Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Third Stage Piston Ring Set Supply/Installation

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply and/or replacement of the third stage piston ring set with part number 1W139489 for a high-pressure air compressor, encompassing full service delivery from inspection through installation and final performance verification. The work is required to ensure the compressor operates at optimal efficiency and safety standards, with all components meeting strict military-grade specifications. The effort is classified as a subcontract and falls under NAICS code 332996, indicating it involves other fabricated metal product manufacturing activities tied to precision mechanical components. Performance of the work must occur at the designated location in San Diego, California, with a zip code of 92136, under the oversight of the Southwest Regional Maintenance Center, a division of the Department of Defense. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM local time. While no set-aside designation or specific agency contact information is provided, the contract is actively open for eligible subcontractors seeking to support critical defense maintenance operations. All bidders are expected to demonstrate technical capability, quality assurance protocols, and experience with military-grade compressor systems to meet the operational demands of the DoD. The work must be completed in accordance with the specified technical requirements, and verification of post-installation performance is mandatory to confirm system integrity and service life extension.

General Info

Supply and install third-stage piston ring set 1W139489 for military-grade air compressor in San Diego by August 13, 2026.

Agency

Department Of Defense → Southwest Regional Maintenance CenterView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

San Diego, CA, 92136, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Southwest Regional Maintenance Center
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Southwest Regional Maintenance Center
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and/or replacement of the third stage piston ring set (P/N: 1W139489) for a high-pressure air compressor, including inspection, installation, and performance verification.

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Manufacturing of Quick Disconnect Coupling Half (NSN 4730-01-399-0241)The contract entails the full-scale manufacturing of a military-specification quick disconnect coupling half, adhering strictly to Army Drawing 19207-12342947 and SQAP013990241, ensuring compliance with all defense-grade quality and performance standards. Production must encompass not only the fabrication of the component but also integrated surge and sustainment planning to support long-term operational readiness and logistics requirements for the U.S. military. The item is designated by NSN 4730-01-399-0241 and falls under NAICS code 332996, indicating specialized manufacturing within the defense supply chain. This is a subcontract opportunity issued by LAND SUPPLIER OPERATIONS SMSG under the Department of Defense, with a response deadline of August 23, 2026, and a posted date of July 24, 2026. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors, and no point of contact or place of performance details are provided. All production activities must meet rigorous military specifications, and successful proposers are expected to demonstrate capacity for consistent, high-volume output, quality assurance, and supply chain reliability to sustain operational needs over time.
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332996
New
DIBBS
CONNECTOR, MULTIPLE,The contract pertains to the procurement of a MULTIPLE CONNECTOR, identified by part number NAS554-8 and NSN 4730-01-625-7039, with a requirement for six units to be delivered within five days of award. The item must comply with non-government standards NAS554 Revision 4 dated 08/26/2011 and SAE AS4841 Revision D dated 04/01/2021, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E, with specific packaging codes, materials, and methods outlined, and marking must conform to MIL-STD-129 without special marking codes. Palletization follows DLA packaging requirements, and the delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at origin, and a Certificate of Conformance is authorized unless superseded by a Quality Assurance Letter of Instruction. The contract specifies the freight forwarder as Northrop Grumman Corp at a staging area in Melbourne, FL, with a final delivery destination in France. The purchase request number is 7016347413, unit price is $6.00 per each, totaling $36.00, and the original required delivery date is July 25, 2024. The solicitation number is SPE7M0-26-T-6925, issued under full and open competition with no set-aside, and the NAICS code is 332996. The contract is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
BOLT, FLUID PASSAGEThe contract solicitation SPE7M4-26-T-256H calls for 14 units of BOLT, FLUID PASSAGE with NSN 4730-01-460-5325, a restricted-source item manufactured exclusively to OEM drawings, with only prequalified sources eligible to respond. Delivery is required within five days of order placement to Tinker AFB, Oklahoma, with FOB Origin terms and inspection and acceptance also performed at origin. The item must comply with stringent marking requirements per MIL-STD-130, including NSN, part number, manufacturer’s CAGE code, date of manufacture, and the “FOR MILITARY USE ONLY” designation, while packaging and labeling adhere to ASTM D3951, RP001, and MIL-STD-129 with standardized barcoding for logistics automation. Safety and environmental compliance is mandated through DFARS clauses prohibiting hexavalent chromium, hazardous material storage, and toxic substance disposal, alongside mandatory submission of Safety Data Sheets aligned with OSHA HazCom standards. Cybersecurity requirements are extensive, including implementation of NIST SP 800-171 controls via clause 252.240-7997, safeguarding covered defense information per 252.204-7012, and reporting cyber incidents immediately; the contractor must be CMMC Level 2 certified. Prohibitions extend to acquisition of telecommunications equipment from designated Chinese military companies and use of mandatory arbitration agreements. The contract mandates electronic invoicing via WAWF and requires offerors to provide their UEI and CAGE code, with full socioeconomic and small business status representations submitted. All submissions are strictly electronic through DIBBS by the July 29, 2026 deadline, and while pricing data is unspecified, historical unit costs suggest a variable range. The contract type remains undetermined pending award, but it includes standard FAR and DFARS clauses on payment acceleration, subcontracting, changes, defaults, and contractor liability, with administrative details like DoDAAC and point of contact to be finalized upon award.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
LATERAL, PIPE
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK DISCONNECTThe solicitation SPE7MX-26-R-X038 seeks offers for the Coupling Half, Quick Disconnect with NSN 4730-01-399-0241, issued by the Department of Defense through Land Supplier Operations SMSG. Offerors must carefully review and complete all required fields in the Pricing and Delivery Spreadsheet, including manufacturing CAGE codes and drawing information, while also addressing all contractor fill-ins throughout the solicitation document. Product compliance is strictly tied to the officially designated Product Item Description (PID) referenced in the solicitation, which supersedes any conflicting information posted on DIBBS unless formally amended by the Contracting Officer, and this PID will form a binding part of any resulting contract. Packaging, marking, inspection, acceptance points, and F.O.B. terms are specified in the attached PID Packaging Marking document and Pricing and Delivery Spreadsheet, and offerors must adhere precisely to these requirements. All submitted proposals must reflect the exact specifications and conditions outlined in the attachments, which remain active and enforceable through the life of the contract unless revised by official modification.
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
Federal
Second Stage Piston Rings Supply/InstallationThe contract pertains to the supply and/or installation of second stage piston rings with part number 1W139488 for high-pressure air compressors, encompassing full fitment, compression testing, and seamless integration into existing systems. Work must be executed to meet stringent operational standards for military-grade equipment, ensuring reliability under demanding conditions. Performance is required at the designated location in San Diego, California, with a zip code of 92136, and is categorized under NAICS code 332996 for other fabricated metal product manufacturing. This is a subcontract opportunity issued by the Southwest Regional Maintenance Center under the Department of Defense, with proposals due by August 13, 2026, at 6:00 p.m. The solicitation was posted on July 24, 2026, and interested parties must respond within the specified window to be considered for award.
Southwest Regional Maintenance Center

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332996
New
Federal
Supply of Replacement Pump Components (Seals, Bearings, Gaskets)The contract seeks the supply of replacement pump components including mechanical seals, bearings, shaft sleeves, and gaskets that must comply with Buy American requirements for FLOWSERVE 2K6X4V-13RV-CD4 pumps. All items must meet stringent domestic sourcing standards to ensure full compliance with federal procurement regulations. The components are intended for use in critical operations and must be interchangeable with original equipment specifications to maintain performance and reliability. The solicitation is classified as a subcontract under NAICS code 332996 and is issued by the Department of Homeland Security through its Sflc Procurement Branch 1. Responses are due by July 30, 2026, at 1:00 PM, with the opportunity posted on July 24, 2026. No specific place of performance or point of contact is listed, and the contract does not include a set-aside designation.
Sflc Procurement Branch 1(00080)

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332996
New
Federal
47--COUPLING HALF,QUICK
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
DIBBS
Rigid Shaft Coupling Manufacturing and SupplyThe contract seeks a subcontractor to manufacture, perform quality assurance, package, and deliver rigid shaft couplings in compliance with military and federal standards, specifically MIL-STD-129 and ASTM D3951, with delivery terms based on FOB origin. The work involves full production responsibility including adherence to strict governmental specifications for materials, tolerances, testing, and labeling to ensure interoperability and reliability in defense applications. All items must be prepared for shipment under the mandated packaging protocols to maintain integrity during transport and storage within the defense supply chain. The solicitation is posted under the NAICS code 332996 for other fabricated metal product manufacturing and initiated by the Strategic Acquisition Program Directorate within the Department of Defense. Responses are due by July 28, 2026, with no set-aside classification indicated, meaning all eligible businesses may compete. Deliveries must originate from the supplier’s facility, and the contractor is expected to manage end-to-end production and logistics in alignment with defense quality expectations, though no specific place of performance or point of contact is listed in the provided data.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332996
New
DIBBS
V-Belt Supply and Delivery (NSN 3030015138178)Approximately 11 military-specification V-belts, identified by NSN 3030-01-513-8178, are being procured under a subcontract issued by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement mandates full compliance with both military and commercial specifications, ensuring suitability for defense-grade applications. Delivery is structured on an FOB origin basis, meaning title and responsibility transfer to the buyer at the supplier’s location, with a firm lead time of 59 days from the date of order confirmation. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and the contract falls under NAICS code 332996, which covers other fabricated metal product manufacturing. The performance location and point of contact details are not specified, but the procurement is accessible via the DIBBS portal for further vendor submission and tracking.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332996
New
SLED
Supply of Industrial BearingsThe Trinity River Authority of Texas is seeking qualified vendors to supply industrial mechanical bearings for use in the ongoing maintenance and operation of water and wastewater infrastructure systems. This subcontract solicitation, posted on July 23, 2026, with a response deadline of August 12, 2026, falls under NAICS code 332996, which classifies the manufacturing of other fabricated metal products, including bearings. The procurement involves the delivery of bearings critical to the mechanical systems in treatment plants, pumping stations, and related facilities, requiring components that meet rigorous standards for durability, load capacity, and resistance to environmental stressors common in water service environments. Bidders must be prepared to provide bearings compatible with existing equipment and capable of supporting continuous, high-demand operations under harsh conditions. The contract does not specify a set-aside classification or target small business participation, and no point of contact or exact place of performance details are provided, though the work will be performed within Texas under the authority’s operational purview. Vendors are expected to submit bids that include detailed product specifications, compliance documentation, lead times, warranty terms, and pricing structures aligned with the authority’s maintenance schedules. While the physical delivery location is not enumerated, the bearings will be deployed across multiple facilities managed by the Trinity River Authority, necessitating reliable logistics and technical support capabilities. Interested parties must access the full solicitation through the provided UI link to review technical requirements and submission guidelines.
Trinity River Authority of Texas

POSTED

1 day ago

DEADLINE

in 18 days
View Details

More opportunities from Department Of Defense → Southwest Regional Maintenance Center

Same awarding agency

NAICS: 561910
New
Federal
Packaging, Marking, and Preservation ServicesThe contract requires the provision of compliant packaging, preservation, and labeling services for repaired components destined for the Southwest Regional Maintenance Center in San Diego, California. All packaging and labeling must strictly adhere to NAVSEA standards to ensure the integrity and traceability of components during transit and storage. Each shipment must include a detailed itemized packing list that accurately reflects the contents, enabling seamless receipt, verification, and inventory management at the destination facility. Performance is expected to be conducted in full compliance with federal and military logistics protocols, with an emphasis on environmental protection, corrosion prevention, and secure handling of sensitive or mission-critical components. The contract is classified as a subcontract under NAICS code 561910, and responses are due by August 13, 2026. The place of performance is located in San Diego with a zip code of 92136, and all work must align with the expectations set by the Department of Defense through the Southwest Regional Maintenance Center.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 326220
New
Federal
Fourth Stage Piston Seal Set Supply/InstallationThe contract encompasses the supply and installation of a piston seal set with part number ML12522256G1 for the fourth stage of a high-pressure air compressor, requiring precise seal fitment, comprehensive leak testing, and seamless integration into the existing system. All work must meet stringent performance and reliability standards critical to the operational integrity of the compressor, ensuring optimal pressure retention and long-term durability under high-stress conditions. The task involves not only delivering the correct seal components but also executing the installation with certified procedures and verifying system performance through rigorous testing protocols. The contract is designated as a subcontract under NAICS code 326220 and is managed by the Southwest Regional Maintenance Center under the Department of Defense. The work is to be performed in San Diego, California, with a response deadline of August 13, 2026, at 6:00 PM. The solicitation was posted on July 24, 2026, and no set-aside provisions apply, meaning all qualified vendors may submit proposals. The facility is responsible for maintaining full traceability of parts and documentation throughout the installation process to ensure compliance with defense procurement standards and to support future maintenance and audit requirements.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332994
New
Federal
First Stage Cylinder Liner Repair/ReplacementThe contract calls for the repair or replacement of the first stage cylinder liner with part number 37560927 for a high-pressure air compressor, encompassing full operational procedures including disassembly, thorough inspection, precision machining, reassembly, and rigorous testing to ensure performance and safety standards are met. All work must be performed to meet military-grade specifications and maintain the integrity of the compressor system under high-pressure operational conditions. This subcontract is managed by the Southwest Regional Maintenance Center under the Department of Defense, with performance required at the location in San Diego, California, specifically at zip code 92136. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM. The North American Industry Classification System code 332994 applies, indicating the work falls under other fabricated metal product manufacturing, and the effort supports critical defense infrastructure requiring specialized technical expertise and compliance with federal maintenance protocols.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 333912
New
Federal
N5523626Q0092 -USS STETHEM (DDG-63) HPAC COMPThe U.S. Navy’s Southwest Regional Maintenance Center is soliciting a sole-source quotation for repair components to support the Curtis-Wright HPAC Model N20NL-12A/B onboard the USS STETHEM (DDG-63) at Naval Base San Diego, under the authority of FAR 12.102(a) and FAR 6.103-1(b), which justify acquisition from a single source as the Original Equipment Manufacturer. This procurement, classified under NAICS code 333912 (Air and Gas Compressor Manufacturing), follows commercial item procedures under FAR Part 12 and incorporates all applicable provisions and clauses effective through Federal Acquisition Circular 2026-01 and DFARS Publication Notice 20260702. The solicitation explicitly prohibits competitive bidding and requires the offeror to provide detailed pricing, availability, and delivery timelines consistent with the specified Product Description. Quotes must be submitted via email to two designated Navy procurement representatives no later than 13 August 2026 at 11:00 AM Pacific Time, with late submissions disqualified. Evaluation will follow a Lowest Price Technically Acceptable (LPTA) approach, prioritizing technical acceptability—specifically the ability to meet the Required Delivery Date with preference given to shorter lead times—followed by price reasonableness and past performance as assessed through the Supplier Performance Risk System. All offers must comply with FAR and DFARS clauses related to commercial items, including warranties, packaging standards, F.O.B. Destination terms, and government inspection at the point of delivery. Offerors are required to maintain current representations and certifications in the System for Award Management (SAM) or complete applicable sections of FAR 52.212-3. Numerous security, labor, environmental, and compliance clauses apply, including those governing cybersecurity, anti-trafficking, Buy American requirements, export controls, and prohibitions on certain telecommunications equipment. Failure to submit complete documentation or meet submission deadlines will result in disqualification, with no alternative solicitation to be issued.
Air and Gas Compressor Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 333912
New
Federal
N5523626Q0104 - USS PAUL HAMILTON (DDG-60) HPAC COMPThis solicitation, N5523626Q0104, is a sole-source combined synopsis and solicitation issued by the Southwest Regional Maintenance Center under FAR Part 12 for commercial items required to repair the Curtis-Wright HPAC Model N20NL-12A/B aboard the USS PAUL HAMILTON (DDG-60) at Naval Base San Diego. The procured components are exclusively for the original equipment manufacturer, with no competitive bidding permitted under FAR 6.102-1(b), and the North American Industry Classification System code is 333912 for air and gas compressor manufacturing. All quotes must include product availability, delivery date, and price, with delivery terms specifying F.O.B. Destination, meaning inspection and acceptance occur upon arrival at the Navy facility. The government will evaluate offers using a lowest price technically acceptable (LPTA) approach, prioritizing vendors who can meet the required delivery date starting from the projected award date of August 13, 2026, with price considered second among technically acceptable responses. Past performance will be assessed using the Supplier Performance Risk System. The solicitation incorporates numerous far and dfars provisions and clauses, including those mandating compliance with Buy American Act requirements, cybersecurity maturity model certification, anti-trafficking policies, labor standards exemptions, warranty notifications, identification marking, environmental restrictions including mercury exclusion, and electronic invoicing through the System for Award Management. Offerors must validate their SAM registration, submit all required certifications in accordance with FAR 52.212-3, and ensure all proposals are received via email by August 13, 2026, at 11:00 AM Pacific time, with questions due no later than July 30, 2026, directed to Edward Condreay and Jorge Morales. No formal written solicitation will be issued beyond this announcement.
Air and Gas Compressor Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336611
New
Federal
Marine Boatyard Support and Industrial Support Lot III Follow-on MAC-IDIQThe Marine Boatyard Support and Industrial Support Lot III Follow-on MAC-IDIQ solicitation, identified by number N5523626R0016, is a total small business set-aside under FAR 19.5, targeting NAICS code 336611 for ship repair and maintenance services. The solicitation, issued by the Southwest Regional Maintenance Center under the Department of Defense, is open for responses until August 7, 2026, with proposals to be submitted to the updated email address 410B_RFP_26R0016_MBS_LOT_III@us.navy.mil, replacing the prior contact. Amendments have been made to update the RFP number from N5523625R0013 to N5523626R0016, specifically revising Sections C, J, and L to reflect correct referencing and administrative details, while all other contract terms and conditions remain unaltered. The primary point of contact is Natalie Arenz, with secondary support from Alondra Moreno, both located at the Southwest Regional Maintenance Center in San Diego, California, with a place of performance also designated in the same location.
Ship Building and Repairing

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 611519
New
Federal
WELDER TRAINING FOR DIVERSThis solicitation, N5523626Q0083, is a total small business set-aside under FAR Part 12 for the procurement of a welder training course for divers at the Southwest Regional Maintenance Center in San Diego, California. The requirement is for a four-week intensive program covering AWS-approved welding processes including Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW-S Short Circuit), GMAW Spray Transfer, and Flux Cored Arc Welding (FCAW), with training for up to four students. The training must be accredited by the American Welding Society and include an AWS Welding Test leading to qualification. The preferred period of performance is June 15, 2026, through September 30, 2026, and quotation responses must meet this timeline as a mandatory pass/fail criterion. In addition to training, the contractor must provide consumables such as welding rod and project plates per student, and personal protective equipment at $100 per student if not supplied by the student. The solicitation is open only to small businesses certified under NAICS code 611519 with a size standard of $21 million, and large business submissions are ineligible. Offerors must be registered in the System for Award Management (SAM) and submit quotes via email to designated Navy personnel no later than June 10, 2026, at 11:00 AM Pacific Time, with the solicitation number included in the subject line. All quotes must hold prices firm for 60 days and include required representations, the Unique Entity Identifier, and EFT information. The evaluation will follow a Lowest Price Technically Acceptable (LPTA) methodology, where technical acceptability is determined by meeting the period of performance and accreditation requirements, with price assessed for reasonableness under FAR 12.203. Past performance will be evaluated using the Supplier Performance Risk System. The contract incorporates numerous standard FAR and DFARS clauses, including those related to small business representation, subcontracting limits, labor standards, child labor, equal opportunity, combating human trafficking, minimum wage compliance, cybersecurity, and payment procedures via electronic funds transfer. Contract administration is governed by NAVSEA instructions for payment, invoicing, and point of contact responsibilities. The government will conduct inspections and accept the training deliverables at the place of performance, and award will be made without negotiations based on the initial offer. Additional
Other Technical and Trade Schools

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
Federal
Marine Boatyard Support and Industrial Support Lot II Follow-on MAC-IDIQThe Southwest Regional Maintenance Center is soliciting proposals under solicitation N5523625R0012 for Marine Boatyard Support and Industrial Support Lot II, a follow-on multiple award indefinite delivery/indefinite quantity contract with a five-year performance period comprising five annual ordering periods. The contract supports the repair, modification, upgrade, service life extension, and maintenance of non-commissioned vessels and equipment measuring 15 meters or 50 feet and longer, including boats, crafts, lighterage, habitability barges, service crafts, and ancillary support gear such as brows, platforms, and loading ramps, as well as smaller items requiring waterway delivery. Work includes dry-docking and dry-berthing at contractor facilities within a 125-mile radius of Naval Base San Diego, California, along with hull preservation, habitability conversions, and system upgrades for all related equipment and infrastructure. The Government will award contracts based on best-value determinations considering past performance, technical capability, and price, under FAR, DFARS, and NMCARS guidelines. Only small businesses with 1,300 or fewer employees, as defined by NAICS code 336611, are eligible, and all offerors must be registered in SAM and the PIEE Solicitation Module. A qualified quality system compliant with NAVSEA Standard Item 009-04 is mandatory at time of award. The RFP response deadline is July 30, 2026, and all awards will be issued as supply contracts resulting in mission-ready assets returned to fleet service.
Ship Building and Repairing

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 541611
Federal
Project Management and Technical OversightThe contract calls for comprehensive project management and technical oversight during a planned overhaul, with strict requirements to meet Navy standards, maintain a six-week completion timeline, and ensure seamless coordination with government personnel. The work is centered on providing expert supervision to guarantee schedule adherence and technical compliance throughout the duration of the project, focusing on efficiency and regulatory alignment. The scope is tied to a subcontract under the Department of Defense, managed by the Southwest Regional Maintenance Center, with all activities to be performed at the designated location in San Diego, zip code 92136. The NAICS code 541611 indicates that the services fall under management consulting activities, specifically emphasizing administrative management and oversight functions. The contract was posted on May 12, 2026, and while no solicitation number or set-aside details are provided, the emphasis remains on precise execution, accountability, and direct support to federal operations.
Administrative Management and General Management Consulting Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Technical Support for Aft Electronic Systems CoolingThis contract requires comprehensive engineering and technical support to maintain reliable thermal control for aft-mounted electronic systems during and after the AC plant overhaul at the Southwest Regional Maintenance Center in San Diego. The scope includes verifying thermal loads, integrating cooling systems with existing electronic architectures, and validating performance under operational conditions to ensure systems remain within safe temperature thresholds. All work must adhere to rigorous military standards to guarantee system reliability during and post-overhaul operations. The contract is classified as a subcontract under NAICS code 541330 for engineering services and is tied to a Department of Defense facility. Performance is localized exclusively at the San Diego site with ZIP code 92136, and the work is scheduled to be performed following a posting date of May 12, 2026. No set-aside provisions or solicitation number are specified, and no point of contact information is provided, indicating the contract may be awarded through an existing contractual relationship or internal procurement channel. Deliverables must ensure continued operational readiness of critical aft-mounted electronics under demanding environmental conditions.
Engineering Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333414
Federal
Marine HVAC System Overhaul and RepairThe contract calls for a complete Class B overhaul of the ship’s Number 4 Air Conditioning Plant, encompassing full disassembly, detailed inspection, repair or replacement of any failed components, and precise reassembly to restore full operational capability. The work is specifically focused on ensuring the system regains its intended cooling capacity to support aft electronic systems and maintain crew habitability, with rigorous testing and operational verification required to confirm performance meets all operational standards. The overhaul must be executed to meet naval maintenance specifications, ensuring reliability and durability under marine operating conditions. This subcontract is managed by the Southwest Regional Maintenance Center under the Department of Defense, with performance designated to occur in San Diego, California, at the 92136 ZIP code location. The work falls under NAICS code 333414, which pertains to HVAC equipment manufacturing and repair services, indicating the technical scope requires specialized knowledge in marine environmental control systems. The solicitation was posted on May 12, 2026, and while no set-aside designation or point of contact is provided, the contract is structured as a subcontract and is tied to the broader defense maintenance infrastructure supporting ship readiness and fleet sustainment.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

2 months ago

DEADLINE

N/A
View Details