Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pharmacy Cleanroom and IV Hood Certification Specialist

Open

Federal

Response Deadline11/24/2026, 11:00:00 AM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a Pharmacy Cleanroom and IV Hood Certification Specialist to support prime contractors on Department of Veterans Affairs medical center projects in Cincinnati, Ohio. The selected provider will perform technical certification and validation of non-hazardous pharmacy IV hoods and controlled environments, ensuring all work meets VAMC pharmaceutical standards. Key technical requirements include conducting laminar flow certification, operational particle counts, air sampling, and smoke pattern tests using digital recording, particle counters, and smoke generators. The contractor is responsible for delivering detailed certification reports for every piece of equipment tested. This requirement falls under NAICS code 541380 and is managed through the Department of Veterans Affairs Network Contract Office 10. Interested parties should note the response deadline of November 24, 2026.

General Info

Agency

Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Cincinnati, OH, 45220

Set-Aside

NONE

Documents

This scope was carved out of 36C25027Q0106.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

V301--539 - Fifth Floor Pharmacy Move Service Contract

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineNov 24

Submission deadline

Response Deadline

11/24/2026, 11:00:00 AM ESTin 14 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical certification and validation of non-hazardous pharmacy IV hoods and controlled environments for prime contractors on VA medical center projects. Conducts laminar flow certification, operational particle counts, air sampling, and smoke pattern tests with digital recording per VAMC pharmaceutical standards. Uses particle counters and smoke generators. Delivers certification reports for each piece of equipment.

Similar Contracts

Same NAICS industry code

Testing, Adjusting, and Balancing (TAB)

DAS Procurement

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Material Testing Services

Columbus Consolidated Government

POSTED

about 5 hours ago

DEADLINE

in about 1 month

BCL27*393919-Wisconsin State Profiicency Test-QM

Solicitation # SRC0000037638

The solicitation BCL27*393919 for the Wisconsin State Proficiency Test-QM is issued by the Clinical Laboratory Services agency in Alabama. This procurement is managed through the Alabama Buys portal, with a response deadline of November 18, 2026. The contract has an estimated value not to exceed $25,000 and allows for annual renewals for a total period of up to five years from the effective date. Performance is based in Alabama, and the State of Alabama maintains the right to inspect all products under the Universal Commerce Code before acceptance, noting that a delivery signature does not constitute final acceptance. Suppliers must adhere to strict legal and administrative requirements, including certification of non-collusion, registration with the Alabama Secretary of State for out-of-state entities, and compliance with the Beason-Hammon Act regarding the employment of unauthorized aliens. Enrollment in the E-Verify program is mandatory for suppliers with employees in Alabama. Additionally, contracts exceeding $25,000 require a Disclosure Statement filed pursuant to the Code of Alabama. Payment is handled electronically via state-issued credit cards, P-cards, or EFT, and all bids must include certification of registration and remittance of Alabama state and local sales, use, and lease taxes.

Clinical Laboratory Services

POSTED

about 5 hours ago

DEADLINE

RFP-2026-ENG-159

Solicitation # 49523

Solicitation RFP-2026-ENG-159 is a request for proposals issued by the Louisiana CPPJ Purchasing agency for emergency traffic control device monitoring and inspection services. This SLED organization project falls under NAICS code 541380 and requires performance within the state of Louisiana. Interested parties must submit their responses by the deadline of December 8, 2026, at 9:00 PM. Further details and submission guidelines can be accessed through the provided Bid Express portal using solicitation number 49523.

CPPJ Purchasing - Commodities / Services

POSTED

about 5 hours ago

DEADLINE

Geological and Integrity LoggingThis subcontract for Geological and Integrity Logging supports prime contractors on orphan well projects managed by the Ohio Department of Natural Resources. The scope of work involves performing comprehensive borehole logging, which includes loading holes with freshwater and utilizing specialized tools and software to run Gamma Ray, CCL, Temperature, Bond, and Caliper logs. These processes are essential for verifying geological formations, casing depth, cement bond quality, and hole diameter. The contractor is responsible for delivering detailed logging reports and data used to determine final cement plug depths. This opportunity falls under NAICS code 541380 and is associated with the Ohio Department of Natural Resources Oil and Gas division. Interested parties must submit their responses by the deadline of December 3, 2026.

Dnr900200 Oil And Gas Dnrfra

POSTED

about 5 hours ago

DEADLINE

V&V and Factory Acceptance Testing (FAT)

BC Rapid Transit (Skytrain)

POSTED

about 6 hours ago

DEADLINE

Aerospace Quality Assurance & Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

First Article Testing and Quality Validation ServicesThis subcontract for First Article Testing and Quality Validation Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized testing and validation, specifically executing First Article Tests on five units in accordance with MIL-F-16377/26 Table 1 and Section 4.3. The contractor is responsible for coordinating in-plant verification with DSMC-QAR and utilizing MIL-STD-1916 or ASQ H1331 sampling methods. The project requires the use of industrial testing equipment to ensure all military specifications are verified. Final deliverables include a comprehensive FAT Certification report and five validated test units. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing third-party quality assurance and zero-based sampling inspection services. The contractor is responsible for performing independent inspection and acceptance testing for prime contractors to verify dimensional accuracy and material integrity against NAS specifications. Technical execution requires the use of CMM and certified calibration tools to ensure compliance with MIL-STD-130N and ASTM D3951, while following sampling plans per MIL-STD-1916 or ASQ H1331. The project is located in New Cumberland, Pennsylvania, and falls under NAICS code 541380. To be eligible, the provider must maintain ISO 17025 certification and is required to deliver detailed inspection reports and Certificates of Conformance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Point-of-Origin Source Inspection ServicesThis subcontract for Point-of-Origin Source Inspection Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality assurance and source inspections for critical application items, utilizing precision measurement tools to ensure strict compliance with ASME B18.2.1 and MIL-STD-1916/ASQ H1331 sampling standards. Key deliverables include the submission of signed inspection reports and formal certifications of compliance. The work is performed in Anniston, Alabama, under NAICS code 541380 for the Department of Defense. Qualified candidates must hold a Certified Quality Auditor (CQA) or an equivalent professional certification to execute these technical requirements. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

FAA Airworthiness Certification and Conformance TestingThis subcontract, titled FAA Airworthiness Certification and Conformance Testing, involves performing critical airworthiness testing and certification for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will be responsible for verifying conformance to Technical Data Package Rev A Gen 1 and conducting the necessary inspections to issue Certificates of Airworthiness for Commercial Derivative Aircraft Parts and FAA Certified Parts. The work will be performed at Tinker AFB, and the contractor must possess the required FAA certification authority to officially issue airworthiness and conformance documentation. This Department of Defense effort falls under NAICS code 541380, with the primary deliverable being the final Certificate of Airworthiness and Conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

Same awarding agency

Specialized Medical and Pharmacy Equipment MoverThis subcontract opportunity with the Department of Veterans Affairs involves the specialized disassembly, packing, transport, and reassembly of medical equipment and pharmacy workstations at a medical center in Cincinnati. The scope of work includes disconnecting electrical power for IV hoods and workstations, utilizing RAM-board for floor protection during the hauling of fragile items, and ensuring all equipment is fully relocated and verified through a joint walkthrough. To be eligible for this project, the contractor must hold PUCO Certification and maintain appropriate liability insurance. Interested parties should note that the response deadline is November 24, 2026, and the work falls under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 12 hours ago

DEADLINE

6130--Uninterruptible Power Supply (UPS) for East Indianapolis VA Clinic

Solicitation # 36C25027Q0037

The Department of Veterans Affairs, Network Contracting Office 10, has issued a Sources Sought Notice under solicitation number 36C25027Q0037 to conduct market research for Uninterruptible Power Supply (UPS) backups for pharmaceutical refrigerators at the East Indianapolis VA Clinic. The agency is seeking information on domestic, Made in America sources capable of providing two types of UPS units designed for healthcare environments. Type One consists of three units with at least 2000 Watts output and 4000 Watts surge capacity, capable of powering a half-size pharmaceutical refrigerator for 88 hours and designed for wall mounting. Type Two consists of one unit with at least 3000 Watts output and 6000 Watts surge capacity, capable of powering a full-size pharmaceutical refrigerator for 88 hours. Both types of units must feature single-phase 120 VAC, 60 Hz output with a pure sine wave, a transfer time of less than 20 milliseconds, and utilize NEMA 5-20P connections with at least two 120V NEMA 5-20 duplex receptacles. Interested parties must be registered in the System for Award Management (SAM) and are requested to submit their company details, Unique Entity Identifier, socio-economic status, place of manufacture, and product specifications to Contracting Officer Brian Rosciszewski. This notice is for informational and planning purposes only and does not constitute a solicitation for proposals or a commitment to award a contract.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

S201--VANIHCS Window Cleaning - Engineering Service Amendment to provide answers to contractor questions

Solicitation # 36C25027Q0016

Solicitation 36C25027Q0016 is a firm-fixed-price contract issued by the Department of Veterans Affairs, Network Contracting Office 10, for comprehensive window washing services at the Fort Wayne and Marion, Indiana campuses. This set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) requires the contractor to provide all labor, equipment, and materials to perform maintenance twice annually. The scope of work includes cleaning exterior windows, frames, sills, and sashes, as well as maintaining insect and solar screens and cleaning exterior door glass. The contractor is also responsible for replacing any window components damaged during service. The contract structure consists of a base year with four optional extension years. Award will be granted to the responsible offeror providing the lowest reasonable price, subject to a preliminary review of documentation and an evaluation of past performance via PPIRS and FAPIS. The contractor must maintain a quality control program and provide certification of building completion to the Contracting Officer's Representative, who performs daily inspections. Payment is processed via Electronic Funds Transfer after the acceptance of services. Key compliance requirements include adherence to SDVOSB subcontracting limitations, personnel vetting and credentialing, and maintaining insurance coverage per FAR 52.228-5 and 52.228-6. Offers must be submitted electronically to the designated contract specialist by the specified deadline.

Janitorial Services

POSTED

about 12 hours ago

DEADLINE

H941--Chemical Hoods & HEPA PM

Solicitation # 36C25027Q0065

Solicitation 36C25027Q0065 is a request for quotation issued by the Department of Veterans Affairs Network Contracting Office 10 for the preventive maintenance, testing, and certification of chemical hoods and HEPA filters at the Richard L. Roudebush VA Medical Center in Indianapolis, Indiana. This procurement is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), and awardees must certify compliance with subcontracting limitations, ensuring no more than 50 percent of the contract value is paid to non-SDVOSB or non-VOSB firms. The scope of work includes quarterly prefilter service, annual HEPA service, diffuser cleaning, and detailed reporting for various systems, with a base period of performance from November 15, 2030, to November 14, 2031, and an additional option period through May 14, 2032. The government will evaluate offers based on technical rating, price, and past performance, reserving the right to accept other than the lowest offer. A mandatory site visit was required for offer submission. Key deliverables include a Quality Control Plan and safety plan within 10 business days of award, and a reconciled electronic inventory within 30 calendar days. The contractor must provide firm-fixed pricing for recurring services and optional HEPA filter replacements. All work must adhere to strict technical standards, with results clearly labeled as pass, fail, or restricted, and supported by raw readings and calibrated instrumentation data. Invoices are to be submitted in arrears through the VA-designated electronic process.

Environmental Consulting Services

POSTED

about 12 hours ago

DEADLINE

V301--539 - Fifth Floor Pharmacy Move Service Contract

Solicitation # 36C25027Q0106

The Cincinnati Veterans Administration Medical Center requires specialized relocation services to move its inpatient pharmacy from the fifth floor to the second floor, with the eighth floor serving as a backup depending on availability. This firm-fixed-price contract, with a projected period of performance from November 2026 to May 2027, involves the disassembly, packing, transport, and reassembly of medical equipment, workstations, and furniture. A critical component of the scope is the provision of controlled environment certification services for non-hazardous pharmacy IV hoods, including laminar flow bench certification, operational particle counts, air sampling, and smoke pattern digital recording. After a temporary period of two to four weeks, the contractor will be required to move all equipment back to its original location on the fifth floor. The contractor must provide all necessary labor, vehicles, and packing materials, including RAM-board for floor protection. Key requirements include the submission of a Certificate of Public Convenience and Necessity from the Ohio PUCO and liability insurance that covers the value of the relocated equipment and facility damages. Performance will be validated through a final walkthrough and functional inspection conducted by the COR and technical personnel within 72 business hours of the move. Security protocols strictly prohibit contractor access to the VA network or any patient and employee PII/PHI. The project requires a dedicated team including a site supervisor, movers, truck drivers, and room certification testers.

Used Household and Office Goods Moving

POSTED

about 12 hours ago

DEADLINE

Velocity Software License ProvisioningThis subcontract, managed by the Department of Veterans Affairs Network Contract Office 10, focuses on the provisioning of active software licenses and subscriptions for the Velocity Application. These licenses are intended for prime contractors working on VA healthcare facility projects, specifically to monitor and manage PIV card readers for access control at the Ann Arbor VA facility and various off-site locations. To ensure legitimate licensing and ongoing technical support, the contractor must maintain authorized provider or partner status for the Velocity software. The opportunity is categorized under NAICS code 541512, with a response deadline set for November 12, 2026.

Computer Systems Design Services

POSTED

DEADLINE

OEM Surgical Instrument Parts SupplierThis subcontract opportunity is for a supplier to provide genuine original equipment manufacturer replacement parts for surgical and clinical instrumentation. Supporting prime contractors on projects for the Department of Veterans Affairs Northeast Ohio Healthcare System, the selected provider must source and deliver OEM parts for various surgical tool brands. To ensure quality and compatibility, the supplier is required to hold valid OEM certification or authorization and must deliver the components directly to the prime contractor or the designated VA facility. The contract is designated as a total Small Business Set Aside under NAICS code 339112 and is managed by the Network Contract Office 10. Interested parties should note the tight response window, with the solicitation posted on November 9, 2026, and a response deadline of November 13, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Surgical Case Cart and Sterilization Container MaintenanceThis subcontract, titled Surgical Case Cart and Sterilization Container Maintenance, involves the repair and renewal of surgical transport and sterilization hardware for prime contractors supporting the Department of Veterans Affairs Northeast Ohio Healthcare System. The scope of work includes inspecting and repairing the mechanical components of surgical case carts and ensuring the structural integrity of sterilization containers. All activities must strictly adhere to infection-control standards and sterilization validation protocols to ensure the delivery of fully functional equipment. The opportunity is designated as a Total Small Business Set Aside under NAICS code 811210 and is managed by the Department of Veterans Affairs Network Contract Office 10. Interested parties should note the response deadline of November 13, 2026. The contract focuses on maintaining critical medical hardware to support healthcare operations within the specified region.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Specialized Surgical Instrumentation Maintenance (Micro/Power)This subcontract opportunity is for the provision of specialized maintenance and repair services for high-precision and powered surgical tools supporting prime contractors on Department of Veterans Affairs Northeast Ohio Healthcare System projects. The scope of work includes the servicing of laparoscopic instruments, scopes, laryngoscopy devices, large retractor systems, and power surgical instruments, as well as micro-instruments used in cardiac, vascular, ENT, and ophthalmic procedures. To ensure the delivery of certified functional tools, the contractor must hold OEM-specific certifications for all power tools and scopes. The project is designated as a total Small Business Set Aside under NAICS code 811210 and is managed by the Department of Veterans Affairs Network Contract Office 10. Interested parties should note the response deadline of November 13, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Surgical and Clinical Instrumentation Maintenance ServicesThis subcontract, titled Surgical and Clinical Instrumentation Maintenance Services, is a total small business set-aside issued by the Department of Veterans Affairs for the Northeast Ohio Healthcare System. The scope of work involves providing preventive maintenance, sharpening, repair, and renewal of general surgical and clinical instrumentation. To execute these services, the contractor will utilize a mobile repair laboratory for 80 percent of the workload on-site, with the remaining 20 percent handled at off-site facilities. The contractor is required to adhere to strict infection-control requirements and a 48-hour tray-list notification system. Key deliverables include the return of maintained and sharpened surgical instruments along with detailed quality assurance reports. The project falls under NAICS code 811210 and is managed by the Network Contract Office 10.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Surgical and Instrumentation Maintenance and Repair

Solicitation # 36C25027Q0105

The Department of Veterans Affairs is conducting market research to identify qualified businesses capable of providing surgical and clinical instrumentation maintenance and repair services for the VA Northeast Ohio Healthcare System. The scope of work includes on-site and off-site preventive maintenance, sharpening, repair, renewal, and authorized replacement for surgical instrumentation, case carts, and sterilization containers. These services will support the Louis Stokes Cleveland VA Medical Center and the Outpatient Surgery Center. The contractor is expected to provide weekly on-site services during normal operating hours, performing approximately 80 percent of the workload in a mobile laboratory and 20 percent at an off-site facility. Specialized maintenance is required for ophthalmic, cardiac, vascular, ENT micro-instruments, laparoscopic instruments, scopes, laryngoscopy devices, large retractor systems, and power surgical instruments. The anticipated period of performance is 12 months from the date of award. Key operational requirements include providing a tray maintenance list 48 hours in advance, delivering same-day quality assurance documentation, and using original equipment manufacturer parts for repairs. The contractor must adhere to standards set by the FDA, CMS, CDC, AAMI, AORN, APIC, and HSPA, as well as VA security and infection-control protocols. This effort is categorized under NAICS 811210, and the government is specifically interested in determining if two or more verified Service-Disabled Veteran-Owned Small Business (SDVOSB) or Veteran-Owned Small Business (VOSB) concerns can meet the requirements at fair and reasonable prices.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

J065--Velocity Software Licensing Follow On Contract | Base + 4 | Start: 1/1/2027

Solicitation # 36C25027Q0103

The Department of Veterans Affairs Network Contracting Office 10 is initiating a follow-on contract for Velocity Software Licensing to support the Ann Arbor VA Healthcare facility. This software is essential for monitoring and managing PIV card readers used for access control at the main facility and various off-site locations. The requirement is categorized under NAICS code 513210 for Software Publishers and is structured as a base year plus four option years, with a scheduled start date of January 1, 2027. This procurement is being processed as a notice of intent to sole-source the requirement to Hirsch Secure Inc. While this is not a formal solicitation for offers, responsible sources may submit capability statements, proposals, or quotations by November 12, 2026, provided they can offer clear and convincing evidence that competition would be advantageous to the government. All inquiries and responses are to be directed to the Contracting Officer, Elizabeth Koses.

Software Publishers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Hydrostatic and Axial Spring Rate Testing

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 12 hours ago

DEADLINE

Independent Testing and Quality Inspection

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

NDT Testing for Moog Flo Tork Components

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Sources Sought for Geotechnical Exploration for U.S. Army Corps of Engineers, St. Louis District

Solicitation # W912P927Z2401

W07V Endist St Louis

POSTED

about 12 hours ago

DEADLINE

NDT and Material Certification Services for Naval Flanges

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Supply Chain Traceability and Quality Certification

DLA Maritime - Portsmouth

POSTED

DEADLINE

Valve Pressure and Performance Testing

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Aerospace Component Inspection and Certification

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

NDT Inspection and Quality Certification Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Material Testing and Certification Services

DLA Maritime - Portsmouth

POSTED

DEADLINE

Aerospace Component Qualification and Testing

FA8203 Afsc Pzaab

POSTED

DEADLINE

Radiographic Testing and Certification for Special Emphasis Material

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS