Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Packaging, Marking, and Labeling (MIL-STD-129 & MIL-STD-130N)

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the packaging, marking, and labeling of shroud assemblies in strict compliance with MIL-STD-129 and MIL-STD-130N standards, ensuring all items are properly identified with barcoding that includes both Data Matrix and linear codes. Hazardous material handling procedures must be followed if applicable, and all assemblies must be palletized according to the RP001 specification to meet military logistics requirements. This subcontract is a total small business set-aside under the SBA program, with the NAICS code 561990 indicating it falls under other support services. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The work is to be performed under the terms of a U.S. government subcontract, and all activities must align with federal acquisition regulations governing defense contracting.

General Info

Packaging and labeling shroud assemblies per MIL-STD-129/130N, palletized per RP001, small business set-aside under NAICS 561990.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

561990 - All Other Support ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Package and label shroud assemblies per MIL-STD-129 and MIL-STD-130N, including barcoding (Data Matrix/linear), hazardous material handling (if applicable), and palletization per RP001.

Similar Contracts

Same NAICS industry code

FY26 FR0 DFS/PHL - RJM Sales NITROVAP Service AgreementThe contract pertains to the FY26 FR0 DFS/PHL - RJM Sales NITROVAP Service Agreement, forecasted for release on July 23, 2026, under the Forensic Sciences division of the District of Columbia. It involves the procurement of services related to NITROVAP technology, likely supporting forensic operations, though specific service deliverables are not detailed in the available data. The agreement is classified as a forecast, indicating it is a preliminary indication of future procurement intent rather than an active solicitation, and no set-aside information, NAICS code, or organizational type has been provided to define eligibility or classification. The place of performance and agency office address details are unspecified, and no point of contact is listed, suggesting that further information will be released upon formal solicitation. The contract is accessible via a public link on the District of Columbia’s contracts portal, allowing potential vendors to monitor for upcoming opportunities. As a forecast, this document serves to inform the market of anticipated spending in fiscal year 2026, enabling industry preparation without triggering immediate bidding or compliance obligations.

Forensic Sciences (DFS)

POSTED

about 6 hours ago

DEADLINE

Disabled Veteran Business Enterprise SubcontractingDisabled Veteran Business Enterprise subcontracting opportunities are available under this solicitation, allowing DVBE-certified businesses to participate as subcontractors. Their involvement may serve as a tiebreaker in bid evaluation or provide a preference factor to enhance competitiveness, while also exempting the prime contractor from the $10,000 final payment withholding typically imposed. The contract falls under NAICS code 561990 and is managed by the California agency Resources Recycling & Recovery, with performance required in Fresno. The solicitation was posted on July 22, 2026, and responses are due by August 7, 2026. There is no specified set-aside designation, and the opportunity is open to qualified DVBE firms seeking to support larger contracts through subcontracting arrangements.

Resources Recycling & Recovery

POSTED

about 24 hours ago

DEADLINE

Small Business Subcontracting ParticipationCertified Small Businesses in California can participate as subcontractors to support prime contractors in securing a 5% bid preference by performing mobile shredding services or related support functions under this subcontracting opportunity. The contract is tied to NAICS code 561990 and is administered by Resources Recycling & Recovery through the California agency, with work to be performed in Fresno. Small Businesses must be certified to qualify and must align their services to enable the prime contractor to meet eligibility requirements for the bid advantage. The solicitation is open for responses until August 7, 2026, and all participation must occur under the terms of this subcontracting arrangement without a formal set-aside designation. The opportunity is accessible through the CalE-Procure portal.

Resources Recycling & Recovery

POSTED

about 24 hours ago

DEADLINE

Onsite Mobile Shredding ServicesThe contract entails the provision of mobile, truck-mounted industrial shredding services for waste materials at locations specified by the client across California, requiring uninterrupted operational capacity to ensure consistent and reliable service delivery. The work is scoped to support industrial waste management needs with equipment capable of processing diverse materials on-site, eliminating the need for transportation to offsite facilities and enhancing efficiency and environmental compliance. Services must be performed with technical precision and adherence to California’s environmental and safety regulations. The solicitation is classified as a subcontract under NAICS code 561990 for other waste management services and is issued by Resources Recycling & Recovery under the California state agency framework. The place of performance is centered in Fresno, though services may extend across the state as directed by client requirements. Responses are due by August 7, 2026, following a posting date of July 22, 2026, with no set-aside provisions specified. The opportunity is available through the CalE-Procure portal and requires vendors to demonstrate proven capability in mobile industrial shredding operations, equipment reliability, and regulatory compliance within the region.

Resources Recycling & Recovery

POSTED

about 24 hours ago

DEADLINE

Packaging, Labeling & Marking Compliance (MIL-STD-129)The contract requires full compliance with MIL-STD-129 for the packaging, labeling, and marking of military items, with strict adherence to hazardous material identification and shelf-life coding standards, including the use of SPECIAL MARKING CODE 32. All labeling must be applied accurately to meet Department of Defense specifications, ensuring traceability, safety, and operational readiness for items shipped to the designated performance location in San Diego, California, 92152-5001. The work is classified as a subcontract under NAICS code 561990, which covers other support services, and the offering party must complete and submit their response by the deadline of August 3, 2026. The contracting activity is part of the LSO Combat Vehicles and Armament organization under the Department of Defense, and all deliverables must align with federal military logistics and compliance protocols without exception.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires specialized packaging and labeling of circuit breakers that contain hazardous materials, ensuring full compliance with OSHA and DFARS regulations. All packaging must include accurate Safety Data Sheets and properly formatted hazard warning labels to meet federal safety and documentation standards. The work is structured as a subcontract under the NAICS code 561990, indicating it falls under other support services, and is issued by the Department of Defense through its Maritime Supply Chain division. Performance of the contracted services is expected to align with defense supply chain requirements, though the specific place of performance is not designated. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, leaving a two-week window for interested parties to submit proposals. There is no set-aside designation specified, meaning the contract is open to all qualified contractors regardless of business size or status. The opportunity is accessible through the DIBBS platform, and while no point of contact is listed, all queries must be directed through the official system. The successful bidder will be responsible for the end-to-end handling of hazardous material packaging, ensuring that each circuit breaker unit is properly identified, documented, and shipped in accordance with all applicable military and occupational safety mandates.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Packaging, Labeling, and Hazardous Materials ComplianceThe contract requires full compliance with military and regulatory standards for packaging, labeling, and hazardous materials management, specifically adhering to ASTM D3951 for packaging, MIL-STD-129 for labeling, and OSHA HCS for safety data sheet preparation and hazard communication. All deliverables must meet exacting military specifications, including proper classification of hazardous materials, accurate labeling with required symbols and text, and the generation of compliant safety data sheets. The work is structured as a small business set-aside under SBA guidelines, ensuring eligibility is restricted to businesses certified as small under the NAICS code 561990, which covers other support services. The contract falls under the Department of Defense, specifically managed by LSO Combat Vehicles and Armament, with a submission deadline of August 6, 2026, and a posting date of July 22, 2026. Performance is expected to support defense logistics, though the precise location of performance is not specified, indicating possible nationwide or multi-site execution.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Hazardous Materials Packaging and MarkingThe contract requires specialized packaging and labeling of lead-acid batteries in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all hazardous materials are documented, marked, and prepared for military logistics and storage. A key requirement is the application of Type I shelf-life identification code 32, which specifies the storage duration and expiration timeline for the batteries, critical for operational readiness and safety. The work must be performed in accordance with defense regulations governing hazardous material handling, with all external markings and documentation meeting exact military specifications for identification, handling warnings, and traceability. The contract is classified as a subcontract under NAICS code 561990 and is managed by the Defense Logistics Agency under the Department of Defense. The place of performance is designated as FPO with ZIP code 09520, indicating delivery to a military postal facility, likely for overseas or expeditionary use. Responses are due by August 3, 2026, with the solicitation posted on July 22, 2026, giving potential bidders approximately two weeks to prepare submissions. The contract is not set aside for any specific small business categories and is open to any qualified subcontractor capable of meeting the rigorous packaging, labeling, and compliance standards for military-grade hazardous materials.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Preservation & Labeling ServicesThis contract requires comprehensive packaging, preservation, and labeling services strictly in accordance with military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly protected, preserved, and marked for military logistics and handling. All packaging must include orientation markings and compliant barcoding to support accurate tracking and identity verification throughout the supply chain. The solicitation is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 561990 indicating it falls under Other Support Activities. Performance of the work is mandated at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The proposal submission deadline is August 3, 2026, with the solicitation posted on July 22, 2026, and is managed by the Department of Defense through the Land Supply Chain organization.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Palletization & Unit Load AssemblyThe contract requires the assembly and securement of packaged cylinders onto pallets in strict compliance with DLA RP001 standards, ensuring proper dunnage, strapping, and load stability for safe transport. All work must prioritize cargo integrity and transport readiness, with procedures designed to prevent shifting, damage, or compromise during transit. The task is classified as a subcontract under NAICS code 561990 and is being managed by DLA DIST SAN JOAQUIN under the Department of Defense. Performance is required at the location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, with no set-aside type specified. Further details and submission protocols can be accessed through the provided DIBBS portal link.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Packaging and Marking Services for DoD ShipmentThe contract requires comprehensive packaging, preservation, and military-compliant marking services for Department of Defense shipments, strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. All procedures must include the application of 2D Data Matrix barcodes to ensure accurate tracking and readiness compliance. Services are to be executed at the designated place of performance in New Cumberland, Pennsylvania, 17070-5002, with full alignment to federal military logistics protocols. The work falls under NAICS code 561990 and is classified as a subcontract opportunity under the Construction & Equipment Manu & Con organization. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026. Participation is limited to entities capable of meeting exacting military packaging and marking requirements, with no set-aside status specified. All offerors must demonstrate proven experience in handling DOD-compliant materials and systems, including the technical implementation of 2D barcodes and preservation methods that safeguard equipment integrity during storage and transport. The contract is managed through the DLA’s DIBBS system, and all proposals must be submitted via the provided online portal prior to the stated deadline.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Temporary Traffic Control ServicesThe contract involves the provision of temporary traffic control services including the installation, maintenance, and removal of traffic control devices, signage, and flagging operations to ensure safe movement of vehicles and personnel during construction activities at the New Cumberland facility. Work is required to comply with all applicable federal and state standards for traffic control, with services to be performed on-site at the designated location with ZIP code 17070-5002. The procurement is structured as a subcontract under NAICS code 561990, which covers other support services, and is issued by the Department of Defense through the DDSP New Cumberland Facility. All responses must be submitted by August 3, 2026, and there is no set-aside designation specified for small businesses or other categories. The contract solicitation is accessible via the DIBBS portal under reference number SPE8E826T4786, with no point of contact listed for direct inquiries.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Cybersecurity and CUI Protection (NIST SP 800-171)The contract requires the implementation and ongoing maintenance of a comprehensive cybersecurity program aligned with NIST SP 800-171 Rev 1 standards, specifically designed to protect Controlled Unclassified Information. A core deliverable is the development of a fully documented System Security Plan that outlines policies, procedures, and controls to ensure compliance across all applicable security requirements. The contractor must also achieve and maintain the necessary assessment scores to validate adherence to the NIST framework, demonstrating that all required safeguarding measures are effectively in place and operational. This is a small business set-aside subcontract under the SBA’s Total Small Business Set-Aside program, with the NAICS code 541512 indicating it pertains to computer systems design services. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is open for responses until August 24, 2026, with performance expected to occur at an unlisted location. The successful vendor must demonstrate expertise in federal cybersecurity compliance, particularly in managing CUI within DoD contractor environments, and be prepared to support continuous monitoring, documentation, and assessment activities required to sustain certification under NIST SP 800-171 Rev 1.

Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Export Control and Technical Data ManagementThis contract requires the management of technical data under International Traffic in Arms Regulations and Export Administration Regulations, ensuring strict adherence to U.S. export control standards. The contractor must implement and maintain procedures to safeguard controlled technical information, prevent unauthorized access or disclosure, and comply fully with DFARS clause 252.225-7048 regarding foreign person access to restricted data. Additionally, the contractor must uphold compliance with the U.S. and Canada Joint Certification Program to facilitate secure cross-border collaboration on defense-related technical matters. The contract is designated as a total small business set-aside under FAR 19.5, making it available exclusively to small businesses as defined by the Small Business Administration. It falls under NAICS code 541611 for management and scientific consulting services and is issued under the Department of Defense through the ASC Supplier Oper AE and AF Division. Proposals are due by August 24, 2026, and performance will be conducted in compliance with all applicable defense and export control requirements without specified geographical limitations beyond the need to meet U.S. and Canadian regulatory obligations.

Administrative Management and General Management Consulting Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

First Article Testing (FAT) and Quality ComplianceThe contract requires execution of First Article Testing in strict accordance with the E08 FIRST ARTICLE TESTING REQUIREMENTS (MAR 2025) to verify full conformance to all specified technical data and to provide documented evidence of consistent and controlled manufacturing processes. This testing must demonstrate that the initial production units meet every design, performance, and quality criterion outlined in the technical documentation, ensuring that the supplier’s processes are capable of reproducibly delivering compliant products at volume. This is a subcontract issued under a Total Small Business Set-Aside by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, classified under NAICS code 541330, and is open exclusively to small businesses. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026. The place of performance and point of contact details are not specified, but the full solicitation can be accessed via the provided DIBBS link, and all submissions must comply with the requirements for certification of process control and technical compliance as mandated by the referenced E08 standard.

Engineering Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Welding Services (Class B per BAC 5975)The contract requires the performance of Class B welding on a shroud assembly in strict accordance with the BAC 5975 standard, with a specified weld size of 3/16 inch and full adherence to aerospace quality requirements. This work demands precision and compliance with industry-specific technical standards to ensure structural integrity and performance under high-stress aerospace conditions. The solicitation is designated as a total small business set-aside under SBA regulations, limiting participation to qualified small businesses as defined by FAR 19.5, and is classified under NAICS code 332420 for fabricated metal product manufacturing. The contract is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is open for response until August 24, 2026, with the posting date listed as July 23, 2026. While specific location details for performance or point of contact are not provided, the work is expected to be executed in alignment with defense supply chain protocols and quality assurance frameworks. Interested parties must access the full solicitation through the provided DIBBS link to review submission requirements, evaluation criteria, and any additional technical specifications not outlined in the summary.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Precision Machining and Fabrication of Shroud AssemblyThe contract requires the precise manufacturing and fabrication of a shroud assembly according to engineering drawing 008299365, encompassing all stages from material selection and forming to machining and final dimensional verification. The work demands high accuracy and adherence to specified technical standards, with quality control integrated throughout each phase to ensure compliance with the engineered requirements. All components must be produced using approved methods and materials to meet performance and durability expectations for the intended application. This is a total small business set-aside subcontract under NAICS code 332322, reserved exclusively for small businesses as defined by the SBA. It is issued by the Department of Defense, specifically through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 24, 2026. The solicitation was posted on July 23, 2026, and the place of performance is not specified, indicating flexibility in location as long as deliverables meet contractual obligations. Bidders must be certified small businesses eligible under the FAR 19.5 regulations, and all submissions must align with the technical specifications outlined in the referenced engineering drawing.

Sheet Metal Work Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

DUCT ASSEMBLY, AIR CONDITIONING-HEATING, AThe contract is for the procurement of 40 units of DUCT ASSEMBLY, AIR CONDITIONING-HEATING, A (NSN 1660-00-221-1176) under an Indefinite Quantity Contract (IDIQ) awarded through a sealed bid process, with a maximum potential value of $4,999,999.99 and a minimum guaranteed delivery of 10 units per order. Delivery is required within 350 days after the issue of a delivery order, and the contract is governed by a firm-fixed-price structure. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, with specific mandates including DLA Packaging Requirements (RP001), Inspection and Acceptance at Origin (RQ009), Removal of Government Identification from Non-Accepted Supplies (RQ011), and Export Control of Technical Data (RQ032). The technical data involved is subject to ITAR or EAR regulations, restricting access to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and compliance questionnaires, with DFARS 252.225-7048 fully applicable. Packaging and labeling must conform to MIL-STD-129 and ASTM D3951, with barcoding per QUP:001 standards. Quality assurance must comply with ISO 9001:2015, and inspections are conducted at origin with the government retaining final acceptance authority. The contract requires adherence to FAR and DFARS clauses including 52.246-2, 52.246-11, and 52.209-6, with deviations noted for certain subcontracting provisions. Cybersecurity obligations under DFARS 252.204-7012 and 7020 mandate NIST SP 800-171 compliance, cyber incident reporting within 72 hours, and submission of assessment results through SPRS. Invoicing is exclusively through WAWF, governed by FAR 252.232-7006, and payment is processed via DoDAAC. Evaluation for award is based on best value trade-off, with past performance—particularly SPRS assessments and historical quality and delivery data—considered significantly more important than other non-price factors, which are approximately equal in

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

PANEL, STRUCTURAL, AIThe contract solicitation SPE4A7-26-R-0697 is for the procurement of 40 units of a Structural AI Panel with part number 34-1263-522 and NSN 1560-00-874-6326, subject to a total small business set-aside under FAR 19.5. Delivery is required within 208 days after contract award, and the solicitation is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. The item is subject to stringent compliance requirements including Cybersecurity Maturity Model Certification (CMMC) Level 2, as the contractor must be a certified third-party assessment organization. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring DLA-approved contractors to hold JCP certification, complete mandatory training, and obtain prior authorization for access. The supplier must adhere to DLA packaging standards, perform inspection and acceptance at origin, and manage configuration changes through formal engineering change proposals for any deviations or waivers. Components within the panel must be sourced from Qualified Products Lists or Qualified Manufacturers Lists as specified in procurement note H02. Physical identification of the item must be marked per RQ017, though unique item identification is waived per customer request under DFARS 252.211-7003. Removal of government identification from non-accepted supplies is required, and source approval documentation must be submitted with full supporting information. The solicitation closes on August 24, 2026, with responses due by that date, and all contractors must comply with DFARS 252.225-7048 regarding export-controlled technical data handling, ensuring no unauthorized disclosure occurs to foreign entities or subsidiaries.

Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

CYLINDER AND PISTON ASSEMBLY, LANDING GEAThe contract is for the procurement of 40 units of a cylinder and piston assembly, identified by NSN 1620-01-623-9220, under solicitation SPE4A7-26-R-0681, with a delivery requirement of 138 days after award. The technical and quality specifications for this item are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. The item is subject to export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—including foreign nationals employed by U.S. companies or subsidiaries—is restricted without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire and obtained formal approval. Packaging must adhere to DLA standards, inspection and acceptance occur at origin, and government identifiers must be removed from non-accepted items. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026, and is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

SHROUD ASSEMBLY, GENERATORThe contract is for the procurement of 40 units of a Shroud Assembly, Generator with the NSN 1560-00-829-9365, under solicitation SPE4A7-26-R-0701. The delivery schedule requires fulfillment within 232 days after award, and the solicitation is designated as a Total Small Business Set-Aside, indicating exclusive eligibility for small business concerns. Engineering requirements specify weld class 'B' per BAC 5975 with an acceptable weld size of 3/16 inch, as detailed in drawing 008299365. Compliance is mandated with all technical and quality requirements listed in the DLA Master List under R and I identifiers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and inspection and acceptance are to occur at the supplier’s origin. Government identification must be removed from any non-accepted items. Although Item Unique Identification is not required, DFARS 252.211-7003(c)(1)(i) governs its omission. Technical data associated with this item is subject to export control under ITAR or EAR, restricting all disclosures to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to controlled data is limited to contractors approved by DLA, holding a valid US/Canada Joint Certification Program certification, and having successfully completed mandatory export control training and questionnaire. The contracting activity falls under the Department of Defense, specifically the ASC Supplier Operations AE and AF Division.

Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Inspection and Acceptance ServicesThe contract requires the performance of inspection and acceptance services for delivered supplies at their destination, fully aligned with the Federal Acquisition Regulation clause FAR 52.246-2, which mandates rigorous evaluation to confirm that all items meet the specified quality standards and contractual requirements. The work involves verifying compliance at the point of delivery, ensuring that supplies are free from defects, properly documented, and functionally suitable for intended use, with no tolerance for nonconformance. This is a subcontract under NAICS code 541340, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a short solicitation window closing just two days after posting on July 24, 2026. The place of performance is not specified, indicating the work may occur at multiple locations dictated by delivery points, and the contract is solicited via the DIBBS platform, requiring prompt submission prior to the deadline. All services must be executed with precision to meet Department of Defense standards without deviation.

Drafting Services

POSTED

DEADLINE

in about 18 hours

Packaging and Marking Services for Military ShipmentThe contract requires the provision of packaging and marking services for military shipments that strictly comply with MIL-STD-129 standards, ensuring all items are properly labeled with human-readable information and embedded Data Matrix barcodes to support accurate tracking and inventory management across military logistics networks. This subcontract is specifically designed to meet the Department of Defense’s requirements for uniformity, durability, and machine readability in packaging, enabling seamless handling, storage, and redistribution of materiel under operational conditions. The solicitation is open as a subcontract under NAICS code 323110, with a tight response window closing just two days after posting on July 24, 2026. The contracting office, under the ASC SUPPLIER OPER AE AND AF DIV, is actively seeking qualified vendors to fulfill this urgent logistical need, though no specific place of performance or set-aside details are provided. Participation is governed by the federal procurement platform DIBBS, and successful bidders must ensure full adherence to military packaging specifications to maintain supply chain integrity and compliance with DoD logistics protocols.

Commercial Lithographic Printing

POSTED

DEADLINE

in about 18 hours

Supply Chain Traceability DocumentationThe contract requires full supply chain traceability documentation in accordance with clause C03 to ensure strict compliance with defense sourcing standards and counterfeit part prevention protocols. All documentation must accurately and comprehensively track the origin, handling, and movement of components throughout the supply chain, with verifiable records that meet Department of Defense integrity requirements for critical defense systems. Failure to provide complete and accurate traceability will result in noncompliance and potential contract termination. Submitted by subcontractors, this solicitation is classified under NAICS code 541611 and is actively open for response until July 24, 2026, with a posting date of July 22, 2026. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and all deliverables must align with federal defense procurement standards. The place of performance and point of contact details are not specified, but all submissions must be made through the designated DIBBS portal linked in the contract data.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 18 hours