Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADED

Active
SPE4A0-26-T-4023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single straight-headed pin meeting technical standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance governed by DIN1444 Revision dated 03/01/2001 and associated geometric specifications. Inspection and sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance criteria require zero non-conformances in the sample lot unless otherwise stated. The item, identified by NSN 5315-12-384-4537, is to be delivered in a single unit within five days of contract award under FOB origin terms, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, using Packing Method 31, dry preservation, and no cushioning or dunnage. Marking shall follow MIL-STD-129 with no special marking codes applied, and palletization must meet DLA packaging requirements. The shipment is to be sent via the fastest traceable means, excluding parcel post, to the receiving point at Fort Carson, Colorado, under RDD 999/NMCS, with the designated supplier code W80BTZ and tracking ID W80BTZ61980099. The required delivery date is July 22, 2026, under Solicitation SPE4A0-26-T-4023, with procurement governed by DoD unit of issue standards and federal acquisition protocols.

General Info

Single pin NSN 5315-12-384-4537, DIN1444 compliant, zero defect acceptance, FOB origin, delivery to Fort Carson by July 22, 2026

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

4885 CHILES AVE, FORT CARSON, CO, 80913-4093, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A0-26-T-4023 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADED
PIN,STRAIGHT,HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD DIN1444 REVISION NR DTD 03/01/2001 PART PIECE NUMBER: DIN1444-B10H11X25-ST-GEOMET32
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017559851 0001 EA 1.000
NSN/MATERIAL:5315123844537
DELIVERY (IN DAYS):0005
SPE4A0-26-T-4023
SECTION B
PR: 7017559851 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
MARKFOR
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
M/F: (TCN) W80BTZ61980099
RDD: 999
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE4A0-26-T-4023
SECTION B
PR: 7017559851 PRLI: 0001 CONT’D

SPE4A0-26-T-4023 NSN/Part Number: 5315-12-384-4537 Quantity: 1 EA Purchase Request: 7017559851QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
Precision Metal Component Manufacturing
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
Wire Fabric Manufacturing and SupplyThe contract entails the manufacture and supply of 101 units of wire fabric that must fully comply with military specifications, including rigorous material traceability and quality assurance protocols aligned with DLA standards. All deliverables are required to meet strict compliance benchmarks to ensure suitability for defense applications, with emphasis on documentation, testing, and certification throughout the production lifecycle. The place of performance is designated as Tracy, California, with the DLA Dist San Joaquin office under the Department of Defense serving as the overseeing agency. This is a subcontract solicitation with a posted date of July 30, 2026, and a mandatory response deadline of August 10, 2026. The North American Industry Classification System code 332618 identifies the scope as other fabricated wire products. While no set-aside designation is specified, the requirement demands a capable supplier experienced in defense-grade manufacturing, with the capability to support traceability, inspection, and delivery timelines aligned with federal procurement expectations. The contract is accessible through the DIBBS system under solicitation reference SPE8E426T1938.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
Supply of Unspecified Defense Components (Multiple CLINs)The contract calls for the delivery of 62 units of unspecified defense components distributed across four distinct CLINs, with all items requiring strict adherence to military packaging specifications, hazardous materials handling protocols, and cybersecurity standards to ensure operational readiness and secure logistics. The work is subject to full compliance with federal defense procurement regulations, particularly those governing secure supply chain practices and environmental safety during transportation and storage. This is a total small business set-aside under the SBA program, exclusively reserved for small business concerns, with the NAICS code 332618 indicating manufacturing related to armament and related products. The contract was posted on July 30, 2026, with responses due by August 7, 2026, and performance is to be carried out at the designated location in New Cumberland, Pennsylvania, 17070-5002. The contracting activity falls under the Department of Defense, specifically the ASC Supplier Operating OEM Division, and the procurement is structured as a subcontract under the DIBBS system with the reference number SPE4A526T315B.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
Supply of Swept Wire, Faired P (NSN: 4010007690751)The contract solicits the supply of 30 units of military-grade Swept Wire, Faired P, identified by NSN 4010007690751, with strict adherence to defense specifications and full traceability requirements to ensure quality and compliance. This procurement is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing support for small defense contractors. The North American Industry Classification System code 332618 indicates the focus on other fabricated wire product manufacturing, aligning with specialized metal fabrication capabilities required for this component. The opportunity was posted on July 30, 2026, with a response deadline of August 7, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Performance is required at New Cumberland, Pennsylvania, with a zip code of 17070-5002. All bids must meet stringent defense standards, including material certification and supply chain transparency, and are to be submitted through the DIBBS platform via the provided link. The contract emphasizes reliability, precision manufacturing, and adherence to military-grade protocols to support critical defense applications.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
Supply of Straight Headle Pin (NSN 5315-01-725-1543)The contract calls for the manufacture or supply of one straight headle pin identified by National Stock Number 5315-01-725-1543, which must strictly adhere to all applicable military specifications regarding material, dimensions, performance, and testing. The item must be produced under a zero-defect quality assurance program, ensuring flawless workmanship and compliance with all required technical standards. Proper packaging and marking procedures must be followed to meet Department of Defense requirements, including labeling that ensures traceability and readiness for military logistics systems. Delivery is mandated to the Defense Logistics Agency (DLA) facility in Mechanicsburg, Pennsylvania, with the ZIP code 17050-2411 as the designated place of performance. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and the contract type is classified as a subcontract under NAICS code 332618. The contracting activity is the ASC Commodities Division under the Department of Defense, indicating a formal military procurement process requiring strict adherence to federal acquisition regulations and defense production standards.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
Precision Manufacturing of Helical Torsion SpringsThe contract requires the manufacture of 1,520 helical torsion springs designated by NSN 5360-00-752-1423, to be produced strictly in accordance with military drawings and the associated technical data package. Quality standards demand zero-defect outcomes, reflecting the critical nature of these components in defense applications, with strict adherence to hazardous material restrictions. Production must comply with all relevant military specifications to ensure reliability and safety in high-stakes operational environments. The contract is structured as a subcontract under the NAICS code 332618, issued by the Department of Defense through the LAND SUPPLY CHAIN agency. The place of performance is specified as Greensboro, North Carolina, with a zip code of 27409. The solicitation was posted on July 30, 2026, and responses are due by August 8, 2026. All work must be completed within this timeframe to meet program timelines and fulfill obligations to the defense supply chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCK
Solicitation # SPE4A6-26-T-10ZN
The contract pertains to the procurement of one pin and lock assembly identified by NSN 5315-01-686-7674 under solicitation SPE4A6-26-T-10ZN, with a required delivery within 90 days of contract award and a firm delivery date of November 6, 2026. The item is classified as a commercial item and is not subject to Item Unique Identification requirements per DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E and DLA packaging standards, including specific preservation methods, packaging materials, and unit container details, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA’s procurement packaging requirements, and delivery is FOB origin to the specified destination at the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols aligned with MIL-STD-1916 or comparable zero-based plans, and acceptance criteria follow established quality assurance levels unless otherwise stipulated. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The unit of issue is each, and the purchase request number is 7017696787.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SINGLE
Solicitation # SPE7M2-26-T-5832
This contract is for the procurement of a single-leg chain assembly identified by NSN 4010-01-453-9410 and part number 92692A550, with a quantity of 278 units to be delivered FOB origin within 168 days. The item is classified as a commercial item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection, and mercury restrictions. All packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with marking conforming to MIL-STD-129 and no special marking required. The delivery destination is Industries of the Blind Inc in Greensboro, NC, and inspection and acceptance occur at the destination. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs consistent with critical, major, or minor classifications. Mercury or mercury-containing compounds are strictly prohibited in the product, packaging, preservation, or marking, with limited exceptions for functional uses in batteries, instruments, or sensors as defined by NAVSEA, and any portable devices containing mercury must include a secondary containment barrier. The contract enforces a zero variance in quantity, with a need ship date of January 26, 2027, and the original delivery date set for March 27, 2027. Technical data availability and compliance with DLA unit of issue standards are required, and all documentation must align with the solicitation number SPE7M2-26-T-5832 and its associated revisions.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADED
Solicitation # SPE4A5-26-T-306A
The contract pertains to the procurement of 44 units of a PIN, SHOULDER, HEADED item identified by NSN 5315-01-616-9618, classified as a commercial off-the-shelf (COTS) product. Delivery is required within 170 days after delivery order issuance, with the final destination being the DLA Distribution Center at New Cumberland, Pennsylvania, under FOB Origin terms. The solicitation, issued under SPE4A5-26-T-306A, targets a simplified acquisition and may be awarded automatically based on low price technically acceptable criteria, with no formal evaluation factors or trade-off process specified. Packaging and marking must adhere to MIL-STD-129 and ASTM D3951, with palletization conforming to DLA’s RP001 requirements; Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced via RA001, which supersedes other standards when conflicts arise. Hazardous materials must be identified and documented with Safety Data Sheets as per 52.223-3 and DFARS 252.223-7001, while cybersecurity obligations include compliance with NIST SP 800-171, safeguarding of covered defense information, and reporting of cyber incidents. Contractors must maintain active SAM.gov registration, affirm small business status if applicable, and disclose any covered defense telecommunications equipment under 252.204-7016 and 7017. Payment must be processed electronically through WAWF, and subcontracting for commercial items is subject to DFARS 252.244-7999. The contract incorporates multiple FAR and DFARS clauses, including those related to equal opportunity, employment eligibility verification, trafficking in persons, sustainable products, accelerated payments to small business subcontractors, and unenforceability of unauthorized obligations, all amended with deviations effective as of February 2026. Proposals must be submitted electronically via the DIBBS portal by August 4, 2026, and no formal contract value can be determined due to missing unit pricing in Section B.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-314G
This contract specifies the procurement of a wire rope assembly with NSN 4010-01-480-7964, quantity of four units, to be delivered within five days of award. The item is designated as a critical application and must conform to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Manufacturing may require casting or forging with specialized tooling not held by the government, necessitating submission of a Casting and Forging Assistance Request for sourcing support. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging and palletization adhere to DLA Packaging Requirements, and delivery must be shipped by the fastest traceable means, prohibiting parcel post. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling under MIL-STD-1916 or comparable zero-based plans, unless otherwise stipulated. The item is to be delivered to Tobyhanna, Pennsylvania, with specific receiving and shipping addresses provided. The contract requires full compliance with all referenced technical documents and mandates that the supplier meet all identification, marking, and documentation criteria without exception.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-11BV
The contract is for the procurement of 10 straight-headed pins identified as a commercial off-the-shelf item with NSN 5315-01-695-4784 and part numbers 12HSSLAND and 98412A426 from Miller Products Company and McMaster-Carr Supply Co. Delivery is required within 20 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservative methods, materials, and unit container requirements, and labeling must follow MIL-STD-129. Palletization adheres to DLA packaging requirements, and shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post. The delivery address is in Virginia Beach, VA, with multiple designated locations for freight and parcel handling. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issuance date. The contract is issued under solicitation SPE4A6-26-T-11BV, with a required delivery date of June 17, 2026, and was posted for response by August 7, 2026. The item is categorized under NAICS 332618, procured by the Department of Defense's ASC Commodities Division, with Ericka Mosley listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIRE
Solicitation # SPE7M2-26-T-5803
This contract specifies the procurement of flexible wire rope under NSN 4010-00-575-6233, with a required quantity of 7,396 feet, to be delivered within 116 days to DLA Distribution San Diego. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and is designated as a primary Qualified Products List item, meaning only approved manufacturers may supply it. The product must conform to MIL-DTL-83420/4F and MIL-DTL-83420R specifications, with configuration control governed by engineering change proposals and variance requests. Strict prohibitions against mercury or mercury-containing compounds apply throughout the supply chain, including preservation, packaging, and marking, with only limited exceptions for specific functional devices like batteries or sensors as defined by NAVSEA. Packaging and preservation must adhere to MIL-STD-2073-1E, MIL-DTL-12000, and DLA packaging requirements, with all markings following MIL-STD-129. The delivery is FOB origin, with a 10 percent variance allowed in quantity, and inspection and acceptance occur at the destination. The contract mandates preservation methods and packaging materials designated as ZZ, with no specific cushioning or packaging materials detailed beyond compliance. Shipments must be palletized per DLA guidelines and delivered to the specified address in San Diego, California, with the original required delivery date set for April 23, 2027, though a need ship date of July 30, 2026 is indicated. The solicitation issued under SPE7M2-26-T-5803 has a response deadline of August 10, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332216
New
DIBBS
INSERTER, BEARING AN
Solicitation # SPE4A0-26-T-3969
The contract solicitation SPE4A0-26-T-3969 pertains to the procurement of a single unit of an inserter bearing part with NSN 5120-01-521-1302, valued at one dollar per unit, with two identical line items totaling a contract value of two dollars. Delivery is required within five days of order receipt, with a mandated delivery date of July 15, 2026, under FOB Origin terms, meaning title transfers at the contractor’s facility. Inspection and acceptance occur solely at the destination location in Virginia Beach, VA, with no variance permitted in quantity. Packaging must strictly adhere to MIL-STD-2073-1E and DLA Packaging Requirements RP001, including preservation methods designated as clean and dry using preservation material type 02, packaged in a moisture-resistant fiberboard box with glassine and laminated kraft cushioning, labeled with pack code U and marked per MIL-STD-129 without any special markings. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required per sample unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including requirements for configuration change management, removal of government identification from non-accepted supplies, and physical identification of bare items. The contractor must comply with all applicable Federal Acquisition Regulation clauses such as combating trafficking in persons, employment eligibility verification, sustainable products, safeguarding covered defense information, and cyber incident reporting, each incorporated with deviations or alternates as noted. Electronic invoicing is mandatory through WAWF, and all submissions must be made exclusively via the DLA Internet Bid Board System with a response deadline of July 28, 2026. The contractor is required to maintain a valid Unique Entity Identifier and CAGE code, and must represent size status and socioeconomic certifications as applicable, with additional disclosure obligations for entities providing covered defense telecommunications equipment or services. Shipping must be conducted via traceable freight methods, explicitly prohibiting parcel post, with freight delivery directed to a designated facility in Virginia Beach and parcel post delivery to a separate administrative address. The contract includes no option periods,
Saw Blade and Handtool Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A0-26-T-3824
The contract pertains to the procurement of three setscrews identified by NSN 5305-01-531-7710 under solicitation SPE4A0-26-T-3824, with a delivery requirement of five days after award. All supplies must comply with DLA Packaging Requirements for Procurement and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision governed by the solicitation issue date for simplified acquisitions. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. Inspection may use attribute or variable methods at the manufacturer’s discretion unless otherwise directed. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware, except in specified applications such as batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The action is managed by the Department of Defense’s Aviation Supply Chain ESOC, with performance taking place in Silverdale, WA, and point of contact Danita Davis, contacted via email or phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
PANEL, ELECTRICAL-EL
Solicitation # SPE4A0-26-T-4013
This contract is for a single electrical panel, part number 100H368G01 with NSN 5975-01-519-4819, to be delivered in one unit within five days of contract award under solicitation SPE4A0-26-T-4013, with a required delivery date of July 21, 2026. The item must be delivered FOB destination to the USS Scranton SSN 756 at FPO AP 96692, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 indicating Type I shelf-life, and palletization must meet DLA packaging requirements. The item has a non-extendable, Type I shelf life of 60 months and contains no mercury or mercury compounds in any form except as explicitly permitted for functional components like batteries or sensors, with additional containment requirements for portable devices. All preservation, packaging, and marking materials must be mercury-free. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation issuance or award date. The unit of issue is each, with no pricing detail provided in the statement.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A0-26-T-4019
The contract pertains to the supply of an Installation Kit for Electronic Equipment identified by NSN 5895-01-626-0556, with a quantity of four thousand units, to be delivered within five days after order placement. The solicitation is issued under number SPE4A0-26-T-4019 with a response deadline of July 31, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 334290. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item involves controlled technical data subject to export regulations under either ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, including foreign nationals within the United States, and imposes compliance with DFARS 252.225-7048. Access to this data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and approval processes. Compliance with cybersecurity standards is required at CMMC Level 2, either through self-assessment or certification by a C3PAO, along with adherence to DLA packaging standards, physical item marking, removal of government identification from non-accepted supplies, and proper handling of defense-related information. The contracting activity is the Department of Defense through the Aviation Supply Chain ESOC Buys office, with Danita Davis listed as the primary point of contact.
Other Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials and Safety Data Compliance
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Compliance Verification
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423820
New
DIBBS
Military-Compliant Packaging and Palletization
Farm and Garden Machinery and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing and Supply
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
DIBBS
Unable to decompose prime contract due to system unavailabilityThe contract titled "Unable to decompose prime contract due to system unavailability" was posted on July 30, 2026, with a response deadline of August 7, 2026, and is categorized as a subcontract under the Department of Defense's Aviation Supply Chain ESOC Buys organization. No solicitation number, NAICS code, set-aside information, or organizational type is available, and critical details such as the statement of work, CLINs, scope, and pricing cannot be accessed due to system limitations. The place of performance is listed as FPO with a zip code of 96310-7305, while the office address and point of contact information are incomplete. The only actionable reference is the UI link to the DIBBS platform for potential bidders to retrieve further information, though the system appears unable to support decomposing the underlying prime contract for sub-opportunity identification.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Machine Bolt (NSN: 5306015772297)The contract calls for the procurement and delivery of four machine bolts identified by the National Stock Number 5306015772297, aligned with federal specifications to ensure compatibility and reliability for military use. The contractor is responsible for all aspects of packaging, labeling, and shipment, adhering strictly to both military and Occupational Safety and Health Administration standards to guarantee safe handling and regulatory compliance throughout the supply chain. The solicitation, issued under the NAICS code 332999 for other fabricated metal product manufacturing, is managed by the Aviation Supply Chain ESOC Buys division of the Department of Defense and was posted on July 30, 2026, with a firm response deadline of August 7, 2026. The transaction is classified as a subcontract, and while no set-aside designation is specified, full compliance with the stated technical and procedural requirements is mandatory. The contractual obligations must be fulfilled without deviation, as failure to meet these standards will result in rejection of the deliverables and potential disqualification.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Self-Locking Hexagon Nut (NSN: 5310015489738)The contract entails the supply of a single self-locking hexagon nut identified by NSN 5310015489738, fully compliant with military specifications for performance, material, and dimensional tolerances. Full traceability of materials and manufacturing processes is required, along with rigorous adherence to packaging standards designed to preserve integrity during transport and storage. All hazardous materials documentation must be complete and accurately reflect composition, handling requirements, and regulatory compliance. The item is destined for performance at Fort Leonard Wood with a zip code of 65473-8947, and the solicitation is issued under the Department of Defense through the Aviation Supply Chain ESOC Buys organization. The contract type is listed as a subcontract, with a posted date of July 30, 2026, and a firm response deadline of August 7, 2026. The NAICS code 332722 indicates the supplier must operate within the fastener and hardware manufacturing sector, and all deliverables must align with defense procurement protocols without exception.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541611
New
DIBBS
Specialty Packaging and Barcoding ServicesThe contract requires specialized packaging, marking, and barcoding services aligned with military standards, specifically mandating the application of the special marking code '32', MIL-STD-129 barcoding, and the accurate inclusion of National Stock Numbers, part numbers, and quantities on all labels. These services are critical for ensuring full compliance with Department of Defense logistics and inventory requirements, enabling seamless tracking and identification of materiel throughout the supply chain. This is a subcontract opportunity issued under the NAICS code 541611 by the Aviation Supply Chain ESOC Buys office within the Department of Defense, with performance requirements centered at Hill Air Force Base, Utah, zip code 84056-5733. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, with all submissions expected to meet strict military compliance standards for labeling and documentation to support defense logistics operations.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details