Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN-RIVET

Active
SPEFA3-26-T-0337Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single PIN-RIVET item with part number HLT109AP6-7 and NSN 5320-LN-003-4897, quantity one unit, under solicitation SPEFA3-26-T-0337. Delivery is required within five days FOB destination, with zero variance allowed in quantity, and inspection and acceptance must occur at the destination. The item is designated as a critical application and must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA packaging guidelines, with palletization following RP001 requirements while ensuring the Unit of Issue and Quantity per Unit Pack match contract specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and critical attributes must be verified at Level VII or AQL 0.1. The shipment must be sent by the fastest traceable means, explicitly excluding parcel post, and delivered to the specified Navy facility in Jacksonville, Florida. The required delivery date is June 10, 2026, and the contract incorporates all applicable DoD technical, quality, and packaging directives applicable to non-manufacturers and manufacturers alike, with no shelf life limitation imposed.

General Info

One PIN-RIVET HLT109AP6-7 delivered by June 10, 2026, to Jacksonville, FL, zero tolerance, MIL-STD packaging, critical inspection.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

NAVAL AIR STATION, JACKSONVILLE, FL, 32212-0016, US

Set-Aside

NONE

Documents

(1)

SPEFA3-26-T-0337.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
JAMES GREEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN-RIVET
PIN-RIVET<(>,<)>
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
HI-SHEAR CORPORATION 73197 P/N HLT109AP6-7
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017745713 0001 EA 1.000
SPEFA3-26-T-0337
SECTION B
PR: 7017745713 PRLI: 0001 CONT’D
NSN/MATERIAL:5320LN0034897
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65886
FLEET READINESS CENTER SOUTHEAST
BLDG 101 NADEP N65886
NAVAL AIR STATION
JACKSONVILLE FL 32212-0016
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65886
FLEET READINESS CENTER SOUTHEAST
109 YORKTOWN AVE
AVIATION RETAIL STOCK NAS
JACKSONVILLE FL 32212-0103
US
M/F: (TCN) N658866156A001
RDD: 156
PROJ: 705 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0D DIST: 9B ADV: 24 FC: PS
Need Ship Date:00/00/0000 Original Required Delivery Date:06/10/2026
SPEFA3-26-T-0337 NSN/Part Number: 5320-LN-003-4897 Quantity: 1 EA Purchase Request: 7017745713QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
FLEX DUCT ASSEMBLY
Solicitation # SPEFA5-26-T-0976
The contract pertains to the procurement of a Flex Duct Assembly, identified by part number 126657-914 and NSN 2835-LL-NC0-4571, with a quantity of 25 units to be delivered FOB destination within 132 days from the order placement. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless explicitly overridden by contract specifications. Verification and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is to be packaged in accordance with ASTM D3951 but must fully comply with the more stringent DLA packaging requirements, including MIL-STD-129 labeling and RP001 palletization standards. Identification marking must adhere to MIL-STD-130N dated November 16, 2012, and the product has no shelf life restriction. The contract is issued under solicitation SPEFA5-26-T-0976 as a Total Small Business Set-Aside under NAICS code 488190, with a fixed unit price of $25 per unit and a total contract value of $625. Delivery is to be made to the Fleet Readiness Center DLA in Cherry Point, North Carolina, with inspection and acceptance occurring at the destination. The original required delivery date is August 4, 2026, and all packaging and marking must reflect the specified unit of issue and quantity per unit pack as outlined in the purchase order.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
ELBOW, TUBE TO HOSE
Solicitation # SPEFA5-26-T-0978
The contract is for two units of an elbow fitting designated part number 8891-8D, which connects tube to hose and is identified by NSN 4730-LN-003-5506. The supplier, Eaton Aeroquip LLC, must deliver the items FOB destination within five days of order placement, with no tolerance for quantity variance. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s packaging standards. No shelf life applies to this item. Delivery is required to the Fleet Readiness Center East at Cherry Point, North Carolina, and shipment must occur via the fastest traceable means—parcel post is prohibited. The contract references solicitation SPEFA5-26-T-0978, with a required delivery date of August 7, 2026, and a unit price of $2.00 per piece for a total value of $4.00. Government-use identifiers and contact information, including point of contact Larry Kemp, are provided for administrative purposes.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
CAP R/H
Solicitation # SPEFA5-26-T-0979
This contract pertains to the procurement of three units of item NSN 1560-LL-NC0-8715 with part number 212-030-241-16 manufactured by Bell Textron Inc, designated as a critical application item with no shelf life requirement. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards, and include compliance with MIL-STD-130N for identification marking of U.S. military property. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes not explicitly defined are treated as major with corresponding verification levels or AQLs. Packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA requirements, and all units must be marked and labeled in accordance with MIL-STD-129, palletized per RP001, and shipped as a single unit of issue. Delivery is FOB destination with a strict 43-day lead time from the contract award, and final inspection and acceptance occur at the destination site with no tolerance for quantity variance. The shipping address is Building 148, Bay C, Beachey Road, Cherry Point NC 28533-5040, while the parcel post address is PSC 8021, Cherry Point NC 28533-0021. The original required delivery date is October 20, 2026, and the contract unit price is $3.00 per unit for a total value of $9.00. The solicitation number is SPEFA5-26-T-0979, issued by the DLA Fleet Readiness Center with primary point of contact Larry Kemp, and the North American Industry Classification System code is 488190. Compliance with DoD unit of issue standards and accurate labeling per the provided DLA guidelines are mandatory for contract fulfillment.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
FILAMENT, ADDITIVE MANU
Solicitation # SPE8E5-26-T-3834
This contract is for the procurement of 46 units of filament for additive manufacturing printers, identified by NSN 9330-01-696-2752 and part number 355-23101 from Stratasys Inc, under solicitation SPE8E5-26-T-3834. The requirement is a total small business set-aside with a delivery deadline of 167 days from the award date, with a mandatory ship date of February 1, 2027, and an original required delivery date of November 24, 2026. The material must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically TQ requirement IP025, and if not hazardous, must meet ASTM D3951 standards—however, DLA requirements supersede ASTM. All packaging and labeling must conform to MIL-STD-129, and palletization must follow DLA Packaging Requirements RP001. The shipment is to be sent to the DLA Distribution Depot in Tinker AFB, Oklahoma, with transportation instructions governed by DLAD Proc Notes C19 and C20. The unit price is $46.00 per unit, with a total contract value of $2,116.00, and the unit of issue is each (EA).
DEPOT OKLAHOMA

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
STAIN STEEL 17-4PH CRS
Solicitation # SPEFA5-26-T-0977
The contract specifies the procurement of 1 foot of 17-4PH stainless steel in cold rolled, condition A condition, with dimensions of 0.100 inch thick by 36 inches wide by 120 inches long, manufactured in strict compliance with AMS5604 Revision J. The material must be accompanied by a Certificate of Quality Conformance and packed in a manner that prevents damage during transit, adhering to DLA packaging standards, including MIL-STD-129 for labeling and ASTM D3951 for general packaging, with DLA Master List requirements taking precedence. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero defects required unless otherwise defined, and attributes must be verified per specified levels. Physical identification and metallurgical certification are mandatory, with CDRL-METALSCERT required and referenced in the Technical Data Package under QAP 13873. The material has no shelf life, and delivery is FOB destination within five days of contract award, with no tolerance for underdelivery but up to ten percent overdelivery permitted. Inspection and acceptance occur at the destination, and shipment must be sent via traceable freight only, not parcel post, to the Fleet Readiness Center East in Cherry Point, NC. The procurement is identified by NSN 9515-LN-003-1701 and purchase request 7017745743, with an original required delivery date of August 7, 2026, and a designated contract officer contact at DLA.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
Federal
REPAIR PUMP-DC ELECT. MOTOR - HC144
Solicitation # 70Z03826QL0000184
The U.S. Coast Guard is soliciting quotations for the repair of three DC electric pump motors identified by National Stock Number 1650-99-379-1046 and part number MPEV3-011-8UK2C, manufactured by EATON LIMITED with CAGE code K4413. This is a Total Small Business Set-Aside under NAICS code 488190, restricting eligibility to qualified small businesses as defined by a $40 million size standard. The solicitation is issued as a Request for Quotation under FAR Subpart 12.201, with no formal written solicitation to be issued. The contract will be awarded as a firm-fixed price purchase order, and the government reserves the right to exercise an option to purchase up to five additional motors at the same unit price, exercisable within one year of award or another mutually agreed date, with identical delivery terms. All items must be fully traceable to the original equipment manufacturer through documented proof of authorized distribution, and each quotation must include a Certificate of Conformance in the format prescribed by FAR clause 52.246-15. No drawings, specifications, or schematics are available from the government, and contractors must rely solely on provided documentation and industry standards. Quotations must comply with specified shipping terms: only F.O.B. Destination or F.O.B. Origin are acceptable; Ex Works and all Incoterms 2020 terms—including DAP and FCA—are prohibited. The deadline for submission is August 12, 2026, at 4:00 p.m. Eastern Time, with email submissions preferred and sent to debra.w.heath@uscg.mil, clearly referencing solicitation number 70Z03826QL0000184 in the subject line. Additional requirements are outlined in accompanying attachments including the Statement of Work, Terms and Conditions, and Wage Determination 2015-5613 (CA). All quotations must be submitted by responsible sources and adhere strictly to the solicitation instructions, as failure to comply may result in disqualification. The performance location and point of contact are based at the Aviation Logistics Center in Elizabeth City, North Carolina.
Aviation Logistics Center (ALC)(00038)

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
LEVER, BREECHBLOCK, COCK
Solicitation # SPE7L4-26-T-5985
The contract involves the procurement of 17 units of a lever, breechblock, cocking component designated by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5985, with a delivery deadline of 145 days after contract award. This item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide proof of registration renders any offer ineligible. The technical data associated with this component is export-controlled under either ITAR or EAR, with strict limitations on dissemination to foreign persons or entities, even within the United States. Only contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit DLA authorization may access the technical data. Additionally, the item falls under demilitarization requirements for Category I munitions, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging must comply with DLA procurement standards, and government identification must be removed from any non-accepted supplies. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, and performance is designated for Cherry Point, North Carolina, under the oversight of the Department of Defense’s Combat Vehicles and Armament division.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-12PD
This contract pertains to the procurement of PIN-RIVET items identified by NSN 5320-01-623-5442 and part number HLT50YB-12-18 or ST3M759C6-18, with a total quantity of 23 units at a unit price of $23.00, resulting in a total contract value of $529.00. The items must be manufactured or sourced from approved vendors including SPS Technologies LLC, Huck International Inc, West Coast Aerospace Inc, Hi-Shear Corporation, Heartland Precision Fasteners Inc, Fastener Innovation Technology Inc, and The Boeing Company, all of which are listed with their respective DOD vendor identifiers. Manufacturing may require casting or forging processes, and if the contractor lacks the necessary tooling or technical expertise, they must submit a Casting and Forging Assistance Request to the Defense Logistics Agency. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be physically marked in accordance with RQ017 requirements. Inspection and acceptance occur at the origin, with sampling governed by MIL-STD-1916 or equivalent zero-based sampling plans, and all attributes must be verified using strict AQL standards: critical at 0.1, major at 1.0, minor at 4.0. Packaging must adhere to ASTM D3951 as supplemented by DLA’s Master List of Technical and Quality Requirements and MIL-STD-129 for labeling, with palletization following RP001 guidelines. Delivery is FOB origin, with a required delivery date of March 13, 2027, and a need ship date of January 31, 2027, under a 171-day performance window. The contract mandates zero variance in quantity and requires all documentation and labeling to reflect the DLA unit of issue and purchase unit as defined in official DLA resources. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
DUCT, EXHAUST, AIRCRA
Solicitation # SPE4A5-26-T-323S
This contract issued by the Defense Logistics Agency for a duct, exhaust, aircraft component with NSN 2840-01-499-0448 and part number 5116T08P02 specifies the procurement of exactly eight units under procurement request 7017739863, with delivery due in 171 days FOB origin and no variance allowed in quantity. The item must comply with stringent military standards including MIL-STD-130 for Item Unique Identification, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging, with specific preservation methods, container types, and palletization following DLA’s procurement requirements. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the item is subject to DFARS 252.211-7003 for covered defense information. Inspection and acceptance occur at origin using zero-defect sampling based on MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as defined. The delivered item must be shipped to DLA Distribution Jacksonville at the specified address with a required ship date of January 31, 2027, and original delivery deadline of April 16, 2028. The contract is governed by the DLA Master List of Technical and Quality Requirements applicable as of the solicitation issue date, and documentation for source approval is required.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SLEEVE, EXPANSION MA
Solicitation # SPE8E5-26-T-3767
The contract is for the procurement of 1,023 units of a SLEEVE, EXPANSION MA, identified by NSN 3460014986519 and part number FTS-4-0-3-8, under solicitation SPE8E5-26-T-3767, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required at the destination address in New Cumberland, Pennsylvania, with a 153-day delivery timeframe from the date of order, and the contract specifies FOB Destination terms. All items must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and labeling must strictly follow MIL-STD-129 for marking and 2D barcoding, with palletization governed by RP001 DLA Packaging Requirements for Procurement. The Unit of Issue is each (EA), with zero variance allowed in quantity, and inspection and acceptance occur at the destination point by the Government. The contract mandates compliance with multiple Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering cybersecurity (252.204-7012), hazardous materials labeling, employment eligibility, trafficking in persons, sustainable products, whistleblower protections, and restrictions on covered defense telecommunications equipment. Offerors must possess a valid Unique Entity Identifier and CAGE code, and are required to submit accurate representations of their size and socioeconomic status, including any joint venture affiliations. Invoicing must be submitted through Wide Area WorkFlow, and all hazardous materials must be documented with a complete list and corresponding Safety Data Sheets prior to award, with ongoing updates required if compositions change. The contract includes mandatory adherence to federal regulations on material safety, export control, and government information safeguarding, and prohibits the use of unauthorized contractors for telecommunications equipment. The original required delivery date is March 6, 2027, with a need ship date of January 18, 2027. Pricing for the 1,023 units is not explicitly stated in the CLIN, but award data indicates related line items sum to a total estimated value of $10,730.31, though this figure is derived from partial award records and may not represent the full contract value.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
CAP, FILTER
Solicitation # SPEFA3-26-T-0336
The contract solicitation SPEFA3-26-T-0336 issued by the DLA Fleet Readiness Center Southeast seeks the procurement of 10 CAP, FILTER units with NSN 1650LLFFXF347, to be delivered FOB destination to Jacksonville, Florida, within 84 days of order placement with a required delivery date of August 4, 2026. The item is designated as a critical application item with no shelf life requirement, and the contractor must comply with stringent quality and technical standards defined in the DLA Master List of Technical and Quality Requirements, which supersedes all other specifications including ASTM D3951 for packaging. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to ASTM D3951 and DLA Packaging Requirements RP001, with all items labeled and marked in strict accordance with MIL-STD-129, including barcoding and hazardous material labeling as per OSHA HazCom and DFARS 252.223-7001. Physical identification of bare items must meet RQ017 requirements. The contract applies a comprehensive set of federal and defense acquisition regulations including FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity compliance with NIST SP 800-171, prohibition on hexavalent chromium, restrictions on Chinese military company items, whistleblower rights, and subcontracting for commercial services. Offerors must provide a Unique Entity ID and certify business size, socioeconomic status, and compliance with the Buy American Act and Berry Amendment; affirmative responses trigger additional reporting obligations, particularly for covered defense telecommunications equipment. All deliveries must be made to the specified DLA Distribution Jacksonville facility, with invoicing exclusively through WAWF and no cash or paper payment methods permitted. The contract does not specify pricing, type of contract, or evaluation factors, and the contracting officer will determine these elements upon award. The point of contact for inquiries is Anthony Graham, and proposals must be submitted electronically via DIBBS by the deadline of August 12, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11ZV
The contract pertains to the procurement of 3 retaining rings with NSN 5325-01-517-3749 and part number M10HS155 from HEIL TRAILER INTERNATIONAL LLC, under solicitation SPE4A6-26-T-11ZV. Delivery is required FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The required delivery date is January 18, 2027, with an allowed delivery order of 171 days, and the ship date must occur no later than January 31, 2027. The delivery location is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must comply with DLAD Proc Note C19 and C20. The unit of issue is each, priced at $3.00 per unit, with total contract value of $9.00. All technical and quality provisions referenced via R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
BATTERY POWER SUPPL
Solicitation # SPE7L7-26-Q-2115
The contract specifies the procurement of a Battery Power Supply, shelf life Type 2 with a 12-month extendable lifespan, identified by NSN 6130-01-643-4896 and part number 923800, with four units ordered at one each under a Firm Fixed Price arrangement and zero variance tolerance. Each unit must comply with stringent packaging standards per MIL-STD-2073-1E, including specific preservation methods, materials, and unit containers, and must be marked in accordance with MIL-STD-129 with the special code ZZ for unique requirements. Palletization must meet DLA’s packaging requirements, and hazardous material handling guidelines under IP025 and RQ034 strictly prohibit intentional addition of mercury or mercury compounds, except for functional use in batteries, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise stated, and verification levels are predefined for critical, major, and minor attributes. Delivery is required within 60 days of award, with inspection and acceptance occurring at origin, and FOB terms are set at origin. Shipments must be sent via the fastest traceable means, excluding parcel post, to designated military vessel addresses using the VSM system, with unique TCN and RDD identifiers provided for each consignment. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, managed by the Defense Logistics Agency, with solicitations closed and awards processing underway for delivery dates ranging from July to August 2026.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168C
The contract is for one disk valve component identified by NSN 4820-01-221-0266 and part number A49678MEA-HF, supplied by Hunt Valve Company, Inc., under solicitation SPE7MC-26-T-168C. Delivery is required within 20 days to the destination FOB, specifically to USS BOXER LHD 4 at FPO AP 96661, with no tolerance for quantity variance. The item must comply with all DLA packaging requirements referenced in MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking standards, and must be palletized according to DLA guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, instruments, or sensor systems, and any portable devices containing mercury must be shock-proof and have a secondary containment barrier in accordance with NAVSEA 5100-003D. The supplier must adhere to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date. The contract specifies inspection and acceptance at the delivery point, and transportation logistics follow DLAD procedural notes C19 and C20. The required delivery date is August 3, 2026, and the point of contact is Paula Mcclary at the Defense Logistics Agency.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3521
This contract pertains to the procurement of 27 incandescent lamps under NSN 6240-01-678-0127 with a unit price of $27.00, resulting in a total price of $729.00. The items must be delivered within 79 days to the designated destination in Greensboro, North Carolina, with delivery terms set at FOB origin and no variance permitted in quantity. Inspection and acceptance both occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and DLA packaging standards, including specific preparation methods, materials, and unit container codes. Marking requirements adhere to MIL-STD-129 with no special marking applied, and palletization must meet DLA’s packaging guidelines. The product is subject to technical and quality requirements referenced from the DLA Master List, and the acquisition may involve covered defense information. The contract is issued under solicitation SPE8E7-26-T-3521, with a response deadline of August 17, 2026, and the original delivery requirement was February 13, 2027, despite an amended need ship date of August 5, 2026. The recipient is Industries of the Blind Inc, and transportation logistics are governed by DLA procedural notes C19 and C20. The NAICS code for this procurement is 335139, and the contracting agency is the Defense Logistics Agency under the Department of Defense.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4576
The contract is for one battery storage unit with NSN 6140-01-481-1199 under solicitation SPE7L7-26-T-4576, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item requires delivery within 20 days of award and is subject to strict export control regulations under either ITAR or EAR, meaning all technical data associated with the battery system is restricted and cannot be disclosed to foreign persons, including those located in the United States, without prior authorization from the Department of State or Department of Commerce. Access to this controlled technical data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and approved DLA questionnaires. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the NAICS code 335910 applies to the classification of this procurement. Performance is to be carried out at FPO, ZIP 96662, and the primary point of contact is Molly Teegarden, reachable via email and phone provided.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
FLUX
Solicitation # SPE8E5-26-T-3841
The contract pertains to the procurement of 10 units of FLUX with part number RPPEN2005N and NSN 3439-01-619-5990, supplied by two registered contractors, CAGE B5973 and CAGE 4QD64, with each unit measured as a single EA. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, incorporating referenced technical and quality standards through R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition class. Packaging must comply with DLA’s official procurement packaging standards, and all non-accepted supplies must have government identification removed prior to return. The product has no shelf life restriction. The purchase order specifies that only the named part number as defined herein qualifies as an exact product meeting government needs. Delivery is required within 20 days of award to Fort Sill, Oklahoma, 73503-0000. The solicitation number is SPE8E5-26-T-3841, issued under NAICS code 333992 by the Defense Logistics Agency, with solicitations open from August 5 to August 17, 2026, and primary point of contact is Ira Hedgepeth at ira.hedgepeth@dla.mil or 445-737-8335.
Welding and Soldering Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
BALLAST, LAMP
Solicitation # SPE8E7-26-T-3513
The contract covers the procurement of five ballast lamps identified by NSN 6250-01-688-8971 and part number B-1828, with a unit price of $5.00 per item and a total contract value of $25.00. Delivery is required within 132 days from the award date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container specifications. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization follows DLA packaging guidelines. The delivery address is Industries of the Blind Inc in Greensboro, NC, with the same location used for freight shipping. The contract references DLA’s Master List of Technical and Quality Requirements for compliance, and all documentation must align with specified DLA procedures for transportation and procurement. The solicitation number is SPE8E7-26-T-3513, issued by the Defense Logistics Agency, with a response deadline of August 17, 2026, and a required ship date of December 28, 2026. Primary point of contact is Kelly Mitchell, reachable via phone or email provided in the contract data.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4575
This contract specifies the procurement of a lead acid wet charged battery, part number 524MF, manufactured by East Penn Manufacturing Co. with CAGE code 04055, identified by NSN 6140-01-457-2602. The item is classified as a Type I shelf-life item with a non-extendable six-month lifespan and must comply with stringent packaging and labeling standards including MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating its shelf-life classification. The battery is designated as a hazardous material under DOT Class Corrosive, shipping name Battery, Wet, Filled with Acid, and must be transported via traceable means excluding parcel post. Mercury or mercury-containing compounds are prohibited except for functional uses in batteries, and portable devices containing mercury must be shock-proof with a secondary containment system as per NAVSEA 5100-003D. Inspections occur at destination with zero non-conformances required under sampling standards such as MIL-STD-1916 or ASQ H1331, and all packaging, marking, and shipping must adhere to DLA-specific hazardous material protocols. The delivery is FOB destination within 20 days of contract award, with no quantity variance permitted, and the sole quantity ordered is one unit. Technical and quality requirements are governed by the DLA Master List, and the item must be delivered to Fort McCoy, Wisconsin, with designated shipping and marking instructions. All data points including purchase request, contract number, and delivery details are tied to government-specific identifiers and compliance controls.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3482
This contract, issued by the Defense Logistics Agency under solicitation SPE8E7-26-T-3482, specifies the procurement of 764 incandescent lamps with NSN 6240-01-455-5542 and part number DS0522-105, sourced from approved suppliers Lockheed Martin Aeronautical Systems and Soderberg Manufacturing Company. The items are classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 labeling and RP001 DLA packaging standards, with hazardous material handling governed by TQ requirement IP025 if applicable under Fed-Std-313. The unit of issue is each (EA), with no variance allowed in quantity delivery. Delivery is FOB origin and must occur within 138 days, with the original delivery date set for January 20, 2027, and a need ship date of January 3, 2027. Inspection and acceptance occur at the destination. The end delivery point is Industries of the Blind Inc in Greensboro, NC, and transportation logistics must follow DLAD Proc Notes C19 and C20. All packaging and labeling must reflect DLA-specific requirements, including the correct Unit of Issue and Quantity per Unit Pack as defined in the contract. The solicitation opened on August 5, 2026, with responses due by August 17, 2026, and the contract is governed under NAICS code 335139 for miscellaneous electrical equipment and component manufacturing.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-26-T-3853
This contract specifies the procurement of a nonmetallic special shaped section, supplied on a 25-foot coil, with a required delivery quantity of 17 feet to be delivered within five days to Fort Hood, Texas. The item is identified by NSN 9390-01-179-4508 and purchase request number 7017745767, with a unit price of $17.00 per foot and a total price based on the contracted quantity. The product is classified as a critical application item, and its packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129. Plastic wrapping, cushioning, or dunnage is to be avoided whenever possible, and packaging must prevent distortion during shipping and storage. Shipment must be made via traceable freight methods, excluding parcel post, and directed to a designated warehouse facility at Fort Hood. The contract incorporates all technical and quality requirements referenced by R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is FOB origin with a 10% quantity variance allowed on the upper end and zero on the lower end, with inspection and acceptance occurring at the destination. The item is covered by defense information and subject to restrictions on government identification removal, and all markings and shipping documentation must align with specified codes and protocols.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
ADAPTER, PIPELINE
Solicitation # SPE8E6-26-T-4073
This contract pertains to the procurement of one adapter, pipeline, identified by NSN 4210-01-672-8075 and part number 1G0140, under solicitation SPE8E6-26-T-4073 issued by the Defense Logistics Agency. The item is to be delivered in a single unit with no variance allowed in quantity, and delivery is required within 20 days to Fort Bliss, Texas, FOB origin. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking required. The item must be shipped by traceable means, excluding parcel post, and palletization must follow applicable DLA standards. Transportation and delivery instructions specify the receiving activity as US Army 2-1 AD AWCF SSF, with a designated point of contact for inquiries. The contract incorporates technical and quality requirements from the DLA Master List, and covered defense information may apply, necessitating compliance with relevant security protocols. The acceptance and inspection point is at the destination, and the required delivery date is July 22, 2026. The product is governed under NAICS code 314999, and procurement is conducted using the DoD authorized unit of issue. Documentation for source approval is subject to RC001 requirements, and the removal of government identification from non-accepted supplies is mandated under RQ011. This solicitation does not provide a bidset, and all responsive offerors must adhere to the technical and quality standards referenced in the DLA Master List as of the solicitation's issue date. The contract is identified as a federal action with no set-aside designation. The supplier, Amerex Corporation DBA Getz, is expected to fulfill all packaging, marking, labeling, and delivery requirements precisely to ensure acceptance. The contract data indicates the solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and includes the government’s internal tracking codes for processing and distribution.
All Other Miscellaneous Textile Product Mills

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAMPLING, WATE
Solicitation # SPE7MC-26-T-168N
The contract pertains to the procurement of eight sampling valves for water, identified by NSN 4820-01-725-2063 and part number M3479-CAT, supplied by Derbyshire Marine Products, LLC under solicitation SPE7MC-26-T-168N. The requirement mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which takes precedence over all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity, and delivery must occur within 20 days of contract award, FOB origin. Inspection and acceptance occur at the destination. The product must be shipped traceably to the U.S. Coast Guard cutter ESCANABA at 4000 Coast Guard Blvd, Portsmouth VA 23703, with parcel post explicitly prohibited. Packaging must reflect the specified Quantity per Unit Pack and palletization standards per RP001. All items must be properly marked and labeled per government specifications, and the shipment must be coordinated with the provided TCN and project information. The required delivery date is June 18, 2026, and the contract is governed by DLA policies that control revisions for large acquisitions based on RFP issue dates, unless superseded by formal amendments. Point of contact for inquiries is Paula Mcclary at DLA, with additional government-only tracking codes and identifiers specified for internal logistics use.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
WEATHER STRIP
Solicitation # SPE8E6-26-T-4053
The contract specifies the procurement of 24 feet of weather strip, identified as a commercial off-the-shelf (COTS) item with part number X-1333BT-SINGLE from Trim-Lok Inc, and NSN 5640-01-592-4332. Delivery is required within 10 days under FOB origin terms, with a quantity tolerance of plus 10 percent and no minus allowance. Inspection and acceptance both occur at the destination, and the item must comply with applicable technical and quality requirements from the DLA Master List, which supersedes other standards such as ASTM D3951. Packaging must adhere to DLA requirements, including MIL-STD-129 labeling and palletization per RP001, with hazardous material handling governed by TQ requirement IP025 if applicable. The unit of issue is feet, with bulk packaging, and the delivery point is the U.S. Army facility at Fort Riley, Kansas. The contract is issued under solicitation SPE8E6-26-T-4053, with a response deadline of August 17, 2026, and a required delivery date of August 3, 2026. The Defense Logistics Agency is the acquiring organization, and the point of contact is Vincent Nader. The item is subject to Covered Defense Information requirements, and all packaging and marking must reflect the designated military shipping address, shipment reference RDD 555, and project identifier 9GU TP 2. Government-specific identifiers such as DIC A01 and ADV FC Z9 are included for administrative tracking. Transportation and shipping details follow DLA procedural notices C19 and C20, and the supply chain data indicates military distribution via the 0101 CS BN CO A DISTRIBUTION unit. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates strict compliance with all DLA procurement standards as they are defined at the time of solicitation issuance.
All Other Miscellaneous Textile Product Mills

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details