Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

On-Site Equipment Installation and Calibration Services

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for professional on-site installation, leveling, 220V electrical connection, and operational testing of cardiovascular equipment across multiple facilities under the Kentucky Department of Corrections. All work must be performed in accordance with manufacturer specifications and safety standards, ensuring that each unit is properly configured, electrically connected, and fully functional before handover. The scope includes calibration and verification procedures to confirm accurate operation, with the expectation that all equipment will be ready for immediate clinical use upon completion. Technicians are required to coordinate logistics and access across various correctional campuses, adhering to strict institutional protocols and security requirements. The solicitation is classified as a subcontract under NAICS code 811212 and is open for responses until August 7, 2026 at 5:30 PM. While no specific city is designated for performance, work must be conducted at multiple Department of Corrections locations throughout Kentucky. Interested parties must submit proposals by the stated deadline to be considered, and all installations must comply with state and federal guidelines for medical equipment in correctional healthcare environments. The contract does not specify a set-aside status, and bidders are expected to demonstrate proven experience in healthcare equipment installation within secure institutional settings.

General Info

Install and test cardiovascular equipment at Kentucky DOC facilities with 220V connections, per manufacturer and safety standards.

Agency

Kentucky → Department of CorrectionsView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Other, KY, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyKentucky → Department of Corrections
ContactsNo contacts available
OfficeN/A
Organization / Agency
Kentucky → Department of Corrections
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Professional installation, leveling, 220V electrical connection, and operational testing of cardiovascular equipment across multiple KY DOC facilities.

Similar Contracts

Same NAICS industry code

NAICS: 811212
New
DIBBS
Military Marking, Labeling, and BarcodingThis contract requires the application of MIL-STD-129 compliant markings, barcoding, and hazardous material labels to shipments destined for DLA Anniston, ensuring full adherence to Department of Defense packaging and labeling standards. All work must be performed to meet strict military specifications for inventory tracking, logistics efficiency, and safety compliance, particularly concerning the handling and identification of hazardous materials. The place of performance is designated as Anniston, Alabama, with the zip code 36201-4199, indicating that the contractor must be prepared to align operations with the requirements of this specific military logistics hub. The contract is classified as a subcontract under NAICS code 811212, which corresponds to commercial and industrial machinery and equipment repair and maintenance, suggesting the work involves specialized labeling and marking services rather than manufacturing or procurement. The solicitation was posted on July 30, 2026, with a required response deadline of August 10, 2026, and is managed by the LAND SUPPLIER OPNS ENGINES under the Department of Defense. While no set-aside details or point of contact information are provided, contractors must ensure their capabilities fully align with military regulatory frameworks, including precise barcoding and hazardous material documentation, to qualify and perform successfully under this agreement.
LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 811212
New
DIBBS
Quality Assurance and Inspection ServicesThe contract requires performance of quality assurance and inspection services in accordance with MIL-STD-1916 and ASQ Z1.4 standards to ensure compliance with military quality requirements. Key responsibilities include conducting thorough inspections of materials and products, preparing Certificates of Quality Control, and providing direct support during government inspections at the designated destination location. The work must be executed to meet stringent defense quality protocols, with all documentation and procedures aligned with federal standards to facilitate acceptance by government authorities. The place of performance is specified as Tracy, California, with a zip code of 95304-5000, indicating the physical location where the services will occur. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, and classified under NAICS code 811212, which pertains to other commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, allowing interested parties a brief window to submit proposals. The contract does not specify a set-aside type or organization type, and no point of contact information is provided, suggesting that all inquiries should be directed through the official DIBBS portal linked in the posting. Participation requires compliance with all applicable defense quality systems and the ability to support inspection activities on-site at the destination.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Kentucky → Department of Corrections

Same awarding agency

NAICS: 326299
New
SLED
Cardio Floor Protection Mats SupplyThe contract calls for the supply of industrial-grade, non-slip, moisture-resistant cardio floor protection mats designed specifically to safeguard flooring in correctional facilities from damage caused by heavy fitness equipment used in inmate exercise programs. These mats must meet stringent durability standards to withstand constant heavy use, resist water and sweat absorption, and provide reliable traction under wet or high-traffic conditions, ensuring both facility integrity and user safety. The products must be suitable for long-term use in institutional environments where maintenance access is limited and resilience is critical. The solicitation is issued as a subcontract under the Department of Corrections in Kentucky, with a response deadline of August 7, 2026, and was posted on July 31, 2026. The North American Industry Classification System code 326299 identifies the work as pertaining to other rubber product manufacturing, indicating the mats are custom-engineered rubber composites rather than standard commercial products. Performance of the contract is expected to occur across multiple correctional facilities within the state, with no specific location designated other than “Other.” Interested vendors must submit proposals through the Kentucky Advantage 4 portal prior to the deadline, and all materials must comply with the functional and safety requirements outlined in the procurement without explicit set-aside provisions for small or disadvantaged businesses.
All Other Rubber Product Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
SLED
Stair Climber Machine Supply and InstallationThe contract calls for the supply and installation of commercial-grade stair climbers specifically engineered for heavy-duty use in correctional facility fitness programs, emphasizing durability and reliability under constant operational demand. These machines are intended for institutional environments where equipment must withstand prolonged, high-intensity usage by a large number of users, with construction and components selected to meet the unique challenges of secure and high-traffic settings. The requirement is structured as a subcontract under the Kentucky Department of Corrections, with the place of performance listed as other locations within the state, indicating deployment across multiple state correctional facilities. Bids must be submitted by August 7, 2026, and the solicitation falls under the NAICS code 339112, which corresponds to the manufacturing of miscellaneous athletic and gymnastic equipment, highlighting the expectation that suppliers have the technical expertise to deliver industrial-strength fitness equipment. There is no set-aside designation specified, meaning the contract is open to all qualified respondents, and all proposed solutions must meet the operational standards required for secure correctional environments. The contract does not list a point of contact or detailed office address, but interested parties can access further information through the provided Kentucky state procurement portal link.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
SLED
Recumbent Bike Supply and InstallationThe contract seeks the procurement and installation of durable, ADA-compliant recumbent bikes designed for high-traffic use in correctional facility fitness centers under the jurisdiction of the Kentucky Department of Corrections. The equipment must meet strict durability standards to withstand frequent use by inmates while ensuring accessibility and safety in alignment with the Americans with Disabilities Act. Delivery and installation are required at multiple facilities across the state, with performance expected to support long-term operational needs in a secure and high-demand environment. The solicitation is classified as a subcontract with a NAICS code of 339112, indicating it relates to the manufacturing of sport and gym equipment. Responses must be submitted by the deadline of August 7, 2026, at 5:30 PM Eastern Time, with the opportunity formally posted on July 31, 2026. All equipment must be delivered and installed in accordance with facility-specific requirements, though exact locations are listed generically as “Other” within Kentucky. The contract emphasizes compliance with accessibility regulations, robust construction for heavy usage, and suitability for institutional settings. No set-aside provisions are specified, and the procurement process is managed through the Kentucky Vendor Self-Service portal, with no designated point of contact listed in the provided data.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details