Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Installation and Technical Training Services

Active

Federal

Response Deadline07/31/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the on-site delivery, installation, calibration, and commissioning of a wavefront sensor at the Naval Research Laboratory in Washington, D.C., with a zip code of 20375. The work includes complete technical integration of the system at the facility and requires that all components be fully functional and calibrated to meet operational standards prior to handover. Accompanying this physical deployment is mandatory hands-on training for facility personnel on the operation of the hardware, utilization of associated software, and routine maintenance procedures to ensure long-term system reliability and autonomous use. This subcontract is classified under NAICS code 541715, indicating it relates to research and development in the physical, engineering, and life sciences. The opportunity was posted on July 28, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense through the Naval Research Laboratory. The place of performance is specifically designated as Washington, and all services must be performed on-site; remote support or off-site delivery is not acceptable. The contract emphasizes direct, in-person technical engagement to ensure personnel are thoroughly proficient in system handling, troubleshooting, and upkeep, making operational readiness a central objective.

General Info

On-site installation, calibration, and training for wavefront sensor at Naval Research Laboratory, Washington, D.C.

Agency

Department Of Defense → Naval Research LaboratoryView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

Washington, DC, 20375, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 12:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Research Laboratory

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Research Laboratory

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Delivery, installation, calibration, and commissioning of the wavefront sensor at NRL, including hands-on training for system operation, software use, and maintenance.

Similar Contracts

Same NAICS industry code

Technical Integration and Testing SupportThe contract requires technical integration and testing support for the incorporation of laser modules into the SCALPSS 2.0 stereo camera system, a critical component for space-based optical sensing. The work encompasses precise optical alignment, thermal vacuum testing to simulate space environmental conditions, and full flight qualification to ensure system reliability under extreme operational stresses. All activities must meet stringent NASA standards for spacecraft hardware, with performance validated through rigorous procedural checkpoints and documentation. The place of performance is designated as Hampton, Virginia, where the facilities and expertise necessary for high-fidelity environmental and optical testing are located. This subcontract is issued under the NAICS code 541715 for research and development in physical, engineering, and life sciences, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Proposals must be submitted by July 30, 2026, with the solicitation posted on July 28, 2026, indicating a highly time-sensitive procurement window. The successful contractor will be expected to deliver fully integrated and qualified laser modules ready for flight, with all testing results and compliance records maintained to NASA’s archival and audit requirements. No set-aside designation is specified, and the opportunity is open to qualified entities capable of meeting the technical, temporal, and quality demands of this mission-critical support effort.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

Deep Learning Integration for Design SuggestionThe contract seeks the development of a deep learning model to generate novel nozzle geometries by leveraging historical simulation data and real-time performance feedback, aiming to optimize fluid dynamics and propulsion efficiency. The project is a subcontract under the NASA Shared Services Center, tied to the National Aeronautics and Space Administration, with performance centered at Stennis Space Center, Mississippi, 39529. The initiative falls under NAICS code 541715, indicating it is focused on research and development in physical, engineering, and life sciences. The opportunity was posted on July 28, 2026, with a response deadline of July 30, 2026, underscoring a rapid procurement timeline. The model must effectively learn from prior computational fluid dynamics simulations and adaptively refine design suggestions based on live operational data, ensuring that proposed geometries are both innovative and viable for aerospace applications.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

Embedded Optimization Algorithm DevelopmentThe contract involves the development and integration of advanced optimization algorithms such as genetic and gradient-based methods to enhance the design of aerospike nozzles through iterative simulation feedback. The goal is to leverage computational modeling to refine nozzle geometry and performance metrics, ensuring improved efficiency, thrust, and thermal resilience under extreme conditions typical of rocket propulsion systems. This work requires close alignment with aerospace engineering principles and high-fidelity simulation tools to generate actionable design improvements. The contract is a subcontract under NASA’s Shared Services Center, specifically designated for work at Stennis Space Center, Mississippi, with a strict response deadline of July 30, 2026, and a posting date of July 28, 2026. It falls under NAICS code 541715, which categorizes research and development in the physical, engineering, and life sciences. The project demands technical expertise in algorithmic optimization, computational fluid dynamics, and aerospace system design, with an emphasis on delivering robust, validated solutions that directly inform next-generation propulsion architectures for NASA’s mission objectives.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

Automated Grid Deformation Module DevelopmentThe contract calls for the development of automated software routines capable of deforming computational fluid dynamics grids in real time to match dynamic changes in aerospike nozzle geometry, ensuring accurate simulation fidelity as design parameters shift. This module must be fully integrated with the Loci/CHEM framework, a high-performance simulation platform used for advanced propulsion modeling, requiring seamless data exchange, compatibility with existing solver architectures, and robust handling of complex mesh topologies under extreme deformation conditions. The work targets a specific performance location at Stennis Space Center with a zip code of 39529, where the software will be validated against experimental and simulation benchmarks. The project is structured as a subcontract under NASA’s Shared Services Center, falling under the NAICS code 541715 for scientific research and development services. The solicitation was posted on July 28, 2026, with a strict response deadline of July 30, 2026, indicating a rapid procurement timeline typical of time-sensitive aerospace innovation efforts. While no set-aside provisions or point of contact details are provided, the contract’s focus on grid deformation in propulsion systems underscores its critical role in enabling efficient, high-fidelity analysis of next-generation rocket engines, particularly those utilizing aerospike nozzle configurations to enhance performance across altitude ranges.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

Bioinformatics and HLA Data Analysis SupportThe contract seeks bioinformatics services focused on the analysis of next-generation sequencing data for human leukocyte antigen (HLA) typing, including accurate allele calling and seamless integration with existing laboratory information systems. The work requires advanced computational methods to process complex NGS datasets, ensure high-confidence HLA genotype assignments, and deliver results in formats compatible with clinical and research lab workflows. The contractor must demonstrate expertise in HLA bioinformatics pipelines, data quality assurance, and interoperability with diagnostic and transplant-related systems. This is a subcontract opportunity under the Department of Veterans Affairs, managed by the 249-NETWORK Contract Office 9 (36C249), with performance expected to occur in Nashville, Tennessee, at the zip code 37212. The solicitation was posted on July 28, 2026, and responses are due by August 24, 2026. The North American Industry Classification System code is 541715, indicating the scope falls under computational biology and bioinformatics services. The contract does not specify a set-aside type, and no point of contact details are provided in the listing. Interested parties must navigate the SAM.gov portal using the provided UI link to access full submission instructions.

249-NETWORK Contract Office 9 (36C249)

POSTED

about 23 hours ago

DEADLINE

In-Situ Process Monitoring and Data AcquisitionThis contract seeks to implement real-time in-situ monitoring during laser powder bed fusion (LPBF) additive manufacturing builds to capture critical process variables including melt pool dynamics, thermal gradients, and early signs of defect formation. The goal is to generate structured, high-fidelity data outputs that enable precise process control and quality assurance, directly supporting the advancement of reliable metal additive manufacturing for aerospace applications. The work must deliver actionable insights derived from continuous sensor data acquisition synchronized with the build process. The opportunity is listed as a subcontract under NAICS code 541715, indicating it pertains to research and development in physical, engineering, and life sciences. It is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with a response deadline of July 31, 2026, at 3:00 PM Eastern Time. While no specific location for performance is provided, the work is expected to support NASA’s mission-critical goals in advanced manufacturing, with an emphasis on enhancing process repeatability and reducing post-build inspection needs through real-time diagnostics.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

AI/ML Model Development for Cardiovascular SimulationThe contract seeks the development and validation of artificial intelligence and machine learning models aimed at enhancing the reliability and reproducibility of computational simulations used to evaluate cardiovascular devices. The work will focus on creating robust AI/ML systems that improve the accuracy and consistency of simulation outcomes, ensuring that these tools can be trusted for regulatory and clinical decision-making. The project is critical for advancing the use of digital twins and virtual testing environments in the assessment of cardiovascular implants and interventions, ultimately supporting safer and more effective medical device innovation. This subcontract is issued under the NAICS code 541715 for scientific research and development services by the FDA Office of Acquisition and Grant Services within the Department of Health and Human Services. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026. While no set-aside designation or location details are specified, the work is expected to be performed remotely or wherever the contractor’s capabilities are located. Participation requires expertise in computational modeling, biomedical data science, and regulatory-compliant validation methodologies, with the goal of producing models that meet the stringent standards needed for FDA-relevant device evaluation.

