Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

PAPER, MEDICAL RECORDING INSTRUMENTS

Awarded

SPE2DS-26-T-298UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.

General Info

Procurement of medical recording paper for Propaq MD and X systems, 6 sheets per box, labeled per MIL-STD-129, delivered in 20 days to Tinker AFB.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$81.5

NAICS

424130 - Industrial and Personal Service Paper Merchant Wholesalers

Place of Performance

OK, USA

Set-Aside

NONE

Awardee

CENMED ENTERPRISES INC

Award Issued Date

08/10/2026, 12:00:00 AM UTC

Documents

2

rfq

High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update

PhaseAwarded

PostedAug 2

Solicitation

Notice updatedAug 2

The notice description changed.

AwardedAug 10

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Marc Canalichio

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE2DS26V8682 posted on DIBBS. Awardee: CENMED ENTERPRISES INC (CAGE 1WAS9) Total Contract Price: $81.50 Award Date: 08-10-2026 Solicitation: SPE2DS-26-T-298U Line items: - PAPER, MEDICAL RECORDING INSTRUMENTS (NSN/Part 6515016286597, PR 7017693357) - PAPER, MEDICAL RECORDING INSTRUMENTS (NSN/Part 6515016286597, PR 7017693356)

Similar Contracts

Same NAICS industry code

Cleaning and Janitorial Supplies

Solicitation # BID 2027-15

The Town of Stratford, Connecticut, is soliciting competitive bids under RFP #2027-15 for the provision of cleaning and janitorial supplies to support various municipal facilities, including Town Hall, the Police and Fire Departments, Public Works, the Baldwin Center, the Birdseye Complex, and Water Pollution. The awarded contractor will be responsible for delivering a wide range of consumables, such as toilet tissue, can liners, and cleaning chemicals, while actively monitoring product usage to prevent inventory shortages. The contract is intended for an initial twelve-month term, with the possibility of one-year extensions at the Town's discretion upon sixty days' written notice. Proposals must be submitted in a sealed envelope clearly marked with the RFP number to the Office of the Purchasing Agent by 10:00 AM on November 16, 2026; electronic submissions are not permitted. Bidders are required to provide a comprehensive statement of qualifications, including organizational details, personnel resumes, proof of industry experience, and references from similar municipal projects within the last three years. Evaluation will be based on price, product quality, and organizational capability. Additionally, the successful vendor must maintain professional liability and comprehensive general liability insurance and certify compliance with OSHA and Federal/State labor regulations.

DAS Procurement

POSTED

DEADLINE

DC-3 Training Materials SupplyThe DC-3 Training Materials Supply subcontract, issued under the Department of Transportation via 6973GH Franchise Acquisition Svcs, focuses on the provision of essential technical documentation and manuals for prime contractors working on FAA Flight Standards Operations projects. The scope of work requires the delivery of current and accurate Pilot Operating Handbooks, training manuals, and comprehensive course materials in either physical or digital formats. This opportunity is categorized under NAICS code 424130 and was posted on October 29, 2026. Interested parties must submit their responses by the deadline of November 13, 2027.

6973GH Franchise Acquisition Svcs

POSTED

DEADLINE

in about 1 year

Sanitation Chemical and Consumable SupplyThis subcontract for Sanitation Chemical and Consumable Supply involves providing bulk chemical deodorizers, disinfectants, and toilet paper to prime contractors operating at the Marine Corps Air Ground Combat Center in Twentynine Palms, California. The scope of work requires the delivery of approved sanitation chemicals and consumables, with a strict mandate that all materials comply with the Emergency Planning and Community Right-to-Know Act and California State Regulations. Additionally, the provider must supply comprehensive Safety Data Sheets for all materials delivered to the site. Managed under the Department of Defense for the Commanding General, this opportunity falls under NAICS code 424130. The solicitation was posted on October 29, 2026, with a response deadline set for November 6, 2026.

Commanding General

POSTED

DEADLINE

General Office SuppliesThis subcontract opportunity is issued by the Federal Motor Carrier Safety Administration under the Department of Transportation for the procurement of general office supplies. The contract focuses on the bulk supply and delivery of standard commercial quality paper, ink, and administrative stationery necessary for the administration of Commercial Vehicle Safety Plan grants for recipient entities. The solicitation is categorized under NAICS code 424130 and was posted on October 29, 2026. Interested parties must submit their responses by the deadline of December 28, 2026. The primary objective of the agreement is to ensure the consistent delivery of completed office supply orders to support agency operations.

Federal Motor Carrier Safety Administration

POSTED

DEADLINE

in about 2 months

Fitness wipe refills for nine (9) recreation centers

Solicitation # QQ-130782

Solicitation QQ-130782, issued by the County of Fairfax, seeks a provider for fitness wipe refills to support nine recreation centers managed by the Fairfax County Park Authority. The period of performance is scheduled from November 2026 to November 2027. The required wipes must be unscented, 8 by 10 inches in size, and maintain a neutral pH level between 5.5 and 7. Additionally, the refills must be compatible with stainless steel floor stand wipe dispensers measuring 36 inches in length, 13 inches in width, and 36 inches in height. Delivery is required across multiple locations, including the Audrey Moore, Cub Run, Franconia, George Washington, Providence, Spring Hill, Oakmont, and Mount Vernon recreation centers, with estimated quantities ranging from 2,800 to 15,000 wipes per site. The contract will be awarded to the lowest responsive responsible bidder based on the best price and adherence to technical specifications. Bidders must provide detailed descriptive literature and catalog cuts to verify product compliance. Administrative requirements include maintaining specific insurance coverages, including 1 million dollars for Commercial General Liability and Automobile Liability, and 100,000 dollars for Employer's Liability. All shipments must include a packing list and reference the County issued Purchase Order number. Payment is generally due 30 days after the receipt of a properly completed invoice and acceptance of materials. The County also maintains the right to audit the contractor for three years following final payment.

County of Fairfax

POSTED

DEADLINE

VACUUM CLEANER, FLOOR MACHINES, PARTS, & REPAIR

Solicitation # 232736

The City of Los Angeles General Services agency is seeking bids for solicitation number 232736 regarding the procurement of vacuum cleaners, floor machines, related parts, and repair services. This opportunity is categorized under NAICS code 424130 and will be performed within Los Angeles, California. Interested vendors must submit their responses by the deadline of November 10, 2026, at 7:00 PM. Detailed information and the bidding process are available through the City of LA Vendor Self Service Website, and inquiries can be directed to the point of contact, Nicholas Ooi.

General Services

POSTED

DEADLINE

Ancillary Vending Supplies ProviderThe Ancillary Vending Supplies Provider subcontract involves the procurement and delivery of non-machine hardware and consumables for prime contractors working on Nevada Department of Corrections projects. The scope of work specifically includes the provision of commercial food-service grade microwave ovens along with recurring shipments of disposable items such as napkins, condiments, and plastic utensils. The selected provider is responsible for delivering these supplies directly to designated facility areas, with the primary place of performance located at the Department of Corrections Administration Office in Carson City, Nevada. This opportunity falls under NAICS code 424130 and is managed by the State of Nevada Department of Corrections.

440 - Department of Corrections

POSTED

DEADLINE

in about 2 months

Collegiate Merchandise and Apparel SupplyThis subcontract for Collegiate Merchandise and Apparel Supply involves the sourcing and delivery of branded merchandise, apparel, and general bookstore retail goods for prime contractors working on Collin County Community College District bookstore projects. The scope of work includes providing college-themed clothing, stationery, and other retail items that adhere to specific branding guidelines and quality standards, with final delivery to designated campus locations. Managed by the Procurement agency in Texas under NAICS code 424130, the opportunity was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

POSTED

DEADLINE

Janitorial Paper Supplies

Solicitation # 765-370

Prairie Valley School Division No. 208 is soliciting submissions from qualified suppliers to establish a Standing Offer for the provision of janitorial paper supplies and related services. This arrangement aims to create a list of pre-approved products with firm pricing to be utilized on an as-needed basis. The contract will be performed within Saskatchewan, Canada. The agreement features an initial minimum term of one year, with the possibility of extending for up to three additional years based on operational needs and supplier performance. Interested parties must submit their responses by the deadline of November 12, 2026. Primary inquiries regarding this solicitation can be directed to Stephen Bellacera.

Prairie Valley School Division No. 208

POSTED

DEADLINE

Food-Service Disposables SupplierThis subcontract opportunity is for a Food-Service Disposables Supplier to provide non-food disposable items for prime contractors working on Indian Health Service projects at Lawton Indian Hospital. The scope of work involves the sourcing and delivery of bulk supplies, including napkins, plasticware, disposable trays, and gloves, utilizing standard dry freight transport. A critical requirement of the contract is ensuring that all food-contact surfaces are fully compliant with the FDA Food Code. The project is designated as a Buy Indian Set-Aside under the Department of Health and Human Services and falls under NAICS code 424130. Performance will take place in Lawton, Oklahoma. Interested parties should note the response deadline of November 6, 2026.

Indian Health Service

POSTED

DEADLINE

Paper Products and Janitorial Supplies Get attachments at the SWBNO site. https://www.swbno.org/Bids/

Solicitation # 123460-2026-SWB-11

The Sewerage and Water Board of New Orleans is seeking solicitations for the procurement of paper products and janitorial supplies. This opportunity, identified by solicitation number 123460-2026-SWB-11, is managed by the state of Louisiana and requires performance within the state. Interested parties must submit their responses by the deadline of November 11, 2026, at 7:00 PM. Detailed attachments and further specifications for the contract are available through the official SWBNO website. For inquiries regarding this solicitation, the primary point of contact is Cashanna Moses, who can be reached via email or phone.

Sewerage & Water Board of New Orleans

POSTED

DEADLINE

Cafeteria Consumables and SuppliesThis subcontract for the Carl D. Perkins Job Corps Center involves the procurement and delivery of non-food cafeteria consumables, including paper goods, cleaning supplies, and disposables. The selected provider will be responsible for transporting these items via general freight vehicles in accordance with the Foodservice Bid Sheet. To remain eligible, the contractor must maintain active SAM registration and valid Kentucky state registration. The opportunity is designated as a small business set-aside, welcoming applications from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 20, 2026, under NAICS code 424130.

Carl D Perkins Job Corps

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Battery Testing and Certification ServicesThis subcontract for Battery Testing and Certification Services, issued by the Defense Logistics Agency under the Department of Defense, requires the performance of First Article Testing and Government Production Lot Testing for prime contractors. The selected provider will be responsible for validating assemblies in accordance with QAP 81337 11-1-9487 and preparing DD1222 forms for submission to the U.S. Army Combat Capabilities Development Command. Deliverables include certified test reports and samples, with a strict requirement for ISO 9001 quality management certification. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 2, 2026. This contract ensures that critical battery components meet rigorous military specifications and quality standards before being integrated into the supply chain.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

HAZMAT Packaging and LogisticsThis SBA Total Small Business Set-Aside subcontract involves providing specialized packaging, marking, and transportation services for battery assemblies supporting Defense Logistics Agency supply contracts. The contractor is responsible for ensuring all packaging and marking adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards, while also preparing necessary HAZDEC certifications. Final delivery of the processed assemblies is required at DMO Camp Kinser, Japan. To qualify for this performance, the contractor must maintain IP025 HAZMAT certification and strictly comply with 29 CFR 1910.1200 safety regulations. The project falls under NAICS code 562112 and is managed through the Department of Defense.

Hazardous Waste Collection

POSTED

about 14 hours ago

DEADLINE

Critical Safety Battery Assembly ServicesThis subcontract for Critical Safety Battery Assembly Services involves the physical assembly of battery units for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes the integration of cells, wiring, and housing in strict accordance with Reference Drawing NR 81337 11-1-9467 and QAP 81337 11-1-9487 to deliver completed Battery Assemblies under NSN 6140-01-609-7775. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335910. Due to the nature of the work, the contractor must maintain CMMC Level 2 certification for the handling of Covered Defense Information and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on October 30, 2026, with a response deadline of November 2, 2026.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

Li-Ion Battery Cell SupplyThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the manufacture and supply of high-grade Lithium-Ion battery cells for prime contractors. The cells must be produced in accordance with TDP Rev B Gen 4 specifications and must be free of intentionally added mercury as per NAVSEA 5000-003D. The selected provider is required to deliver comprehensive material certifications and quality documentation to ensure all technical standards are met. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335911. Strict adherence to ITAR and EAR compliance is mandatory, and the supplier must hold HAZDEC certification. Interested parties must submit their responses by November 2, 2026, to provide certified battery cells that meet these rigorous defense requirements.

Storage Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

Military-Grade Oxygen Component PackagingThis subcontract involves the specialized packaging, marking, and sealing of oxygen-cleaned components to support prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires strict adherence to IP042 oxygen clean packaging standards, MIL-STD-2073-1E, and RP001 DLA requirements, specifically utilizing non-outgassing materials to ensure component integrity. Additionally, all items must be marked in accordance with MIL-STD-129. The primary objective is the delivery of packaged valves prepared for international shipment to Maestranza Aerea de Madrid. This effort is managed under the Department of Defense through the Defense Logistics Agency, with a response deadline of November 7, 2026.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 14 hours ago

DEADLINE

Oxygen System Check Valve SupplierThis subcontract through the Defense Logistics Agency involves the supply of two 1/4 inch check valves intended for prime contractors supporting Spanish Air Force supply contracts. The required components must meet NSN 4820-00-232-7570 specifications, specifically referencing manufacturer part number 2192-502-007-1 from Mission Systems Orchard Park Inc. Technical requirements mandate that the valves be constructed from high-pressure oxygen-compatible materials capable of supporting a maximum operating pressure of 500 PSI. The solicitation was posted on October 30, 2026, with a response deadline of November 7, 2026, falling under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

SWITCH, RADIO FREQUENCY

Solicitation # SPE7M5-27-Q-0121

POSTED

about 14 hours ago

DEADLINE

VALVE, CHECK, OXYGEN SYS

Solicitation # SPE7MC-27-Q-0041

Solicitation SPE7MC-27-Q-0041 is a small business set-aside for the procurement of two 1/4 inch check valves for oxygen systems, identified by NSN 4820-00-232-7570. These critical application items must support a maximum operating pressure of 500 PSI and are specified as part number 2192-502-007-1 from Mission Systems Orchard Park Inc. The contract is established as a firm fixed price award with a delivery timeline of 147 days after order. The final destination for these supplies is the Spanish Air Force at Maestranza Aerea de Madrid in Spain, with both inspection and acceptance occurring at the destination. The contractor must adhere to stringent technical and quality standards, including cleaning and drying requirements per MIL-STD-1330D for oxygen cleaned items and compliance with IP042 oxygen clean packaging and marking requirements. Packaging must follow MIL-STD-2073-1E and RP001 DLA packaging requirements, while marking must align with MIL-STD-129. Award decisions will be based on best value, evaluating price, offered delivery, and past performance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic origin, and hazardous material labeling.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0125

Solicitation SPE8E4-27-T-0125 is a total small business set-aside issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 51 feet of metal bar. The material is specified as Steel Comp M2, hot rolled or forged, round and annealed, with a 6.000 inch diameter and lengths between 6 and 12 feet, weighing 105.740 lb/ft. This is a Foreign Military Sale requirement for delivery to the Parts-Attach General Depot in Tainan City, Taiwan, with a required delivery date of October 8, 2026, and a delivery window of 20 days after order. Inspection and acceptance are conducted at the point of origin. The contract mandates strict adherence to technical and quality standards, including ASTM A600-92A and QAP 13873. A Certificate of Quality Compliance is required for every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with specific requirements for continuous identification markings including the contract delivery order number, NSN, and manufacturer details. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Iron and Steel Forging

POSTED

about 14 hours ago

DEADLINE

CLEANING KIT, GUN

Solicitation # SPE7L7-27-T-0313

Solicitation SPE7L7-27-T-0313 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support Land Supplier Operations for the procurement of two gun cleaning kits (NSN 1005-01-728-6872). These items are designated as critical gun parts with unique requirements and must be delivered to NSWC Crane within 20 days after receipt of order. The procurement is subject to strict technical specifications, including basic drawing 30003 3392AS1330 and several reference drawings. Quality assurance is paramount, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with inspections and acceptance conducted at the origin by a DCMA QAR. The contract incorporates rigorous compliance and security standards, including CMMC Level 2 self-assessment or third-party certification and adherence to ITAR or EAR export controls for technical data. Packaging and marking must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for hazardous material labeling per 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Additionally, offerors must comply with the Buy American Act and Berry Amendment, and are prohibited from using additive manufacturing processes unless specifically authorized.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

WAVEGUIDE ASSEMBLY

Solicitation # SPE7M5-27-Q-0107

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS