This Solicitation opportunity from Department Of Defense was posted on July 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PLATE, IDENTIFICATIO

Closed

SPE8E9-26-T-3234Federal

Submission Closed08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

The Jefferson Parish Government is soliciting bids for solicitation number 296 to provide all labor, materials, and equipment necessary to fabricate and install one single-sided polystyrene monument style sign at Parc des Familles, located at 6101 Leo Kerner Parkway in Marrero, Louisiana. The scope of work includes site preparation, marking existing utilities, minor grading for drainage, and restoring the site to its original condition upon completion. The contractor must provide sign submittals and color samples for parish approval prior to ordering and is required to warrant all materials and workmanship for one year following final acceptance. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement for responsiveness is the submission of final insurance certificates complying with Jefferson Parish Resolution No. 136353 or No. 141125 within ten calendar days of the bid opening. Work must be performed on non-holiday weekdays between 7:00 am and 4:00 pm, and no activity may begin until the contractor receives a written Notice to Proceed or Purchase Order and provides a minimum twenty-four hour notice to the parish. The project is managed by Brent Griffin, and the exact placement of the sign will be determined in the field by the park supervisor.

Jefferson Parish Government

POSTED

DEADLINE

2709ITB - Citywide Banner Printing & Fabrication

Solicitation # 2709ITB

The City of Daytona Beach is soliciting bids under solicitation 2709ITB for the as-needed printing, fabrication, finishing, packaging, and delivery of various large-format signage, including vertical and horizontal pole banners, event banners, facility banners, and yard signs. This is a production and delivery only contract; installation, removal, permitting, and maintenance are specifically excluded. All vertical pole banners must be fabricated from heavy-duty vinyl with a minimum weight of 18 ounces and feature full-color double-sided printing and 3-inch pole pockets. Completed products must be delivered to the City of Daytona Beach Public Works facility at 950 Bellevue Ave. Bids must be submitted electronically via the OpenGov platform by November 19, 2026. The award will be granted to the lowest responsive and responsible bidder based on the combined total of all line item unit costs in the Base Bid pricing proposal. Qualified bidders must have maintained a successful operation for at least three years and possess the necessary organizational capacity and equipment. Submission requirements include a bid security deposit equal to 10 percent of the bid and a performance security bond equal to 100 percent of the contract price. The City provides a discretionary preference for local vendors and requires compliance with E-Verify and drug-free workplace certifications.

POSTED

DEADLINE

Solicitation # 26-8684

Collier County is establishing a pool of pre-qualified contractors through solicitation 26-8684 for the design, fabrication, installation, repair, and disposal of a wide array of interior and exterior signage. The scope includes building identification, wayfinding, regulatory, monument, ADA-compliant, and LED electronic message signs. All work must strictly adhere to the County's Brand Standards and Guidelines to ensure visual consistency. The contract term is two years with three optional one-year renewals. Once the pool is established, projects up to 500,000 dollars will be assigned via Requests for Quotes. Projects exceeding 15,000 dollars will be awarded to the lowest-priced responsive and responsible contractor, while those under 15,000 dollars may be assigned through a rotation process. Qualified proposers must possess a State of Florida Certified General Contractor License or a Specialty Contractor License for Signs and a valid Business Tax Receipt. Mandatory submission requirements include a Vendor Declaration Statement, Immigration Certification, and proof of E-Verify enrollment. Local preference is available for businesses based in Collier or Lee County. For projects exceeding 200,000 dollars, performance and payment bonds of 100 percent of the contract amount are required. The County maintains strict quality control, requiring electronic proofs for approval prior to fabrication and final inspection to ensure compliance with building codes and accessibility requirements. Payments are processed in accordance with the Local Government Prompt Payment Act.

Operations & Regulatory Management

POSTED

DEADLINE

Piney Woods Region, Lake O the Pines Park Signs

Solicitation # W9126G27QA002

Solicitation W9126G27QA002 is a total small business set-aside for the procurement of 187 custom aluminum signs for the USACE Lake O the Pines project in Jefferson, Texas. The requirement is a firm-fixed-price contract to provide signage for offices, boat ramps, and campgrounds. All signs must be fabricated in strict accordance with USACE Sign Program Manuals EP 310-1-6a and EP 310-1-6b, as well as the Corps Graphic Standards Manual EP 310-1-6. Key technical requirements include the use of specific aluminum substrates, Diamond Grade retroreflective sheeting where specified, and adherence to approved USACE colors and Helvetica typography. The government will award the contract to a responsible offeror based on best value, utilizing a GO/NO GO technical evaluation to ensure product specifications are met. Deliverables include the signs and required artwork proofs for approval prior to shipping. The revised delivery schedule is 30 to 45 business days following artwork and color match approval, with an estimated final delivery date of December 1, 2026. Shipping is FOB Destination and is the responsibility of the contractor. Offerors must submit their quotes electronically via the PIEE Solicitation Module by November 12, 2026, at 10:00 A.M. CST. Submissions must include a price volume, a technical volume detailing each sign and the estimated delivery timeframe, a completed vendor information sheet, and signed acknowledgments of all amendments. Payment will be processed electronically through Wide Area WorkFlow.