FDA Office Of Acq Grant Svcs

POSTED

about 23 hours ago

DEADLINE

AI/ML Models for Drug Composition VerificationThe contract seeks the development of advanced machine learning algorithms to non-invasively verify drug identity, detect contaminants, and identify substandard pharmaceutical formulations by analyzing multi-sensor data without requiring penetration of the container. This effort is focused on creating robust AI models capable of interpreting complex sensor inputs to ensure drug quality and safety, supporting regulatory and public health objectives through innovative, contactless analysis. The work must be completed within a strict timeline, with proposals due by August 20, 2026, and is classified as a subcontract under NAICS code 541715, indicating a focus on research and development in the physical, engineering, and life sciences. The contracting agency is the Advanced Research Projects Agency for Health, part of the U.S. Department of Health and Human Services, and the performance location is designated as Washington, D.C. with a ZIP code of 20005. While no set-aside provisions or specific point of contact are provided, the solicitation emphasizes technological innovation in pharmaceutical verification, targeting solutions that enhance supply chain integrity and public health outcomes. The absence of a solicitation number and detailed office address suggests this may be an internal or pre-solicitation notice, but the clear deadline and agency affiliation indicate active planning for future contracting actions.

Advanced Research Projects Agency For Health (arpa-H)

POSTED

about 23 hours ago

DEADLINE

COTS Lens Adaptation and Performance EvaluationNASA is seeking a small business to evaluate commercial off-the-shelf lenses for potential adaptation to the Wide Field Camera Core system, focusing on their performance under space conditions. The work includes a rigorous ruggedization analysis to assess structural and thermal resilience, simulation of the space environment to test durability against radiation, vacuum, and extreme temperatures, and a comprehensive cost-benefit trade study to determine feasibility versus custom optical solutions. The contract is a subcontract under a total small business set-aside, ensuring eligibility is limited to small businesses as defined by the SBA, with NAICS code 541715 covering research and development in physical, engineering, and life sciences. The solicitation was posted on July 28, 2026, with a tight response deadline of July 29, 2026, indicating urgency in securing a partner capable of delivering rapid, high-fidelity technical analysis. Performance is expected to support NASA’s objectives for cost-effective, reliable optical systems in space missions, with all work directed toward enabling mission-critical capability through mature commercial technology.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

in about 10 hours

Flight-Hardware Reuse Assessment – Modified Flight-Qualified LensNASA is seeking a small business contractor to assess the feasibility of reusing or modifying a flight-qualified lens, such as the VIPER NavCam, for potential application in the WFCC program. The evaluation must thoroughly examine interface compatibility with existing systems, required performance adaptations to meet WFCC mission objectives, and a comprehensive risk assessment covering technical, schedule, and cost implications. The effort focuses on leveraging proven hardware to reduce development time and expenses while ensuring mission-critical reliability and functionality are maintained. The contract is structured as a subcontract under a Total Small Business Set-Aside, with the North American Industry Classification System code 541715 indicating it falls under scientific research and development services. The solicitation was posted July 28, 2026, and proposals must be submitted by 9:00 PM Eastern Time on July 29, 2026. The work is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance expected to be conducted in alignment with NASA’s standard oversight and compliance protocols, though no specific place of performance is identified. This opportunity is targeted exclusively at small businesses to promote innovation and efficiency through the repurposing of existing flight hardware.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

in about 10 hours

Optical Design Engineering – Clean Sheet Lens DevelopmentNASA is seeking a small business contractor to perform a complete clean-sheet optical design for the Aeolus WFCC lens, encompassing full modeling, ray tracing, tolerance analysis, and performance simulation under actual mission conditions. The effort requires deep expertise in optical engineering to deliver a system optimized for aerospace applications, with all design activities must meet the rigorous demands of space-based observation missions. The contract is structured as a small business set-aside under the SBA program, exclusively available to businesses certified as total small businesses, and is classified under NAICS code 541715 for scientific research and development services. The solicitation was posted on July 28, 2026, with a strict response deadline of July 29, 2026, leaving a narrow window for qualified firms to submit proposals through the SAM.gov portal. All work is expected to be performed under NASA’s oversight, aligning with the agency’s mission-critical standards for precision optical systems.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

in about 10 hours

Bioinformatics and Genomic Data AnalysisThis contract is a small business set-aside opportunity under the NAICS code 541715 for bioinformatics and genomic data analysis services, issued by the USDA Agricultural Research Service. The work involves comprehensive computational analysis of raw sequencing data, including genome assembly, variant calling, annotation, and statistical interpretation to extract meaningful biological insights. Performance is required at Beltsville, Maryland, with a submission deadline of August 5, 2026, and the opportunity was posted on July 28, 2026. The contract is structured as a subcontract and is exclusively available to small businesses as defined by the SBA, ensuring participation is limited to eligible small business concerns under the Total Small Business Set-Aside provisions. All technical efforts must align with the goal of translating complex genomic datasets into actionable biological interpretations.

USDA Ars Afm Apd

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Research Laboratory

Same awarding agency

Post-Warranty Maintenance and Support ServicesThe contract pertains to the provision of ongoing technical support, preventive maintenance, and repair services for the wavefront sensor system following the expiration of the initial one-year warranty period. Services are required to ensure continued operational reliability and performance of the system under demanding conditions, with all work to be performed at the designated place of performance in Washington, DC, with a postal code of 20375. The contract is classified as a subcontract under NAICS code 811212, indicating it falls within the scope of electronic and precision equipment repair and maintenance. It is issued by the Naval Research Laboratory under the U.S. Department of Defense and was posted on July 28, 2026, with a mandatory response deadline of July 31, 2026. No set-aside designation or specific contracting vehicle details are provided, and no point of contact information has been included in the posting. The solicitation is open to eligible subcontractors capable of delivering sustained, high-quality technical services to support critical defense-related sensor systems.

Computer and Office Machine Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Wavefront Analysis Software and Technical DocumentationThe contract entails the provision of proprietary software designed for phase and intensity analysis, accompanied by complete English-language user and software manuals. The software is fully licensed and includes ongoing technical support to ensure seamless integration and sustained operation. This subcontract is issued by the Naval Research Laboratory under the Department of Defense, with performance required in Washington, DC, at the 20375 ZIP code. The NAICS code 511210 categorizes this as software publishing, reflecting the nature of the deliverables. The solicitation was posted on July 28, 2026, with a response deadline of July 31, 2026, indicating a tightly scheduled procurement process. All materials must be delivered in English, and the vendor is expected to comply with the licensing and support requirements outlined in the agreement.

Software Publishers

POSTED

about 23 hours ago

DEADLINE

Supply of Dual-Band Infrared Wavefront Sensor PackageThe Naval Research Laboratory is seeking a subcontractor to supply a commercial off-the-shelf SID4-DWIR wavefront sensor system capable of operating simultaneously in the mid-wave infrared and long-wave infrared spectral bands. The system must meet stringent performance requirements including specific aperture dimensions, spatial resolution, phase accuracy, and frame rate to support advanced optical testing and adaptive optics applications. This procurement is targeted toward a solution that is ready for immediate integration without custom development, ensuring rapid deployment and operational readiness. The contract opportunity is posted with a response deadline of July 31, 2026, and is classified under NAICS code 333310 for optical instrument and lens manufacturing. Performance is expected to occur at a facility in Washington, DC, with a ZIP code of 20375. The subcontract will not involve any set-aside provisions and is open to qualified industry vendors who can demonstrate compliance with the technical specifications and delivery timelines. All proposals must address the required performance metrics for dual-band infrared wavefront sensing to be considered for award.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Cybersecurity Compliance and ReportingThe contract requires full implementation of NIST SP 800-171 security controls to safeguard controlled unclassified information within covered contractor information systems, in alignment with DFARS 252.204-7012. It mandates a comprehensive self-assessment of compliance with these controls, documenting the posture and identifying any gaps, alongside formal reporting of any cyber incidents affecting covered systems as governed by DFARS 252.204-7008. The effort must be completed by the response deadline of July 31, 2026, and performance is to be carried out at the Washington, DC area location with the ZIP code 20375. The work falls under NAICS code 541611 for management, scientific, and technical consulting services, and is structured as a subcontract under the Department of Defense, specifically for the Naval Research Laboratory.

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

Calibration and Performance Verification ServicesThe contract seeks the provision of calibration software equipped with spectral look-up tables and the verification of system performance against specified technical parameters including phase stroke, response time, and switching frequency. This effort is intended to ensure precise and reliable functionality of instrumentation systems used in defense-related applications, with a focus on accurate spectral analysis and dynamic response characteristics. The services are required to meet rigorous performance benchmarks to support operational effectiveness under demanding environmental and technical conditions. The contract is classified as a subcontract under NAICS code 541380, issued by the Naval Research Laboratory under the Department of Defense, with performance required at a location in Washington, D.C., ZIP code 20375. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026. While no specific set-aside status or point of contact is provided, the urgency of the deadline and the technical specificity indicate a high-priority requirement for qualified vendors capable of delivering calibrated software solutions and validated performance data in a timely manner.

Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

On-Site Installation, Demonstration, and TrainingThe contract requires on-site physical delivery, installation, demonstration, and hands-on training for personnel at the U.S. Naval Research Laboratory in Washington, DC, with the place of performance specified as ZIP code 20375. All services must be performed directly at the facility and are intended to ensure NRL staff can effectively operate and utilize the equipment or system being provided. The work falls under NAICS code 541690, which encompasses other scientific and technical consulting services, indicating a focus on specialized technical support rather than standard procurement. The contract is designated as a subcontract and is open for response until July 31, 2026, with the solicitation posted on July 28, 2026. The performing organization is under the Department of Defense, specifically the Naval Research Laboratory, and all activities must align with the lab’s operational requirements and security protocols.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Control Software and SDK DevelopmentThe contract involves the development and delivery of control software, calibration tools, and a software development kit with LabVIEW and MATLAB drivers designed to enable seamless integration and operation of a spatial light modulator. The work must be completed under a subcontract arrangement and is tied to the North American Industry Classification System code 511210, which pertains to software publishing. The place of performance is specified as Washington, DC with a ZIP code of 20375, indicating the work is to be conducted in or near the Naval Research Laboratory’s facility. The solicitation was posted on July 28, 2026, with a response deadline of July 31, 2026, suggesting a tight turnaround for proposers to submit technical and commercial offers. The contracting entity is the Department of Defense through the Naval Research Laboratory, emphasizing the defense-oriented nature of the technology being developed. The SDK and associated drivers must support industry-standard platforms to ensure compatibility and ease of use within research and operational environments.

Software Publishers

POSTED

about 23 hours ago

DEADLINE

MWIR Spatial Light Modulator (SLM) Hardware SupplyThe Naval Research Laboratory is seeking a subcontractor to supply a commercial off-the-shelf mid-wave infrared spatial light modulator with precise optical and physical specifications, including a 1024×1024 pixel array, a pixel pitch under 18 micrometers, and a fill factor exceeding 97 percent. The device must deliver full 0 to 2π phase modulation capability across the entire 3 to 6 micrometer spectral range, ensuring compatibility with high-performance infrared systems. The hardware must meet rigorous performance benchmarks without custom engineering, relying strictly on existing market-available technology. This solicitation, classified as a subcontract under NAICS code 334510, has a tight response window closing on July 31, 2026, and is targeted for performance at a location in Washington with a ZIP code of 20375. The procurement is part of a Department of Defense initiative, emphasizing the need for reliable, standardized components to support advanced defense and research applications in infrared optics. While no set aside or specific socio-economic preference is indicated, compliance with the technical requirements and timely delivery are critical for consideration.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

Liquid and Compressed Gas FulfillmentThe US Naval Research Laboratory is seeking qualified vendors to fulfill requirements for the delivery of liquid and compressed gases under solicitation number N0017326, with responses due by August 28, 2026. The solicitation, posted on July 28, 2026, falls under NAICS code 325120 and is open to all potential suppliers without a specific set-aside designation. All deliveries are expected to be performed at the laboratory’s facility in Washington, District of Columbia, with a zip code of 20375. The primary point of contact for inquiries is Graham W.J. Fisher, reachable via email at graham.w.fisher.civ@us.navy.mil or by phone at 202-923-1344. Vendors must carefully review all associated attachments to fully understand the scope, specifications, and requirements for compliance with this procurement.

Industrial Gas Manufacturing

POSTED

about 23 hours ago

DEADLINE

Purchase Laser controller that is interchangeable with Toptica DL100 laser head with central wavelength at 637nmThe Naval Research Laboratory intends to award a sole source purchase order to Toptica Photonics Inc for a laser controller compatible with the Toptica DL100 laser head, operating at a central wavelength of 637nm, under the belief that no other supplier can meet the specific technical requirements. This action is justified under the Federal Acquisition Regulation Part 13.106-1(b) using Simplified Acquisition Procedures, as the estimated value does not exceed the $250,000 threshold. The procurement is classified under NAICS code 334413 with a small business size standard and FSC/PSC 6640. Interested parties may submit information demonstrating that competitive sourcing would be advantageous to the government, but responses must provide clear and convincing evidence to challenge the sole source determination. All submissions must reference the notice number N00173-26-P-1301396073 and be received by July 31, 2026, at 0800 hours. No reimbursement will be provided for costs incurred in responding, and the government retains full discretion to proceed without competition regardless of feedback received. The point of contact for inquiries is James Buie at the Naval Research Laboratory in Washington, D.C.

Semiconductor and Related Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

RF Magnetron Sputter power SuppliesThe U.S. Naval Research Laboratory, under the Department of Defense, is seeking two RF magnetron sputter power supplies for combinatorial materials growth, as part of a combined solicitation numbered N00173-26Q-1301392637. The requirement is posted under NAICS code 334516 and targets advanced deposition systems essential for high-throughput materials research, typically used to create and characterize diverse thin-film compositions simultaneously. Offers are due by August 2, 2026, with performance expected to occur at the agency’s facility in Washington, District of Columbia, 20375. The point of contact for inquiries is Danielle Davenport, who can be reached via email at danielle.c.davenport4.civ@us.navy.mil. The solicitation is open to eligible contractors without set-aside restrictions and reflects a direct procurement by a federal research and development entity focused on next-generation material science applications.

Analytical Laboratory Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

Purchase a infrared spatial light modulatorThe Naval Research Laboratory in Washington, DC, is soliciting quotations for the purchase of dielectric and ferroelectric test systems to enhance current testing capabilities, under a full and open competitive RFQ issued as a combined synopsis/solicitation per FAR Subpart 12.6. The procurement is on a Firm-Fixed-Price basis with a NAICS code of 334516 and PSC 6640. All equipment must be brand new, covered by the manufacturer’s warranty, and sourced only from an Original Equipment Manufacturer or an authorized dealer, distributor, or reseller capable of providing full OEM warranty and service support; documentation certifying authorization must accompany each quotation. The solicitation mandates compliance with numerous FAR and DFARS provisions and clauses, including requirements for System for Award Management registration, Buy American Act compliance, certification of responsibility and affirmative action, and cybersecurity safeguards under DFARS 252.204-7012. Offers must include a statement confirming acceptance of all solicitation terms without modification or specify any exceptions with rationale, and must be submitted via email by July 31, 2026, at 9 a.m. EST, including the company’s DUNS number and CAGE code. Evaluation will follow a Lowest Price Technically Acceptable approach, where price is the primary factor, but technical acceptability is mandatory; only offers meeting all technical specifications will be considered, and award will go to the lowest-priced technically acceptable offer. The government will not conduct negotiations and will award based on conformity and price competitiveness.

Analytical Laboratory Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE