Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

OMEPRAZOLE EXTENDED-RE

Active
SPE2DP-26-T-4416Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 20 mg extended-release omeprazole capsules in 90-count bottles, identified by NSN 6505016247068 and manufacturer part number NDC00781-2868-92 from Sandoz Inc. Each unit must be packaged in commercial-grade sealed containers that protect against damage, with outer shipping containers ensuring safe, low-cost delivery to listed government destinations under FOB destination terms. A minimum of 21 months of shelf life must remain at delivery, with a total shelf life of 24 months that is non-extendable. All packaging, labeling, and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. The product is regulated by the FDA and requires pre-award referral for confirmation. Shipments must use traceable transportation methods and explicitly prohibit parcel post. Deliveries are scheduled across multiple CLINs totaling 57 units, with a mandatory delivery window of five days and no variance allowed in quantity. All items must be labeled and stored at controlled room temperature, with packaging materials and methods governed by DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. Shipping addresses include military facilities at Fort Bragg, North Carolina, and APO AP, with required point-of-contact and program tracking information provided for government use.

General Info

20 mg extended-release omeprazole capsules, 90-count bottles, FOB destination, 21+ months shelf life, DLA packaging, FDA-regulated, military deliveries only.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSAView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

UNIT 2022 BOX, APO, AP, 96264-2022, US

Set-Aside

NONE

Documents

(1)

SPE2DP-26-T-4416.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
View Agency Profile
Office AddressUS
Contacts
Timothy Mccauley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
OMEPRAZOLE EXTENDED-RELEASE CAPSULES
OMEPRAZOLE EXTENDED-RELEASE CAPSULES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
20 MG DELAYED RELEASE CAPSULES, 90'S BOTTLE
.
U/I "BT" (90'S)
.
STORE AT CONTROLLED ROOM TEMPERATURE
.
SHELF LIFE IS 24 MONTHS. AT LEAST 21 MONTHS SHELF LIFE SHALL
REMAIN AT THE TIME OF DELIVERY TO THE FIRST GOVERNMENT
ACTIVITY
.
LABELING AND MARKING SHALL BE IN ACCORDANCE WITH
MED. MKT STD 1A DTD 2/4/2013
.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DP-26-T-4416
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
1 BT = 90 AV
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. . RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
SANDOZ INC. 0THL4 P/N NDC00781-2868-92
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017693071 0001 BT 1.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
SPE2DP-26-T-4416
SECTION B
PR: 7017693071 PRLI: 0001 CONT’D
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FY2961
FY2961 8 MDSS SGSM
UNIT 2022 BOX
APO AP 96264-2022
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
FY2961
FY2961 8 MDSS SGSM
CP 01101182634704242
KUNSAN AB BLDG 421
GUNSAN CITY 54168
KR
M/F: (TCN) FM529462110022
RDD:
PROJ: TP 1
SUPP ADD: FY2961 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: ADV: 2A FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017699724 0001 BT 1.000
SPE2DP-26-T-4416
SECTION B
PR: 7017699724 PRLI: 0001 CONT’D
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.
SPE2DP-26-T-4416
SECTION B
PR: 7017699724 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W50YF2
0051 MD CO MEDICAL LOGISTI
AWCF SSF
BLD A5474 PRATT ST
FORT BRAGG NC 28310
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W50YF2
0051 MD CO MEDICAL LOGISTI
AWCF SSF
BLD A5474 PRATT ST
FORT BRAGG NC 28310
US
MARKFOR
W50YF2
0051 MD CO MEDICAL LOGISTI
AWCF SSF
BLD A5474 PRATT ST
FORT BRAGG NC 28310
US
M/F: (TCN) W50YF262030038
RDD: 217
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017699582 0001 BT 4.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
SPE2DP-26-T-4416
SECTION B
PR: 7017699582 PRLI: 0001 CONT’D
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE2DP-26-T-4416
SECTION B
PR: 7017699582 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62030148
RDD: 217
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE2DP-26-T-4416
SECTION B
PR: 7017699743 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017699743 0001 BT 10.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
SPE2DP-26-T-4416
SECTION B
PR: 7017699743 PRLI: 0001 CONT’D
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
SPE2DP-26-T-4416
SECTION B
PR: 7017699743 PRLI: 0001 CONT’D
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62030155
RDD: 217
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7017699747 0001 BT 30.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
SPE2DP-26-T-4416
SECTION B
PR: 7017699747 PRLI: 0001 CONT’D
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
SPE2DP-26-T-4416
SECTION B
PR: 7017699747 PRLI: 0001 CONT’D
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62030149
RDD: 217
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DP-26-T-4416
SECTION B
PR: 7017699749 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0006 7017699749 0001 BT 2.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
SPE2DP-26-T-4416
SECTION B
PR: 7017699749 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE2DP-26-T-4416
SECTION B
PR: 7017699749 PRLI: 0001 CONT’D
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62030150
RDD: 217
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0007 7017699723 0001 BT 2.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
SPE2DP-26-T-4416
SECTION B
PR: 7017699723 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
SPE2DP-26-T-4416
SECTION B
PR: 7017699723 PRLI: 0001 CONT’D
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
SPE2DP-26-T-4416
SECTION B
PR: 7017699723 PRLI: 0001 CONT’D
as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62030154
RDD: 217
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0008 7017699722 0001 BT 1.000
NSN/MATERIAL:6505016247068
SPE2DP-26-T-4416
SECTION B
PR: 7017699722 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE2DP-26-T-4416
SECTION B
PR: 7017699722 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE2DP-26-T-4416
SECTION B
PR: 7017699722 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62030151
RDD: 217
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE2DP-26-T-4416
SECTION B
PR: 7017699722 PRLI: 0001 CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0009 7017699742 0001 BT 1.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DP-26-T-4416
SECTION B
PR: 7017699742 PRLI: 0001 CONT’D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
SPE2DP-26-T-4416
SECTION B
PR: 7017699742 PRLI: 0001 CONT’D
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SPE2DP-26-T-4416
SECTION B
PR: 7017699742 PRLI: 0001 CONT’D
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62030152
RDD: 217
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0010 7017699721 0001 BT 5.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
SPE2DP-26-T-4416
SECTION B
PR: 7017699721 PRLI: 0001 CONT’D
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE2DP-26-T-4416
SECTION B
PR: 7017699721 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE2DP-26-T-4416
SECTION B
PR: 7017699721 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
SPE2DP-26-T-4416
SECTION B
PR: 7017699721 PRLI: 0001 CONT’D
US
M/F: (TCN) W8002S62030153
RDD: 217
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026

SPE2DP-26-T-4416 NSN/Part Number: 6505-01-624-7068 Quantity: 1 BT Purchase Request: 7017699742QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
SURGICAL PACK, DISPOSAB
Solicitation # SPE2DH-26-T-5695
The contract specifies the procurement of a disposable surgical pack containing one drape towel with adhesive, one lithotomy sheet with attached legging, two absorbent towels, and one reinforced plastic outer wrap or table cover measuring 44 inches by 90 inches, all packaged as a unit of issue consisting of ten each per package. Two such packages are required under purchase request 7017656189 for delivery within 20 days of award. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a container that safeguards contents from damage and breakage, and shipped in robust exterior containers suitable for safe delivery by common carriers at the lowest possible rate to the specified delivery point in APO, 09094-3219. Marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The solicitation is governed by DLA Packaging Requirements and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. This is a federal solicitation under NAICS code 423450 issued by the Department of Defense’s Medical Supply Chain FSH, with responses due by August 10, 2026, and technical inquiries directed to Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SODIUM CHLORIDE INJ
Solicitation # SPE2DP-26-T-4446
Sodium Chloride Injection in 10 mL disposable syringes, preservative-free and latex-free, is being procured under contract SPE2DP-26-T-4446 with a total quantity of 2 packing groups, each containing 30 syringes for a total of 60 units. The product is regulated by the FDA and must comply with all applicable DLA Master List of Technical and Quality Requirements, including medical packaging and marking standards as defined in Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to prevent damage or breakage, and placed in exterior shipping containers suitable for safe transport at the lowest carrier rate to the designated delivery point. The item has a non-extendable shelf life of 24 months and must be labeled accordingly. Delivery is FOB destination within 20 days of award, with no tolerance for quantity variance. Freight must be shipped by traceable means, excluding parcel post, to the specified delivery location at Watervliet Arsenal, New York. The supplier, AmerisourceBergen Drug Corp with part number 106346, must adhere to all applicable hazardous material guidelines under Fed-Std-313 and ASTM D3951 where relevant, though DLA requirements override any conflicting standards. All packaging, labeling, and palletization must conform to RP001 and the latest DLA packaging directives.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TABLE, SURGICAL INST
Solicitation # SPE2DH-26-T-5733
The contract specifies the procurement of two surgical anesthesia utility tables, each with a single drawer made of stainless steel, rectangular in shape, measuring 20 inches in width, 16 inches in depth, and 34 inches in height, equipped with 3-inch wheel casters. These units are destined for federal medical use under the NSN 6530-00-710-0220 and must be delivered within 170 days of award. Packaging requirements are strictly defined: each unit must be sealed in a commercial container that prevents damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe transport at the lowest cost to the delivery point in New Cumberland, PA. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly indicate the source and part number being supplied. The contract references DLA’s Master List of Technical and Quality Requirements, indicating adherence to specific technical and quality criteria identified by R or I numbers, and incorporates DLA’s packaging guidelines. Government identification must be removed from non-accepted supplies, and all bids must respond to the solicitation number SPE2DH-26-T-5733 with full compliance to the stated procurement rules and deadlines.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TOLNAFTATE CREAM
Solicitation # SPE2DP-26-T-4443
Tolnaftate Cream USP, a 1% weight/weight topical antifungal cream, is being procured in 15-gram tubes (TU), with a total quantity of 18 tubes required for delivery. The product has a 36-month shelf life, and at the time of receipt by the first government activity, a minimum of 31 months of remaining shelf life must be guaranteed. It must be stored at controlled room temperature between 20–25°C (68–77°F), with allowable excursions permitted between 15–30°C (59–86°F) in accordance with USP standards. The manufacturer is Taro Pharmaceuticals U.S.A., Inc., identified by NDC 51672-2020-01, and the item is regulated by the FDA, requiring confirmation through the EBS referral process. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be commercially packaged in sealed unit containers suitable for protection against damage, with exterior shipping containers ensuring safe, cost-effective delivery. All packaging and labeling must adhere to DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. The product is not considered hazardous under FED-STD-313 and must be shipped via the fastest traceable means, excluding parcel post, to Fort Lewis, WA, with a required delivery within five days of the award. The contract specifies zero variance in quantity, destination FOB delivery, and inspection and acceptance at the delivery point. The NSN is 6505-01-571-5622, and the solicitation number is SPE2DP-26-T-4443, with a response deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOH
Solicitation # SPE2DH-26-T-5714
The contract specifies the procurement of heavy-duty, puncture-resistant biohazard disposal bags colored red or orange to indicate contamination, designed for autoclaving biologically contaminated materials such as culture dishes prior to disposal. Each package contains 200 units, with the unit of issue listed as a package. The items must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to commercial standards as specified in the procurement document, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1. Each unit must be sealed in a container that prevents damage or breakage, and shipments must be packed in commercial exterior containers capable of safe delivery via common carriers at the lowest cost to the designated delivery point. Marking must follow Medical Marking Standard No. 1, and all packaging and handling must meet MIL-STD-2073-1E specifications. The contract calls for delivery of one package within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occurring at the delivery point. The solicitation number is SPE2DH-26-T-5714, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
METER, CONDUCTIVITY
Solicitation # SPE2DH-26-T-5700
A portable conductivity meter with solid-state construction and built-in electrodes is being procured under solicitation SPE2DH-26-T-5700, with a requirement for three units. The device measures 3 inches wide, 5 inches in diameter, and 4 inches high, and includes a carrying case for transport and field use. It is designed for testing water purified through deionization, osmosis, boiler systems, and highly saline wastewater. The procurement is governed by technical and quality requirements from the DLA Master List, with applicable revisions determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The unit of issue is each, and bidders must clearly identify the source and part number being offered. The NSN is 6630-01-188-5368, with a delivery deadline of 20 days after award. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The contracting activity falls under the Department of Defense, Medical Supply Chain FSH, with performance to be delivered to FPO, ZIP 96678, and primary point of contact is Tina Vu via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SHORTS, EXAM
Solicitation # SPE2DH-26-T-5726
The contract is for disposable, latex-free exam shorts in dark blue, made from non-woven material with a sewn-in elastic waistband that expands from 22 to 48 inches to accommodate most patients. Each unit is sold in a package of 50, with the unit of issue defined as one package. All packaging must comply with commercial standards and meet the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper identification and handling throughout the supply chain. Units must be sealed in protective containers and packed in suitable exterior shipping containers to ensure safe delivery at the lowest carrier rate to the designated point of performance at Edwards AFB, California. The material must be marked according to MMS No. 1, and full compliance with DLA packaging requirements is mandatory. This acquisition falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH, with the solicitation number SPE2DH-26-T-5726, issued on August 2, 2026, and requiring responses by August 10, 2026. Delivery is due within 20 days after award, and the item is identified by NSN 6532-01-532-8007. Technical and quality requirements are governed by the DLA Master List, and removal of government identification from non-accepted supplies is regulated under RQ011. Contact for inquiries is Tina Vu at Tina.Vu@dla.mil.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TRIAMCINOLONE ACETO
Solicitation # SPE2DP-26-T-4442
Triamcinolone acetonide cream USP 0.1% is a prescription-only topical medication supplied in 80-gram tubes, with a total shelf life of 36 months and a requirement that at least 31 months of shelf life remain upon receipt by the first government activity. It must be stored at controlled room temperature between 20–25°C (68–77°F), with allowable excursions between 15–30°C (59–86°F) in accordance with USP standards. The product is subject to stringent FDA regulation and must comply with all DLA Master List of Technical and Quality Requirements, including packaging and labeling standards per Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be commercially packaged in sealed containers to prevent damage, and bulk shipments must be palletized per DLA procurement guidelines. The item is regulated as a Type I (Code Q) drug with a non-extendable 36-month shelf life, and all packaging must be marked in accordance with applicable defense information and hazardous material requirements if applicable. The contract specifies delivery of 16 tubes to Fort Lewis, Washington, with a required delivery date of August 4, 2026, within five days of shipment, using the fastest traceable means excluding parcel post. Supplier information includes NDC codes for Sandoz, Tarro Pharmaceuticals, and AmerisourceBergen, and the unit of issue is a tube (TU). Pricing is fixed at $16.00 per tube with zero variance allowed in quantity.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
DISPOSAL CONTAINER, HYP
Solicitation # SPE2DH-26-T-5713
The contract specifies the procurement of a puncture-resistant, autoclavable, red plastic disposal container designed for single-use hypodermic needles and syringes, with a nominal capacity of 3.3 quarts and featuring a one-way valve and venting system, clearly labeled with the infectious waste symbol and cautionary legends. Each unit must be commercially packaged in a sealed inner container to prevent damage or breakage and shipped in suitable exterior containers that ensure safe, cost-effective delivery via common carrier to the designated destination, adhering to the Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. The packaging and marking requirements are strictly defined, and the item must be labeled in compliance with these standards, with guidance accessible through DLA Troop Support. The unit of issue is one PG, equivalent to 24 units, and the item is identified by NSN 6530-01-188-5345 and manufacturer part number 305488 from Becton, Dickinson and Co. Delivery is required within 20 days FOB destination, with no quantity variance permitted, and inspection and acceptance occur upon arrival. The product is regulated by the FDA, and buyers must submit a referral through EBS for confirmation prior to award. The sourcing is governed by DLA packaging requirements and technical standards outlined in the DLA Master List of Technical and Quality Requirements, and the contract is governed by covered defense information protocols. The delivery point is Fort Hood, Texas, with the point of contact for inquiries being Tina Vu of the Department of Defense Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
Supply of Tuberculin (PPD) for Tuberculosis Testing
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423450
New
International
Supply of Sickle Cell Diagnostic ReagentsThe contract encompasses the procurement and delivery of specialized medical reagents required for sickle cell disease testing at the Sickle Cell Laboratory in Mandeville, Jamaica. The scope includes full packaging and labeling of reagents in compliance with established diagnostic standards to ensure accuracy, safety, and regulatory adherence in clinical testing environments. All materials must be suitable for routine use in a laboratory setting and meet the technical and quality benchmarks necessary for reliable diagnosis of sickle cell conditions. The supplier is responsible for end-to-end fulfillment including transportation and documentation to guarantee timely and defect-free delivery. The contract is classified as a subcontract under NAICS code 423450, indicating it relates to medical and dental equipment and supplies merchant wholesaling. It is issued by the Southern Regional Health Authority, operating under the Government of Jamaica, with performance required exclusively at the designated laboratory in Mandeville. The posting date indicates this opportunity was made public in July 2026, though no solicitation number is listed. There is no set-aside designation or details provided regarding eligibility criteria or point of contact, and the agreement underscores the importance of reliability and regulatory compliance in supporting national public health initiatives for sickle cell disease screening and management.
Southern Regional Health Authority

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4251
OMEPRAZOLE EXTENDED-RELEASE CAPSULES, 20 MG DELAYED RELEASE, in 90-count bottles, are being procured under solicitation SPE2DP-26-T-4251 by the Department of Defense’s Medical Supply Chain Pharm FSA. The item is regulated by the FDA and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over all other packaging standards. Each unit is defined by the unit of issue “BT,” representing 90 capsules per bottle, with all deliveries required to have at least 21 months of remaining shelf life out of a 24-month total shelf life, non-extendable. Packaging must protect against damage and be commercially sealed, with exterior shipping containers suitable for safe transport via common carrier at lowest cost. Palletization must adhere to RP001 DLA Packaging Requirements, and all labeling and marking must follow MIL-STD-129 as the governing standard, superseding references to MIL-STD-129. Markings must include Unit of Issue, Quantity per Unit Pack, freight and mark-for addresses, and traceable identifiers. Parcel post is explicitly prohibited, and shipments must be sent via the fastest traceable means. All items are to be delivered FOB destination within five days of award, with delivery points at Fort Stewart, GA, and Fort Campbell, KY. The contract includes five CLINs totaling 15 BT (1,350 capsules), with no variance allowed in quantity. The drug is supplied by Sandoz Inc., with NDC 00781-2868-92. Technical compliance is enforced through the DLA Master List, which governs all quality and packaging specifications. The product is non-hazardous under FED-STD-313 and must conform to ASTM D3951 for commercial packaging, unless a deviation applies, in which case TQ IP025 governs. All contractors must comply with FAR/DFARS clauses requiring cybersecurity protections under 252.204-7012 and NIST SP 800-171, safeguarding covered defense information and reporting cyber incidents. Contractors must also adhere to whistleblower protections, trafficking in persons prohibitions, employment verification requirements, and sustainable product preferences. Proposal submissions are exclusively through the DLA Internet Bid Board System (DIBBS) by the deadline of July 29, 20
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

Same awarding agency

NAICS: 325412
New
DIBBS
ALUMINUM HYDROXIDE GEL
Solicitation # SPE2DP-26-T-4441
ALUMINUM HYDROXIDE GEL, USP, is procured under solicitation SPE2DP-26-T-4441 with a unit of issue as one bottle (1 BT or 16 OZ), requiring compliance with DLA’s Medical Marking Standard No. 1 and labeling per MMS No. 1A dated February 4, 2013, superseding MIL-STD-129. The product must have a mandatory 24-month shelf life, with no less than 21 months remaining from the date of manufacture to the date of government delivery. Packaging must meet commercial standards, ensuring each unit is sealed and protected against damage, and shipped in exterior containers suitable for safe transport via common carrier at the lowest cost to the destination specified in the contract. All items must be marked in accordance with DLA’s Medical Marking Standard, including NSN, manufacturer and CAGE code, date of manufacture, expiration date, contract number, and lot number. The item is regulated by the FDA, requiring referral via EBS to a product specialist before award, and must be accompanied by the manufacturer’s part number NDC00536-0091-85 from Watson Pharma Inc., with CAGE code 1DWF9. Delivery is FOB destination within 20 days, with zero variance in quantity and inspection and acceptance occurring at point of delivery. Packaging must conform to MIL-STD-2073-1E, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 424210
New
DIBBS
SODIUM CHLORIDE INJECT
Solicitation # SPE2DP-26-T-4397
Sodium Chloride Injection USP 0.9% in 1000ml plastic bags, latex free, is being procured under solicitation SPE2DP-26-T-4397 with a unit of issue defined as one package of twelve units. The product must comply with strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements and must adhere to Medical Marking Standard No. 1, superseding all references to MIL-STD-129. Packaging must be commercial-grade, sealed, and designed to protect against damage and breakage, with exterior shipping containers ensuring safe and cost-effective delivery to the destination point. The item is regulated by the FDA and has a non-extendable shelf life of 30 months, with storage required at controlled room temperature between 20°C and 25°C, protection from excessive heat and freezing, and segregation from incompatible materials. The sole approved manufacturer is B. Braun Medical Inc with part number NDC00264-5802-00, though other vendors may submit bids under their respective part numbers. The contract specifies a firm quantity of twelve units per package, with zero variance permitted, and requires delivery within five days FOB destination to Carville, LA 70721. Inspection and acceptance occur at the delivery point. All markings, documentation, and compliance must align with current DLA standards, and buyers must refer specific bidder and manufacturer details to the DLA product specialist via EBS for confirmation prior to award.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325411
New
DIBBS
PSYLLIUM HYDROPHILIC M
Solicitation # SPE2DP-26-T-4405
The contract is for the procurement of Psyllium Hydrophilic Mucilloid in 12-gram packets, each containing 25 mg of potassium and 5 mg of sodium, packaged in units of 30 packets per case. This product is regulated by the FDA and must be supplied with its manufacturer’s part number NDC37000-0740-87, sourced from Procter & Gamble Distributing LLC. The item has a non-extendable shelf life of 24 months and must comply with DLA’s technical and quality requirements as defined in the DLA Master List, with packaging and marking strictly governed by Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Packaging must meet MIL-STD-2073-1E and DLA-specific packaging requirements, ensuring secure, commercial-grade containment capable of protecting contents during transit. Delivery is FOB destination with no tolerance for quantity variance, and items must be shipped within five days of contract award using the fastest traceable means—parcel post is prohibited. The delivery address is a Navy vessel in FPO AP 96675, with specific shipping and marking instructions governed by DLA’s logistics protocols. The NSN is 6505-01-719-3181, and the contract number is SPE2DP-26-T-4405, with an original required delivery date of August 4, 2026. All bids must include the supplier and manufacturer details for FDA referral through EBS prior to award.
Medicinal and Botanical Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
HYDROGEN PEROXIDE TOPI
Solicitation # SPE2DP-26-T-4396
Hydrogen Peroxide Topical Solution, USP, is a 3% stabilized topical solution intended for external use only, with clear warnings against use in the eyes or over large body areas and a maximum usage duration of one week. Each unit is a 473-milliliter (16-fluid-ounce) bottle, requiring tight closure, storage at controlled room temperature, protection from freezing and excessive heat, and no shaking. Packaging and labeling must comply with Medical Marking Standard No. 1A dated February 4, 2013, superseding MIL-STD-129, and all units must be sealed in commercial containers suitable for transit and protected from damage. The product is regulated by the FDA and classified as a Type I (Code M) item with a non-extendable shelf life of 24 months. Suppliers must provide Safety Data Sheets (SDS) conforming to 29 C.F.R. 1910.1200 and Hazard Communication Standard (HCS) compliant labels as of June 1, 2015, and must train employees on these requirements. All packaging and shipping must meet commercial standards and ensure safe delivery at the lowest cost to the destination. The item is identified by NSN 6505-00-153-8480, with a purchase request number of 7017684184 and a quantity of 20 bottles. Delivery is FOB destination within 20 days, with zero variance allowed. Solicitation number SPE2DP-26-T-4396, posted August 2, 2026, requires response by August 10, 2026. Approved manufacturers include McKesson, Cardinal Health, and Medline Industries. The contract is administered by the Department of Defense’s Medical Supply Chain, with delivery to Pineville, LA, and point of contact Patrell Postell. All requisitions previously associated with DMLIIS Request ID 1721935 under ACC-L have been canceled without replacement, transitioning to ACCY.
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
LUBRICANT, SURGICAL
Solicitation # SPE2DP-26-T-4417
The contract is for surgical lubricant, a sterile, latex-free, water-soluble jelly containing parabens, with each foil packet containing 2.7 grams and packaged in boxes of 144 packets as the unit of issue. The product must comply with strict technical and quality requirements outlined in the DLA Master List, and all packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item has a non-extendable shelf life of 36 months and must be stored at 20°C to 25°C (68°F to 77°F). It is regulated by the FDA and classified as a TYPE I (CODE Q) item with specific shelf-life controls. The supplier, MEDLINE INDUSTRIES, LP, must provide the item under part number MDS032273H, and the NSN is 6505-01-626-5774. The contract requires delivery of one box within 20 days to a designated military destination, with FOB destination terms and zero variance permitted on quantity. All packaging must be commercial-grade, sealed, and designed for safe transit with minimal cost to ensure unharmed delivery. The item must be marked according to MMS No. 1, and transportation details are governed by DLAD procedural notes. The contract is issued under solicitation SPE2DP-26-T-4417 with a required delivery date of August 4, 2026, and the point of contact is Nicholas Quigley of the Department of Defense’s Medical Supply Chain.
All Other Health and Personal Care Retailers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
DIBUCAINE OINTMENT
Solicitation # SPE2DP-26-T-4418
Dibucaine Ointment USP is a topical pharmaceutical product containing 1 percent dibucaine as the active ingredient, formulated for rectal administration and external use only. It is supplied in a collapsible tube and includes a rectal applicator, with each unit of issue being a single package containing one ounce or 28 grams of ointment. The product must be stored at temperatures between 15 and 30 degrees Celsius (59 to 86 degrees Fahrenheit) and carries a non-extendable shelf life of 36 months, classified as a TYPE I (CODE Q) item. Packaging and marking must comply with the latest edition of the Medical Marking Standard No. 1 and MIL-STD-2073-1E, ensuring proper government logistics handling. The item is regulated by the FDA, and procurement requires a referral through EBS to verify compliance before award. This product is procured under solicitation SPE2DP-26-T-4418 with a required delivery within five days to Offutt AFB, zip 68113-1044, under FOB destination terms. Quantity is fixed at one package (PG) with zero variance allowed, and inspection and acceptance occur at the delivery point. The National Stock Number is 6505-00-299-9535, and the NDC code is 00536-1211-95. The supplier is The Harvard Drug Group, L.L.C., and the procurement is managed by the Department of Defense’s Medical Supply Chain Pharmacy FSA. Contract data specifies a response deadline of August 10, 2026, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. Covered Defense Information may apply under RD003, and removal of government identification from non-accepted supplies is required per RQ011.
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325411
New
DIBBS
SUMATRIPTAN SUCCINATE
Solicitation # SPE2DP-26-T-4415
Sumatriptan Succinate Tablets, 100 mg, are supplied in a bottle of nine tablets and are indicated for the acute treatment of migraine with or without aura in adults. The product must be stored at controlled room temperature between 20 to 25°C (68 to 77°F) and protected from light, in compliance with USP standards. The item is regulated by the FDA and subject to strict shelf-life requirements: it has a non-extendable shelf life of 24 months as a Type I CODE M item, and must be marked according to the latest edition of Medical Marking Standard No. 1 and MIL-STD-129 for packaging and labeling. Packaging and palletization must adhere to DLA’s Packaging Requirements for Procurement and MIL-STD-2073-1E, with no tolerance for quantity variance. The contract specifies delivery FOB destination within 20 days, with inspection and acceptance occurring at the destination. The supplier is identified as MYLAN PHARMACEUTICALS INC with NDC 00378-5632-59, and the item is procured under NSN 6505-01-727-8704. Delivery is to a U.S. military address in APO AE 09094-3219, with freight originating from Ramstein, Germany. The solicitation number is SPE2DP-26-T-4415, with a required delivery date of August 4, 2026, and bid responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List, and the contracting official must submit a referral through EBS for FDA product validation prior to award.
Medicinal and Botanical Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
PETROLATUM, WHITE
Solicitation # SPE2DP-26-T-4447
The contract specifies the procurement of Petrolatum, White, USP, with a unit of issue of 1 TU equaling 28 mg, and a total quantity of 1 TU required. The item has a non-extendable shelf life of 36 months and must be packaged in accordance with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must ensure protection against damage and compliance with commercial shipping standards for safe delivery to the destination. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged per ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Labeling and marking of all containers must strictly follow the latest edition of Medical Marking Standard No. 1, and packaging must be palletized per RP001, using the designated unit pack configuration and ensuring the lowest freight cost to the specified delivery point. Delivery is required within five days of award, FOB destination, with zero variance allowed in quantity, and inspection and acceptance occur upon arrival. The item is to be shipped by the fastest traceable means, excluding parcel post, to the government address in Morrisville, NC, with explicit instructions to avoid using outdated or non-compliant marking systems. The solicitation is issued under contract SPE2DP-26-T-4447, with a required delivery date of August 4, 2026, and the item is identified by NSN 6505-00-254-5527 and NDC 53329-0068-01, supplied by Medline Industries, LP.
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4402
Omeprazole extended-release capsules, 20 mg in 30-count units, are procured under solicitation SPE2DP-26-T-4402 for government use with a total requirement of 23,000 units across multiple contract line items. Each unit must be packaged in sealed containers that protect against damage and shipped in commercial exterior containers to ensure safe, low-cost delivery to designated government destinations. The product must be stored at controlled room temperature between 20 and 25 degrees Celsius and carries a non-extendable shelf life of 18 months. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and conform to DLA packaging requirements including palletization and hazardous material handling per Fed-Std-313 and ASTM D3951 where applicable. The item is regulated by the FDA and requires supplier verification through EBS referral. Shipments must be sent by traceable means only, excluding parcel post, and deliveries are required FOB destination within five days of ship date. The original required delivery date for all orders is no later than August 4, 2026, with one contract line due by July 30, 2026. The contract includes multiple delivery addresses across Fort Lewis, Washington, and Watervliet Arsenal, New York, with strict adherence to unit of issue and quantity per unit pack specifications. The sole source manufacturers listed include Astra Pharmaceutical Products Inc, Sandoz Inc, Amerisource Health Services LLC, and Golden State Medical Supply Inc, with NDC numbers specified for each.
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
PERMETHRIN CREAM RINSE
Solicitation # SPE2DP-26-T-4404
Permethrin Cream Rinse is a 1% w/v topical pharmaceutical product packaged in a 2 fluid ounce plastic squeeze bottle, each unit including a comb for application. The product has a 24-month shelf life, with a mandatory minimum of 21 months remaining at the time of receipt by the first government activity. It is regulated by the FDA and subject to strict medical acquisition standards, including commercial packaging requirements that ensure the unit is sealed and protected from damage, and shipments are placed in suitable exterior containers for safe transport at the lowest carrier rate. All items must be marked in compliance with Medical Marking Standard No. 1, replacing all references to MIL-STD-129. The product is hazardous and requires compliance with Federal Standard No. 313-E, mandating submission of current Safety Data Sheets (SDS) formatted per 29 C.F.R. 1910.1200 and appropriate Hazard Communication Standard labels prior to award. Each shipment must include a physical copy of the SDS, and suppliers must submit these documents to DLA.MSDS@DLA.MIL with a completed cover sheet. Packaging must meet 49 CFR and ICAO regulations for hazardous materials. Technical and quality requirements are governed by the DLA Master List, and the procurement is subject to Hazard Communication Standard updates. The NSN is 6505-01-256-4972, and the solicitation requires delivery of five units within five days of award, with the contract issued under SPE2DP-26-T-4404 by the Department of Defense, Medical Supply Chain Pharm FSA.
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
ALBUTEROL SULFATE INHA
Solicitation # SPE2DP-26-T-4437
Albuterol Sulfate Inhalation Aerosol with HFA is a prescription-only medication for oral inhalation, with each actuation delivering 108 micrograms of albuterol sulfate equivalent to 90 micrograms of albuterol base, supplied in an 8.5-gram canister containing 200 metered doses. The product must be stored at room temperature between 59°F and 77°F, protected from extreme heat or cold, and must not be punctured, exposed to flames, or stored near heat sources, as temperatures above 120°F may cause the canister to burst. It is subject to a non-extendable 24-month shelf life and must be labeled with the National Stock Number, manufacturer name, date of manufacture, expiration date, contract number, and lot number. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be shipped in sealed commercial unit containers and approved shipping containers suitable for safe transport at the lowest rate to the delivery point specified. The product is regulated by the FDA and requires submission of Safety Data Sheets and Hazard Communication Standard-compliant labels as mandated by OSHA’s Globally Harmonized System, with supplier training on these requirements. Delivery is FOB destination within five days, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The contract is issued under solicitation SPE2DP-26-T-4437 for a quantity of 12 units, with the National Stock Number 6505015436562, and references applicable DLA technical and quality requirements contained in the DLA Master List.
Pharmaceutical Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details