Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Paving and Asphalt Resurfacing

Active

Federal

Response Deadline08/18/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the removal of existing pavement and the installation of new asphalt layers across highway lanes and shoulders, focusing on comprehensive resurfacing to restore functionality and safety. The work is categorized under NAICS code 237310, indicating a specialized highway and street construction effort, and is structured as a subcontract opportunity issued by the Naval Undersea Warfare Center Division Newport under the Department of Defense. Performance of the work is required in Newport, with a zip code of 02841, and all tasks must align with federal standards for infrastructure rehabilitation. The solicitation was posted on August 6, 2026, with responses due by August 18, 2026, at 3:00 PM, creating a tight turnaround for qualified contractors to submit proposals. The lack of set-aside designation and specific point of contact suggests the opportunity is open to all eligible subcontractors without preference classifications, and further details can be accessed via the provided SAM.gov link.

General Info

Pavement removal and new asphalt installation on highway lanes and shoulders in Newport, 02841, for DoD.

Agency

Department Of Defense → Nuwc Division NewportView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Newport, RI, 02841, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 03:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nuwc Division Newport

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nuwc Division Newport

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Removal of existing pavement and installation of new asphalt layers for highway lanes and shoulders.

Similar Contracts

Same NAICS industry code

Sanibel Bridge Fender System Repairs

Solicitation # B260308JAK

Lee County, Florida, is inviting qualified contractors to submit sealed bids for the repair, rehabilitation, replacement, and restoration of the Sanibel Bridge fender system and associated marine components, including timber and composite fenders, prestressed concrete piles, pile head repairs, catwalks, navigation lighting, clearance gauges, handrails, and related structural elements. The scope of work must be fully understood and addressed according to the official specifications available exclusively on the County’s procurement portal at https://leegov.ionwave.net, and bidders are responsible for verifying all documents, addenda, and updates posted there, as submissions based on incomplete or incorrect information from other sources will not be accepted. All bids must be submitted electronically via Ion Wave or hand-delivered in a sealed envelope clearly labeled with the solicitation number B260308JAK, project title, bidder name, and contact details to the Procurement Management Division at 2115 Second Street, 1st Floor, Fort Myers, FL 33901 no later than September 9, 2026, at 7:30 PM, with electronic submissions strongly recommended to avoid technical failures. Bidders are required to complete and sign the Bid Invitation, accurately fill out all attributes and bid lines, and include all requested attachments, ensuring files are uncorrupted and fully accessible. Submissions that are incomplete, unreadable, or improperly formatted may be disqualified. All bids will be publicly opened at the same office on the deadline date and time, and selection will be based on compliance with the solicitation’s technical requirements and overall responsiveness. Questions about the solicitation must be submitted electronically through the official portal’s questions tab, and bidders are cautioned that the County bears no responsibility for internet outages or system failures, urging early submission to ensure timely receipt. The point of contact for inquiries is Jason Koza at jkoza@leegov.com or 239-533-8898, and the official posting site remains https://leegov.ionwave.net for all solicitation-related information.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

LACSD Surface Water PFAS Removal Project No. 251, CA

Solicitation # lacsd-surface-water-pfas-removal-project-no-251-ca

The contract involves the design and construction of PFAS treatment facilities at the Bernina and Cedar Glen Water Treatment Plants in California, encompassing comprehensive civil, structural, mechanical, electrical, instrumentation, and process system upgrades to address per- and polyfluoroalkyl substances in the water supply. The project aims to enhance the plants' capacity to effectively remove these contaminants in compliance with evolving regulatory standards and public health priorities, requiring integrated engineering solutions across multiple disciplines. All work must be performed in California, with specific attention to local infrastructure constraints and environmental considerations. The solicitation, issued by Pyramid Building & Engineering, Inc. under number lacsd-surface-water-pfas-removal-project-no-251-ca, is open for responses until September 3, 2026, and is designated for Disadvantaged Business Enterprises as defined by the Department of Transportation. It is classified under NAICS code 237310 for water and wastewater treatment construction and seeks qualified contractors with expertise in complex treatment system implementations. Primary communication and inquiries should be directed to John Garrison at estimating@pyramidbuilding.net or 760-949-9005, with all proposals expected to meet the required standards for DBE participation and technical delivery under the terms of the solicitation.

Pyramid Building & Engineering, Inc.

POSTED

about 8 hours ago

DEADLINE

PĪKAKE STREET-NŪHOU STREET ROUNDABOUT

Solicitation # 4112

The County of Kaua‘i is soliciting sealed electronic bids for the construction of the Pīkake Street–Nūhou Street Roundabout under Solicitation Number 4112, with bids due by 3:00 P.M. Hawai‘i Standard Time on September 7, 2026, through the Public Purchase System. All bidders must hold a valid Hawai‘i State Contractor’s License Type “A” or Specialty Licenses C-3 and C-17 prior to submission and be registered as a Public Purchase Vendor for the Hawaii Region and Kaua‘i County Agency. The project, fully funded by the County of Kaua‘i, requires the furnishing and installation of all materials, labor, transportation, tools, equipment, machinery, and services necessary to complete the roundabout in place. A pre-bid conference is available but not mandatory, and interested parties must register for the solicitation to access detailed documents. The Director of Finance reserves the right to cancel the invitation or reject any or all bids if deemed in the best interest of the County. Bids must be submitted exclusively through the Public Purchase System, and vendors not yet registered must initiate their registration via the official Kaua‘i County website or publicpurchase.com. Point of contact for inquiries is Cienna Barretto, reachable at (808) 241-1961 or cbarretto@kauai.gov.

County of Kauai

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Urban Street Paving and Asphalt Concrete Placement

POSTED

about 12 hours ago

DEADLINE

in about 1 month

4th Street Mobility Improvements Project and Downtown Bus Stop Improvements Project, Specification No. PW 23-59

Solicitation # PW 23-59

The City of Oxnard is soliciting sealed bids for the 4th Street Mobility Improvements Project and Downtown Bus Stop Improvements Project under Specification No. PW 23-59, with bids due by 2:00 PM on September 9, 2026. The project encompasses a comprehensive range of infrastructure enhancements along 4th Street from C Street to Oxnard Boulevard, including new concrete sidewalks, curb and gutter, road and driveway reconstruction, electrical conduit and pull boxes for street lighting, traffic signals, bus shelters, street furniture, bike lanes, landscaping, and an irrigation system, with striping improvements extending to Meta Street and the intersection with 6th Street. Additionally, approximately fifty downtown bus stops will be upgraded. Work will involve demolition of existing pavement, curbs, gutters, and sidewalks; removal and replacement of street lighting and trees; excavation and reconstruction of roadways; installation of storm drains and concrete structures; adjustment of utility covers to finished grade; placement of asphalt concrete; and final traffic striping. All work must comply with the 2018 edition of the Standard Specifications for Public Works Construction and all amendments through the 2021 edition, collectively referred to as the Greenbook. Bidders must obtain all contract documents exclusively through the City’s electronic bidding portal at Planet Bids, as the Public Purchase platform is not used for this solicitation. Questions regarding the project should not be posted on any public forum. The project is administered by the City of Oxnard’s Public Works Projects Department, and inquiries can be directed to pw-publicprojects@oxnard.org or (805) 385-8280. Bid submissions are required to be sealed and delivered by the stated deadline, and the work is to be performed entirely within the City of Oxnard, California. No set-aside designation is specified, and all prospective contractors are expected to meet the full scope of construction requirements as detailed in the contract documents.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Asphalt Paving and Site Surfacing

Dekalb County Board of Education

POSTED

about 12 hours ago

DEADLINE

Paving and Asphalt Services

Department of Public Safety

POSTED

about 13 hours ago

DEADLINE

Paving and Asphalt SurfacingThe contract pertains to grading, base preparation, and asphalt paving for roadways and access points under the NAICS code 237310, classified as a subcontract with a posting date of August 6, 2026, and a response deadline of September 16, 2026. Work is to be performed in Fresno, California, under the jurisdiction of the California Department of State Hospitals, and the project involves comprehensive pavement construction activities including site preparation and surface application. The contract does not specify a set-aside status or point of contact, and all submissions must be completed through the California eProcurement portal prior to the stated deadline.

California Department of State Hospitals

POSTED

about 14 hours ago

DEADLINE

in about 1 month

1111298R Re-Bid IH-35 Boat Ramp at Lake Dunlap

Solicitation # 1111298R

The solicitation for the re-bid of the IH-35 Boat Ramp at Lake Dunlap, identified by solicitation number 1111298R, is issued by the Texas Parks and Wildlife Department under the SLED category and was posted on August 6, 2026. Proposals must be submitted by September 15, 2026, at 8:00 PM CST, with all documents available electronically through the provided web portal. A non-mandatory pre-proposal meeting is scheduled for August 18, 2026, at 10:30 AM CST via Microsoft Teams to provide additional context and answer potential questions from interested parties. The place of performance is located in Texas, specifically at Lake Dunlap, and primary point of contact for inquiries is Mindi Johnson, reachable by phone at 512-389-8282 or email at Mindi.Johnson@tpwd.texas.gov. The solicitation does not specify a NAICS code or set-aside type, and further details can be accessed via the Texas SMARTbuy portal.

Parks and Wildlife Department

POSTED

about 15 hours ago

DEADLINE

in about 1 month

CHIP SEAL SURFACE TREATMENT OF TRUNKLINE ROAD

Solicitation # BPM057844

Caroline County, Maryland, is soliciting bids for the Chip Seal Surface Treatment of Trunkline Road under RFP# CCDPW2027-01, with work encompassing roadway base repair and build-up, limited clearing, the application of four courses of chip seal surface treatment, and stabilization of disturbed areas. The project includes base construction using BRG material to a depth of 12 inches across the full roadway and shoulder width, excavation and backfill for roadway widening, and installation of 4-inch wide yellow centerline pavement markings, all in compliance with Maryland Department of Transportation State Highway Administration Standard Specifications, particularly Category 500 Paving, Section 503 Chip Seal Surface Treatment. The bid consists of six base items covering mobilization, sediment and erosion control, roadway widening, base build-up, chip seal application, and pavement marking, along with eight contingency or alternative items for potential additional work, with pricing to be submitted on unit price basis for each measured quantity. Bids must be submitted in sealed envelopes marked with the correct RFP identifier and delivered by 9:30 a.m. on August 13, 2026, or as amended to 9:00 a.m. on August 14, 2026, to the Caroline County Commissioners’ office at 109 Market Street, Denton, Maryland, with strict adherence to formatting requirements including one original signed copy and the inclusion of bid security equal to five percent of the bid amount via certified check or bond. All bidders must be responsible and responsive, meeting qualification standards and submitting required certifications including a completed Bid/Proposal Affidavit, Federal Taxpayer Identification Certification (W-9) for first-time successful bidders, insurance certificates meeting minimum liability limits of $2 million per occurrence and $3 million annual aggregate, workers’ compensation coverage of $1 million per occurrence, and automobile insurance per Maryland state requirements, with the County listed as additional insured. Bidders must also affirm compliance with ethics, non-discrimination, and anti-collusion provisions, certify familiarity with the County’s Code of Ethics and Substance Abuse Policy, validate absence of criminal convictions related to fraud or bribery, and confirm they are not suspended or debarred by any public entity. The County reserves the right to reject any or all bids and will award to the lowest qualified, responsible, and responsive bidder based on best value, considering total price, experience, compliance with specifications, and local preference of up to five percent

Caroline County Government

POSTED

about 15 hours ago

DEADLINE

524048 - AGENCY WIDE PAVING ALL MARINE TERMINALS

Solicitation # BPM058299

The Maryland Port Administration is seeking proposals under solicitation BPM058299 for a comprehensive paving and infrastructure services contract covering all its marine terminals in Baltimore, Maryland, including Dundalk, North and South Locust Point, Fairfield, Masonville, Hawkins Point, and the World Trade Center Building. The scope encompasses a wide range of activities including asphalt and concrete pavement removal and replacement, milling, joint and crack sealing, bituminous overlays, slurry sealing, manhole and inlet adjustments, curb and sidewalk removal, pavement marking installation and obliteration, trenching, excavation, grading, sediment and erosion control, traffic maintenance, and drainage system repairs. The contract requires adherence to Maryland State Highway Administration standards and MPA-specific technical specifications, with materials delivered in original sealed containers and stored to preserve integrity. Work must comply with strict environmental protocols for hazardous materials like chromium-contaminated waste, used oil, and anti-freeze, including proper labeling, storage, and secondary containment. The project has a strict 1095-day performance period from Notice to Proceed, with a not-to-exceed value of $10 million, including predefined allowances for unanticipated work, test pavements, temporary barriers, and chromium compliance. Award will be made to the offeror with the highest total evaluated points, determined by a 70-point weighting to the lowest total price and a 30-point weighting to the lowest margin percentage for added or changed work. Submission requires technical and financial proposals sent via email in separate, password-protected files under strict formatting and size limits, with all required affidavits, bonds, and certifications included. The contract mandates compliance with Maryland’s Commercial Nondiscrimination Policy and state law requirements for minority business enterprises (MBE) and veteran-owned small business enterprises (VSBE), with respective procurement goals of 15% and 2%. Offerors must submit affidavits certifying compliance with these goals and provide MBE and VSBE participation documentation. A 5% proposal bond is required, followed by performance and payment bonds upon award, each with a penal sum equaling the accepted bid amount. Contractors must carry substantial insurance coverage, including $1 million automobile liability, $10 million umbrella liability, and $2 million railroad protective liability. Prevailing wage rates must be paid as per state law, and all work must conform to the MPA General Provisions for Construction Contracts. A one-year warranty period applies after final acceptance, and changes must be issued via formal written order by the Procurement Officer. Payment

Maryland Port Administration

POSTED

about 16 hours ago

DEADLINE

in about 1 month

2026 Lehigh Township Road Program - Timberline Road Reconstruction - Contract 1 - Pipe Replacement; Contract 2 - Pavement Improvements

Solicitation # Lehigh Township, Northampton County, PA

Bids for the 2026 Lehigh Township Road Program – Timberline Road Reconstruction must be submitted electronically through the PennBid platform by 11:00 a.m. on August 25, 2026, with public opening to occur immediately afterward at the Township Engineer’s Office in Bartonsville, Pennsylvania. The project encompasses the full 14,045-foot length of Timberline Road and includes stormwater pipe replacement along with pavement improvements comprising approximately 34,332 square yards of cold in-place recycled asphalt base course, scratch/leveling course, and wearing course overlay. All bidders are required to submit a bid security equaling 10% of their total base bid in the form of a bid bond, certified check, or cashier’s check, and bids must remain valid for 60 days after the opening date. Contractors and subcontractors must be pre-qualified by PennDOT under Work Class Codes E, F, and H for flexible base, bituminous, and drainage work respectively. Compliance with Davis-Bacon wage requirements is mandatory, and weekly certified payrolls must be submitted. The project is funded through Northampton County’s Community Development Block Grant Program, and Lehigh Township retains the right to waive minor irregularities or reject any or all bids as it deems in the public interest. Final questions must be submitted by 1:00 p.m. on August 19, 2026, and all bid documents are available free of charge at the PennBid website.

Northampton County

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → Nuwc Division Newport

Same awarding agency

Unable to Identify Subcontract OpportunitiesDue to a configuration error where the FOUNDRY_API_URL was not set, the system was unable to access prime contract data, preventing the identification or decomposition of any subcontract opportunities. As a result, the solicitation titled "Unable to Identify Subcontract Opportunities" was posted on August 6, 2026, with a response deadline of August 14, 2026, and is classified as a Small Business Set Aside under the SBA, indicating it is intended entirely for small businesses. The agency involved is Nuwc Division Newport under the Department of Defense, but no solicitation number, NAICS code, office address, place of performance, or point of contact information is available due to the data access failure. The opportunity remains listed in the system with a public link for reference, though no actionable subcontract details can be derived until the underlying configuration issue is resolved.

POSTED

DEADLINE

Surveying and Right-of-Way StakingThe contract involves topographic surveying, boundary verification, and construction staking services specifically for a highway alignment project, to be carried out in Newport, Rhode Island, with a zip code of 02841. The work is categorized under NAICS code 541370, indicating it falls under engineering services, and is structured as a subcontract within the Department of Defense framework, managed by Nuwc Division Newport. The solicitation was posted on August 6, 2026, and responses are due by August 18, 2026, at 3:00 PM, with no set-aside provisions applied. The scope requires precise geospatial data collection and layout services to support infrastructure development, ensuring alignment accuracy and compliance with right-of-way boundaries. All deliverables must meet federal standards for surveying and construction support in a defense-related environment.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Erosion Control and Stormwater ManagementThe contract pertains to the installation of erosion control and stormwater management measures at a location in Newport with a ZIP code of 02841, under the authority of the Naval Undersea Warfare Center Division Newport, a U.S. Department of Defense entity. The scope includes the implementation of silt fencing, hydroseeding, and stormwater basins to mitigate soil erosion and manage runoff, ensuring compliance with environmental and regulatory standards. This is a subcontract opportunity classified under NAICS code 561730, which covers other support activities for waste management, indicating the nature of the work aligns with environmental services and site restoration. The solicitation was posted on August 6, 2026, and responses are due by August 18, 2026, at 3:00 PM Eastern Time. There is no specified set-aside type, suggesting the opportunity is open to all eligible subcontractors without preferential targeting. The place of performance is fixed at Newport, and while the agency's office address details are not provided, the work must be completed on-site at the specified location. Interested parties must submit proposals through the provided SAM.gov link before the deadline to be considered for award.

Landscaping Services

POSTED

DEADLINE

Concrete Barrier Wall ConstructionThe contract is for the forming, reinforcing, and pouring of concrete median and roadside barrier walls under a subcontract solicitation issued by the Naval Undersea Warfare Center Division Newport, part of the Department of Defense. The work is to be performed in Newport, Rhode Island, with a zip code of 02841, and falls under the NAICS code 238110 for concrete work contractors. The solicitation was posted on August 6, 2026, and responses must be submitted by August 18, 2026, at 3:00 PM Eastern Time. No set-aside classification or description is provided, indicating the opportunity is open to all eligible subcontractors without preference-based restrictions. The contract involves precise concrete construction techniques required for high-impact traffic safety structures, demanding adherence to engineering specifications and safety standards typical of defense infrastructure projects. The location and agency suggest the barriers may be installed on military installations, access roads, or perimeter fencing requiring robust, durable concrete construction.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Electrical Installation for Highway LightingThe contract involves the installation of electrical systems along highway corridors, specifically focusing on conduit, wiring, and lighting fixtures to support highway lighting infrastructure. The work is classified under NAICS code 238210, indicating it falls under electrical contracting services, and is structured as a subcontract under the Department of Defense, with the Naval Undersea Warfare Center Division Newport as the responsible agency. Performance of the work is required in Newport, Rhode Island, with a ZIP code of 02841, and the solicitation was posted on August 6, 2026, with a response deadline of August 18, 2026, at 3:00 PM Eastern Time. The contract does not include a set-aside designation, meaning it is open to all eligible bidders regardless of business size or status, and the place of performance is limited to the specified location. Bidders should prepare to meet technical and logistical requirements for working along active highway corridors while adhering to federal infrastructure standards.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

MIMs Module Mating Rail Fixtures - Sole Source

Solicitation # N6660426Q0457

The Naval Undersea Warfare Center Division Newport is soliciting quotations for eleven MIMs Module Mating Rail Fixtures under a sole-source, firm fixed price purchase order awarded to Cambridge Valley Machining Inc., with a performance period spanning a base year and two option years from October 5, 2026, through October 4, 2029. This procurement is conducted under streamlined commercial items procedures per FAR Subpart 12.6, with no formal written solicitation issued, and the RFQ is open for response until August 17, 2026. The acquisition is unrestricted, classified under NAICS code 332710 with a small business size standard of 500 employees, and has been cleared by the Office of Small Business Programs and the Small Business Administration. Contractors must be actively registered in the System for Award Management and comply with all applicable FAR and DFARS clauses, including those related to cyber security, trade restrictions, labor standards, and reporting requirements. All delivered items with a unit acquisition cost of $5,000 or more must bear a Unique Item Identifier, and payment will be made via Government Purchase Card or WAWF if additional fees apply. The requirement includes stringent compliance with DFARS provisions governing safeguarding defense information, cyber incident reporting, export controls, sourcing of electronic parts, sea transportation of supplies, and restrictions on covered telecommunications equipment.

POSTED

DEADLINE

Solicitation # N6660426Q0188

This procurement is a sole-source solicitation issued by the Naval Undersea Warfare Center Division Newport for one Breakout Box, Part # 114-119-001, to be delivered to Newport, RI under a Firm Fixed Price purchase order. The requirement is exclusively for SEACORP due to the proprietary nature of the Breakout Box design, where sourcing from any other vendor would necessitate extensive redesign, resulting in unacceptable cost and schedule delays. The delivery window has been amended from nine to twelve months following receipt of the order, with a firm closing date for quotations set for 25 August 2026 at 1400 Eastern Time. The acquisition falls under NAICS Code 332439 with a small business size standard of 600 employees, and no set-aside is utilized. Payment will be processed electronically via WAWF, and all submissions must include price, delivery terms, point of contact details, CAGE code, and Unique Entity ID. Compliance with cybersecurity requirements is mandatory; offerors must maintain a current CMMC Level 2 (Self) assessment or higher, registered and active in the Supplier Performance Risk System (SPRS), and adhere to NIST SP 800-171 standards. The contractor must ensure ongoing compliance throughout the contract term, including annual affirmations of continuous compliance by an affirming official, and flow down CMMC requirements to subcontractors handling controlled unclassified information or federal contract information. The delivered item must be marked with a Unique Item Identifier (UID) as required by DFARS, must originate from the United States, and drop shipping is strictly prohibited. Registration in the System for Award Management (SAM) is required prior to award, and all proposals must be submitted via email before the deadline. Late submissions will not be considered, and the Government retains full discretion to determine future competitiveness based on responses received.

Other Metal Container Manufacturing

POSTED

DEADLINE

SCRAP METAL AGREEMENT

Solicitation # N6660426Q0491

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) has initiated a scrap metal recycling sales agreement to sell recyclable metal materials generated at its facility in Newport, Rhode Island. This is not a traditional contract but a sales agreement under the Solid Waste and Recycling Program, aimed at diverting 50% of solid waste from landfills by responsibly managing and selling scrap metal. The agreement requires qualified vendors to purchase scrap metal commodities at fixed net prices per gross ton, calculated as a percentage of the Fastmarkets price index for the Boston location, with pricing tied to the first issue of the index in the month the metals are received. Specific metal types—including mixed steel, aluminum solids and turnings, brass, stainless steel, copper wire, mixed wire, coupro nickel, and monel—are listed with defined pricing structures and container requirements. The vendor must supply 12 to 22 cubic yard lugger-style containers and/or 30 to 40 cubic yard roll-off dumpsters at no cost to the government and ensure pickup within two working days of notification, with pickups limited to weekday business hours unless otherwise approved. The vendor is responsible for complying with all federal, state, and local regulations, including Department of Transportation and Naval Station Newport safety and security protocols. Drivers must hold a CDL and obtain facility access badges, with the vendor covering all associated fees. The vendor’s facility must be located within 40 miles of NUWCDIVNPT to allow government personnel to witness weigh-ins, and all metals must be properly segregated at the source. Payment is made via electronic funds transfer by the 10th of each month for the prior month’s deliveries, based on Fastmarkets data submitted with invoices. A 20% deposit equivalent to three months of estimated generation is required before the first pickup. The vendor must indemnify NUWCDIVNPT against claims arising from their operations, assume full liability for damages caused to government property, and comply with strict rules preventing the use of government branding in any advertising. The agreement runs for one year beginning October 1, 2026, with options for annual extensions up to a total of five years. Proposals must be submitted by August 18, 2026, and selection will be based equally on past performance and price, with no discussions allowed unless deemed necessary by the contracting officer. Any subcontracting requires prior written approval, and the original vendor remains fully responsible for all obligations.

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

Closure Protective Covers (CPCs)

Solicitation # N6660426Q0288

The Naval Undersea Warfare Center Division, Newport is seeking to procure Closure Protective Covers (CPCs) under a Firm Fixed Price contract as a total small business set-aside, with a strict not-to-exceed value of $197,000. The solicitation, numbered N6660426Q0288, is open exclusively to small businesses certified under NAICS code 332999 with no more than 750 employees, and requires full compliance with the Department of Defense’s cybersecurity and export control mandates. Offerors must hold a valid CAGE code, be registered in SAM with a current Unique Entity ID, and demonstrate CMMC Level 2 or higher certification with a current NIST SP 800-171 assessment score posted in the Supplier Performance Risk System. Technical compliance is evaluated against the JCM-14865 REV M drawing package, requiring material certifications for ASTM A240 CL304 stainless steel and ASTM-B-633 Type II Class 3 zinc plating, along with hydrostatic test results and a Certificate of Compliance. First Article approval is mandatory unless a waiver is submitted with evidence of prior identical production within the last five years. The contract includes two CLINs: CLIN 0001 for one first article unit and CLIN 0002 for production units, with the total value of both not to exceed $197,000. Award will be made using a Lowest Price Technically Acceptable methodology, prioritizing the highest quantity of CPCs within the funding limit. Deliveries are FOB Destination to NUWCDIVNPT Newport, RI, and all items must be packaged and labeled per JCM-14865 REV M with Distribution Statement D and an export control warning notice. The full Contract Data Requirements List governed by DD Form 1423-1 must be submitted, and all documentation must be provided via email to Hannah Murphy by August 14, 2026, in Microsoft Office or Adobe Acrobat formats. Failure to meet any of the prescribed cybersecurity, export control, or small business requirements will result in disqualification.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Build-to-print Protective Enclosure Assemblies

Solicitation # N6660426Q0333

The U.S. Navy’s Naval Undersea Warfare Center Division Newport is soliciting build-to-print Protective Enclosure Assemblies under solicitation number N6660426Q0333, a 100% small business set-aside under NAICS code 332322, with all awards to be made on a Firm Fixed Price, Lowest Price Technically Acceptable basis. The contract requires delivery of 50 units initially, with four optional quantities of 50, 30, and 30 units exercisable within six-month intervals following the initial award, all subject to a maximum 20-week delivery timeline from award date. All items must strictly conform to Government drawing 8958885, and each unit with a government acquisition cost of $5,000 or more must bear a Unique Item Identifier per DFARS 252.211-7003. Delivery is F.O.B. Destination at Naval Station Newport, Rhode Island, with shipping charges included in the quoted unit price, and payment will be made electronically via Wide Area Workflow. Offerors must possess an active SAM registration and valid CAGE code, and must submit electronic quotes by the extended deadline of July 23, 2026, at 12:00 PM EST to the designated point of contact. Access to the controlled drawing and Distro D documentation requires a valid Joint Certification Program certification and submission of a DD Form 2345, in addition to maintaining a current CMMC Level 2 (self) assessment or higher posted in the Supplier Performance Risk System, along with a compliant NIST SP 800-171 assessment no more than three years old. The solicitation incorporates numerous FAR and DFARS clauses including provisions on cybersecurity, telecommunications prohibitions, past performance evaluation via SPRS, CUI handling, and commercial item contracting, with two deviations applied to FAR 52.212-3 and 52.212-5. Non-compliance with any certification, registration, or cybersecurity requirement will result in disqualification. A Contract Data Requirements List is required but not separately priced.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

All Up Round plus Canister Simulator (AURCS)

Solicitation # 45-0268

The Naval Undersea Warfare Center Division Newport is seeking industry input through a Request for Information to assess capabilities for the future fabrication of the All Up Round plus Canister Simulator, a complex developmental system requiring advanced manufacturing, precision machining, and stringent welding standards. Respondents must demonstrate the capacity to handle large, heavy components with detailed facility infrastructure including lifting and assembly capabilities, along with proven expertise in large-scale precision machining and welding that meets strict military specifications. The future contract effort would involve producing a First Article Unit for validation through Manufacturing Readiness Review and Physical Configuration Audit, followed by recurring production of AURCS units and associated Peculiar Support Equipment, plus ongoing engineering change management and supply chain obsolescence mitigation. The government will provide the Technical Data Package and Statement of Work upon solicitation but currently seeks evidence of industry readiness through a white paper response no longer than ten pages, complemented by supporting visuals. Companies responding must provide a comprehensive company profile including CAGE code, UEI, size classification under NAICS 336419, and point of contact details, while explicitly addressing five key capability areas: facility infrastructure for handling heavy components, precision machining experience with tight tolerances on large assemblies, welding program certification and NDT inspection capabilities, ability to meet aggressive production schedules, and relevant past performance in naval or submarine-related fabrication projects. Two government contract references are required, and proprietary information must be clearly marked. All responses are due by August 14, 2026, submitted via email to designated Navy points of contact. Importantly, this RFI is not a solicitation, does not obligate the government to award a contract, and respondents bear all costs associated with their submission. Access to controlled attachments, including the draft Statement of Work and background slides, requires a SAM.gov role and formal request with justification, and all received information will be handled as Controlled Unclassified Information.

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Subsea Hydraulic Pressure Unit

Solicitation # N66604-26-Q-0421

The Naval Undersea Warfare Center Division, Newport is soliciting a Firm Fixed Price purchase order for one subsea hydraulic pressure unit under solicitation N66604-26-Q-0421, with responses due by June 26, 2026, at 1400 EST. This procurement is a total small business set-aside under NAICS code 333996, with a size standard of 1,250 employees, and is open only to small businesses registered in the System for Award Management with a valid CAGE code and Unique Entity Identifier. The unit must meet stringent technical requirements including operation at subsea depths up to 200 meters, full functionality after one year of submersion in seawater while non-operational, delivery of hydraulic oil at 2000 PSI with a minimum flow rate of 1.0 GPM, and operation on a DC voltage bus between 275–410VDC with a maximum power draw of 3 kW. It must function in water temperatures ranging from 25°F to 86°F and include a standard control interface, with Ethernet preferred. The item must be new, manufactured and shipped from within the United States, and delivered to Newport, RI by November 30, 2026, under F.O.B. Destination terms. Offerors must provide a Unique Item Identifier (UID) for the unit, as its Government acquisition cost exceeds $5,000, in accordance with DFARS 252.211-7003. Technical acceptability is contingent upon meeting all performance specifications and delivering on schedule. Proposals must also include proof of CMMC Level 2 certification issued by SPRS at the time of submission, as this is a mandatory pass/fail requirement. The government will award to the lowest priced technically acceptable offeror. Payment preferences include Government Purchase Card if no surcharge applies; otherwise, payment will be processed electronically via Wide Area Workflow in compliance with DFARS 252.232-7003 and 252.232-7006. All submissions must be sent via email and include the contractor’s point of contact, CAGE code, UEI, price, and delivery terms. Failure to meet any mandatory requirement—including CMMC certification, UID labeling, U.S. origin, or new condition—may result in termination for cause and liability for excess

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE