Top

Paving and Asphalt Surfacing

Active

Federal

Response Deadline08/11/2026, 08:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Naval Air Warfare Center Air DivisionView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Saint Inigoes, MD, 20684, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 08:00:00 AM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Naval Air Warfare Center Air Division

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Air Warfare Center Air Division

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Grading, base preparation, and asphalt paving for roadways, parking lots, or access paths.

Similar Contracts

Same NAICS industry code

NAICS: 237310

New

DIBBS

Asphalt Paving and Site Surfacing

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Asphalt Resurfacing Multiple Roads

Solicitation # PE-67400-NONST-2027-000000011

Heard County Board of Commissioners in Georgia is soliciting bids for the asphalt resurfacing of multiple local roads under solicitation number PE-67400-NONST-2027-000000011, which was posted on August 5, 2026, with a response deadline of September 9, 2026, at 4:00 PM. The work will be performed within Heard County, Georgia, and is categorized under a state, local, or educational agency procurement. No set-aside preferences or NAICS codes are specified, indicating an open competition for qualified contractors. Katrina Billingsley serves as the primary point of contact and can be reached via email at hr@heardcountyga.com for inquiries or additional information regarding the solicitation. Interested parties must submit responses through the designated online portal before the deadline to be considered for award.

Heard County Board of Commissioners

POSTED

DEADLINE

Fleet Fast EV Charging - ConstructionThe Port of Seattle’s Aviation Project Management Group is forecasting a construction contract for fast EV charging infrastructure, aligned with NAICS code 237310 for Electrical and Other Wiring Installation. The solicitation is set to be released on July 31, 2026, and will focus on the installation of high-capacity electric vehicle charging systems to support fleet operations, likely targeting airport and ground service equipment. The project is expected to involve site preparation, electrical upgrades, and integration of charging hardware and software systems at unspecified locations within the Port’s aviation facilities. Key contacts for inquiries are Angela Peterson, the primary point of contact, and Katie Techa, the Project Manager, who can be reached via phone or email provided for further details. No set-aside provisions or eligibility restrictions are indicated at this time.

Aviation Project Management Group

POSTED

DEADLINE

Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will revitalize the entry and exit drives along 19th Ave W, along with the former Downie Building (C-14) footprint and surrounding parking areas. Existing pavement in deteriorated condition will be milled and resurfaced, while aging stormwater infrastructure will be fully replaced and expanded to divert runoff from combined sewer lines into dedicated storm drainage systems, with water quality treatment incorporated where qualifying pavement surfaces are replaced. The remaining concrete slab from Phase 1 will be demolished to make way for a blended layout of new parking spaces and native green space designed as a pollinator habitat, potentially housing a stormwater treatment facility. An irrigation system will be installed to support the new landscaping, which will also extend to the median along the entry drive. New electric vehicle charging stations will be integrated into the expanded parking area, and a protected two-way bike lane will be constructed to connect the terminal’s entry directly to the West Wall bike path, enhancing multi-modal accessibility. Pedestrian pathways will be upgraded to improve connectivity to the intersection of 21st Ave W and W Emerson Pl, as well as the adjacent King County Metro bus stop. Lighting will be enhanced throughout the newly configured parking and path areas, and comprehensive wayfinding systems will be implemented to guide pedestrians and cyclists through the redeveloped campus. The project is forecasted to be solicited under NAICS code 237310 by the Port of Seattle’s Waterfront Project Management office, with primary contact information provided for project inquiries and coordination.

Waterfront Project Management

POSTED

DEADLINE

Asphalt Paving & Striping Unit Price Portwide 2026The contract encompasses a broad range of pavement and infrastructure maintenance activities across multiple Port of Seattle locations including Seattle-Tacoma International Airport, Maritime Properties, and adjacent areas. Work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, haul and disposal of grinding spoils, removal of existing striping, surface preparation for new markings, various stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, sidewalk lifting and leveling, and drainage system enhancements. All work requires adherence to performance standards and may involve obtaining necessary permits for improvements to public infrastructure. This procurement is issued under the title Asphalt Paving & Striping Unit Price Portwide 2026 by the Port Construction Services division of the Port of Seattle. The solicitation is posted as a forecast with a NAICS code of 237310 indicating highway and street construction. Primary point of contact is Heather Bowden, with Lesley Miles serving as project manager; inquiries should be directed via their provided email addresses and phone numbers. The contract will be administered across numerous port-wide sites with performance expected to meet specified technical and safety requirements, though no specific location details are provided in the data. The forecast date of July 31, 2026, suggests this is a planning notice for future work, not an active solicitation.

Port Construction Services

POSTED

DEADLINE

Town of Chelsea - Upper Village Rd Paving Request for Bids

Solicitation # 75027

The Town of Chelsea is seeking bids for a paving project on Upper Village Road, divided into two distinct sections. Section 1, the base bid, covers approximately 3,710 feet from Baraw Hill Road to the end of the existing pavement, requiring leveling and overlaying the current surface with a minimum pavement depth of two inches while matching the existing roadway width; detailed pavement layout at the intersection with Washington Turnpike is provided in the attached sketch. Section 2 is an add-alternate bid extending approximately 2,665 feet from the end of the existing pavement to the intersection of South Washington Road and Corinth Road, where the existing gravel roadway must be graded and compacted, followed by the placement of two two-inch lifts over a 22-foot width. Bids must be submitted by August 14, 2026, at 9:00 AM, with the solicitation posted on August 5, 2026, under reference number 75027. All inquiries should be directed to the Town Administrator at town.administrator@chelseavt.us or 802-625-2023, and further details are available via the provided Vermont Business Registry link.

Department of Economic Development

POSTED

DEADLINE

LACSD Surface Water PFAS Removal Project No. 251, CA

Solicitation # lacsd-surface-water-pfas-removal-project-no-251-ca

The contract pertains to the design and construction of PFAS treatment facilities at the Bernina and Cedar Glen Water Treatment Plants in California, encompassing comprehensive civil, structural, mechanical, electrical, instrumentation, and process upgrades necessary to remove per- and polyfluoroalkyl substances from public water supplies. The project is structured as a solicitation under solicitation number lacsd-surface-water-pfas-removal-project-no-251-ca, with a response deadline of September 3, 2026, and is classified under NAICS code 237310 for water and wastewater treatment plant construction. It is designated for Disadvantaged Business Enterprise participation as defined by the Department of Transportation, encouraging eligibility and involvement from underrepresented contractors. The awarding entity is Pyramid Building & Engineering, Inc., and all project-related inquiries and submissions must be directed to John Garrison, the primary point of contact, via email or phone provided. Performance of the work is exclusively required within California, though the precise city and ZIP details are not specified, and the solicitation was posted on August 5, 2026.

Pyramid Building & Engineering, Inc.

POSTED

DEADLINE

NCMT Berth 24-11 Structural Repair

Solicitation # ncmt-berth-24-11-structural-repair-0

The contract entails the comprehensive rehabilitation of the existing concrete marginal wharf at National City Marine Terminal Berth 24-11 in San Diego, California, along with the reinstallation of the shore power system, as detailed in the contract drawings and specifications. The scope of work encompasses a wide array of specialized services including demolition, asbestos and lead abatement, contaminated soil removal, concrete coring and saw cutting, underwater pile jackets, diving operations, environmental monitoring, LIDAR surveying, materials testing, and utility work for storm drain, electrical, and water systems. Multiple subcontracted activities are required, reflecting the complexity and technical nature of the project, with significant emphasis on environmental compliance, safety, and structural integrity. The project is being procured by the San Diego Unified Port District, with Kiewit Infrastructure West Co. serving as the prime contractor responsible for managing subcontractors and ensuring all work adheres to the referenced plans and specifications, which are available for review upon request. Bidders and subcontractors must satisfy stringent eligibility requirements, including possessing a valid California Contractor’s License, being registered with the Department of Industrial Relations, and providing acceptable insurance coverage. Subcontractors and material suppliers performing onsite work must be signatory to collective bargaining agreements with carpenters, laborers, cement masons, ironworkers, operating engineers, and teamsters, in compliance with the Project Labor Agreement. Additionally, 100% bonding is mandatory for responsible subcontractors and material contractors, with Kiewit agreeing to reimburse bond premiums. The solicitation prioritizes participation from Disadvantaged Business Enterprises, Disadvantaged Veteran Business Enterprises, Minority Business Enterprises, and Woman Business Enterprises, requiring certification through recognized programs such as the SBA, USDOT’s DBE program, WBENC, or NMSDC. All proposals must be submitted via the BuildingConnected system, with a strict deadline of August 6, 2026, at 2:00 p.m. Failure to meet any of the pass/fail gates—license, DIR registration, insurance, or labor harmony—will render a bidder non-responsive. The contract does not specify total value, payment terms, or period of performance, but places significant administrative emphasis on compliance, socioeconomic participation, and labor standards.

Kiewit Infrastructure West Co.

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, BLANCO CO, HOT-MIX COLD-LAID

Solicitation # 6496-52-001_0926

The Texas Department of Transportation has issued a maintenance contract for a hot-mix cold-laid asphalt project along U.S. Highway 281 in Blanco County, with an estimated cost of $2,782,000. This solicitation, identified by number 6496-52-001_0926, was posted on August 5, 2026, and responses are due by September 2, 2026. The work involves pavement maintenance using cold-laid hot-mix asphalt techniques, targeting routine infrastructure upkeep rather than new construction. The contract is classified under a SLED organizational type, indicating it is a state, local, or education entity initiative, and is administered through the Texas SmartBuy procurement portal. Primary contact for inquiries is available via the provided phone number, and performance of the contract will occur entirely within Texas, specifically along the designated highway segment in Blanco County.

Texas Department of Transportation

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, LA SALLE CO, DEBRIS REMOVAL

Solicitation # 6506-24-001_0926

The Texas Department of Transportation has issued a maintenance contract for debris removal along Interstate Highway 35 in La Salle County, with an estimated cost of $1,268,533.20. The solicitation, identified as 6506-24-001_0926, was posted on August 5, 2026, and bids are due by September 2, 2026, at 7:00 PM. This contract is classified as a state-level maintenance effort under the SLED category and is open to qualified contractors seeking to perform necessary debris clearance operations on the specified highway segment. All work will be performed within the State of Texas, and the primary point of contact for inquiries is available through the provided phone number. The contract is accessible through the Texas SmartBuy portal and does not specify a set-aside program or NAICS code, indicating it is open to general competition. There are no additional details provided regarding subcontracting requirements, performance timelines, or specific debris types, but the scope is focused exclusively on removal activities along IH-35 in La Salle County. Contractors are expected to comply with state transportation standards and safety protocols during execution, and all documentation and communications should be directed through the designated agency point of contact.

Texas Department of Transportation

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, WEBB CO, SEAL COAT

Solicitation # 6500-58-001_0926

The Texas Department of Transportation has issued a solicitation for a seal coat maintenance project along US-83 in Webb County, Texas, with an estimated contract value of $6,683,574.77. The work is to be completed within 120 working days, with bid submissions due by 1:00 PM on September 3, 2026, through the Electronic State Business Daily and Electronic Bidding System. The project is classified under NAICS code 237310 and is administered by TxDOT, with the primary point of contact for questions located in Laredo, Texas, and a secondary contact at the Austin headquarters. No small business participation goal has been established, as the SBE goal is set at 0.0%. A performance guaranty in the amount of $100,000.00 is required from the contractor to ensure compliance and timely completion. The work location is specifically defined as Highway US-0083 in Webb County, and all performance must occur at this site. The full scope of work, technical specifications, inspection criteria, and acceptance standards are detailed in the official solicitation documents accessible only through the designated electronic systems. Although the solicitation number and control number are provided, no contract type such as firm-fixed-price or IDIQ is specified, and no detailed line-item pricing, clause references, subcontracting requirements, or packaging and marking specifications are included in the available data. All administrative details, including payment procedures, accounting codes, and point of contact roles, are either incomplete or not disclosed in the public-facing solicitation materials. Bidders are directed to the official portals for complete and authoritative documentation.

Texas Department of Transportation

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, FAYETTE CO, THERMOPLASTIC PAVEMENT MARKINGS

Solicitation # 6500-91-001_0926

The Texas Department of Transportation is soliciting bids for a state-let maintenance contract to install thermoplastic pavement markings on a 0.01-mile segment of State Highway 0159 in Fayette County, Texas, with an estimated contract value of $1,182,215.39. The solicitation, numbered 6500-91-001_0926, was posted on August 5, 2026, and responses are due by September 2, 2026, at 1:00 PM Central Time, to be submitted electronically through the Electronic State Business Daily or the Electronic Bidding System. The contract requires completion within 75 working days from the start date, with a mandatory performance guarantee of $24,000.00, and no Small Business Enterprise participation goal is set. The place of performance is strictly limited to the designated highway segment in Fayette County, and the Texas Department of Transportation will oversee inspection and acceptance of work at the project site. While detailed technical specifications, clause provisions, evaluation factors, and pricing line items are not included in the public notice, bidders are directed to consult the official ESBD and EBS portals for complete documentation, including TxDOT Standard Specifications and any addenda. Payment, invoicing, and contract administration details are not specified in the available information, and no contracting officer or representative is formally named, with general inquiries to be addressed through provided contact points. All submissions must comply with electronic submission requirements, and no physical or alternative media alternatives are indicated.

Texas Department of Transportation

POSTED

about 5 hours ago

DEADLINE

in 28 days

View Details

More opportunities from Department Of Defense → Naval Air Warfare Center Air Division

Same awarding agency

NAICS: 541330

New

Federal

NAWCAD WOLF EPF REQUEST FOR OFFER

Solicitation # N0042126R1024

The U.S. Navy’s Naval Air Warfare Center Aircraft Division is soliciting proposals under solicitation number N0042126R1024 for engineering, prototyping, and fabrication support services under a hybrid contract structure combining Cost-Plus-Award-Fee (CPAF) and Fixed-Price Level-of-Effort (FFP LOE) arrangements. The solicitation, issued on August 5, 2026, with a deadline for submissions at 2:00 PM EDT on August 24, 2026, requires offers to be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE), and includes a structured response format divided into three volumes: Key Personnel, Technical Approach with oral presentation, and Cost/Price documentation including detailed workbooks and narratives. Performance will be centered at the Naval Air Warfare Center in Saint Inigoes, Maryland, with a base period running from October 8, 2026, through October 7, 2027, and four optional one-year extension periods through October 7, 2031. The contract value is estimated between $54.86 million and $70.43 million, excluding Not Separately Priced (NSP) items for technical data and contractor-acquired property, which have no assigned dollar value but remain subject to performance and compliance requirements. Proposals must meet stringent submission guidelines, including file formats exclusively in Microsoft Office 2016 formats (.docx, .xlsx, .pptx, .pdf), strict adherence to page limits for key personnel (5 pages per individual) and oral presentations (40-slide recommendation), and compliance with formatting rules such as 12-point Times New Roman, single spacing, and 1-inch margins. Submission of inaccurate or noncompliant files may result in disqualification. Evaluation is conducted in a two-phase process: first, offerors must pass a mandatory gatekeeping evaluation of Key Personnel, and only then is the Technical Approach assessed comparably across submissions. Cost/Price is evaluated solely for the highest technically ranked offeror to ensure fairness and reasonableness, aligning with a Best Value approach without trade-offs between technical merit and cost. Special contract requirements include an 85% utilization rule for FFP LOE hours with automatic price adjustments for underperformance, stringent Organizational Conflict of Interest (OCI) prohibitions and mitigation plans, proprietary data protection obligations, and mandatory security protocols for classified work under DD

POSTED

DEADLINE

REPAIR AND CALIBRATION P/N: E8257DN01;: E8257DN01;E825;E8257DN017DN01;

Solicitation # N0042126Q1313

The U.S. Government, acting through the Naval Air Warfare Center Air Division, intends to sole source a firm fixed-price procurement for the repair and calibration of equipment with part number E8257DN01 to Keysight Technologies under Federal Acquisition Regulation Part 13. This solicitation, N00421-26-Q-1313, is issued as a sole source intent and requires all responses to be submitted via email to Johnny E. Smith and Benjamin R. Flores no later than August 10, 2026, at 12:00 p.m. Eastern Standard Time. Offers must be submitted by vendors registered in SAM.gov, and all proposers must comply with FAR 52.204-26 regarding delinquent tax liabilities and felony convictions, with appropriate documentation linked to the submission. The quote must include complete technical details sufficient for evaluation and must represent the vendor’s best and final offer in terms of both price and technical compliance. The offer must contain specific information including FOB terms, shipping costs, Tax ID, Dun & Bradstreet number, CAGE code, small business status, estimated delivery date, and total cost in U.S. dollars. A signed authorization confirming the vendor’s status as an authorized distributor is mandatory. The equipment will be repaired and calibrated at the specified delivery location in Patuxent River, Maryland, and compliance with all requirements in Section B and Section C of the Statement of Work is essential for award consideration. The government points of contact for inquiries are Johnny E. Smith and Benjamin R. Flores, both located at NAWCAD Procurement Group, and questions must be directed strictly via email due to limited capacity for mail or voicemail responses. No other bid formats or methods will be accepted.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Ready-Mix Concrete Supply

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Heavy Haul and Equipment Transport

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Environmental Compliance and Monitoring

Environmental Consulting Services

POSTED

DEADLINE

Surveying and Site Layout Services

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Concrete Formwork and Placement

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Plumbing and Piping Systems Installation

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and Wiring Services

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

NAWCAD WOLF-Micron Solid State Drive

Solicitation # N0042126Q1310

The U.S. Navy, through the Naval Air Warfare Center Air Division, is soliciting a firm fixed-price procurement for the Wolf-Micron Solid State Drive under solicitation N0042126Q1310, issued as a brand name requirement exclusively for Trivad Inc. with no substitutions permitted under FAR Part 8.405-6(b)(1). All offers must be submitted via email to Gabrielle McKee no later than 4:00 PM Eastern Time on August 11, 2026, and vendors must be registered in the System for Award Management (SAM) prior to submission. Offerors must be authorized distributors or resellers of the branded product and must provide signed documentation verifying this authorization, along with evidence of TAA compliance and the country of origin for the goods. The procurement is set aside exclusively for small businesses, and the award will be made to the lowest-priced offer that meets or exceeds the technical acceptability standards, with evaluations based solely on the information provided in the quote. Each response must include completed fill-in clauses detailing FOB destination, shipping and IUID labeling costs, Tax ID, UEID, CAGE code, small business status, estimated delivery date, and total amount, and must be accompanied by sufficient technical documentation such as data sheets or specifications. A copy of any applicable pricelist must also be included. Performance will occur at Saint Inigoes, Maryland, with the point of contact for all submissions being Gabrielle McKee at the designated Navy email address. The NAICS code for this requirement is 334118, and proposals received after the deadline will not be considered under any circumstances.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

V-22 Flexible Confined Detonating Cord Assemblies (FCDCAs)

Solicitation # N00421-26-RFPREQ-WPM202-0312

The U.S. Naval Air Warfare Center Air Division intends to award a sole-source, firm-fixed-price delivery order to Ensign-Bickford Aerospace and Defense Company for the procurement of V-22 Flexible Confined Detonating Cord Assemblies, leveraging an existing Basic Ordering Agreement. This action is justified under Federal Acquisition Regulation 6.103-1 and 10 U.S.C. 3204(a)(1), as Ensign-Bickford is the only qualified and responsible source capable of meeting the specific technical and operational requirements of the V-22 program. The estimated award date is 30 October 2026, with a performance period of 360 days after delivery. The delivery order will be placed under BOA N0017426G1004, and no competition is anticipated due to the unique nature of the assemblies and the absence of alternative suppliers. While other sources may submit capability statements, there is no obligation to consider them or to proceed with an award. The place of performance is in Simsbury, Connecticut, and all contractual obligations will be managed through the designated point of contact, Christopher Woehrer. There is no government commitment to issue a solicitation or to reimburse any costs incurred by potential offerors prior to award.

Explosives Manufacturing

POSTED

DEADLINE

MJ21, CCU-92/A Electrical Cartridge

Solicitation # N00421-26-RFPREQ-WPM202-0314

The U.S. Government intends to award a sole-source, firm-fixed-price delivery order to Ensign-Bickford Aerospace and Defense Company for the procurement of MJ21, CCU-92/A Electrical Cartridges in standard, overloaded, and underloaded configurations. This action is authorized under FAR 6.103-1 and 10 U.S.C. 3204(a)(1) due to the company being the sole responsible source capable of meeting the specific technical and operational requirements, with no other suppliers able to satisfy agency needs. The delivery order will be issued under the existing Basic Ordering Agreement N0017426G1004, with an estimated award date of October 30, 2026, and a performance period of 360 days following the contract date. Although the notice invites other responsible sources to submit capability statements, the Government has determined that only Ensign-Bickford possesses the necessary expertise and resources. Subcontracting opportunities may be available through the prime contractor, located at 640 Hopemeadow St., Simsbury, CT 06070-2420. The solicitation number is N00421-26-RFPREQ-WPM202-0314, with a response deadline of August 18, 2026, and the contracting activity is managed by the Naval Air Warfare Center Air Division in Patuxent River, MD. No financial commitment or obligation is made by the Government, and all information is subject to change without notice.

Explosives Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days

View Details