeguarding contractor information systems, prohibited substances like hexavalent chromium and toxic materials, subcontracting requirements for commercial products, and mandatory representations regarding small business status, UEI, and CAGE codes. Offerors must submit Safety Data Sheets for all hazardous materials per Federal Standard No. 313 and comply with OSHA’s Hazard Communication Standard. The solicitation requires adherence to strict documentation and representation protocols, including electronic submission of proposals via standard forms, and the contract is subject to deviations applied to several clauses regarding system security, contract types, and small business representation. The point of contact is Theodore Misiolek, and submissions must be received by August 4, 2026, with no option quantities or unit pricing provided in the base solicitation.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTI
Solicitation # SPE7L1-26-T-914E
This contract pertains to the supply of four fuel injection nozzles, part number 4234350 with NSN 2910-01-560-5519, to be delivered to the Marine Corps Engineer School at Camp Lejeune, North Carolina. The delivery must be completed within 20 days of award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which override any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and DLA Packaging Requirements, with palletization following RP001 guidelines, and no ozone-depleting chemicals are permitted under any circumstance. The supply must be shipped via traceable freight methods—parcel post is explicitly prohibited—and must be delivered by July 30, 2026. The contract is issued under solicitation SPE7L1-26-T-914E, with the unit of issue being each, at a total price of $4.00, and all technical specifications are governed by the DLA’s authoritative system.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-912X
The contract pertains to the procurement of O-RINGS identified by NSN 5331-01-591-0214, with a total quantity of 3 packing groups, each equivalent to 10 units, for a total of 30 units. Delivery is required within five days of award, and the purchase is linked to request number 7017727133. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revisions in effect on the solicitation issue date or award date depending on the acquisition type. For simplified acquisitions, the revision active on the solicitation issue date or award date applies, while for larger acquisitions, the RFP issue date controls unless an amendment incorporates a later revision, in which case the amendment date governs. All supplies must comply with the provision requiring removal of government identification from non-accepted items. The solicitation number is SPE7L1-26-T-912X, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 336310, and the contracting organization is the Department of Defense under the Land Supply Chain. The place of performance is FPO with ZIP 09645-0010, and the primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE, PROPORTIONAL
Solicitation # SPE4A5-26-T-322X
This contract specifies the procurement of a single proportional valve identified by NSN 4820-01-439-0288 and part number 3605239-2 from Honeywell International Inc. under solicitation SPE4A5-26-T-322X. The item is classified as a commercial item and is designated as a critical application item requiring strict adherence to technical, quality, and cybersecurity standards. All requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Packaging must comply with MIL-STD-129 and ASTM D3951, subject to precedence of DLA standards, and palletization must follow DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The contractor must comply with CMMC Level 2 self-assessment and implement physical identification marking per RQ017. Configuration changes require formal engineering change proposals and variance requests. Delivery is due within 171 days FOB origin to Hill AFB, Utah, with inspection and acceptance occurring at destination. The unit of issue is each, quantity is one, and no variance is permitted. The item must be delivered by January 31, 2027, with the original required delivery date of July 30, 2027. All transport and shipping instructions follow DLA procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9229
This contract specifies the procurement of a fluid filter element identified by NSN 2910-01-524-3009, with a quantity of 974 units, under solicitation SPE7LX-26-U-9229. The item is designated as a critical application requiring government engineering source approval and is restricted to approved manufacturers including PATRIA LAND SYSTEMS OY, WIX CORP, PARKER-HANNIFIN CORPORATION, and ROSOMAK S.A. Delivery is required within 72 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede other standards, and requires packaging in compliance with ASTM D3951 and labeling per MIL-STD-129, with palletization following RP001 guidelines. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. This is a total small business set-aside under NAICS 336310, with responses due by August 19, 2026, and the government retains full control over configuration changes, deviations, and waiver requests.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
ADJUSTING, SCREW VAL
Solicitation # SPE7MC-26-T-166J
The contract pertains to the procurement of one adjusting screw valve, identified by NSN 4820-01-486-4802 and part number B4024 from Dante Valve Company, specified as a critical application item made of copper alloy. The item must not contain or come into direct contact with mercury or mercury-containing compounds, except under strictly defined exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods and materials, with no special marking required. The item must be delivered FOB destination within 20 days, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Shipment must be via fastest traceable means, not parcel post, to the vessel shipment address USS GABRIELLE GIFFORDS LCS 10, FPO AP 96694, with specific DLA vendor procedures and transport directives applying. The contract is issued under solicitation SPE7MC-26-T-166J, with a required delivery date of July 31, 2026, and falls under NAICS code 336310, managed by the Defense Logistics Agency. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 541370
New
DIBBS
Surveying and Site Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Monitoring
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 237310
New
DIBBS
Paving and Site Access Road Construction
Highway, Street, and Bridge Construction

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238110
New
DIBBS
Concrete Formwork and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
BUMPER
Solicitation # SPE7LX-26-U-9266
The contract pertains to the procurement of 2,110 units of a bumper identified by NSN 5340-01-186-7658 under solicitation number SPE7LX-26-U-9266, with a response deadline of August 19, 2026, and a delivery requirement of 116 days after award. The acquisition is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with the NAICS code 332510 applicable to the manufacturing sector. Technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. The item contains technical data subject to export control under either ITAR or EAR, restricting its dissemination to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. The contract is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
LEVER, LOCK-RELEASE
Solicitation # SPE7LX-26-U-9243
The contract is for the procurement of 431 units of a LEVER, LOCK-RELEASE with NSN 5340-01-496-9412 under solicitation SPE7LX-26-U-9243, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The procurement is a total small business set-aside under NAICS code 332510, with responses due by August 19, 2026 and a delivery deadline of 94 days after order. The item is subject to stringent compliance requirements including CMMC Level 2 certification for any third-party assessors involved, adherence to DLA packaging and quality standards, and strict prohibition of Class I ozone-depleting chemicals in manufacturing or packaging. All technical data associated with the item is controlled under export regulations—either ITAR or EAR—and may not be disclosed to foreign persons or entities without prior authorization from the Department of State or Commerce; only contractors approved under the US/Canada Joint Certification Program, who have completed required training and questionnaire, may access this data. Covered defense information requirements apply, and all government identification must be removed from non-accepted supplies.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTA
Solicitation # SPE7LX-26-U-9232
The contract solicitation SPE7LX-26-U-9232 is for the procurement of a filter element, intake, identified by part number 87682999 and NSN 2940-01-566-5009, under an indefinite-delivery contract structure with a maximum ceiling of $350,000. The estimated quantity is 551 units, though it is explicitly noted as non-firm and subject to variation based on actual demand. Delivery is required within 74 days of contract award, with FOB Origin terms applying, meaning the contractor assumes liability and cost for transportation to a designated contiguous U.S. location. The unit of issue is each (EA), and all packaging and labeling must conform to MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Palletization must follow RP001: DLA Packaging Requirements for Procurement, and all packaging must be marked with the correct Unit of Issue and Quantity per Unit Pack as specified. Inspection and acceptance occur at the destination, under FAR 52.246-2, with the government responsible for verification upon receipt. The solicitation is set aside entirely for small businesses under FAR 19.5, with eligibility limited to entities registered as small in NAICS code 333618. Participation requires submission of a Unique Entity ID and CAGE code, and affirmative representations regarding socioeconomic status and covered telecommunications equipment must be provided. Contractors must comply with multiple FAR clauses including those pertaining to trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, safeguarding contractor information systems, and accelerated payments to small business subcontractors. The HAZARDOUS MATERIAL IDENTIFICATION AND SAFETY DATA clause mandates labeling per OSHA’s Hazard Communication Standard unless covered by an exemption under federal statutes. Invoices must be processed exclusively through Wide Area WorkFlow, and all shipments must adhere to U.S.-flag vessel compliance if transported via ocean. The point of contact for inquiries is Theodore Misiolek of the Strategic Acquisition Program Directorate, with proposals due electronically via DIBBS by August 19, 2026. No specific unit price is provided, and contract performance is contingent upon future delivery orders issued under the IDC framework.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9259
The contract is for the supply of 898 gaskets identified by NSN 5330-01-597-1377 under solicitation SPE7LX-26-U-9259, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 339991. Items must be commercial in nature, free of asbestos, and packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, as the National Stock Numbers in FSC 5330/5331 are susceptible to such damage. Delivery is required within 123 days after order, and the requirement applies to direct vendor delivery, Foreign Military Sales, and stock shipments. All supplies must comply with applicable technical and quality standards referenced in the DLA Master List, including MIL-STD-130N for identification marking and provisions for removing government identification from non-accepted supplies. The contract also incorporates cybersecurity requirements under the CMMC Level 2 Certified Third-Party Assessment Organization framework as it relates to covered defense information. Responses are due by August 19, 2026, with the solicitation posted on August 4, 2026, and primary point of contact is Theodore Misiolek at the designated DLA email and phone number.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
LOOP CLAMP KIT
Solicitation # SPE7LX-26-U-9250
The Loop Clamp Kit is a procurement item under solicitation SPE7LX-26-U-9250, issued by the Department of Defense’s Strategic Acquisition Program Directorate for a Women-Owned Small Business Set-Aside. The contract specifies a quantity of 229 kits, with each kit containing a strap and two bolts, sourced from approved suppliers including OSHKOSH DEFENSE LLC, ND DEFENSE LLC, and DANA COMMERCIAL VEHICLE MANUFACTURING, each identified by their respective part numbers. The item is tracked by NSN 5340014846511 and is to be delivered in 57 days FOB origin with no variance allowed in quantity. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, which takes precedence over industry standards; non-hazardous items must be packaged per ASTM D3951 while hazardous items require adherence to Fed-Std-313 and TQ requirement IP025. Packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 DLA packaging standards. Inspection and acceptance occur at the destination, and the unit of issue is KT (kitties). The contract includes provisions for removal of government identification from non-accepted supplies, and all documentation must align with the DLA eProcurement portal’s current requirements as of the solicitation or award date.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-8870
The contract solicitation SPE7LX-26-U-8870 seeks the supply of 34 gaskets identified by NSN 5330-01-459-0974 and part number 6K404 under a Total Small Business Set-Aside, with NAICS code 336411 and a contract value ceiling of $350,000. Delivery is required within 97 days after award, with FOB Origin terms and destination inspection and acceptance governed by FAR 52.246-2. The item is classified as a commercial item and must be asbestos-free, with any alternative materials requiring prior approval under Clause L30 and Provision 4. Packaging must conform to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, in compliance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking. Identification of the item must adhere to MIL-STD-130N, including Unique Item Identification with Data Matrix barcodes. The contract mandates compliance with CMMC Level 2 for cybersecurity, safeguarding covered defense information under DFARS 252.204-7012, and prohibits acquisition of covered defense telecommunications equipment per DFARS 252.204-7018. Contractors must submit electronic invoices via WAWF and provide a Certificate of Conformance prior to shipment. The requirement for a DLA Packaging Compliance Statement and the removal of government identification from non-accepted supplies further govern handling and documentation. The solicitation applies revisions from the DLA Master List of Technical and Quality Requirements, with technical compliance being essential for award under a Lowest Price Technically Acceptable methodology. All offerors must certify socioeconomic status as a small business and declare any joint ventures, providing UEI and CAGE codes where applicable. Provisions for employment eligibility, combating human trafficking, equal opportunity for workers with disabilities, and whistleblower protections are incorporated, along with restrictions on compensation of former DoD officials and compliance with hazardous material handling standards under DFARS 252.223-7006 and 252.223-7001. No attachments are listed, and detailed delivery locations or pricing are subject to the Schedule.
Aircraft Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details