Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Plumbing and Piping Systems Installation

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238220
New
SLED
TDCJ - Estelle Unit 25 ton Air Handler to include installation.
Solicitation # IW260299
The Texas Department of Criminal Justice is soliciting bids for the procurement of a 25-ton air handler to be installed at the Estelle Unit, including delivery, offloading, removal of existing equipment, and full installation of the new unit. This solicitation, identified by number IW260299 and posted on July 31, 2026, is conducted under the authority of Texas Government Code 2166.003(B), which governs construction projects undertaken by the agency. Responses are due by August 18, 2026, at 9:00 PM Central Time, and the procurement is open to qualified vendors through the TX SmartBuy platform. The project will take place in Texas, with no specific city designated, and is managed by the Texas Department of Criminal Justice under its SLED classification. Libby Moore serves as the primary point of contact for this solicitation, reachable via email at Libby.Moore@tdcj.texas.gov or by phone at 936-437-3833. The air handler is essential for maintaining environmental conditions within the facility and must be installed in compliance with all applicable standards. Vendors are expected to handle all logistics including transportation, dismantling of the old unit, and proper disposal, as well as ensuring the new equipment is fully operational upon completion. No set-aside provisions are specified, and the contract will be awarded based on competitive bidding criteria. Further information and submission details can be accessed via the provided TX SmartBuy portal link.
Texas Department of Criminal Justice

POSTED

about 9 hours ago

DEADLINE

in 18 days
NAICS: 238220
New
Federal
H219--NEW - Repair Duct and Chilled Water Lines
Solicitation # 36C25726Q0769
The solicitation amendment for Repair Duct and Chilled Water Lines, under contract number 36C25726Q0769, is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for construction services under NAICS code 238220, administered by the Department of Veterans Affairs through Network Contracting Office 17 in San Antonio, Texas. The work involves repairing and reinsulating chilled water lines and HVAC ductwork at the South Texas Veterans Health Care System located at 7400 Merton Minter Blvd, San Antonio, TX 78229, with performance scheduled from August 10, 2026, through December 31, 2026. The task requires strict compliance with VA-specific infection control, life safety, and privacy protocols, including no access to Protected Health Information or government computer systems, mandatory TB testing, security background checks for VA contractor badges, and adherence to OSHA standards and VAAR provisions. All contractor personnel must have prior experience working within VA healthcare facilities and complete weekly Infection Control Safety training. The solicitation requires proposals to demonstrate technical capability through a detailed methodology for SOW completion, past performance on three to five similar projects with verifiable references, and competitive pricing, with technical and past performance factors weighted more heavily than price, indicating a best value trade-off evaluation under FAR 52.212-2. Proposals must be submitted by email to jose.campa@va.gov no later than August 10, 2026, at 10:00 AM CST, with a maximum file size of 25 MB, and must include all necessary certifications and representations, including compliance with VAAR 852.219-75 subcontracting limitations, which cap subcontracting to non-certified entities at 50% of the contract value. Payment will be issued electronically via EFT through Tungsten Network only, and all deliverables are considered U.S. Government property with unlimited rights. Special provisions include adherence to FAR 52.203-6 regarding payment disclosures, prohibition on using certain internal confidentiality agreements, mandatory compliance with Executive Order 14026 minimum wage requirements, and restrictions on foreign procurement and OFAC-sanctioned entities. The Government will conduct final inspection and acceptance at the worksite, with liquidated damages possible for breaches involving sensitive information, and the contract includes an optional
257-NETWORK Contract Office 17 (36C257)

POSTED

about 19 hours ago

DEADLINE

in 23 days
NAICS: 238220
New
Federal
SERVER ROOM MINI SPLIT REPLACEMENT FOR USCG BASE CHARLESTON
Solicitation # 70Z036-26Q-MINISPLT
The United States Coast Guard is soliciting quotes for the replacement of a server room mini split HVAC unit at USCG Base Charleston, located at 1050 Register St, North Charleston, SC 29405, under solicitation number 70Z036-26Q-MINISPLT. This is a 100% small business set aside with a NAICS code of 238220 and a size standard of $19 million, using a firm fixed-price contract awarded on a lowest price technically acceptable basis. All work must be performed at the specified location, and prospective bidders are strongly encouraged to schedule a site visit by contacting Cody Wood to accurately assess the scope and complexity of the job. Failure to conduct a site visit does not exempt bidders from the responsibility of accurately estimating costs and effort. The solicitation requires a detailed technical proposal demonstrating full understanding of the Statement of Work, along with a completed SF-1449 form, and a breakdown of labor and material costs including the vendor’s Unique Entity Identifier and Tax Identification Number. Quotes must be submitted via email to Jacqueline.L.Robinson@uscg.mil no later than 11:00 AM EST on August 26, 2026, and no telephone or mail submissions will be accepted. All questions regarding the solicitation must be submitted in writing by August 24, 2026, to the same email address, with responses posted publicly to ensure fairness and transparency. Bidders must have an active UEI registered in SAM.gov prior to submission. The Government reserves the right to reject any proposal deemed unreasonable, technically inadequate, or inconsistent with program requirements, and may decline to make an award if none meet standards. The contract incorporates FAR clauses including Buy American, Service Contract Act wage determinations, and provisions addressing diversity, equity, and inclusion, and requires full compliance with all terms outlined in the solicitation package.
Base Charleston

POSTED

about 19 hours ago

DEADLINE

in 25 days

AI Contract Overview

Show more

The contract involves the installation of sanitary, potable water, and drainage piping systems throughout a facility, ensuring proper plumbing infrastructure is established. It is classified under NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors. Issued by the Department of National Defence within the Government of Canada, the work will take place in locations across British Columbia and Nova Scotia. This subcontract opportunity was posted on June 15, 2026, with a response deadline set for June 30, 2026. Although some details such as solicitation number, set-aside status, and specific office addresses were not provided, the contract focuses on skilled installation services integral to the facility’s plumbing and piping systems. Interested parties are directed to access the official tender notice for further information through the provided Canada Buys portal link.

General Info

Installation of sanitary, potable water, and drainage piping for Canadian defense facilities, British Columbia, Nova Scotia.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of sanitary, potable water, and drainage piping systems throughout the facility.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 423810
New
International
Spare parts for Construction Engineering Equipment
Solicitation # W8486-270850/A
The Department of National Defence is seeking competitive bids for spare parts required for construction engineering equipment under solicitation W8486-270850/A, with a firm delivery deadline of November 1, 2026, to be split between 25 Canadian Forces Supply Depot in Montreal, Quebec, and 7 Canadian Forces Supply Depot in Edmonton, Alberta. The requirement encompasses ten distinct line items including radiator cores, air cleaner filter elements, track roller idler assemblies, retaining pins, cooling system pumps, hand-driven engine priming pumps, rim assemblies, and track shoes, all specified by military part numbers and National Stock Numbers, with the sole authorized manufacturer identified by CAGE code 11083. Bidders may propose equivalent or substitute products but must clearly state the brand, model, part number, and CAGE code. Offers must be submitted exclusively by email to the designated receiving address by August 4, 2026, at 2:00 PM EDT, and any proposals directed to the contracting authority directly or arriving after the deadline will be rejected regardless of the cause. All items must be packaged individually in compliance with Canadian Forces Packaging Specification D-LM-008-036/SF-000, with manufacturer names and part numbers clearly stamped or etched on each unit, and accompanied by a packing slip referencing the contract number, CRN, and PBN. Shipments exceeding 0.566 cubic meters or 15.88 kilograms must be palletized on standard 1.22 m x 1.02 m four-way forklift entry wood pallets conforming to ISPM 15 standards, at no cost to the Government. The evaluation basis is lowest evaluated price on an item-by-item basis, contingent upon strict compliance with mandatory technical criteria including correct part number and CAGE code; non-compliant offers will be disqualified. The contract is subject to inspection and acceptance by Canada, and the contractor is responsible for ensuring all goods are new, conform to the latest specifications, and meet quality standards recommended to be based on ISO 9001:2015. Delivery is required under DDP Incoterms 2020, and payment terms stipulate that undisputed invoices will be processed within 30 days after submission in approved form, following strict invoicing requirements that include financial codes, tax registration numbers, delivery details, and separate line items for taxes. The contractor must maintain
Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 541380
New
International
Water Sampling and Laboratory Testing Services
Solicitation # W6840-SPO-27-001-A
The Department of National Defence is seeking qualified contractors to provide comprehensive potable water sampling and laboratory testing services at Hylands Golf Course in Ottawa, Ontario, under solicitation W6840-SPO-27-001-A. The contract requires weekly sampling at designated locations, with sample frequency varying between 7 sites from November to March and 10 sites from April to October, all performed by an ISO/IEC 17025 accredited laboratory. Core analytical parameters include E. coli, total coliforms, and turbidity, with additional testing for residual chlorine or other parameters as directed by the Technical Authority. The Contractor must conduct an initial vulnerability assessment of the water system and surrounding risk environment to identify potential contamination sources and evaluate susceptibility, followed by a baseline chemical analysis to determine if further site-specific monitoring is necessary. A detailed site-specific monitoring plan must be developed and submitted, outlining recommended contaminants and frequencies. All deliverables—including certificates of analysis, field sampling summaries, chain-of-custody documentation, vulnerability assessment report, and baseline analysis report—must be provided in English only. Any adverse result that may impact health, safety, or compliance must be reported by telephone immediately and confirmed in writing within 24 hours, including sampling location, parameter exceeded, measured value, applicable standard, preliminary interpretation, and recommended actions. Optional analytical services for metals, pesticides, fuel-related VOCs, nutrients, PFAS, and other approved analytes may be activated only with written authorization from Canada. The Contractor is responsible for supplying all sampling equipment, preservatives, coolers, ice packs, labels, and chain-of-custody forms, and must ensure sample integrity through proper handling, storage, and transport in accordance with holding times and temperature requirements; any sample rendered invalid due to Contractor error must be re-collected and re-analyzed at no additional cost to Canada. The initial contract term runs from October 10, 2026, to October 9, 2028, with three option years available for extension, contingent on 30 days’ written notice. Payment is on a firm all-inclusive unit price basis in Canadian dollars, covering all costs including labor, travel, equipment, administration, and overhead, with applicable taxes shown separately on invoices. Invoices must be submitted monthly with full details including contract number, item description, quantity, unit price, and financial codes, and will be paid within 30 days of receipt if dispute-free. The Contractor must maintain complete financial and operational
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561110
New
International
TSPS – One (1) Procurement Specialist, Intermediate (Enfield Region - Nova Scotia).
Solicitation # W6381-27-0008
The Department of National Defence is seeking a qualified intermediate-level Procurement Specialist through the Task and Solutions Professional Services (TSPS) supply arrangement E60ZT-18TSPS, Tier 1, to support Repair and Overhaul contracts under the Director of Quality Assurance, the National Quality Assurance Authority. The position requires one individual with demonstrated expertise in supply chain activities, inventory control, and material management, to operate within the DQA Quality Management System and deliver 240 days of effort per year at the Enfield Region in Halifax, Nova Scotia. The incumbent must hold a Secret-level security clearance, which the successful contractor and assigned personnel must obtain prior to contract performance, in compliance with the PWGSC Contract Security Program. The contract runs for a three-year period from August 31, 2023, to August 31, 2026, with an estimated total value of $477,600. All work must align with Canada’s international trade agreements including CFTA, CPTPP, CETA, and the WTO Agreement on Government Procurement, and must adhere to the Security Requirements Check List in Annex C. Only suppliers currently authorized under the TSPS arrangement are eligible to respond, and proposals must be submitted to the Contracting Authority, Kingsley Knight Ohene-Djan, by the deadline of August 7, 2026. The Crown reserves the right to negotiate with any supplier and may choose not to award a contract despite receiving proposals. No option periods or renewal terms are specified, and while the basis of award is not explicitly stated, the nature of the procurement suggests a trade-off evaluation approach typical for professional services under the TSPS framework. There is no formal breakdown of pricing by line item, nor are packaging, inspection criteria, or invoicing procedures detailed in the documentation.
Office Administrative Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
International
TBIPS - Informatics Support for Strategic Analysis Toolset
Solicitation # W6369-26-X036
The Department of National Defence is seeking a team of up to six informatics professionals to provide technical support for the ongoing evolution of the Strategic Analysis Support Toolset, aimed at enhancing the Canadian Armed Forces’ force development capabilities. The team will include one Technology Architect level 3, one Application/Software Architect level 2, and four Programmer Analysts level 2, all tasked with integrating disparate departmental data and metadata into a unified Business Intelligence environment. Their work will focus on transforming raw data into actionable insights through custom data collection methods, analytical models, and tailored visualizations that directly support strategic decision-making and process development within force development. The project emphasizes dynamic data interaction, system integration, and the delivery of scalable intelligence tools that align with evolving operational requirements. The solicitation, titled TBIPS - Informatics Support for Strategic Analysis Toolset with reference number W6369-26-X036, was posted on July 10, 2026, with a response deadline of August 12, 2026. The work is under the Government of Canada’s federal procurement framework and will be performed across Canada. Tatyana Vasilchuk serves as the primary contracting authority and can be reached via email for inquiries. The procurement is open to qualified vendors capable of delivering specialized informatics expertise in a secure, government environment with a focus on agility, data interoperability, and mission-critical analytics to support national defense objectives.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 336120
New
International
Truck, Deisel, 4x4 Service Body and Crane
Solicitation # W8476-277177/A
The Department of National Defence is seeking to procure one diesel 4x4 truck equipped with a service body and crane for delivery to Canadian Forces Base Suffield in Alberta, with a requested delivery date 300 days after contract award. An option exists for a second unit to be delivered at another location within Canada. The solicitation, identified as W8476-277177/A, was posted on July 27, 2026, with offers due by August 6, 2026, and submissions must be sent exclusively via email to the designated government address. The requirement falls under NAICS code 336120 and is classified as a federal procurement with no set-aside provisions. All documentation may be submitted in either English or French. The contract includes mandatory compliance with Canadian regulations pertaining to packaging, marking, and dangerous goods, requiring adherence to ISPM 15 for wood materials, the Transportation of Dangerous Goods Act, the Hazardous Products Act, SAE standards for labeling and signage, and Incoterms 2020 DDP delivery terms. The contractor is responsible for unloading at the destination without federal assistance and must ensure all items are clearly marked with manufacturer details and bilingual warning labels. Technical specifications demand a fully functional service body with LED lighting, anti-skid surfaces, and compliance with the Motor Vehicle Safety Act and ISO 9001:2015 quality standards. The government retains sole authority for inspection and acceptance at the delivery point, and the contractor must provide test data, quality records, and access to facilities for verification. Pricing details for the base unit and optional items—including training, spare parts, tools, and technical documentation—are not finalized and will be determined during contract award. No security clearance is required, and there are no key personnel or organizational conflict of interest provisions specified. Offerors must submit proposals in four clearly delineated sections via email under 5 MB in size, and must attest to compliance with international sanctions, anti-forced labor requirements, and ethical conduct, with false certifications potentially leading to disqualification or contract termination. The contract contains no formal clauses referenced from the U.S. Federal Acquisition Regulation and instead follows Canadian government contracting norms, with no provision for U.S. entity identifiers such as UEI or CAGE codes, and no socioeconomic set-asides.
Heavy Duty Truck Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541618
New
International
Two (2) Senior Life Cycle Management Specialist
Solicitation # W8486-270813/A
The Department of National Defence is seeking to engage two Senior Life Cycle Management Specialists under Stream 5 of the Task and Solutions Professional Service Supply Arrangement, with a tender notice issued under file number W8486-270813/A. This procurement is restricted to pre-qualified suppliers listed under the TSPS Supply Arrangement E60ZT-18TSPS, and bids must be submitted by August 17, 2026. The contract is structured for an initial three-year term with an optional one-year extension, all under identical terms. Work is to be performed primarily at 101 Colonel By Drive in Ottawa, Ontario, within the National Capital Region, and all services must comply with Treasury Board policies regarding former public servants and security protocols, including a mandatory Secret security clearance for personnel. Bid documents will be distributed directly by the Contracting Authority to eligible suppliers and are not accessible through the CanadaBuys portal. Only suppliers that have successfully completed the pre-qualification process through PWGSC’s TSPS program are eligible to respond. Security requirements for this engagement include Secret-level clearance for individuals assigned to the project, though no document safeguarding level is specified. Bidders are required to provide detailed compliance information per Article 2.3 of Part 2 of the solicitation to meet federal staffing and ethical standards. The procurement is open to a defined list of pre-qualified firms, including major consulting and engineering firms such as Deloitte, CAE, Calian, ADGA, and others, all of whom have undergone prior vetting through the TSPS process. Inquiries must be directed exclusively to Kelsey Lawrence at the Department of National Defence, and the Crown reserves the right to negotiate with any or all bidders. The solicitation is issued under the NAICS code 541618 for other scientific and technical consulting services, and submissions may be in either English or French. The intent is to support lifecycle management functions critical to defence asset maintenance and sustainment through qualified professional resources.
Other Management Consulting Services

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 423860
New
International
Spare parts for construction engineering equipment
Solicitation # W8486-270941/A
The Department of National Defence is seeking bids for spare parts required for construction engineering equipment under solicitation number W8486-270941/A, with a deadline for submissions set for September 15, 2026. The items, totaling 36 distinct parts including fluid filter adapters, windshield wiper blades, electrical cable assemblies, brake calipers, hydraulic fittings, fuel injectors, hydraulic motors, switches, seals, and various connectors and shafts, must be delivered by December 31, 2026, to either the 25CFSD facility in Montreal, Quebec, or the 7CFSD facility in Edmonton, Alberta, with quantities distributed between the two locations. All bids must be submitted in Canadian dollars, inclusive of delivery and Canadian customs duties and excise taxes, but excluding applicable taxes, and must be sent electronically via email to the designated receiving address. Each part is identified by its GSIN, NSN, specific part number, and NSCM/CAGE code, with some items having identical part numbers but allocated to different delivery sites. Contractors proposing equivalent or substitute products must clearly specify the brand, model, or part number and corresponding NSCM/CAGE code. The Crown reserves the right to negotiate terms with suppliers, and bidders may request a debriefing within fifteen working days of receiving bid results. All documentation may be submitted in either English or French.
Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 335312
New
International
Motor, Alternating Current
Solicitation # W8482-275360/A
The Department of National Defence is seeking proposals for two line items of alternating current motors, part number A/365TD/47 Mawdsley, manufactured by COMPAIR CANADA INC with NCAGE code 36008 and GSIN 6105, for delivery to CFB Halifax and CFB Esquimalt in quantities of six and four units respectively. The solicitation, numbered W8482-275360/A, was posted on July 31, 2026, with responses due by August 13, 2026, and is governed by a Firm Fixed Price contract structure under a Lowest Price Technically Acceptable evaluation methodology, where technical compliance is a mandatory pass/fail requirement and award is determined solely by the lowest evaluated price among compliant offers. Bidders must offer the exact part number or provide a fully documented equivalent or substitute product with corresponding brand, model, and NCAGE information, and all submissions must be submitted through CPC Connect or via fax, with proposals including mandatory annexes such as the Offeror Declaration Form, Submission Details, and Submission Form. Delivery is required under DDP terms, meaning the contractor assumes all transportation, duties, and risks until the items are received at the designated locations, with inspections and acceptance performed by the Government at the destination sites. Packaging and marking must comply with Canadian Forces specification D-LM-008-001/SF-001 for Canadian contractors, or MIL-STD-2073 and MIL-STD-129 for U.S. contractors, while EU-based contractors must meet NATO TL8100-0100 standards, and all items must bear barcodes using UCC/EAN-128 symbology with appropriate application identifiers and human-readable text. Items must be new, fully compliant with technical requirements, and carry at least 75% of their authorized shelf life, with quality assurance requirements aligned to ISO 9001:2015 and supporting documentation provided with each shipment. Invoices must be submitted to the Maritime Forces Atlantic Accounts Payable office in Halifax in a machine-readable format, accompanied by applicable financial codes and certifications, and contractors must maintain complete records for seven years post-payment. The contract includes strict obligations related to conflict of interest, employment equity, international sanctions compliance, and the safeguarding of classified or protected material if applicable, with the contractor liable for subcontractor compliance and subject to government inspection
Motor and Generator Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541370
New
International
TBIPS - Geomatics Analyst for Mapping & Charting Establishment
Solicitation # W1786-26-X002
The Department of National Defence is seeking to award a single contract for the services of one Geomatics Analyst Level 2 under the Task-Based Informatics Professional Services (TBIPS) Supply Arrangement, exclusively to qualified Tier 1 holders operating in the National Capital Region. The role involves providing geomatics engineering, IT infrastructure support, and development of data applications and workflows to enable production and operational capabilities for the Mapping and Charting Establishment and broader Department of National Defence and Canadian Armed Forces. The contract is expected to commence on 31 August 2028 and span an estimated 480 days of effort. Only nineteen pre-qualified TBIPS holders have been invited to submit proposals, including major firms such as CGI, Deloitte, ESRI Canada, Stantec, and others. The position requires access to Controlled Goods and a Minimum Resource Security Clearance of Secret, with the contractor organization needing to undergo Designated Organization Screening. Although bidders are not required to hold security clearances at the time of submission, the selected individual must be eligible and obtain the required clearance prior to performance. The contract falls under multiple international trade agreements, ensuring open competition among eligible Canadian suppliers. Proposals must be submitted by 19:00 EDT on 17 August 2026, with all inquiries directed to the Contracting Authority, Valery Plourde. All documentation may be submitted in either official language, and bidders may request a debriefing within 15 working days of receiving award notification.
Surveying and Mapping (except Geophysical) Services

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 541512
New
International
TBIPS - I.11 Technology Architect – Level 3
Solicitation # W6369-26DE44
The Department of National Defence, through the Director Project Delivery Command and Control Infrastructure Portfolio, is seeking two senior Level III I.11 Technology Architects to provide expert technical guidance for the design and implementation of Electronic Protection/Detection systems within the National Capital Region, Ottawa. This requirement is governed under the Task-Based Informatics Professional Services (TBIPS) Supply Arrangement EN578-170432, Tier 1, and is restricted to pre-qualified holders of this arrangement. The contract has an estimated effort of 760 person-days with a performance period extending from the date of award through March 31, 2028. All personnel assigned to the contract must hold and maintain a Secret security clearance under the Custom SRCL W6369-26DE44, although bidders are not required to possess the clearance at the time of proposal submission. Compliance with the Contract Security Program of Public Services and Procurement Canada is mandatory for organizational and personnel screening. The work involves delivering secure, mission-critical architectural solutions to ensure interoperability and operational effectiveness of DND’s command and control infrastructure, with no incumbent currently occupying this role. Proposals must be submitted electronically to the Contracting Authority, Jodi Bell, via email by August 7, 2026, and may be submitted in either English or French. The solicitation does not include pricing details, evaluation factors, or specific inspection criteria beyond adherence to security and contractual compliance, and no formal contract type or payment mechanisms are specified in the available documentation.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details