Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Program Management & Coordination

Active

Federal

Response Deadline08/28/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires on-site program management services at the Southwest Regional Maintenance Center in San Diego, specifically to coordinate technical teams, maintain strict adherence to project schedules, and serve as the primary liaison between the contractor and the Navy’s Contracting Officer’s Representative and Technical Point of Contact. The role demands active, physical presence at the facility to ensure seamless communication, operational alignment, and timely execution of technical tasks critical to Navy maintenance and support missions. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, classified under NAICS code 541611 for Management Consulting Services, with a response deadline of August 28, 2026. Performance is localized to the San Diego area with ZIP code 92136, and all work must be conducted physically at the government facility. The solicitation, posted on July 28, 2026, reflects a targeted effort to leverage the capabilities of SDVOSBs in supporting complex defense maintenance operations.

General Info

On-site program management at San Diego Navy facility for SDVOSBs, coordinating technical teams and liaising with Navy officials.

Agency

Department Of Defense → Southwest Regional Maintenance CenterView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

San Diego, CA, 92136, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 28

Submission deadline

Response Deadline

08/28/2026, 09:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Southwest Regional Maintenance Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Southwest Regional Maintenance Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide on-site program management to coordinate technical teams, ensure schedule adherence, and interface with Navy COR and TPOC at SWRMC San Diego.

Similar Contracts

Same NAICS industry code

Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Small Business Subcontracting Support (Administrative & Compliance)The contract requires support to assist a prime contractor in meeting small business subcontracting plan compliance, reporting obligations, and maintaining all necessary Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement documentation to satisfy evaluation criteria. This administrative and compliance-focused engagement ensures that subcontracting goals are accurately tracked, reported, and aligned with federal requirements, thereby securing favorable evaluations during contract performance reviews. The work will involve ongoing monitoring of subcontractor performance, preparation of required submissions, and adherence to procedural guidelines to maintain compliance throughout the contract lifecycle. The solicitation is classified under NAICS code 541611 and is issued by the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, with a response deadline of August 28, 2026. The type of procurement is designated as a subcontract, indicating the work is part of a larger prime contract effort. No specific set-aside classification or place of performance details are provided, and no point of contact information is listed. The task remains centered entirely on administrative and compliance functions to uphold the integrity of the prime contractor’s small business subcontracting program as mandated by federal regulations.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 23 hours ago

DEADLINE

Regulatory and Compliance SupportThe contract seeks ongoing compliance support to ensure adherence to NIST SP 800-171, DFARS 252.204-7012, and CDTE reporting requirements, with a focus on protecting Controlled Unclassified Information. Key deliverables include the development and maintenance of a System Security Plan and the timely submission of required reports through DIBNet. All activities must align with federal cybersecurity standards for defense industrial base contractors handling sensitive government information. This is a small business set-aside subcontract under the NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026. The work is intended for a total small business contractor, and performance will be conducted under the auspices of the Defense Industrial Base network, where regulatory adherence is critical to securing federal contracts. All support services must be delivered in a manner that sustains continuous compliance and minimizes exposure to data breaches or noncompliance penalties.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Construction Management And/Or Project Management Planning For Districtwide Projects

Solicitation # 20260728030

The contract pertains to construction management and/or project management planning for districtwide projects under solicitation number 20260728030, issued by the Rancho Santiago Community College District in California. The opportunity is classified under NAICS code 541611, indicating professional, scientific, and technical services related to architectural and engineering activities, and is targeted toward state and local government entities. All work must be performed in Santa Ana, California, with a zip code of 92706, and the solicitation was posted on July 29, 2026. Interested parties must submit responses by August 20, 2026, at 9:00 PM Pacific Time. The primary point of contact for inquiries is facilitiesrfp@rsccd.edu, and additional information can be found through the provided BidAmerica portal link. This procurement does not specify any small business set-aside programs or additional eligibility requirements beyond the scope of the work being offered.

Rancho Santiago Community College District

POSTED

DEADLINE

Capability Statement Development and Proposal SupportThe contract seeks the development of capability statements and compliance documentation to support a sole-source justification under FAR 12.102(a), specifically for NASA Shared Services Center under the National Aeronautics and Space Administration. The work involves drafting clear, persuasive narratives and evidence-based materials that demonstrate the unique qualifications and specialized expertise of a contractor, enabling NASA to justify awarding a contract without competitive bidding. The deliverables must align with federal acquisition regulations and be structured to meet rigorous internal review standards for sole-source procurements. The submission deadline is August 3, 2026, and the performance location is in Houston, Texas, with the North American Industry Classification System code 541611 indicating management, scientific, and technical consulting services. This is a subcontract opportunity, meaning the winning entity will be engaged by a prime contractor or another subcontractor rather than directly by the government. The effort requires precision in documentation, deep familiarity with federal compliance frameworks, and the ability to synthesize technical capabilities into convincing, audit-ready justification materials that satisfy NASA’s procurement requirements.

NASA Shared Services Center

POSTED

DEADLINE

Compliance and Regulatory Certification SupportThe contract titled Compliance and Regulatory Certification Support is a subcontract aimed at assisting offerors in developing and submitting comprehensive compliance documentation required for lease applications under specific federal regulations including NDAA Section 889, ABAAS, seismic safety, fire safety, and NEPA environmental review standards. The work entails guiding proposers through complex regulatory frameworks to ensure all technical and legal requirements are met accurately and timely, reducing the risk of submission rejection due to noncompliance. The effort is focused on enabling successful lease submissions by providing expert certification support across multiple domains of federal regulatory obligation. The contract was posted on July 29, 2026, with a response deadline of August 28, 2026, at 8:30 PM Eastern Time, and falls under NAICS code 541611 for Management Consulting Services. It is managed by the FPAC Bus Cntr-Mgmt Svs Division under the U.S. Department of Agriculture, with performance expected to occur in Derwood. While no set-aside designation or point of contact is specified, the scope clearly targets specialized regulatory advisory services tailored to government leasing initiatives requiring rigorous compliance vetting. All support activities must align with federal protocols and deliver certified documentation suitable for official review.

Fpac Bus Cntr-Mgmt Svs Division

POSTED

DEADLINE

Technical Report Writing and DocumentationThe contract requires the preparation of a final digital AWMA report that includes detailed methodology, findings, mapped data, and conclusions, all fully aligned with federal reporting standards. The deliverables must be comprehensive and technically rigorous, ensuring accuracy and compliance with established government protocols for documentation and data presentation. This effort is classified as a subcontract under a Small Business Set Aside, specifically designated for total small business participation, and is governed by the NAICS code 541611 for scientific and technical consulting services. The solicitation was posted on July 29, 2026, with a firm deadline for responses set for August 12, 2026, at 4:00 p.m. The contracting entity is the Department of Agriculture through its FPAC Business Center Acquisition Division, with the place of performance and point of contact details not provided. All work must be completed in accordance with federal guidelines and submitted in digital format as specified.

Fpac Bus Cntr-Acq Division

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThis contract requires the performance of origin inspection, testing, and documentation services to ensure full compliance with contractual obligations and the Federal Acquisition Regulation clause 52.246. The work is focused on verifying that all materials and processes meet required quality standards prior to acceptance, with an emphasis on traceability, certification, and adherence to defense procurement guidelines. The services are critical to maintaining integrity in the supply chain and must be executed with precision to satisfy Department of Defense requirements. The contract is classified as a subcontract under the SBA Certified Women-Owned Small Business (WOSB) Program Sole Source authority, reserved exclusively for businesses certified under the WOSB program. It falls under NAICS code 541611 for Management, Scientific, and Technical Consulting Services and is assigned to the Department of Defense through its DLA Aviation office in Chambersburg, Pennsylvania, with the place of performance located at 17201. Interested parties must submit responses by August 28, 2026, to be considered for award under this sole-source opportunity.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Prohibited Telecommunications Equipment Compliance ReviewThe contract requires conducting comprehensive supply chain due diligence to verify that no covered telecommunications equipment or services, as defined under applicable federal regulations, are present in any products or services provided under the subcontract. This includes evaluating all tiers of the supply chain to ensure compliance with the prohibition on using equipment from specified foreign adversaries, with a primary focus on adhering to the requirements of DFARS 252.204-7018. Detailed documentation must be prepared and maintained to demonstrate thorough vetting and certification of all suppliers and components, ensuring full alignment with Department of Defense cybersecurity and procurement standards. The subcontract is issued by the Naval Surface Warfare Center Crane, part of the Department of Defense, with performance to occur in Crane, Indiana, 47522. The solicitation was posted on July 29, 2026, with a hard deadline for responses on August 5, 2026. The contract falls under NAICS code 541611, which pertains to management, scientific, and technical consulting services, indicating the nature of the work is advisory and compliance-oriented rather than operational. There is no set-aside designation, and the submission is open to eligible subcontractors capable of fulfilling the strict compliance and documentation requirements necessary for DoD contractual obligations.

POSTED

DEADLINE

Cybersecurity Compliance & CMMC Implementation SupportThe contract seeks support for achieving and maintaining CMMC Level 2 compliance under the Department of Defense’s cybersecurity framework, with a focus on executing self-assessments, submitting System for Award Management Performance and Risk Summary (SPRS) data, developing comprehensive cybersecurity policies aligned with NIST SP 800-171, and delivering employee training on DFARS requirements for cyber incident reporting. Services will be delivered to ensure the organization meets all mandatory controls and documentation standards necessary for CMMC Level 2 certification, with an emphasis on practical implementation and readiness for audits. Work is to be performed at the Crane location in Indiana, and the subcontract is managed by the Naval Surface Warfare Center, Crane Division. The solicitation was posted on July 29, 2026, with a firm response deadline of August 5, 2026, and falls under the NAICS code 541611 for Management, Scientific, and Technical Consulting Services. The effort requires expertise in defense cyber compliance, including a clear understanding of the CMMC framework, DFARS clause 252.204-7012, and the ability to guide internal teams through documentation, training, and reporting obligations without external oversight.

POSTED

DEADLINE

Project Management and ReportingThe contract involves end-to-end project management services with a requirement to develop a comprehensive Project Plan within five business days of award and to submit weekly status reports through the WAWF system. The work is classified as a subcontract under NAICS code 541611, indicating management consulting services, and is being procured by the Navsup Flc Sigonella Naples Office, a component of the Department of Defense. The place of performance is specifically designated as Gaeta, with no other location details provided. The solicitation was posted on July 29, 2026, and responses are due by August 17, 2026, at 8:00 a.m., establishing a tight timeline for proposal submission. There is no specified set-aside type or point of contact details, and the contract does not include information on funding or performance metrics beyond the reporting obligations.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Prohibited Technology Compliance & ReportingThe contract requires the implementation and maintenance of compliance processes to strictly prohibit the use of telecommunications equipment from covered foreign entities as mandated by Section 889 of the National Defense Authorization Act. This includes establishing robust systems to identify, audit, and report on all telecommunications and video surveillance equipment used in performance of the work to ensure no prohibited infrastructure from designated foreign adversaries is present or utilized. The contractor must maintain documented procedures for ongoing monitoring, employee training, and vendor vetting to sustain compliance throughout the contract term. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, with the North American Industry Classification System code 541611 indicating it pertains to management consulting services. The work is to be performed in Tampa, Florida, with a response deadline of August 6, 2026, and was posted on July 29, 2026. The contract is managed by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8, and adherence to Section 889 compliance is critical for contract award and continued performance.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

More opportunities from Department Of Defense → Southwest Regional Maintenance Center

Same awarding agency

Travel Support for Off-Site DeliverablesThe contract titled Travel Support for Off-Site Deliverables is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, designated for entities owned and controlled by service-disabled veterans, as outlined under FAR 19.14. It is assigned the NAICS code 561520, which classifies it under Travel Arrangement and Reservation Services, and is managed by the Southwest Regional Maintenance Center, a unit within the Department of Defense. The primary objective is to provide comprehensive travel logistics support for personnel conducting off-site tasks at MARMC and NSWC Dahlgren Division, encompassing the full spectrum of travel-related services including per diem allowances, lodging accommodations, and transportation arrangements, all in strict adherence to federal government compliance standards. Performance of the contract is required at the San Diego location with the zip code 92136, indicating that the majority of travel operations will support activities in and around this region. The solicitation was posted on July 28, 2026, with a response deadline of August 28, 2026, giving interested SDVOSB vendors approximately one month to submit proposals. The subcontractor will be responsible for ensuring timely, efficient, and compliant travel procurement and coordination for government personnel, requiring detailed knowledge of DoD travel regulations, budgetary constraints, and security protocols, while maintaining full accountability for all expenditures and documented procedures related to travel services.

POSTED

DEADLINE

Technical Writing & Documentation SupportThe contract requires the production and ongoing maintenance of technical documentation, user guides, and system manuals for the NAVSEA Fusion Suite, ensuring full compliance with U.S. Navy standards. Work involves creating clear, accurate, and standardized documentation that supports operational use, training, and system sustainment, with an emphasis on precision and regulatory adherence. The deliverables must align with military technical writing conventions and be tailored for end users within the Navy’s maintenance and technical communities. This subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, as defined by FAR 19.14, and falls under NAICS code 541930 for other professional, scientific, and technical services. The place of performance is in San Diego, California, with a response deadline of August 28, 2026. The contracting activity is managed by the Southwest Regional Maintenance Center under the Department of Defense, and the work is critical to ensuring the usability, reliability, and operational readiness of the NAVSEA Fusion Suite across naval systems.

Translation and Interpretation Services

POSTED

DEADLINE

Fusion Suite Software Development & CustomizationThe contract targets the development, customization, and integration of backend modules within the NAVSEA Fusion Suite to align with the operational workflows of the Southwest Regional Maintenance Center. The work must be performed in San Diego, California, and demands strict adherence to NIST SP 800-171 Rev 2 standards for protecting controlled unclassified information, ensuring robust cybersecurity practices are embedded into all software components. The effort is scoped to enhance system functionality specifically for maintenance and logistical operations under the Department of Defense, requiring deep technical expertise in backend architectures and secure software integration. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, designated under NAICS code 541512 for Custom Computer Programming Services. The solicitation was posted on July 28, 2026, with a firm response deadline of August 28, 2026, allowing interested parties to prepare and submit proposals within a one-month window. Although no specific point of contact or funding details are provided, performance location is clearly defined, and compliance with federal acquisition regulations for SDVOSB set-asides is mandatory. All deliverables must be fully functional, secure, and tailored to meet the unique mission requirements of the Southwest Regional Maintenance Center without deviation from mandated security protocols.

Computer Systems Design Services

POSTED

DEADLINE

Fusion Suite System Analysis & Requirements EngineeringThe contract requires the performance of system analysis and requirements engineering for the NAVSEA Fusion Suite, with a focus on translating business needs into clear technical specifications that align with CMMI and IEEE 12207.0 standards. The work involves understanding operational requirements, defining system architecture, and ensuring that all technical deliverables meet rigorous engineering and process compliance benchmarks. This effort is critical to supporting the integration and enhancement of the Fusion Suite as a key capability for naval maintenance and operations. This subcontract is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under FAR 19.14 and falls under NAICS code 541511 for Computer Systems Design Services. The place of performance is located in San Diego, California, with the Southwest Regional Maintenance Center, under the Department of Defense, as the contracting entity. The solicitation was posted on July 28, 2026, and responses are due by August 28, 2026, providing potential contractors with a one-month window to prepare and submit proposals. All work must be executed in accordance with federal procurement guidelines and must support national defense objectives through technically sound and standardized systems development.

Custom Computer Programming Services

POSTED

DEADLINE

FUSION SUPPORT - system analysis, software and system engineering and analysis, development, application and customization, and technical writing services.

Solicitation # N5523626Q0102

This is a service-disabled veteran-owned small business (SDVOSB) set-aside solicitation for fusion support services under FAR Part 12, requiring firm-fixed-price quotations for system analysis, software and systems engineering, application customization, and technical writing services to support the Southwest Regional Maintenance Center. The work is scoped to enhance the NAVSEA Fusion Suite for ship repair and procurement management, with performance to be conducted at the San Diego, California facility. Only vendors verified as SDVOSBs through SAM and VetCert are eligible, and all proposals must be submitted electronically in three volumes—technical, price, and past performance—by August 28, 2026, at 2:00 PM Pacific Time. Evaluation follows a lowest price technically acceptable (LPTA) approach, beginning with SDVOSB status verification, followed by a pass/fail assessment of technical acceptability based on understanding of requirements, proposed methodology, management plan, and resources, then past performance review, with award going to the lowest-priced technically acceptable offeror. The contract includes options for three additional one-year periods extending through September 2029, with delivery terms F.O.B. Destination and inspection performed by the Government at the performance site. Offerors must comply with all representations and certifications under FAR 52.212-3 and DFARS clauses, including cybersecurity safeguards, supply chain risk, and disclosure of organizational conflicts of interest, and must maintain active SAM registration. All personnel must obtain a Common Access Card within 60 days of award and complete mandatory security, privacy, and cyber awareness training. Invoicing must be submitted through Wide Area WorkFlow, and standard commercial warranties apply. Questions must be received by August 12, 2026, and submitted solely to the designated Navy email addresses.

Engineering Services

POSTED

DEADLINE

Packaging, Marking, and Preservation ServicesThe contract requires the provision of compliant packaging, preservation, and labeling services for repaired components destined for the Southwest Regional Maintenance Center in San Diego, California. All packaging and labeling must strictly adhere to NAVSEA standards to ensure the integrity and traceability of components during transit and storage. Each shipment must include a detailed itemized packing list that accurately reflects the contents, enabling seamless receipt, verification, and inventory management at the destination facility. Performance is expected to be conducted in full compliance with federal and military logistics protocols, with an emphasis on environmental protection, corrosion prevention, and secure handling of sensitive or mission-critical components. The contract is classified as a subcontract under NAICS code 561910, and responses are due by August 13, 2026. The place of performance is located in San Diego with a zip code of 92136, and all work must align with the expectations set by the Department of Defense through the Southwest Regional Maintenance Center.

Packaging and Labeling Services

POSTED

DEADLINE

Third Stage Piston Ring Set Supply/InstallationThe contract pertains to the supply and/or replacement of the third stage piston ring set with part number 1W139489 for a high-pressure air compressor, encompassing full service delivery from inspection through installation and final performance verification. The work is required to ensure the compressor operates at optimal efficiency and safety standards, with all components meeting strict military-grade specifications. The effort is classified as a subcontract and falls under NAICS code 332996, indicating it involves other fabricated metal product manufacturing activities tied to precision mechanical components. Performance of the work must occur at the designated location in San Diego, California, with a zip code of 92136, under the oversight of the Southwest Regional Maintenance Center, a division of the Department of Defense. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM local time. While no set-aside designation or specific agency contact information is provided, the contract is actively open for eligible subcontractors seeking to support critical defense maintenance operations. All bidders are expected to demonstrate technical capability, quality assurance protocols, and experience with military-grade compressor systems to meet the operational demands of the DoD. The work must be completed in accordance with the specified technical requirements, and verification of post-installation performance is mandatory to confirm system integrity and service life extension.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Fourth Stage Piston Seal Set Supply/InstallationThe contract encompasses the supply and installation of a piston seal set with part number ML12522256G1 for the fourth stage of a high-pressure air compressor, requiring precise seal fitment, comprehensive leak testing, and seamless integration into the existing system. All work must meet stringent performance and reliability standards critical to the operational integrity of the compressor, ensuring optimal pressure retention and long-term durability under high-stress conditions. The task involves not only delivering the correct seal components but also executing the installation with certified procedures and verifying system performance through rigorous testing protocols. The contract is designated as a subcontract under NAICS code 326220 and is managed by the Southwest Regional Maintenance Center under the Department of Defense. The work is to be performed in San Diego, California, with a response deadline of August 13, 2026, at 6:00 PM. The solicitation was posted on July 24, 2026, and no set-aside provisions apply, meaning all qualified vendors may submit proposals. The facility is responsible for maintaining full traceability of parts and documentation throughout the installation process to ensure compliance with defense procurement standards and to support future maintenance and audit requirements.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Second Stage Piston Rings Supply/InstallationThe contract pertains to the supply and/or installation of second stage piston rings with part number 1W139488 for high-pressure air compressors, encompassing full fitment, compression testing, and seamless integration into existing systems. Work must be executed to meet stringent operational standards for military-grade equipment, ensuring reliability under demanding conditions. Performance is required at the designated location in San Diego, California, with a zip code of 92136, and is categorized under NAICS code 332996 for other fabricated metal product manufacturing. This is a subcontract opportunity issued by the Southwest Regional Maintenance Center under the Department of Defense, with proposals due by August 13, 2026, at 6:00 p.m. The solicitation was posted on July 24, 2026, and interested parties must respond within the specified window to be considered for award.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

First Stage Cylinder Liner Repair/ReplacementThe contract calls for the repair or replacement of the first stage cylinder liner with part number 37560927 for a high-pressure air compressor, encompassing full operational procedures including disassembly, thorough inspection, precision machining, reassembly, and rigorous testing to ensure performance and safety standards are met. All work must be performed to meet military-grade specifications and maintain the integrity of the compressor system under high-pressure operational conditions. This subcontract is managed by the Southwest Regional Maintenance Center under the Department of Defense, with performance required at the location in San Diego, California, specifically at zip code 92136. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM. The North American Industry Classification System code 332994 applies, indicating the work falls under other fabricated metal product manufacturing, and the effort supports critical defense infrastructure requiring specialized technical expertise and compliance with federal maintenance protocols.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Unable to Determine Subcontract OpportunitiesA subcontract opportunity has been posted with the title "Unable to Determine Subcontract Opportunities" by the Southwest Regional Maintenance Center under the Department of Defense, with a posted date of July 24, 2026, and a response deadline of August 13, 2026. Due to a configuration error, the prime contract details could not be retrieved, which has prevented the identification or decomposition of any subcontract opportunities. As a result, no solicitation number, NAICS code, set-aside information, or point of contact is available. The place of performance is listed as San Diego, California, with a zip code of 92136, but the city, state, and country for the office address remain unspecified. The opportunity is accessible through the provided SAM.gov link, though no further contract specifics can be determined at this time.

POSTED

DEADLINE

N5523626Q0092 -USS STETHEM (DDG-63) HPAC COMP

Solicitation # N5523626Q0092

The U.S. Navy’s Southwest Regional Maintenance Center is soliciting a sole-source quotation for repair components to support the Curtis-Wright HPAC Model N20NL-12A/B onboard the USS STETHEM (DDG-63) at Naval Base San Diego, under the authority of FAR 12.102(a) and FAR 6.103-1(b), which justify acquisition from a single source as the Original Equipment Manufacturer. This procurement, classified under NAICS code 333912 (Air and Gas Compressor Manufacturing), follows commercial item procedures under FAR Part 12 and incorporates all applicable provisions and clauses effective through Federal Acquisition Circular 2026-01 and DFARS Publication Notice 20260702. The solicitation explicitly prohibits competitive bidding and requires the offeror to provide detailed pricing, availability, and delivery timelines consistent with the specified Product Description. Quotes must be submitted via email to two designated Navy procurement representatives no later than 13 August 2026 at 11:00 AM Pacific Time, with late submissions disqualified. Evaluation will follow a Lowest Price Technically Acceptable (LPTA) approach, prioritizing technical acceptability—specifically the ability to meet the Required Delivery Date with preference given to shorter lead times—followed by price reasonableness and past performance as assessed through the Supplier Performance Risk System. All offers must comply with FAR and DFARS clauses related to commercial items, including warranties, packaging standards, F.O.B. Destination terms, and government inspection at the point of delivery. Offerors are required to maintain current representations and certifications in the System for Award Management (SAM) or complete applicable sections of FAR 52.212-3. Numerous security, labor, environmental, and compliance clauses apply, including those governing cybersecurity, anti-trafficking, Buy American requirements, export controls, and prohibitions on certain telecommunications equipment. Failure to submit complete documentation or meet submission deadlines will result in disqualification, with no alternative solicitation to be issued.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE