Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

PMS 300 Naval Surface Warfare Center - Carderock (NSWCCD) Acoustic Research Detachment (ARD) Research Vessel (R/V)

Active
N00024-26-R-2234Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy is conducting market research through a Request for Information and Sources Sought Notice to identify capable industry sources for the acquisition of one Research Vessel (R/V). This vessel will support the Naval Surface Warfare Center Carderock Division's Acoustic Research Detachment in Bayview, Idaho, on Lake Pend Oreille, primarily to replace the aging R/V Chinook. The vessel is intended for acoustic self-noise data collection and testing of towed sonar arrays, requiring specific capabilities including a maximum length of 80 feet, a maximum transit speed of 35 knots, and specialized acoustic treatments such as isolation mounts and a masker. The procurement is anticipated to be managed under the PMS 300 Service Craft and Boats Multi-Award Contract, with a notional award date in the third quarter of FY27. Key technical requirements include a 30,000 lb vertical deck payload, a 20,000 lb tow load, and a staffed computer lab. Interested parties must submit capability statements by October 2, 2026. While the current notice is for market research and does not guarantee a future solicitation, the Navy may consider setting aside the requirement for small businesses depending on the responses received.

General Info

US Navy seeks industry sources for a specialized acoustic research vessel by FY27.

Agency

Department Of Defense → Navsea HqView Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

DC

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsea Hq
Contacts2 people available
OfficeWASHINGTON NAVY YARD, DC, 20376-5000, USA
Organization / Agency
Department Of Defense → Navsea Hq
View Agency Profile
Office AddressWASHINGTON NAVY YARD, DC, 20376-5000, USA
Contacts

Full Description

Show more

PURPOSE:  


This combined Request for Information (RFI)/ Sources Sought Notice (SSN) is being issued by the U.S. Navy, Portfolio Acquisition Executive (PAE) Maritime code PMS 300, as market research to assess industry interest and identify capable sources through collecting capability statements for the acquisition of one (1) Research Vessel (R/V) for NSWC Carderock Acoustic Research Detachment (NSWCCD ARD).


The Navy is providing notional planning schedules and technical requirements to assist industry in developing responses and to solicit feedback of the requirement. Submission of any information in response to this announcement is purely voluntary.


This RFI/SSN does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future



SCOPE:


Research Vessel (R/V):


The anticipated plan for future procurement against this requirement is the PAE Maritime, Deputy PAE Expeditionary & Mine Warfare, PMS 300 Service Craft & Boats Multi-Award Contract (SCB MAC). Interested parties may respond following the guidance below in “RESPONSES & SUBMISSION OF INFORMATION” section.   


The notional schedule listed below is provided for planning purposes only. The descriptions and key characteristics of the potential service craft and boats are provided herein.  The Government is not obligated to pursue this schedule or a future solicitation because of this RFI/SSN.   


  1. Issue Industry RFI                   4rd QTR FY26
  2. Conduct Industry Day             1st QTR FY27
  3. Issue Draft RFP                       2nd QTR FY27
  4. Release Final RFP                  2nd QTR FY27
  5. Anticipated Award                  3rd QTR FY27


DESCRIPTIONS  


Acoustic self-noise data collection for the U.S. Navy is performed at the Naval Surface Warfare Center Carderock Division’s (NSWCCD) Acoustic Research Detachment (ARD) in Bayview, ID on Lake Pend Oreille (LPO). Such testing requires a vessel with a combination of size, speed, acoustic signature, and towing capability to accurately assess the performance of the towed arrays without interference from the host vessel. Primary mission of this R/V is to support testing on towed Sonar arrays and replace the aging R/V Chinook


Workboat Key Characteristics:  


Boat Type - Research /Vessel (R/V)


Notional Dimensions - 


80 ft maximum length


22’ beam maximum


~ 8’ molded depth; 6’ side height (actual)


~16’-5” bottom width


Propulsion - Marine Diesel propulsion plant (must meet requirements as specified in “Notional Speed”). Bow Thrusters for maneuverability on Lake Pend Oreille.


Notional Speed - 


Minimum speed: 2 kts


Cruising Speed: 12-15 kts


Max tow speed: 30 kts


Max transit speed: 35 kts


Crew - Crew Size: Four (4) personnel; 200ft allotment/room for staffed computer lab (12 personnel) vice passenger compartment. Galley and heat required, including hands-free Collection, Holding and Transfer (CHT) system for offboarding waste if possible.


Other Notional Characteristics - Required vertical deck payload 30,000 lbs. and 20,000 lbs. tow load for various towed arrays and on-deck cable reels of varying sizes and weights. Requires specialized acoustic treatments including items specified immediately below this table for NSWCCD ARD to complete test events and analysis.


  • General
    • Must be delivered direct to ARD’s facility in Bayview, ID.
    • Vessel must have a four-point mooring system for movement/transportation via overhead crane.
    • Computer Lab must have crane port via deckhead to enable placement and removal of systems within the Lab space.
  • Acoustic Treatments:
    • Single isolation mounts for all normally operating rotating or reciprocating machinery in the engine room, propulsion motor room, and auxiliary machinery spaces.
    • Local damping on foundations of the propulsion motors and several other key auxiliaries in the engine room and propulsion motor room.
    • Acoustic damping for power generators.
    • Masker (new or retrofit).
  • Electronics
    • LiDAR, RADAR, ADCP, USCG-compliant Marine Radio, Intercom and Depth Sounder.
    • Weather Station.
  • Generator
    • One (1) 40 KW, 120/208 volt 3-phase 60 hertz generator
    • One (1) 60 KW, 120/208 volt 3-phase 60 hertz generator
    • Backup redundancy in case of generator casualties
    • Electrical power filtering for Computer Lab electronics


RESPONSES & SUBMISSION OF INFORMATION:


Interested parties are invited to submit any information that may support the Navy’s market research efforts. If interested and capable to perform the above described efforts, please provide the following information on company letterhead: 1) Organization name, address, e-mail address, web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming (>20%) is anticipated to deliver technical and industrial capability, organizations should address the administrative and management structure of such arrangements.


Respondents are responsible for properly marking and clearly identifying proprietary information or trade secrets contained within their response.  The Government will not be liable for or suffer any consequential damages for any proprietary information not properly marked and clearly identified.  Information provided shall be treated as Business Sensitive and will not be shared outside of Government activities and agencies without the permission of the provider.  Do NOT provide classified information or use the marking “CONFIDENTIAL”.  


BASED ON THE RESPONSES TO THIS RFI/SSN THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION. In accordance with FAR 52.219-14, should the prospective contract be competed as a small business set aside, the prospective offeror would be required to perform 50% of the cost of manufacturing, to include industrial work, planning, engineering, and program management.  If you are a small business, include a description of your plan to meet the requirements within the capability statement portion of your submission. Defense and commercial contractors, including small businesses, veteran-owned businesses, service-disabled veteran-owned businesses, HUB Zone small businesses, and woman-owned small businesses are encouraged to monitor sam.gov for updates and to participate in any future solicitation, if one is issued.  


This RFI is the continuation of market research under Part 10 of the Federal Acquisition Regulation (FAR) and is not an RFP. 


Questions regarding this announcement shall be submitted in writing via e-mail to the Contract Specialist and Contracting Officer’s email addresses: jennifer.a.ede.civ@us.navy.mil and kirby.e.tucker.civ@navy.mil. Verbal questions will not be accepted. Questions shall not contain classified information. 


Interested parties who consider themselves qualified to perform the efforts described herein are invited to submit a response to this RFI/SSN by 1500 EDT on 02 October 2026.


Please follow the method below to submit your response:


1.         Upload and submit your response to the Safe Access File Exchange (SAFE) application (https://safe.apps.mil/my.policy).  Please follow the steps below:


A.        Proceed as a Guest user by clicking on "I do not have a CAC or this machine is not configured to read my CAC and I would like to access SAFE as a Guest User"


B.        Fill in all required fields


C.        Upload your response and grant file access to the following email addresses: jennifer.a.ede.civ@us.navy.mil, kirby.e.tucker.civ@navy.mil and thomas.s.anderson2.civ@us.navy.mil.


D.        Click the "Submit" button


E.         If you are having issues with the SAFE application, please request a drop off link from the following email addresses: jennifer.a.ede.civ@us.navy.mil and kirby.e.tucker.civ@navy.mil


DISCLOSURE:  


This is a RFI/SSN notice only. This is not a RFP, nor is a formal solicitation available at this time. This RFI is for voluntary feedback and informational planning purposes and not to be construed as a commitment by the Government to issue an RFP, contract, or order for any actual procurement of materials, machinery, supply or service. Unsolicited proposals submitted in response to this RFI will not be evaluated. The Government will not pay for any effort expended or any material provided in response to this announcement. All costs associated with responding to this RFI are solely at the responding parties' expense.  


This RFI/SSN is open to all interested parties both foreign and domestic.  Should an RFP for production be issued, boat designs which originate outside the U.S. can be permitted if the prime contractor can meet all domestic United States manufacturing and solicitation requirements.    


 Responses to this notice are not offers and will not be accepted by the Government to form a binding contract or agreement. The Government will not be obligated to pursue any particular acquisition alternative because of this RFI. Responses to the RFI will not be returned. Not responding to this RFI does not preclude participation in any future solicitation, if one is issued. Specific responses to the approaches will not disqualify or have an impact on participation and evaluation on future solicitations.

Similar Contracts

Same NAICS industry code

NAICS: 336612
New
Federal
SOLICITATION-U.S. Army West Point Harbor Q-Boat Ferry Maintenance
Solicitation # W911SD-26-Q-A118
The Mission and Installation Contracting Command at West Point, NY, is soliciting firm-fixed-price quotes for the on-condition cyclic maintenance, refit, and modernization of the US Army Vessel (USAV) Q-7860, a military passenger ferry. This requirement is 100 percent set aside for small businesses under NAICS code 336612. The scope of work includes drydocking, propulsion replacement, electrical surveys and repairs, engine room repairs, hull repair and painting, and final launch and stability trials. The primary objective is to extend the vessel's life cycle and ensure continued seaworthiness and passenger safety. The estimated period of performance is from September 15, 2026, through April 30, 2027. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis. Technical evaluation focuses on the submission of current and valid certifications and licenses in marine systems, electrical, corrosion, engines, fuel systems, and ABYC standards. Offerors must provide a comprehensive Quality Control Plan and a feasible Transit Plan for the vessel. The contractor will assume full custody and liability for the vessel upon taking possession at the West Point Dock. All payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system. The final deadline for submissions was extended to September 4, 2026.
W6QM Micc-West Point

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 336612
New
Federal
UNION ASSEMBLY
Solicitation # N0010426QFF45
This contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Navsea Hq

Same awarding agency

NAICS: 334515
New
Federal
AN/SPY-6(V) Production RFI/Sources Sought - Copy 2
Solicitation # N00024-25-R-55XX
The Department of Defense, specifically NAVSEA Headquarters, is conducting a sources-sought effort under solicitation number N00024-25-R-55XX related to the production of the AN/SPY-6(V) radar system. This effort is part of ongoing market research and not a new contract opportunity but connects to the existing contract opportunity N00024-25-R-5510. Interested companies seeking access to the unclassified bidder’s library must submit a signed Unclassified Terms of Use Agreement along with a DD2345 form. Various draft solicitation sections, including Sections B, C, L, and M, are available for download through NSERC or DoD Safe to companies that have completed the registration requirements. Industry is encouraged to review these materials and provide questions, comments, or proposed changes by a deadline of May 29, 2026. The Government has scheduled several key engagement opportunities, including a rescheduled Industry Day on December 15, 2025, and a series of 20-minute recommended in-person one-on-one sessions between May 11 and May 15, 2026, in Washington, DC. Attendance at these events is limited, typically allowing no more than three attendees for the Industry Day and up to ten for the one-on-one meetings, with company representatives required to register and submit attendee lists by set deadlines. Updates and Government responses to questions from earlier events and draft sections have been made accessible through secure portals. Point of contact for the effort includes Alexander Gosnell and Spencer Bryant, who handle inquiries, access requests, and scheduling of meetings. This process enables the Navy to gather critical industry feedback and refine the solicitation for the AN/SPY-6(V) production contract.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
Federal
AN/SPY-6(V) Production RFI/Sources Sought - Copy 1
Solicitation # N00024-25-R-551X
The U.S. Navy is conducting ongoing market research under solicitation number N00024-25-R-551X for the production of the AN/SPY-6(V) radar system. This sources-sought notice is connected to a prior solicitation (N00024-25-R-5510) and primarily aims to engage industry in providing feedback, questions, and comments on draft solicitation sections and requirements. Interested companies must submit signed Unclassified Terms of Use Agreements and associated documentation to gain access to the Unclassified bidder’s library, where critical documents such as Draft Sections B, C, L, and M are available. The government encourages active participation by inviting industry to review these draft materials and submit their input by May 29, 2026. Several opportunities for engagement have been scheduled, including industry days and one-on-one sessions. The Industry Day sessions have been rescheduled and modified multiple times due to furloughs and appropriations issues, with the most recent planned events including a two-hour session on December 15, 2025, and a series of 20-minute, in-person one-on-one meetings from May 11-15, 2026, in Washington, DC. Companies interested in attending the various sessions must notify the specified contacts by stated deadlines, providing attendee information and preferences. Throughout the process, the Navy has facilitated open communication via designated points of contact to ensure comprehensive industry input before finalizing contract requirements.
Engineering Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
Federal
AN/SPY-6(V) Production RFI/Sources Sought
Solicitation # N00024-25-R-5510
The Naval Sea Systems Command (NAVSEA), on behalf of the Program Executive Office Integrated Warfare Systems Above Water Sensors Directorate (PEO IWS 2.0), is conducting a Sources Sought Request for Information (RFI) for the production and support of the AN/SPY-6(V) family of radars. These radar variants include the Air and Missile Defense Radar (AMDR) for DDG-51 Flight III (AN/SPY-6(V)1), Backfit radar for DDG-51 Flight IIA (AN/SPY-6(V)4), Enterprise Air Surveillance Radar (EASR) Rotator (AN/SPY-6(V)2), and EASR Fixed Face (AN/SPY-6(V)3). The procurement is planned as a multi-award Indefinite Delivery Indefinite Quantity (IDIQ) contract with deliveries extending from FY27 through FY35, including potential Foreign Military Sales (FMS) volumes. The contract scope centers on producing these complex radar systems built on modular hardware line replaceable units (LRUs) under a build-to-print approach, where fabrication adheres strictly to detailed Technical Data Packages (TDPs), with allowances for obsolescence resolution and lifecycle cost reduction. The Government is seeking industry feedback to refine its acquisition strategy, including interest and capability to produce specific radar subsystems such as Digital Receiver/Exciter LRUs, Transmit/Receive Integrated Microwave Module LRUs, and Prime Power Equipment subsystems, as well as for a production integrator role that may oversee subsystem sources and final assembly integration. Key contractor attributes include demonstrated experience in complex radar systems manufacturing, compliance with technical data, teaming practices, and sustainment of deployed Navy hardware. The RFI invites capability statements and schedules one-on-one industry discussions to explore topics like contract type preferences, subsystem breakout viability, production lead times, and cost-reduction concepts. Access to classified and export-controlled information requires approved DD Form 2345 submissions and signed Terms of Use Agreements, with ultimate contract recipients needing eligibility for TOP SECRET/SCI clearance. The Government will host multiple industry engagement events, including virtual and in-person sessions, to facilitate dialogue through May 2026, ahead of a future formal solicitation. Responses are to be electronically submitted by May 29, 2026, via designated contracting personnel email addresses. This RFI does not constitute a contract or commitment but serves as market research to inform procurement decisions for this critical naval radar program.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
Multiple Ship Sustainment Partnership (MSSP) Single Award Indefinite Delivery Indefinite Quantity (SA-IDIQ) Contracts for Fleet Maintenance Availabilities and Incremental Selected Restricted Availabilities on DDG-51 Class Ships Homeported in Norfolk, VA
Solicitation # N0002426R4439
The Portfolio Acquisition Executive Maritime is soliciting Single Award Indefinite Delivery Indefinite Quantity contracts under solicitation N00024-26-R-4439 to provide Fleet Maintenance Availabilities and Incremental Selected Restricted Availabilities for DDG-51 Class ships homeported in Norfolk, Virginia. These Fixed Price with Award Fees contracts are divided into Facilitized and Non-Facilitized Lots. The Facilitized Lot, which will be solicited on a full and open basis with up to three awards, covers both Fleet Maintenance Availabilities at government facilities and ISRAs at contractor-provided facilities. The Non-Facilitized Lot is a Small Business Set Aside for Fleet Maintenance Availabilities performed at government facilities, with up to three intended awards. Each contract will feature three one-year ordering periods. The scope of work includes comprehensive coordination, planning, and preparation, such as inter-availability preparation and administration, engineering and design support, inspections, and material procurement. To be eligible for award, contractors must possess a Tier 2 NAVSEA Master Ship Repair Agreement and demonstrate Cybersecurity Maturity Model Certification. Evaluation factors include past performance on ISRAs or maintenance availabilities exceeding 70 days within the last three years, workforce capacity, and the availability of dedicated pier space for DDG-51 Class vessels. The procurement aims to utilize a pre-priced task menu to improve fleet readiness, maintenance responsiveness, and industrial base stability.
Ship Building and Repairing

POSTED

6 days ago

DEADLINE

in 11 days
View Details
NAICS: 336611
Federal
USS MAKIN ISLAND (LHD 8) FY28 Docking Selected Restricted Availability (DSRA) Pre-Solicitation
Solicitation # N0002426R4421
The Department of the Navy, through the Naval Sea Systems Command (NAVSEA), intends to award a firm-fixed-price supply contract for the FY28 Docking Selected Restricted Availability (DSRA) of the USS MAKIN ISLAND (LHD 8). This comprehensive maintenance and modernization effort is scheduled to occur over approximately 19 months, beginning in November 2027 and concluding in June 2029. The primary objective is to return the ship to the fleet in a mission-ready condition, ensuring a satisfactory state of readiness until the next scheduled depot availability. Due to the duration of the project exceeding 18 months, the Navy will compete the acquisition on a coast-wide basis for the West Coast rather than limiting it to the ship's homeport. The scope of work encompasses extensive labor, supervision, production, and quality assurance, including structural welding, cabling, piping, electrical, and ventilation work. Key maintenance areas include the hull structure, propulsion and electric plants, auxiliary systems, and armament. The successful contractor must provide a resource-loaded integrated production schedule and possess a NAVSEA Tier 1 Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR). Additionally, the contractor must have access to a dry-dock and pier capable of accommodating the LHD 8. The government anticipates awarding the contract around March 2027, with the formal solicitation expected to be released via PIEE and SAM.gov in August 2026.
Ship Building and Repairing

POSTED

9 days ago

DEADLINE

in 6 days
View Details