POSTED

DEADLINE

Miscellaneous SpecialtiesThis subcontract for Miscellaneous Specialties involves the supply and installation of project signage and fire extinguishers for the Wave Waterpark Restroom Remodel Project in Vista, California. The scope of work specifically requires the delivery and installation of ADA-compliant signage and fire extinguishers to support the prime contractors on site. The opportunity was posted on October 29, 2026, with a response deadline of November 17, 2026. This project is associated with the City of Vista and falls under NAICS code 339950.

POSTED

DEADLINE

Blank Cardboard License Plates

Solicitation # 6100066954

The Commonwealth of Pennsylvania, Department of Corrections, Huntingdon Correctional Industries, is soliciting bids for a contractor to provide an estimated 320,000 blank cardboard license plate outdoor signboards. The contract is structured for a two-year initial term with the option for three one-year renewals. The required materials must be white, water-resistant dense cardboard compatible with a Ryobi 580 Press, with specific dimensions of 12 by 6 inches and a thickness between 0.050 and 0.070 inches. All items must be delivered F.O.B. destination to the Huntingdon facility and packaged on skids. This is an electronic bid only, requiring vendors to be registered in the Pa Supplier Portal. A single award will be made to the lowest responsive and responsible bidder, though the agency reserves the right to award by line item. Bidders must provide physical samples within the required timeframe to avoid disqualification and must submit a State of Manufacture Chart per the Reciprocal Limitations Act. The contractor is responsible for all shipping costs and must comply with various state labor laws, including the Minimum Wage Act and the Worker Protections and Investment Certification. Acceptance of goods is subject to inspection by the Commonwealth, and the contractor is obligated to replace any defective materials within fifteen days of notification.

Department of Corrections

POSTED

DEADLINE

Electoral Material –Sign (Arrow)

Solicitation # ECGZ-RFP-2026-4379

The Office of the Chief Electoral Officer, known as Elections Canada, is soliciting proposals under contract ECGZ-RFP-2026-4379 for the production and supply of GE46 Electoral Material Arrow Signs. The contract period runs from the effective date until March 31, 2027, with a preferred final delivery date of January 6, 2027. The scope of work includes the provision of digital proofs and prototype proofs at no cost, followed by the final shipment of the signs. All materials must be new and delivered on non-returnable pallets measuring 48 inches wide by 42 inches deep, not exceeding 54 inches in height, and compatible with manual hydraulic pallet jacks. The selection process follows a three-step evaluation consisting of mandatory technical criteria, rated technical criteria, and a financial evaluation based on a combined estimated total price. Eligible bidders include Canadian suppliers, suppliers of applicable trading partners, and non-trading partners. Proposals must be submitted by November 12, 2026, and must include a technical proposal with delivery lead times, a financial proposal, and required attestations, including a fair price certification. Payment will be issued monthly for completed work. While there are no general security requirements, any materials identified as protected or classified must be safeguarded according to the PWGSC Industrial Security Manual.

Office of the Chief Electoral Officer (Elections)

POSTED

DEADLINE

Manufacturer of Photographic Focusing Cloth (NSN 6760-01-377-5709)This subcontract involves the manufacture and supply of 50 photographic focusing cloths under NSN 6760-01-377-5709 for prime contractors supporting DLA Troop Support. The contractor is required to adhere to the technical and quality specifications outlined in the DLA Master List RA001. All production must utilize textile manufacturing equipment and materials that comply with the Berry Amendment and the Buy American Act. The project falls under NAICS code 339950 and is associated with the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

PLATE, IDENTIFICATION

Solicitation # SPE8E6-27-T-0448

Solicitation SPE8E6-27-T-0448 is a federal procurement issued by DLA Troop Support, Construction and Equipment for the acquisition of 50 identification plates. The required items are identified as Parker-Hannifin Corporation part number 93247 and NSN 9905017340514. This is designated as a critical application item with no shelf life requirement. The delivery is set for 104 days after receipt of order, with an original required delivery date of October 20, 2027. Shipping is FOB Origin, with the final destination and inspection point located at DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129 and RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is subject to various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessment requirements, and prohibitions on hexavalent chromium. Quotations must be submitted via the DIBBS portal by November 9, 2026.

POSTED

DEADLINE

PLATE, IDENTIFICATION

Solicitation # SPE8E6-27-T-0445

Solicitation SPE8E6-27-T-0445 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 50 identification plates, identified by NSN 9905-01-734-0515. This material is designated as a critical application item and is associated with Parker-Hannifin Corporation part number 93345. The required delivery date is October 28, 2027, with a delivery period of 104 days after receipt of order. Inspection and acceptance will occur at the destination, with shipments directed to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to technical and quality requirements, including the DLA Master List, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Palletization must comply with RP001, and the item has no shelf life requirement. Key regulatory clauses include DFARS 252.225-7001 for the Buy American and Balance of Payments Program and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and must be submitted via the DLA Internet Bid Board System.

POSTED

DEADLINE

PLATE, IDENTIFICATION

Solicitation # SPE8E6-27-T-0447

Solicitation SPE8E6-27-T-0447 is a federal procurement issued by DLA Troop Support Construction and Equipment for the supply of 50 identification plates, specifically Parker-Hannifin Corporation part number 92747 (NSN 9905-01-734-0517). This item is designated as a critical application item. The required delivery date is October 21, 2027, with a delivery period of 104 days after the order. Delivery is FOB Destination, with the shipping and inspection points located at DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging and labeling must comply with MIL-STD-129 and RP001 for palletization. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the safeguarding of covered defense information. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0460

This solicitation, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment (Class IV), is for the procurement of 50 identification plates (NSN 9905-00-781-5731). The contractor is required to provide plates containing only the specific information detailed on the provided drawings, such as weight, dimensions, and national stock number, while leaving areas for serial numbers and manufacture dates to be completed by the end user. Delivery is required within five days after receipt of order, with the shipping destination located in Stockton, California, under FOB Origin terms. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for general packaging and MIL-STD-129 for marking and labeling, with DLA Master List requirements (RA001 and RP001) taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations are due by November 9, 2026, and must be submitted to the DLA office in Philadelphia.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days

AI Contract Overview

The contract pertains to the procurement of an identification plate with part number 745184-4 supplied by Hamilton Sundstrand Corporation, CAGE code 99167, under NSN 9905-01-672-4911. A total quantity of 63 units is required at a unit price of $63.00, with the total contract value reflecting this amount. Delivery is mandated to occur within 167 days after order placement, with FOB origin terms and zero variance allowed in quantity. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951, and packaging must adhere strictly to MIL-STD-129 labeling and RP001 DLA packaging guidelines. Each unit must be palletized per DLA specifications and accompanied by full documentation as required for source approval, including proper removal of government identification from non-accepted supplies. The delivery destination is the DLA Distribution Depot at Hill AFB, Utah, with transportation governed by specific DLAD procedural notes. The inspection and acceptance points are both at the destination, and the required ship date is January 18, 2027, while the original delivery deadline is March 22, 2027. The contract is issued under solicitation SPE8E9-26-T-3234 and falls under NAICS code 339950 for other miscellaneous manufacturing.

General Info

63 identification plates, part 745184-4, $63 each, deliver to Hill AFB by March 22, 2027, per DLA specs.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

339950 - Sign Manufacturing

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

RFQ SPE8E9-26-T-3234 for DLA Troop Support Construction & Equipment MRO

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 22

Solicitation

Response DeadlineAug 3

Deadline has passed

Submission Closed

08/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Office AddressUSA

Contacts

Matthew Kruc

contact@example.gov

+1 (555) 000-0000

Full Description

PLATE,IDENTIFICATIO
PLATE, IDENTIFICATION
Approved source: CAGE: 99167 HAMILTON SUNDSTRAND CORPORATION PART NUMBER: 745184-4 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
HAMILTON SUNDSTRAND CORPORATION 99167 P/N 745184-4
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585896 0001 EA 63.000
NSN/MATERIAL:9905016724911
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE8E9-26-T-3234
SECTION B
PR: 7017585896 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:01/18/2027 Original Required Delivery Date:03/22/2027
SPE8E9-26-T-3234 NSN/Part Number: 9905-01-672-4911 Quantity: 63 EA Purchase Request: 7017585896QTY: 63 Delivery: 167 days ADO