Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

On-Site Helicopter Maintenance and Inspection Services

Active

State & Local

Response Deadline08/13/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses comprehensive on-site maintenance and inspection services for helicopters operating at the Pomona Police Heliport, requiring routine and unscheduled maintenance, fluid checks, and diagnostic troubleshooting to ensure operational readiness. Services must be delivered at the heliport location with continuous 24/7 availability for emergency responses, including aircraft-on-ground situations, ensuring rapid turnaround and minimal downtime for law enforcement missions. All work must be performed in compliance with industry standards and regulatory requirements, with the contractor expected to maintain expert-level technical proficiency and immediate responsiveness. The solicitation is structured as a subcontract under NAICS code 811112, with a response deadline of August 13, 2026, and is managed by the Finance/Purchasing Department of the City of Pomona, California, with no set-aside provisions specified. Performance is localized exclusively to the Pomona Police Heliport, and vendors must be prepared to meet stringent operational demands without delay.

General Info

24/7 on-site helicopter maintenance and emergency support at Pomona Police Heliport under NAICS 811112.

Agency

California → Finance/Purchasing Department of City of PomonaView Agency

NAICS

811112 - Automotive Exhaust System RepairView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-31.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Annual Helicopter Inspection, Maintenance and Repair Services

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 10:00:00 PM UTCin about 21 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Finance/Purchasing Department of City of Pomona

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Finance/Purchasing Department of City of Pomona

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Routine and unscheduled maintenance, inspections, fluid checks, and troubleshooting at the Pomona Police Heliport, including 24/7 on-call and AOG response.

Similar Contracts

Same NAICS industry code

Fleet Maintenance and Repair ServicesThe contract titled Fleet Maintenance and Repair Services solicits subcontractors to provide comprehensive on-site and depot-level maintenance, diagnostics, and repair services for heavy-duty trucks and trailers. Services encompass both preventive maintenance routines and emergency breakdown support to ensure fleet readiness and operational continuity. The work is governed under NAICS code 811112, which classifies it as automotive mechanical and electrical repair and maintenance, and is issued by the Tips Purchasing Cooperative under the Texas agency framework. The opportunity is open for response until September 18, 2026, with proposals due by 9:00 PM Eastern Time. The contract is structured as a subcontract, and there is no specified set-aside designation or geographic restriction for performance location. Interested parties must submit their proposals through the provided online portal prior to the deadline.

Tips Purchasing Cooperative

POSTED

DEADLINE

in about 1 month

Emergency Vehicle Electrical and Electronics Systems MaintenanceThe contract encompasses the diagnosis and repair of electrical and electronic systems on fire apparatus, covering critical components such as lighting, sirens, communication systems, onboard computers, and power distribution units. This maintenance work is essential to ensure the operational readiness and safety of emergency vehicles, requiring specialized technical expertise to address complex integrated systems that support firefighting and rescue operations. The scope demands precision, adherence to industry standards, and timely response to maintain fleet reliability under high-stakes conditions. Submitted as a subcontract opportunity posted by the City of Detroit under NAICS code 811112, the solicitation opens on August 5, 2026, with a response deadline of August 25, 2026. While no set-aside designation or specific place of performance is detailed, the work is expected to be performed in support of Detroit's fire apparatus fleet. Interested parties must submit proposals by the stated deadline to be considered, and all performance activity will be tied to maintaining the city’s emergency response capabilities through reliable, functional vehicle electronics.

City Of Detroit

POSTED

DEADLINE

Fire Apparatus Electrical & Lighting System MaintenanceThis contract concerns the repair and maintenance of electrical and lighting systems on fire apparatus, specifically covering warning lights, sirens, control panels, and wiring harnesses. It is classified as a subcontract under a Small Business Set Aside, meaning only eligible small businesses can compete, and it is tied to the NAICS code 811112 for automotive repair and maintenance. The opportunity was posted on July 28, 2026, with a response deadline of August 20, 2026, at 4:30 PM. Performance is required in Lansing, Michigan, with a zip code of 48906. The contracting activity is managed by the W7NF Uspfo Activity Mi Arng under the Department of Defense, though no specific point of contact or detailed office address is provided. The full solicitation can be accessed through the SAM.gov website via the provided link.

W7NF Uspfo Activity Mi Arng

POSTED

DEADLINE

Aircraft Engine & Component Overhaul ServicesThe contract encompasses comprehensive overhaul and maintenance services for aircraft engines manufactured by Pratt & Whitney and Honeywell, including major inspections, hot section inspections, turbine overhauls, and component refurbishment. These services are critical to ensuring operational readiness, safety, and extended service life of engine systems used in military and commercial aviation applications. The work involves detailed technical evaluation, disassembly, inspection, repair, and reassembly of high-value engine components to meet stringent performance and regulatory standards. Issued by the Texas A&M University System, the contract is classified as a subcontract with a solicitation response deadline of August 14, 2026, and was posted on July 16, 2026. It falls under the NAICS code 811112, which corresponds to aircraft maintenance and repair services. The place of performance and agency location details are unspecified, indicating potential flexibility in execution sites. All work must comply with industry best practices and contractual requirements for quality, documentation, and timeliness, with no set-aside provisions specified for small businesses or other categories. Bidders are expected to demonstrate proven expertise in handling proprietary engine systems and maintaining certification standards established by the original equipment manufacturers.

Texas A&M University System

POSTED

DEADLINE

Emergency AOG (Aircraft-on-Ground) Response CoordinationThe contract seeks to establish a rapid response capability for emergency aircraft-on-ground situations, specifically targeting the immediate diagnosis and resolution of critical failures in police aviation assets to minimize operational downtime. Providers must offer 24/7 availability to ensure continuous mission readiness, with a focus on swift, on-site intervention that maintains the operational integrity of law enforcement aircraft. The scope emphasizes responsiveness and technical expertise over routine maintenance, requiring contractors to be prepared to mobilize at any time to support time-sensitive policing missions. This is a subcontract under the NAICS code 811112, indicating specialized aircraft repair and maintenance services, issued by the Finance/Purchasing Department of the City of Pomona in California. The solicitation was posted on July 14, 2026, with a response deadline of August 13, 2026, at 10:00 PM Pacific Time. Although no set-aside classification or point of contact information is provided, the place of performance and agency details are tied to Pomona, California, suggesting that response teams must be capable of rapid deployment within this region or to any location where the city’s police aviation units are operating. Participation requires proven capability in urgent aviation repair, logistical agility, and sustained availability to meet the non-negotiable demands of public safety operations.

Finance/Purchasing Department of City of Pomona

POSTED

about 1 month ago

DEADLINE

in about 21 hours

Permitting & Code Compliance ManagementThe contract entails comprehensive permitting and code compliance management for a plumbing project located in Pico Rivera, California, with a ZIP code of 90660. The contractor is responsible for securing all necessary permits, ensuring full adherence to local city and county regulations, and coordinating all required inspections and approvals to maintain regulatory compliance throughout the project lifecycle. This work is classified as a subcontract under NAICS code 811112, indicating it involves other miscellaneous repair and maintenance services, and was posted on July 9, 2026, with the performance site firmly situated within the jurisdiction of the City of Pico Rivera. The scope demands proactive engagement with municipal authorities, accurate documentation, and timely responses to compliance requirements to facilitate smooth project execution without delays or penalties.

City of Pico Rivera

POSTED

about 1 month ago

DEADLINE

Temporary Event Logistics & Site ManagementThe contract requires comprehensive planning and on-site management of logistics for a seven-day paddleboard event in San Diego, focusing on the coordination of event layout, access control, and safety protocols to ensure smooth operations throughout the duration of the event. The vendor must work closely with the San Diego Unified Port District and surrounding hotel operations to align logistics with port regulations, maritime activity schedules, and local hospitality services, ensuring minimal disruption and optimal coordination across all stakeholders. All activities must adhere to established safety standards and local operational guidelines, with particular attention to crowd management, emergency response readiness, and seamless integration with port authority requirements. The subcontract is categorized under NAICS code 811112, indicating a focus on commercial and logistical support services, and the place of performance is exclusively in San Diego. The event is scheduled to take place in 2026, with the contract posting date indicating an early-stage procurement timeline, suggesting early engagement and detailed planning are required to meet all operational and regulatory expectations.

San Diego Unified Port District

POSTED

DEADLINE

Mobile Heavy Equipment Repair ServicesThe contract encompasses on-site or near-site mechanical labor and diagnostics for the R-11 refueler, focusing on critical systems including engine testing, coolant system inspections, and post-rebuild validation to confirm operational readiness. Services are required to ensure the equipment meets performance standards after maintenance or repair, with technicians expected to deliver timely and reliable support in a field environment. The work is classified under NAICS code 811112, indicating it falls within the automotive repair and maintenance sector, and is structured as a subcontract under the Department of Defense. The place of performance is localized to the 89502 ZIP code area, suggesting the services will be delivered at or near a military installation or support facility in that region. The contract was posted on May 21, 2026, under the agency name W7NM Uspfo Activity Nvang 152, and while the solicitation number is unspecified, the work is part of a broader DoD maintenance initiative. There is no set-aside designation provided, and no point of contact is listed, indicating that further details may be available through the SAM.gov link provided for official reference.

W7NM Uspfo Activity Nvang 152

POSTED

DEADLINE

Automotive Electrical Systems IntegrationThe contract pertains to the wiring and integration of advanced control systems designed for automotive adaptations, focusing on electronic hand controls, lift power systems, and dashboard interface modules. These components are critical for enabling accessibility and operational control for individuals with mobility challenges, requiring precise electrical engineering and seamless system synchronization to ensure safety, reliability, and regulatory compliance. The work involves both the physical installation of wiring harnesses and the software-based coordination of electronic functions across multiple vehicle subsystems to support adaptive vehicle modifications. This is a subcontract awarded under the Department of Veterans Affairs through the 250-NETWORK Contract Office 10, categorized under NAICS code 811112, which corresponds to automotive mechanical and electrical repair and maintenance services. The opportunity was posted in April 2026 and is intended to support vehicle modifications that enhance independence and accessibility for veterans, though no specific place of performance or point of contact is provided. The nature of the work demands specialized expertise in automotive electronics, compliance with industry safety standards, and experience in custom integration for adaptive mobility equipment.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Front Bumper Installation (Fab Fours Brand)The contract involves the supply and installation of Fab Fours brand front bumpers on government vehicles under the Department of the Interior's Oregon State Office. The scope includes removing existing bumpers, mounting new Fab Fours bumpers, and ensuring proper alignment according to established standards. This subcontract is categorized under NAICS code 811112, which pertains to automotive repair and maintenance services. Though specific location and point of contact details are not provided, the work is designated to be performed at an unspecified site. The contract was posted on April 2, 2026, and focuses on ensuring that government vehicles are upgraded with high-quality front bumpers to meet operational and safety requirements. The project emphasizes compliance with technical specifications and professional installation practices.

Oregon State Office

POSTED

DEADLINE

Heavy-Duty Truck Engine Diagnostics and RepairThis contract involves the diagnosis and repair of mechanical and performance issues specifically related to the 2015 Freightliner M2-106 chassis engine. The scope includes troubleshooting engine problems, replacing necessary parts, and conducting performance testing to ensure proper functionality. It is intended for heavy-duty truck engine diagnostics and repair services, emphasizing thorough maintenance to restore and maintain engine performance. Issued by the Department of Veterans Affairs through the 255-NETWORK Contract Office 15, this subcontract opportunity is associated with NAICS code 811112, which pertains to automotive mechanical and electrical repair and maintenance. The work is to be performed in Evansville, with a postal code of 47715. The solicitation does not specify any set-aside status or detailed organizational type for bidders, and no public contact information is given. This contract supports the maintenance of vital transportation assets for the agency.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Marine Electrical Systems Maintenance

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

More opportunities from California → Finance/Purchasing Department of City of Pomona

Same awarding agency

Transportation and Delivery Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 21 hours

Supply of Miscellaneous Fabricated Steel Products

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

in about 21 hours

Fabrication of Wrought Iron Panels and Gates

Sheet Metal Work Manufacturing

POSTED

DEADLINE

in about 21 hours

Powder Coating Application Services

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

in about 21 hours

Sandblasting and Surface Preparation Services

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

in about 21 hours

Small and Minority-Owned Business Participation (Supplier Outreach Opportunity)The City of Pomona’s Finance/Purchasing Department is offering an opportunity for certified Minority Business Enterprise, Women Business Enterprise, and Disadvantaged Business Enterprise suppliers to engage in city-related contracting through supplier outreach initiatives. This is not a formal subcontracting opportunity with mandatory requirements, but rather a voluntary inclusion effort aimed at increasing the participation of diverse suppliers in city projects. Prime contractors are encouraged to work with certified MBE, WBE, or DBE firms to support local economic development and meet the city’s broader outreach goals, though no formal subcontracting plan is required. The initiative is designed to foster relationships and create visibility for certified businesses without imposing binding obligations on prime vendors. This opportunity is open to eligible suppliers who respond by the deadline of August 13, 2026, at 10:00 PM Pacific Time, with the solicitation posted on July 20, 2026. While no NAICS code, set-aside classification, or specific contracting details are provided, the initiative is structured as a subcontract outreach program under the auspices of the City of Pomona in California. Interested suppliers are encouraged to visit the provided portal link for additional information, submission guidelines, and potential alignment with upcoming project needs. There is no formal bid or proposal submission required, but engagement through this platform enhances a supplier’s chances of being considered by prime contractors pursuing city projects.

Business Associations

POSTED

DEADLINE

in about 21 hours

Transportation and Material Handling ServicesThe contract is for transportation and material handling services related to fabricated metal components, requiring the movement of items to and from a vendor's facility for coating operations. The City of Pomona’s Finance/Purchasing Department will deliver the components to the vendor prior to surface treatment and retrieve them after the coating process is complete. Responsibility for managing the inbound and outbound logistics flow may fall to a prime contractor, who may need to engage a third-party logistics partner to ensure consistent, reliable, and timely transportation. The work is classified under NAICS code 484220, which covers specialized freight trucking, indicating the need for equipment and expertise suited for handling industrial metal parts. Responses must be submitted by August 13, 2026, at 10:00 p.m. Pacific Time, and the opportunity is structured as a subcontract under the City of Pomona’s procurement process.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 21 hours

Sandblasting and Powder Coating – Miscellaneous Fabricated Metal ProductsThe contract encompasses sandblasting and powder coating services for a variety of small-to-medium fabricated metal components such as square tubing, pipe racks, flat stock, corrugated steel, and other structural or architectural metal elements, with work performed on an as-needed basis. The scope is focused on surface preparation and protective finishing to ensure durability and aesthetic quality for metal parts used in municipal or infrastructure applications. All work must meet industry standards for surface cleanliness and coating adherence, with quantities and schedules dictated by operational demands. This subcontract is issued by the Finance/Purchasing Department of the City of Pomona in California under NAICS code 332812, which classifies it as a metal coating service. The solicitation was posted on July 20, 2026, with a response deadline of August 13, 2026, at 10:00 PM Pacific Time. The place of performance and specific office details are not provided, indicating that work may be conducted at the vendor’s facility or as directed by the city. Interested parties must submit proposals through the designated online portal before the deadline to be considered for award.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

in about 21 hours

Sandblasting and Powder Coating – Wrought Iron Panels & GatesThe contract calls for surface preparation through sandblasting and the application of protective powder coating on large wrought iron panels and gates ranging from 8 feet high by 4 feet wide to 8 feet high by 20 feet wide, with an estimated volume of 200 units over a three-year term. Work must be performed to ensure thorough removal of rust, old coatings, and contaminants prior to coating, and the powder coating must provide durable, long-lasting corrosion resistance suitable for outdoor exposure. The contract is structured as a subcontract under NAICS code 332812, which pertains to metal coating services, and is issued by the Finance/Purchasing Department of the City of Pomona in California. Responses are due by August 13, 2026, and performance is expected to meet specified quality standards without detailing exact location requirements beyond the broader jurisdictional scope of the issuing agency.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

in about 21 hours

Sandblasting and Powder Coating Services

Solicitation # 206-1016

The City of Pomona is soliciting bids for a three-year contract to provide annual sandblasting and powder coating services through a competitive procurement process under solicitation number 206-1016. All work must be performed at the vendor’s facility, with the City responsible for transporting items to the vendor and retrieving them upon completion; the contract is strictly a service agreement and does not include material supply. Vendors must meet all specified technical and operational requirements outlined in the Scope of Services and must demonstrate the capability to deliver consistent, high-quality results in accordance with City standards. The solicitation is open to qualified local companies and is managed by the Finance/Purchasing Department, with responses due by August 13, 2026 at 10:00 PM Pacific Time. The primary point of contact for inquiries is Sonia Gil, who can be reached via email or phone provided in the solicitation. The contract will be awarded under a state and local government procurement framework, and all performance is expected to occur within California.

Other Building Finishing Contractors

POSTED

DEADLINE

in about 21 hours

Sandblasting and Powder Coating Services

Solicitation # 2026-1016

The City of Pomona is soliciting bids for a three-year contract to provide annual sandblasting and powder coating services exclusively at the vendor’s facility, with all materials transported to and from the vendor by City personnel. This is a service contract under Invitation for Bid No. 2026-1016, with proposals due by August 13, 2026, and must be submitted exclusively through the PlanetBids vendor portal, with no exceptions for hardcopy, email, or fax submissions. The scope includes blasting and powder coating wrought iron panels and gates measuring between 8 feet tall by 4 feet wide and 8 feet tall by 20 feet wide, as well as miscellaneous fabricated products such as square tubing, pipe racks, flat stock, and corrugated steel, with an estimated quantity of 200 units for the primary item. All work must comply with the City’s specifications and code, and vendors must hold all necessary licenses and certifications. The City retains the right to inspect and accept completed work at its designated delivery location, with payment occurring only upon successful delivery, acceptance, and receipt of a properly formatted invoice. Contracts exceeding $5,000 require a City purchase order, and invoices must be sent directly to the City for payment by check; no electronic invoicing systems are used. Bidders must submit a signed Statement of Non-Collusion, Executive Order N-6-22 Certification confirming no business ties to sanctioned Russian entities, and complete the Minority Business Questionnaire if claiming minority or women-owned status. Insurance requirements include Professional Liability, General Liability, Workers’ Compensation, and Automobile Liability, with certificates and endorsements submitted as Exhibit A. No formal clause numbers from the FAR are applied, but the procurement follows local policies emphasizing responsibility and responsiveness. Awards will be made to the lowest responsive and responsible bidder under LPTA principles, evaluating quality, capacity, financial stability, past performance, and technical capability without numerical weighting. Strict conflict-of-interest rules prohibit vendors with current or recent City employees or relatives of City officials from bidding unless a City Council waiver is obtained, and any violation of ethical conduct, including offering gratuities or engaging in bid collusion, will result in immediate disqualification or contract voidance. All packaging must clearly display the City’s purchase order number, and shipments are F.O.B. Destination with freight costs included in the bid price. The City reserves the right to reject any bid, and no estimated contract value is provided since pricing fields remain blank for vendor proposal

POSTED

DEADLINE

in about 21 hours

Minority- and Female-Owned Business (MBE/WBE) Program Support

Sports and Recreation Instruction

POSTED

DEADLINE