Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Plumbing and Water Systems Commissioning

Active

State & Local

Response Deadline11/11/2026, 06:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Plumbing and Water Systems Commissioning at Miami University involves the verification of domestic water, sanitary sewer, and water-consuming systems. The selected contractor will work with prime contractors to verify the installation of plumbing fixtures and develop monitoring-based commissioning plans utilizing pressure gauges and water flow meters. All work must adhere to LEED v4 Water Efficiency standards, with final deliverables consisting of water usage profiles and plumbing system verification reports. The opportunity is categorized under NAICS code 541330 and was posted on October 27, 2026. Interested parties must submit their responses by the deadline of November 11, 2026, at 6:30 PM. This project is managed through the Ohio Facilities Construction Commission's qualifications-based selection process.

General Info

Plumbing and water systems commissioning at Miami University following LEED v4 standards.

Agency

Ohio → Miami University

NAICS

541330 - Engineering Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of MUN-100133.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MU - New Basketball & Volleyball Arena

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 11

Submission deadline

Response Deadline

11/11/2026, 06:30:00 PM UTCin 14 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyOhio → Miami University

ContactsNo contacts available

OfficeN/A

Organization / AgencyOhio → Miami University

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs verification of domestic water, sanitary sewer, and water-consuming systems for prime contractors on Miami University facility projects. Verifies installation of plumbing fixtures and develops monitoring-based commissioning plans using water flow meters and pressure gauges. Requires LEED v4 Water Efficiency standards. Delivers plumbing system verification reports and water usage profiles.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, to submit their responses and obtain further solicitation details.

Kiewit Infrastructure West Co.

POSTED

about 3 hours ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency across San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. This opportunity is targeted toward firms specializing in administrative management, engineering services, computer systems design, and public relations documentation. Interested parties must submit their responses by November 17, 2026. The project falls under several NAICS codes, including 541611, 541330, 541512, and 541820. Primary coordination for this solicitation is handled by Liz Jordan-Wettstein at Aanko Technologies Inc.

Aanko Technologies Inc.

POSTED

about 3 hours ago

DEADLINE

Structural Engineering Services (PE Certified)This subcontract for Structural Engineering Services supports prime contractors on projects for the La Habra Heights County Water District in Whittier, California. The scope of work involves performing structural calculations and anchoring designs specifically for 12-foot diameter vessels and valve tree supports. The selected provider is responsible for creating vessel-specific anchor bolt templates based on provided geotechnical reports. A critical requirement for this contract is that all deliverables, including calculations and templates, must be certified by a Professional Engineer registered in the state of California. Interested parties must submit their responses by November 25, 2026.

La Habra Heights County Water District

POSTED

about 3 hours ago

DEADLINE

Synthetic Environment Generation for AI TrainingThis subcontract for the U.S. Air Force focuses on Synthetic Environment Generation for AI Training, specifically providing high-fidelity synthetic imagery to prime contractors. The scope of work involves creating detailed 3D models of refueling aircraft and simulating various lighting and weather conditions to generate labeled ground-truth datasets. To execute these tasks, the contractor must utilize high-end 3D rendering engines such as Unity or Unreal Engine 5 and ensure strict compliance with DFARS 252.204-7012 security standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026. The final deliverables for this engagement consist of comprehensive labeled synthetic image and video datasets designed to enhance AI training capabilities.

POSTED

about 4 hours ago

DEADLINE

Advanced Thermal Management DesignThe Advanced Thermal Management Design subcontract is a U.S. Air Force project focused on the development of thermal packaging for laser systems. The selected contractor will be responsible for performing thermal modeling and CFD analysis, as well as the fabrication of liquid cooling loops and cold plates utilizing high-thermal-conductivity materials. The primary deliverables include functional thermal management prototypes and validated thermal analysis reports to support prime contractors. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. The solicitation was posted on October 28, 2026, with a response deadline set for November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

BSAC Facility Readiness ContractorThe BSAC Facility Readiness Contractor is a subcontract opportunity under the General Services Administration's PBS Office of Leasing, specifically supporting GSA warehouse lease projects in Kennebunkport, Maine. The primary objective of this contract is to perform critical technical upgrades and finalizations for prime contractors to ensure facilities achieve Beneficial Substantial Asset Completion. Key responsibilities include executing final facility tuning, installing seismic bracing, and implementing energy-efficient upgrades to align with government sustainability and seismic standards. The ultimate goal of the engagement is to secure final BSAC certification and formal government acceptance of the asset. Interested parties should note the response deadline of November 11, 2026.

Pbs Office Of Leasing

POSTED

about 4 hours ago

DEADLINE

Cleaning System Hardware DesignThe Cleaning System Hardware Design subcontract is a U.S. Navy project focused on the design and prototyping of mechanical delivery systems for TDR Tank Level Indicator projects. The selected contractor will be responsible for creating CAD models and developing specialized delivery mechanisms, such as ultrasonic systems or sprayers, specifically engineered for tank environments. To successfully execute the contract, the provider must possess professional CAD software and rapid prototyping equipment to produce final engineering drawings, 3D models, and a functional physical prototype. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 25, 2026. The project supports prime contractors within the U.S. Department of Defense to enhance the hardware capabilities of naval tank monitoring systems.

POSTED

about 4 hours ago

DEADLINE

Hypersonic Aerothermodynamics ConsultantThe Hypersonic Aerothermodynamics Consultant subcontract is a U.S. Air Force project focused on the computational modeling and simulation of non-oxygen based hypersonic ground test environments. The selected contractor will utilize CFD software such as OpenFOAM or ANSYS Fluent on HPC clusters to model gas dynamics and simulate sensor interactions with hypersonic flow fields. Key deliverables include the production of detailed simulation reports and the development of validation models for prime contractors. This opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Due to the nature of the defense work, the contractor must maintain strict ITAR and EAR compliance and adhere to NIST SP 800-171 and CMMC cybersecurity standards. Responses are due by November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

Cryogenic and Thermal Management EngineeringThis subcontract opportunity with the U.S. Air Force focuses on providing specialized thermal engineering analysis for high-enthalpy ground testing projects. The selected contractor will be responsible for the thermal modeling and design of vacuum jackets and cryogenic cooling interfaces intended to protect imagers from extreme heat environments. Technical execution requires proficiency in ANSYS or COMSOL to produce detailed thermal analysis reports and cooling system design specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

Secure Signal Routing Hardware DesignThe Secure Signal Routing Hardware Design subcontract focuses on the architectural design and schematic development of a secure Input-Output Unit for US Navy shipboard signal projects. The scope of work involves designing circuit topologies for signal isolation and the secure routing of Navigation and HM&E signals, utilizing EDA software to create conceptual diagrams for physical interfaces. Key deliverables include technical feasibility reports and comprehensive hardware design documents. This opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Due to the handling of Controlled Unclassified Information, contractors must maintain CMMC compliance. Interested parties must submit their responses by November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

Geotechnical Soil Analysis and Pavement RecommendationThis small business set-aside subcontract, issued by the Department of the Interior's Fish and Wildlife Service, requires geotechnical soil analysis and pavement recommendations for various project sites. The selected contractor will perform soil borings at roadway and parking locations using drill rigs and laboratory equipment to determine load-bearing capacity and soil composition. These efforts will culminate in a Geotechnical Engineering Report providing specific recommendations for pavement thickness and sub-base materials. To qualify for this engagement, the contractor must employ a licensed Professional Geologist or Professional Engineer. The opportunity is categorized under NAICS code 541330 and is specifically reserved for small businesses. Interested parties must submit their responses by November 10, 2026.

Fws Contracting Activity

POSTED

about 4 hours ago

DEADLINE

Civil Site Design for Parking and Access RoadsThis small business set-aside subcontract involves providing detailed civil site engineering design for U.S. Fish and Wildlife Service projects. The scope of work focuses on the layout, grading, and drainage of various infrastructure elements, including headquarters and overflow parking, maintenance building access roads, and gravel laydown areas. The selected contractor will be responsible for delivering signed and sealed engineering drawings, technical specifications, and design reports. Technical requirements include proficiency in AutoCAD/Civil 3D and hydraulic modeling software. Additionally, the performing engineer must hold a valid Minnesota Professional Engineer license. This opportunity is categorized under NAICS code 541330 and is managed by the Department of the Interior.

Fws Contracting Activity

POSTED

about 4 hours ago

DEADLINE

More opportunities from Ohio → Miami University

Same awarding agency

Fire Alarm and Smoke Evacuation CommissioningThis subcontract for Fire Alarm and Smoke Evacuation Commissioning involves providing specialized verification of life safety systems for prime contractors on Miami University facility projects. The scope of work focuses on verifying the integration of fire alarms with smoke evacuation fans and dampers, utilizing smoke generators and anemometers to conduct rigorous functional performance testing. All activities must strictly adhere to NFPA 92 standards and local fire code requirements. The selected provider is responsible for delivering comprehensive smoke evacuation functional test reports and detailed life safety verification logs. This opportunity is categorized under NAICS code 541330, with a response deadline of November 11, 2026.

Engineering Services

POSTED

DEADLINE

Building Envelope Commissioning (BECx)This subcontract for Building Envelope Commissioning at Miami University involves providing specialized testing and thermal analysis of building skins for prime contractors. The scope of work includes conducting thermal imaging to detect bridging or leakage and utilizing infrared cameras, blower door equipment, and smoke testers to verify air and water infiltration. All services must adhere to LEED v4 Enhanced Commissioning standards, with the final deliverables consisting of comprehensive building envelope thermal imaging and verification reports. The opportunity is categorized under NAICS code 541380 and was posted on October 27, 2026, with a response deadline of November 11, 2026. Interested parties can find further details through the Ohio Facilities Construction Commission project opportunities portal.

Testing Laboratories and Services

POSTED

DEADLINE

Electrical Systems Commissioning & Thermal ImagingThis subcontract for Electrical Systems Commissioning and Thermal Imaging involves performing verification and safety testing of low-voltage systems and electrical distribution for prime contractors on Miami University facility projects. The scope of work includes conducting thermal imaging of motors, panels, and switchgear, as well as verifying lighting levels through the use of power quality analyzers and IR thermography cameras. The selected provider must ensure full compliance with LEED v4 and NFPA 70E standards. Key deliverables for the project include verification logs, lighting level reports, and detailed thermal imaging reports. The solicitation was posted on October 27, 2026, with a response deadline of November 11, 2026.

Engineering Services

POSTED

DEADLINE

Mechanical Systems Commissioning (Cx)This subcontract for Mechanical Systems Commissioning at Miami University involves providing verification, testing, and balancing oversight for HVAC and mechanical systems. The selected contractor will work with prime contractors to verify setpoints, minimum outside air requirements, and sequences of operations. Key responsibilities include conducting operational checkouts and deficiency reporting utilizing specialized TAB equipment, airflow hoods, and manometers. All work must adhere to LEED v4 and Ohio Facilities Construction Manual standards. The contractor is required to deliver comprehensive performance reports and LEED-compliant commissioning forms. This opportunity is categorized under NAICS code 541330, with a response deadline set for November 11, 2026.

Engineering Services

POSTED

DEADLINE

MU - New Basketball & Volleyball Arena

Solicitation # MUN-100133

Miami University is soliciting a Commissioning Agent for the design, construction, and acceptance-phase commissioning of a new 256,000 gross square foot basketball and volleyball arena located at 200 S Fisher Drive in Oxford, Ohio. The project, identified as MUN-100133, aims for LEED Silver Certification and requires compliance with both Fundamental and Enhanced Commissioning credits for LEED v.4. The scope encompasses the verification and testing of major building systems, including HVAC, electrical, plumbing, and specialty low voltage systems, as well as the building envelope. Key deliverables include the development of a Facility Requirements and Operations and Maintenance Plan, monitoring-based commissioning plans for energy and water systems, and the provision of thermal imaging for electrical equipment and envelopes. The selected agent will provide services across multiple phases, from program verification and schematic design through post-construction, with a requirement for at least eight hours of on-site construction administration weekly. The project is supported by a design-build team featuring Turner Construction Company, MSA Design Consulting, and Heapy Engineering. Proposers must participate in the Encouraging Growth, Diversity and Equity program with a 5% participation goal. The anticipated professional services period begins in December 2026 and concludes in November 2028, following the substantial completion of work in September 2028. Final fees and scope will be negotiated after selection, with an estimated fee range of 0.1% to 0.15% of the 214.5 million dollar construction cost.

Engineering Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Professional Engineering Services (Structural & Electrical)

State University of New York (SUNY)

POSTED

DEADLINE

Elevator Design & Engineering Services

Cleveland State University

POSTED

DEADLINE

Electrical Engineering

Iron Mountain Public Schools

POSTED

DEADLINE

Structural & Civil Engineering

Iron Mountain Public Schools

POSTED

DEADLINE

Fire Protection Engineering

Iron Mountain Public Schools

POSTED

DEADLINE

Mechanical Engineering (HVAC Design)

Iron Mountain Public Schools

POSTED

DEADLINE

RF Engineering & Site Survey Services

POSTED

DEADLINE

RFP Forensic Structural Engineering Analysis

Solicitation # 2026.01

Warren County Public Schools

POSTED

DEADLINE

Zanesville/ Cambridge Campus Renovations

Solicitation # MAT-270001

Zane State College

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS