Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Packaging, Preservation, and Shipping of Defense Spares

Active

Federal

Response Deadline08/10/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of packaging, preservation, and shipping services for defense lever components in strict compliance with MIL-STD-2073 standards to ensure the integrity of the components during long-term storage and transit. All packaging methodologies must meet military specifications for environmental protection, corrosion prevention, and physical handling, with preservation techniques tailored to the material composition and operational requirements of the lever parts. The work must maintain full logistical traceability and alignment with Department of Defense supply chain protocols to guarantee readiness and deployment capability. This subcontract is issued under the NAICS code 493190 and is managed by the Air Force Sustainment Center under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 10, 2026, at 8:00 PM. The work is to be performed without specified geographic constraints, and while no set-aside type is indicated, the performance location remains undefined within the terms provided. Prospective participants must demonstrate the capability to deliver fully compliant packaging solutions that meet stringent military preservation benchmarks for extended storage periods.

General Info

Provide MIL-STD-2073-compliant packaging and shipping for defense lever components per DoD supply chain protocols.

Agency

Department Of Defense → FA8121 Afsc PzaaaView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 08:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8121 Afsc Pzaaa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8121 Afsc Pzaaa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-2073-compliant packaging, preservation, and shipping of lever components to ensure long-term storage integrity and logistics compliance.

Similar Contracts

Same NAICS industry code

Packaging, Preservation & Marking ServicesThe contract mandates the packaging, preservation, and marking of machine screws in strict compliance with military standards, specifically employing Dry Method 33 and MIL-STD-2073-1E to ensure environmental protection and long-term preservation during storage and transit. All items must be palletized according to RP001 specifications and shipped using traceable methods to maintain supply chain integrity and accountability. The work is classified as a subcontract under NAICS code 493190, administered by the ASC Commodities Division within the Department of Defense, with all activities subject to rigorous military logistics protocols. Responses are due by July 31, 2026, and the performance location is not specified, but adherence to federal defense packaging and shipping regulations is non-negotiable.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Packaging, Palletization, and Marking ServicesThe contract requires comprehensive packaging, labeling, palletization, and shipment documentation services for cable assemblies, strictly adhering to MIL-STD-129 and DLA RP001 standards to ensure military-grade compliance. All work must meet exacting specifications for marking, identification, and handling to support secure and traceable logistics across defense supply chains, with particular emphasis on accurate labeling and proper pallet configuration to facilitate efficient receipt and inventory management by military distribution centers. This is a total small business set-aside under the SBA program, exclusively open to small business concerns as defined by the Small Business Administration, and is classified under NAICS code 493190, which pertains to other warehousing and storage. The solicitation was posted on July 25, 2026, with responses due by August 8, 2026, and is managed by the ASC Commodities Division of the Department of Defense. Performance is expected to be carried out in alignment with federal contracting guidelines, though the specific place of performance has not been designated. Interested parties must submit proposals via the designated DIBBS portal to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Packaging, Marking & Barcoding ServicesThe contract requires the provision of packaging and marking services fully compliant with MIL-STD-2073-1E for defense logistics, ensuring all items are enclosed and protected according to strict military standards for storage, handling, and transportation. Alongside packaging, the delivery must include MIL-STD-129 marking with 2D Data Matrix barcodes to enable precise, automated tracking of military assets throughout the DoD supply chain, ensuring readiness and accountability at every stage. All work must meet exacting specifications to support end-to-end logistics integrity without variation. This is a subcontract opportunity under the Department of Defense’s ASC Commodities Division, with a response deadline of July 31, 2026, and a NAICS code of 493190 indicating it falls under Other Transportation Support Activities. The performance location and specific point of contact are not detailed, but the work is tied directly to DoD logistics operations. Interested parties must submit proposals through the DIBBS portal by the deadline, and compliance with all technical and documentation requirements is mandatory for qualification.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Packaging, Labeling, and Logistics Support for DoD ShipmentsThe contract requires comprehensive packaging, labeling, and logistics support for Department of Defense shipments, with strict adherence to MIL-STD-129 standards for packaging and barcoding. All materials must be properly labeled for hazardous materials in compliance with federal regulations, and shipping coordination must include the preparation and submission of WAWF documentation to ensure accurate electronic tracking and acceptance. Ocean transport compliance is a potential requirement, necessitating familiarity with international shipping protocols and documentation for maritime movement. The work falls under NAICS code 493190, indicating it is categorized as other transportation support activities, and is structured as a subcontract within the Maritime Supply Chain division of the DoD. The solicitation is open for response until July 29, 2026, with a deadline for submissions at 5:00 PM Eastern Time.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Packaging and Labeling Services for DOD ShipmentsThe contract requires specialized packaging and labeling services for Auto Inflator Kits in full compliance with Department of Defense standards, ensuring readiness for direct shipment to DLA distribution centers. All work must adhere strictly to military specifications for safety, durability, and traceability, including proper documentation, marking, and containerization to facilitate efficient handling and inventory management within the defense logistics network. The packaging must be engineered to withstand environmental stresses and operational conditions typical of military supply chains. This is a subcontract opportunity posted by DLA Dist San Joaquin under the Department of Defense, with a NAICS code of 493190 for other transportation support activities. Interested parties must submit responses by the deadline of July 31, 2026, and performance is expected to occur at locations determined by the contracting entity. While no specific place of performance or point of contact is listed, all work must align with DLA’s requirements for receiving and distributing defense-critical components, with non-compliance potentially leading to rejection of deliverables or contract termination.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires full compliance with military packaging, preservation, labeling, and palletization standards for stator units, specifically adhering to MIL-STD-129 and RP001 requirements. All work must meet Department of Defense specifications to ensure durability, traceability, and readiness for military logistics and deployment. The services cover every stage of preparation from initial packaging through final palletization, with strict emphasis on correct labeling and preservation techniques to safeguard components during transport and storage. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by FAR 19.5, and is classified under NAICS code 493190 for other transportation support activities. The opportunity is open for response until August 1, 2026, and is issued as a subcontract under the Department of Defense, managed by the Construction & Equipment Manufacture and Construction agency. All performance is expected in alignment with DLA directives, and interested parties must access the solicitation through the provided DIBBS portal to submit proposals.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Military Packaging, Labeling, and Palletization ServicesThe contract requires comprehensive packaging, labeling, barcoding, and palletization services for military shipments of steering knuckles, fully compliant with MIL-STD-129 for documentation and identification standards and RP001 for secure, standardized palletization. All packaging must meet stringent military logistics requirements, including proper handling of hazardous materials if applicable, ensuring safe, traceable, and efficient transport through the defense supply chain. The services must be executed with precision to support readiness and sustainment operations without delay. This is a subcontract awarded under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 493190 indicating warehousing and storage support services. The solicitation was posted by the Department of Defense’s Land Supply Chain and is open for responses until July 29, 2026, with performance expected to occur at an unspecified location within the United States. All bidders must be certified small businesses, and compliance with federal acquisition regulations governing set-asides is mandatory to qualify for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Packaging and Marking ServicesThe contract specifies the proper packaging, palletization, and marking of shipments containing sealing compound in full compliance with military logistics standards. All activities must adhere to stringent defense department requirements to ensure safe handling, transportation, and inventory management across military supply chains. The work is classified as a subcontract under the NAICS code 493190, indicating it pertains to other transportation and support activities related to freight. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet operational readiness criteria without geographic restriction specified. The solicitation was posted on July 24, 2026, and the award details are accessible through the DIBBS system using the contract number SPE8ES26P1049.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Preservation, and Marking of Sensitive InstrumentsThis contract requires strict adherence to MIL-STD-2073-1E for the packaging and preservation of pressure indicators, ensuring sensitive instrumentation is protected against environmental damage during storage and transit. Compliance with MIL-STD-129 is mandatory for uniform marking and labeling, including the use of Marking Code 05 to indicate delicate instrument handling, which mandates specialized packaging techniques and clear identification of handling requirements. All work must meet military-standard protocols for durability, tamper resistance, and traceability throughout the supply chain. The procurement is structured as a total small business set-aside under the SBA program, limiting eligibility to qualified small businesses as defined by FAR 19.5. The NAICS code 493190 classifies this as other warehousing and storage, indicating the focus is on specialized logistics and preservation services rather than manufacturing. The contract is managed by the ASC Commodities Division under the Department of Defense and is open for responses until August 7, 2026, with performance expected to occur within U.S. defense logistics channels under stringent compliance oversight.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services specifically for piston units, adhering strictly to MIL-STD-2073-1E and DLA RP001 standards. All packaging must ensure the integrity and protection of the components during storage and transport, with detailed labeling that meets federal military requirements, including proper hazardous material identification and handling instructions. The work also includes palletization to facilitate efficient logistics and handling, ensuring that all units are securely stacked and marked for standardized military supply chain operations. This is a subcontract under the Department of Defense’s Land Supply Chain, with the NAICS code 493190 indicating warehousing and storage services. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026, and performance is expected to support defense logistics across unspecified locations. All work must comply with federal regulations for defense materiel handling, and contractors are expected to demonstrate proven capability in military packaging standards, particularly in preservation techniques and hazardous material compliance. The contract is accessible through the DIBBS platform for qualified subcontractors seeking to fulfill these specialized defense logistics needs.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging and Labeling ServicesThe contract requires the provision of military-standard packaging, marking, and labeling services for clutch disks in full compliance with MIL-STD-129 specifications. This includes accurate application of National Stock Numbers, CAGE codes, and any required hazardous material labeling where applicable, ensuring all items meet Department of Defense standards for identification, handling, and logistics traceability. The work must be performed to exacting military guidelines to support supply chain integrity and operational readiness. This is a subcontract opportunity issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a solicitation posted on July 24, 2026, and a response deadline of August 25, 2026. The North American Industry Classification System code 493190 applies, indicating the nature of the work involves other support activities for transportation. Performance of the contract is expected to align with DoD logistics requirements, though specific performance locations are not detailed. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

in about 1 month

Military-Compliant Packaging and MarkingThe contract requires complete packaging, labeling, and barcoding of delivered screws in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military grade requirements for durability, identification, and traceability. This includes the application of 2D Data Matrix barcodes and accurate NSN marking on each unit, enabling seamless logistics and inventory tracking across defense supply chains. The work must be executed with precision to meet federal specifications for military hardware handling and documentation. This is a subcontract opportunity posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of July 31, 2026. The NAICS code 493190 indicates the scope falls under Other Support Activities for Transportation, emphasizing the logistical and packaging nature of the services. The place of performance and point of contact details are not specified, but interested parties must adhere to all technical and procedural requirements outlined in the referenced military standards to qualify for award. The solicitation is accessible through the DIBBS system at the provided URL.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8121 Afsc Pzaaa

Same awarding agency

Environmental Monitoring and Erosion ControlThe contract titled Environmental Monitoring and Erosion Control is a subcontract under a Partial Small Business Set-Aside, designated for small businesses as defined under FAR 19.5, and falls under the NAICS code 561730 for waste collection and treatment services. It encompasses the installation and ongoing maintenance of erosion control measures such as silt fencing, hydroseeding, and stormwater monitoring systems to ensure environmental compliance and site stabilization. The work is solicited by the Department of Defense through its FA8121 Afsc Pzaaa office, though specific location details for performance are not provided. The opportunity was posted on July 24, 2026, and interested parties can access additional information via the provided SAM.gov link. The scope of work requires adherence to environmental standards and ongoing monitoring to prevent sediment runoff and protect surrounding ecosystems during construction or land disturbance activities.

Landscaping Services

POSTED

DEADLINE

Traffic Control and Flagging ServicesThe contract involves the implementation and management of temporary traffic control zones compliant with Caltrans and MUTCD standards, ensuring safe and efficient movement of vehicles and workers during roadway operations. Services include the deployment and maintenance of traffic control devices, flagging operations, and adherence to all applicable safety protocols, performed in alignment with federal and state transportation guidelines. The work is subcontracted under a partial small business set-aside, designated for small business participation as defined by FAR 19.5, with the NAICS code 561990 indicating non-specialized waste management and other services. The contracting agency is the Department of Defense under the FA8121 Afsc Pzaaa office, with performance location unspecified but presumed to support defense-related infrastructure projects. The solicitation was posted on July 24, 2026, and interested parties can access further details through the provided SAM.gov link.

All Other Support Services

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract involves the fabrication and installation of steel support structures designed for overhead signage and lighting gantries under a partial small business set-aside classification. It is classified under NAICS code 332312, which corresponds to structural metal fabrication, and is issued as a subcontract within the Department of Defense framework under the FA8121 Afsc Pzaaa agency. The opportunity was posted on July 24, 2026, and emphasizes compliance with small business participation requirements, ensuring a portion of the work is performed by certified small businesses. The place of performance is not specifically detailed, indicating that work may occur at multiple locations tied to federal infrastructure projects. All fabrication and erection activities must meet stringent structural and safety standards appropriate for overhead applications, with expectations for precision engineering, quality control, and timely delivery to support critical transportation or facility lighting and signage systems.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Paving and Asphalt ResurfacingThe contract involves the removal of existing pavement and the resurfacing of the area with hot mix asphalt, adhering to specified thickness and smoothness standards to ensure long-term durability and safety. This work is classified as a subcontract under the North American Industry Classification System code 237310 and is designated as a Partial Small Business Set-Aside, meaning a portion of the work is reserved for small business concerns as defined by FAR 19.5. The solicitation is managed by the Department of Defense under the agency name FA8121 Afsc Pzaaa, with the posting date set for July 24, 2026, indicating it is a future opportunity. The place of performance and specific location details have not been provided, and no point of contact information is listed. Interested parties can access further details through the provided SAM.gov link to the opportunity page.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Electrical Installation for Highway Lighting SystemThe contract is for the installation of electrical systems along highway segments, specifically encompassing conduit, wiring, and lighting fixtures to support a highway lighting system. It is classified as a subcontract under a Partial Small Business Set-Aside, aimed at providing opportunities for small businesses as defined by FAR 19.5, with the NAICS code 238210 specifying electrical power and communication line installation. The work is being procured by the Department of Defense under the office FA8121 Afsc Pzaaa, though specific performance locations, agency addresses, and points of contact are not provided in the data. The solicitation was posted on July 24, 2026, and details can be accessed through the provided SAM.gov link, where further technical specifications and requirements will be available to interested parties.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Technical Data and Engineering Drawings DevelopmentThe contract seeks the development or sourcing of engineering drawings and technical data for a lever component, with the possibility of reverse engineering being required due to the absence of an established Engineering Data List. This effort is critical to recreating or documenting the necessary specifications to support production or maintenance, as no prior technical documentation is provided. The work scope emphasizes precision and compliance with engineering standards to ensure functional equivalence and interoperability of the component. This subcontract is issued under the NAICS code 541715 for research and development in physical, engineering, and life sciences and is administered by the Department of Defense through the FA8121 Afsc Pzaaa office. The solicitation was posted on July 24, 2026, with a firm deadline for responses set for August 10, 2026, at 8:00 PM. While specific performance location and point of contact details are not provided, the work is expected to align with federal defense requirements and deliverables must meet the technical rigor expected by the U.S. Air Force and broader DoD procurement frameworks.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Quality Control, Inspection, and Testing ServicesThe contract requires the provision of comprehensive quality control services for lever components, including in-process and final inspections, testing, and quality assurance activities to ensure full compliance with military standards and government acceptance criteria. All work must be executed with precision to meet the stringent performance and safety requirements mandated by the Department of Defense, with deliverables validated through rigorous verification processes. This subcontract is issued under NAICS code 541330 for architectural, engineering, and related services, and is managed by the Air Force Space Command through the FA8121 PZA AA office. The solicitation was posted on July 24, 2026, with a response deadline of August 10, 2026, at 8:00 PM. The place of performance and other location details are unspecified, indicating the work may be conducted at various authorized facilities. Bid responses must be submitted before the deadline to be considered for award.

Engineering Services

POSTED

DEADLINE

Precision Manufacturing of Aerospace Lever ComponentThe contract requires the manufacture of 19 units of a military-specification lever component identified by NSN 3040-01-267-7734NZ and part number 4067415, encompassing the full production lifecycle from material procurement and precision machining to final assembly, rigorous quality control, secure packaging, and timely delivery to Tinker Air Force Base. All work must adhere to defense standards and be completed in compliance with federal procurement requirements, with full accountability for sourcing approved materials and ensuring dimensional and functional conformity under military specifications. The solicitation is classified as a subcontract under NAICS code 332999, with a response deadline of August 10, 2026, and was posted on July 24, 2026, under the Department of Defense through the FA8121 Afsc Pzaaa office. The place of performance is designated as Tinker AFB, and while no set-aside designation is specified, the contractor must be prepared to meet stringent defense procurement protocols including documentation, traceability, and inspections without deviation. Delivery schedules must align with operational readiness timelines, and any failure to meet technical or logistical requirements could result in contract non-compliance.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

TF33 Repair 1st-4th Stage Turbine Nozzle VanesThe contract seeks repair services for the 1st through 4th stage turbine nozzle vanes on TF33 engines, targeting specialized maintenance to restore operational readiness and performance. This presolicitation is designated as a Partial Small Business Set-Aside under FAR 19.5, reserving a portion of the award for small business concerns, and falls under NAICS code 336412 which covers aircraft engine and engine parts manufacturing. The solicitation is managed by the Department of Defense through the FA8121 AFSC PZAAA office located at Tinker Air Force Base in Oklahoma City, Oklahoma. While the detailed place of performance is unspecified, the work is expected to be conducted in support of military aviation infrastructure under the oversight of the Air Force Sustainment Center. Brody Corbett serves as the primary point of contact for inquiries, with direct access provided via phone and email for potential bidders seeking clarification or additional information prior to submission.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Spares Procurement of Lever, Remote Control. NSN: 3040-01-267-7734NZThe contract solicitation seeks spares procurement for a lever and remote control with NSN 3040-01-267-7734NZ, issued under solicitation number FD20302602308 by the Department of Defense through the Air Force Sustainment Center office located at Tinker AFB, Oklahoma. The posting date is July 24, 2026, with a response deadline of August 10, 2026, at 8:00 PM Eastern Time, and it is classified as a sources-sought notice indicating the government is gathering market information to determine potential supplier capabilities rather than issuing a formal procurement. The North American Industry Classification System code is 336412, which corresponds to aerospace product and parts manufacturing, suggesting the requirement is for specialized defense-related components. The primary point of contact is John Freeman, reachable via email at John.Freeman.16@us.af.mil, and the place of performance is not explicitly defined beyond the issuing agency's location. No set-aside provisions are specified, meaning the opportunity is open to all eligible contractors regardless of size or certification status.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

RAPTOR FMS Test CellThe U.S. Air Force, through AFLCMC/LPSID at Tinker Air Force Base, is conducting market research to identify qualified vendors for a potential ten-year contract to support propulsion test cell requirements for F100, F110, J85, and T56 engines. The opportunity is targeted at companies with NAICS codes 336412 and 336413, capable of delivering engine test cell systems including control cabs, data acquisition systems, thrust stands, fuel and oil preservation systems, mechanical and calibration kits, and all associated support equipment. Vendors must be approved by the U.S. Air Force for engine test cell production and maintain Top Secret clearance eligibility. The contract, if issued, will be structured as a base five-year term with two optional extensions totaling ten years and will require full lifecycle support: installation, maintenance, modification, design consultation, site surveys, and environmental protection systems. Additionally, vendors must provide twelve-month engine storage and preservation, repair and modification services, demonstration and familiarization training, test cell enclosures, and a robust maintenance service agreement offering remote and portal-based technical support. Responses must include company identification details such as name, CAGE code, DUNS number, and active SAM registration, along with comprehensive documentation of capabilities for each specified equipment and service item. A key contractual condition is that repeated operational and administrative occurrences—specifically four instances within a year—will trigger a negotiated contract line item. All submissions, which are strictly voluntary and will not be compensated, must be sent to Sarah Thigpen at sarah.thigpen@us.af.mil no later than 12:00 p.m. CST on August 24, 2026. Participation in this sources sought does not guarantee a solicitation will be issued, nor does failure to respond preclude future bid eligibility. The proposed place of performance is in Houston, Texas, and no small business set-aside is planned. This notice serves only as a market research tool to inform potential procurement and is not a solicitation.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

SPEED MAC - STRATEGIC PROCUREMENT FOR ENGINE EXCELLENCE AND DELIVERY SPEED MULTIPLE AWARD IDIQ. The U.S. Air Force is soliciting proposals under RFP FA812126RB002 for a Strategic Procurement initiative focused on Engine Excellence and Delivery Speed, aiming to establish Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) contracts to support the repair, overhaul, remanufacture, and new manufacture of parts for the F100-PW-220/229 Pratt and Whitney engine. This effort serves both the U.S. Air Force and Foreign Military Sales, with contracted capabilities supplementing the Oklahoma City Air Logistics Complex’s operations at Tinker Air Force Base. Proposals must be submitted via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module by 17 August 2026 at 12:00 PM Central Time, with no extensions granted despite prior erroneous dates. A virtual proposal conference is scheduled for 23 July 2026, providing participants an opportunity to engage with the contracting team. The contracts will be awarded under the Revolutionary FAR Overhaul (RFO) Part 15, accommodating both Firm-Fixed-Price and Cost-Reimbursable line items, with no restrictions on foreign participation. The ordering period spans ten years, consisting of a base five-year period and one five-year option, with individual task and delivery orders issued under RFO 16.506 and 16.507. Funding will be obligated per order, and all awardees must meet a minimum order guarantee established after the award conference. While initially scoped for the F100 engine, the contract structure allows for future expansion to other platforms such as the TF33. Commercial and non-commercial, supply and service, and sole source or competitive terms will apply as appropriate, and all documentation must be accessed through the PIEE platform.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE