Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Polypropylene Barrier Wall Installation

Active

State & Local

Response Deadline08/14/2026, 05:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation of prefabricated polypropylene modular barrier wall systems along state highways within KYTC Districts D11 and D12, encompassing all phases of work including site preparation, anchoring, precise alignment, and full compliance with Kentucky transportation safety regulations. The work requires adherence to state-mandated standards to ensure structural integrity, durability, and long-term performance under high-traffic and environmental conditions. All systems must be installed according to engineered specifications to maintain highway safety and minimize maintenance needs over time. The solicitation is classified as a subcontract with a response deadline of August 14, 2026, and was posted on July 24, 2026. The NAICS code 237310 reflects its classification under Highway, Street, and Bridge Construction, indicating the project is part of broader infrastructure improvement efforts. Performance will occur across multiple locations within the designated districts, with no specific city designated for performance, suggesting scope spans rural and urban corridors under KYTC’s Division of Maintenance oversight. All interested parties must submit proposals through the official KYTC Advantage4 portal by the stated deadline.

General Info

Install prefabricated polypropylene barrier walls on KYTC Districts D11 and D12 highways by August 14, 2026.

Agency

Kentucky → KYTC-Div of MaintenanceView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Other, KY, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:30:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyKentucky → KYTC-Div of Maintenance

ContactsNo contacts available

OfficeN/A

Organization / Agency

Kentucky → KYTC-Div of Maintenance

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of prefabricated polypropylene modular barrier wall systems along highways in KYTC Districts D11 and D12, including site preparation, anchoring, alignment, and compliance with state transportation safety standards.

Similar Contracts

Same NAICS industry code

Fleet Fast EV Charging - ConstructionThe Port of Seattle’s Aviation Project Management Group is forecasting a construction contract for fast EV charging infrastructure, targeting entities capable of delivering turnkey solutions for electric vehicle charging systems. The solicitation is classified under NAICS code 237310, which pertains to electrical and other construction work, indicating that the project will involve the physical installation and integration of high-capacity charging equipment at aviation-related facilities. The work is expected to occur within the Port of Seattle jurisdiction, though the exact locations are not specified, suggesting multiple potential sites across airport properties. Angela Peterson serves as the primary point of contact for inquiries, with Katie Techa listed as the project manager, both reachable through official Port of Seattle communication channels. No set-aside provisions or solicitation number are currently available, as this is a pre-solicitation forecast posted on July 25, 2026, intended to provide market awareness and allow potential vendors to prepare for the upcoming formal procurement. Interested parties should monitor the provided UI link for future posting of the full solicitation, which will include detailed specifications, evaluation criteria, and submission requirements.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will comprehensively reconfigure the entry and exit drives along 19th Ave W, demolish the remaining slab of the Downie Building (C-14), and transform the footprint into a mix of new parking spaces and green areas designed as pollinator habitats, with potential integration of a stormwater treatment facility. Existing pavement in deteriorated condition will be milled and overlaid, while stormwater infrastructure will be entirely replaced and expanded to divert runoff from combined sewer lines to dedicated storm lines, including water quality treatment on qualifying surfaces. A new irrigation system will support the landscaped areas, and landscaping will also be installed in the rebuilt median within the entry drive. Electric vehicle charging stations will be incorporated into the new parking zone. The project will enhance multimodal access by adding a protected two-way bike lane connecting the terminal to the West Wall bike path, improving pedestrian pathways to the intersection of 21st Ave W and W Emerson Pl, and linking directly to the King County Metro bus stop. Lighting will be upgraded throughout the new parking area and pedestrian corridors, and wayfinding signage will be installed to guide cyclists and pedestrians. All improvements are intended to modernize the terminal’s entry experience, support sustainable transportation, and reduce environmental impact through better stormwater management and habitat creation. The project is being managed by the Port of Seattle through its Waterfront Project Management team, with primary contact information publicly available for inquiries and coordination.

Waterfront Project Management

POSTED

about 7 hours ago

DEADLINE

Asphalt Paving & Striping Portwide Unit Price 2026The contract encompasses a wide range of pavement and infrastructure maintenance activities to be performed across multiple sites within the Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. Work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, removal and disposal of grinding spoils, stripping and removal of existing pavement markings, surface preparation for new striping, stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, lifting and leveling of concrete sidewalks, and upgrades to road drainage systems, which may require obtaining permits. All tasks are to be executed under a unit price structure, with pricing based on predefined line items for each service. This solicitation, titled Asphalt Paving & Striping Portwide Unit Price 2026, is a forecast under NAICS code 237310 and is managed by the Port of Seattle through its Port Construction Services division. Primary point of contact is Heather Bowden, with Lesley Miles serving as Project Manager, both reachable via official Port of Seattle contact information. The contract does not specify a solicitation number or set-aside type, and performance locations span the Port’s expansive operational footprint without a single designated address. All work must comply with Port standards and procedures, and contractors are expected to coordinate logistics, permitting, and site-specific requirements across distributed locations.

Port Construction Services

POSTED

about 7 hours ago

DEADLINE

Paving and Asphalt ConstructionThe contract is for the installation of asphalt and concrete paving services including roads, access paths, and site surfacing under a total small business set-aside, designated under NAICS code 237310. It is structured as a subcontract and issued by the Department of Defense through the W071 Endist Portland office, with performance required in Portland, Oregon, 97204. The opportunity was posted on July 25, 2026, and responses must be submitted by August 5, 2026, at 10:00 PM Eastern Time. The requirement is exclusively available to small businesses as defined by the Small Business Administration, ensuring participation is limited to eligible small business concerns. The scope focuses on durable, high-quality pavement installation to support infrastructure needs at the designated location.

W071 Endist Portland

POSTED

about 12 hours ago

DEADLINE

Paving and Bollards InstallationThe contract entails paving work and the installation of bollards equipped with reflective tape to enhance site access and safety, categorized under NAICS code 237310 for heavy and civil engineering construction. The work is to be performed in Higashimatsushima, with a posted date of July 25, 2026, and a response deadline of August 7, 2026, at 2:00 AM. It is structured as a subcontract under the Department of Defense, identified by the agency identifier FA5025 356 Eceg Pk. The location of performance is specified with a zip code of 981-0503, though no state or country information is provided, and no point of contact details are listed for inquiries. The solicitation number is not available, and no set aside type is designated for this procurement.

FA5025 356 Eceg Pk

POSTED

about 12 hours ago

DEADLINE

Site Work and RestorationThe contract titled Site Work and Restoration is a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside, assigned the NAICS code 237310 for Heavy and Civil Engineering Construction. It encompasses all site preparation activities including grading, paving, trenching, and the complete restoration of the site following mechanical work, ensuring the area is returned to a finished and functional state. Performance of the work is required at a location in Dublin, Georgia, with a zip code of 31021. The contract was posted on July 25, 2026, and is managed by the 247-NETWORK Contract Office 7 within the Department of Veterans Affairs, indicating its alignment with federal procurement priorities for veteran-owned businesses. All work must be executed to meet specifications for safety, durability, and environmental compliance, with final restoration being a critical deliverable to ensure site readiness post-construction.

247-NETWORK Contract Office 7 (36C247)

POSTED

about 12 hours ago

DEADLINE

2026 Territorial Drive Widening - Phase 1 & 2The 2026 Territorial Drive Widening Phase 1 & 2 Project aims to enhance traffic operations, safety, and capacity along a major corridor in the City of North Battleford, Saskatchewan. Phase 1 focuses on widening the intersection of Territorial Drive and the adjacent Service Road to increase turning radii and pavement width, improving maneuverability for all vehicles, particularly large commercial trucks, transit buses, and emergency vehicles, while also including a pavement overlay on the southbound lanes to extend their service life. Phase 2 extends the widening efforts northbound from the Carlton Trail intersection to the Airport Road intersection, adding lane width to improve traffic flow and reduce congestion on this heavily used stretch of roadway. The project is being executed in two distinct phases to ensure systematic improvements across the corridor while minimizing long-term disruption. All qualified contractors are invited to submit bids to perform the work as the Prime Contractor, with proposals due to the City Clerk's Department by August 6, 2026, either by mail or email. Questions regarding the bid documents must be submitted by August 4, 2026. The solicitation is identified by number 20260724 and was posted on July 25, 2026, with the formal closing time set for 8:30 PM on the due date. Bids must be directed to the City Clerk’s Department at 1291-101st Street, PO Box 460, North Battleford, SK S9A 2Y6, or emailed to tenders@cityofnb.ca, with the City Clerk’s Department serving as the primary point of contact for all inquiries.

City of North Battleford

POSTED

about 23 hours ago

DEADLINE

HWY-OM-2027-47 Sign Replacement at Various Locations, OahuThe contract involves the replacement of highway signs across various locations on the Island of Oahu on an open-ended, as-needed basis, ensuring ongoing maintenance and compliance with signage standards. The work is not tied to a fixed schedule but responds to operational needs such as damage, obsolescence, or regulatory updates, requiring the contractor to remain responsive and flexible throughout the contract period. Issued under solicitation number B27000121 by the Hawaii Department of Transportation, this opportunity is open to qualified vendors with a response deadline of August 15, 2026. The project is classified under a state, local, or educational government agency type and is managed by the office in Hawaii with Alan Hilton as the primary point of contact, reachable at 808-587-1990 or alan.c.hilton@hawaii.gov. All work must be performed on Oahu, and interested parties can access further details through the provided state procurement portal.

Department of Transportation

POSTED

DEADLINE

Asphalt Milling and Crushing ServicesCherokee County Government is seeking qualified contractors to provide asphalt milling and crushing services for the processing of reclaimed asphalt pavement into properly graded crushed material suitable for reuse in base layers or as an aggregate in new asphalt mixes. The work must meet specified engineering standards for particle size, cleanliness, and durability to ensure compatibility with modern pavement construction requirements. This subcontract opportunity is open for proposals with a deadline for submissions set for August 25, 2026, and was posted on July 24, 2026, under NAICS code 237310, which classifies the work under highway and street construction services. All performance is expected to occur within the jurisdiction of Cherokee County, Georgia, with no specific location details provided beyond the state boundary. There is no set-aside designation for small businesses or other categories, and the contract is structured as a subcontract under the county’s procurement system. Proposers should ensure compliance with all technical and operational requirements for RAP processing and be prepared to demonstrate capability in handling large-volume material recovery and crushing operations.

Cherokee County Government

POSTED

DEADLINE

in about 1 month

Concrete and Asphalt Crushing Services for Public WorksCherokee County Government in Georgia is seeking competitive sealed bids for Concrete and Asphalt Crushing Services to support Public Works operations. The solicitation, identified as PE-77123-NONST-2027-000000137, was posted on July 24, 2026, with a firm deadline for responses on August 25, 2026, at 3:00 PM. Services are expected to be performed within the state of Georgia, though specific locations are not detailed. The contract is open to all qualified bidders without a designated set-aside classification, and responses must be submitted in accordance with the County’s Purchasing Department requirements. All inquiries should be directed to Matthew Tully, the primary point of contact, reachable via email at mjtully@cherokeecountyga.gov or by phone at 678-493-6459. Additional information and official documentation can be accessed through the state procurement portal at the provided uiLink.

Cherokee County Government

POSTED

DEADLINE

in about 1 month

2026 Roadway Improvement Program, Contract No. 11100-012The contract pertains to the 2026 Roadway Improvement Program, Contract No. 11100-012, under the Borough of Newtown in Bucks County, Pennsylvania, and involves comprehensive roadway improvements including full-width mill and overlay of 1,095 square yards and 105 tons of pavement, along with 745 square yards of pavement repair. Additional scope includes replacing two handicap ramps with 60 linear feet of curb and 300 square feet of sidewalk, repairing 30 linear feet of property owner curb, performing 170 square yards of additional pavement repair, placing 25 tons of leveling and scratch course material, replacing two traffic signs, and reinstalling all pavement markings. All work is subject to the Public Works Employment Verification Act and the Pennsylvania Prevailing Wage Act, requiring compliance with wage standards and submission of a completed Employment Verification Form as a condition of bid submission. Bids must include a certified check or bid bond equal to 10% of the total bid amount, along with a fully completed Bid Form, Bidder’s Qualification Statement, executed Anti-Collusion Affidavit, and signed acknowledgement of Borough Ordinance No. 788. Failure to submit any of these documents will result in bid disqualification. The contract will be awarded to the lowest responsible bidder, though the Borough retains the right to reject any or all bids and waive minor irregularities. Upon award, a Performance Bond equal to 100% of the contract price is mandatory. Proposals are due by August 17, 2026, at 2:00 PM, and the project falls under the jurisdiction of the Pennsylvania Department of Transportation’s MS-944 guidelines as outlined in the Contract Documents.

POSTED

DEADLINE

2026 Stormwater BumpoutsSealed bids for Contract No. 2026-02, 2026 Stormwater Bumpouts, will be accepted electronically through PennBID until 11:00 AM on August 18, 2026, for work within the public right-of-way in Narberth Borough, Pennsylvania. The project includes the installation of two stormwater bumpouts, replacement of damaged curb and sidewalk sections, and construction of a new curb ramp, all in accordance with contracted drawings and specifications that reference ASTM, AASHTO, PennDOT Publication 408, and Federal Standards. Bids must be accompanied by a certified check or bid bond equal to at least 10% of the bid amount, and the successful bidder must furnish a performance bond and labor and materials bond each equal to 100% of the contract value, plus a maintenance bond of 25% of the first $200,000 and 10% of any amount exceeding that, with all bonds issued by companies licensed to do business in Pennsylvania. The work must be completed within 50 consecutive calendar days from the issuance of a written notice to proceed, and liquidated damages of $500 per calendar day apply for delays beyond the scheduled completion. All labor must comply with prevailing wage rates as established by the Pennsylvania Department of Labor and Industry, and bidders must submit verified certifications including an anti-collusion affidavit, certification of non-debarment, public works employment verification, and vendor classification forms. Materials must originate from the U.S. and bear permanent markings indicating identifiable steel, with each shipment requiring a Certificate of Compliance (Form CS-4171), unique lot number, and approved material description tied to PennDOT Bulletins. Inspections occur on-site, and acceptance is contingent upon compliance with all contract documents and standards; the Engineer holds full authority to reject nonconforming work even after prior approval. The Owner reserves the right to waive irregularities or reject any bid. No formal FAR clauses are included; instead, the contract relies on numeric local clauses covering provisions required by law, protection of work and property, changes in the work, and use of explosives. Subcontracting or assignment of the contract requires prior written approval, and a competent superintendent must be present on-site continuously during construction. All submissions must be made exclusively through the PennBID portal, with no physical, faxed, or emailed bids accepted.

Montgomery County

POSTED

DEADLINE

More opportunities from Kentucky → KYTC-Div of Maintenance

Same awarding agency

Site Preparation and GroundworkThe contract titled Site Preparation and Groundwork outlines the scope of work for clearing, grading, trenching, and soil stabilization at locations where anchored barrier systems will be installed. This includes minor excavation and compaction activities necessary to ensure structural support and long-term stability of the barrier walls. The work is critical to preparing the ground for safe and effective installation of highway safety barriers and must meet engineering specifications for load-bearing capacity and erosion control. All tasks are to be performed in accordance with applicable state and federal standards for roadway construction and environmental mitigation. This is a subcontract under the Kentucky Transportation Cabinet Division of Maintenance, with a NAICS code of 238910 indicating it is classified under Other Heavy and Civil Engineering Construction. The solicitation was posted on July 24, 2026, and responses are due by August 14, 2026, at 5:30 PM Eastern Time. The place of performance is unspecified beyond being in Kentucky and may involve multiple locations across the state. There is no set-aside designation, and the contract is open to eligible subcontractors seeking to support public infrastructure projects under the KYTC’s maintenance and safety initiatives.

Site Preparation Contractors

POSTED

DEADLINE

Traffic Control and Signage for Installation ZonesThe contract involves the provision of comprehensive temporary traffic control services during the installation of barrier walls across various locations in Kentucky. Services include deploying and managing signage, cones, arrow boards, and flagging personnel to ensure safe and efficient movement of traffic through active work zones. All traffic control measures must comply with state and federal standards and require close coordination with the Kentucky Transportation Cabinet Division of Maintenance to schedule and execute lane closures without disrupting statewide travel. The work is expected to occur at multiple unspecified sites under the place of performance designation “Other,” with execution likely spanning rural and urban roadways under KYTC supervision. This subcontract, classified under NAICS code 238990 for other heavy and civil engineering construction, is open for responses until August 14, 2026, with proposals due by 5:30 PM Eastern Time. While no set-aside provisions or specific organization type requirements are detailed, the solicitation is issued by the Kentucky Transportation Cabinet and requires contractors to demonstrate experience in highway safety compliance and real-time traffic management. Interested parties must submit their proposals through the KYTC’s online portal at the provided URL, ensuring alignment with all operational, safety, and scheduling protocols defined by the state agency to maintain public safety and project timelines.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Polypropylene Barrier Wall Supply / ManufacturingThe contract solicits the supply and manufacturing of prefabricated polypropylene barrier wall units that must fully comply with Kentucky Transportation Cabinet performance and durability standards. The scope encompasses all aspects of production including raw material sourcing, molding, quality assurance testing, secure packaging, and timely delivery to designated project sites across Kentucky. All units must meet rigorous specifications to ensure structural integrity, weather resistance, and long-term functional performance under state transportation conditions. The contract is classified as a subcontract with a NAICS code of 326199, indicating it falls under other plastic product manufacturing. It was posted on July 24, 2026, with a response deadline of August 14, 2026, at 5:30 PM Eastern Time. Performance is expected to occur statewide, with no specific city designated, and the contracting authority is the Kentucky Transportation Cabinet Division of Maintenance. Bidders must be prepared to fulfill all technical, logistical, and quality control requirements without reliance on external documentation beyond the stated specifications.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Quality Inspection and Compliance TestingThe contract solicits third-party inspection services for installed barrier walls to ensure compliance with KYTC and DOT QA/QC standards, focusing on alignment, anchoring, and material integrity. Inspectors must verify that all barrier wall installations meet technical specifications and safety requirements as defined by state transportation quality assurance protocols, with findings documented and reported in accordance with established procedures. The work is non-exclusive to a specific location and may occur across multiple sites under the jurisdiction of the Kentucky Transportation Cabinet’s Division of Maintenance. The procurement is classified as a subcontract under NAICS code 541350, which pertains to engineering services, and is open for response until August 14, 2026, at 5:30 PM Eastern Time. The posting date was July 24, 2026, with performance expected to take place across Kentucky, identified broadly as "Other" in the place of performance field. There is no set aside classification provided, and no point of contact information is listed in the data. Interested parties must submit proposals through the official KYTC digital portal accessible via the provided URL.

Building Inspection Services

POSTED

DEADLINE

Transportation and Logistics for Barrier DeliveryThe contract involves the statewide transportation and just-in-time delivery of polypropylene barriers from the manufacturer to designated installation sites across all ten districts of Kentucky. The work requires reliable logistics coordination to ensure timely arrival of materials at project locations, supporting maintenance and infrastructure operations under the Kentucky Transportation Cabinet’s Division of Maintenance. The hauling services must meet strict scheduling demands to align with installation timelines and minimize site downtime. Performance of this subcontract is governed under NAICS code 484220, which classifies it as a specialized truck transportation service for freight. Bidders must respond by August 14, 2026, and the opportunity is open to qualified subcontractors without specific set-aside designations. All deliveries must be executed efficiently across the entire state, with no single central point of performance, indicating that operations will span multiple locations simultaneously. Interested parties must access the official portal through the provided link to submit proposals and comply with all contractual requirements tied to safety, scheduling, and material handling standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Site Preparation and GradingThe contract titled Site Preparation and Grading involves clearing, grading, and soil compaction activities at locations where barrier walls will be installed, ensuring a stable foundation and precise alignment for construction. All work must meet engineering standards to support the structural integrity and long-term performance of the barrier systems. The solicitation is classified as a subcontract under NAICS code 237990 and is issued by the Kentucky Transportation Cabinet Division of Maintenance. Responses are due by August 14, 2026, at 5:30 PM, with the work scope centered on sites across Kentucky, specifically designated as Other for place of performance. No setaside provisions or organizational type restrictions are specified, and the solicitation is accessible via the Kentucky VSS online portal.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Polypropylene Barrier Supply / Material ManufacturingThe contract entails the manufacture and supply of pre-fabricated polypropylene barrier units that must comply with Kentucky Transportation Cabinet specifications for durability, UV resistance, and an interlocking design to ensure secure installation and long-term performance under harsh environmental conditions. These units are intended for use in transportation infrastructure applications and must meet strict quality benchmarks to withstand outdoor exposure, heavy usage, and mechanical stress without degradation or failure. The materials and construction methods must consistently align with KYTC standards for safety and reliability in roadway and construction zone applications. The solicitation is classified as a subcontract with a response deadline of August 14, 2026, and was posted on July 24, 2026, under NAICS code 326199 for other plastic product manufacturing. Performance is expected to occur across Kentucky, with no specific city designated as the place of performance, indicating work may be distributed state-wide or delivered to multiple locations. The contracting entity is the Kentucky Transportation Cabinet Division of Maintenance, and all proposals must be submitted through the provided state portal by the deadline to be considered for award. There is no set-aside designation indicated, meaning the opportunity is open to all eligible suppliers regardless of business size or ownership.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Polypropylene Barrier Wall InstallationThe contract involves the installation of polypropylene barrier walls along highways within all ten districts of the Kentucky Transportation Cabinet’s Division of Maintenance, requiring comprehensive site preparation, precise alignment, and secure anchoring to comply with state safety regulations. Work must be performed across a broad geographic area, with no specific city designated for performance, indicating the scope spans multiple locations throughout the state. The materials and methods must meet stringent engineering and safety standards to ensure durability and effectiveness in high-traffic environments. Subcontractors are required to submit responses by August 14, 2026, at 5:30 PM Eastern Time, following a posting date of July 24, 2026. The NAICS code 238990 categorizes this as other heavy and civil engineering construction, signaling its technical and logistical complexity. The contract is classified as a subcontract, suggesting the prime contractor will manage the overall project, while this opportunity is for firms to support execution. All work must align with Kentucky’s transportation infrastructure requirements, and interested parties can access additional details through the provided online portal.

All Other Specialty Trade Contractors

POSTED

DEADLINE

RFB-605-2700000040-1 | Polypropylene Barrier Wall Construction Districts 1-10 ID/IQThe Kentucky Transportation Cabinet, Division of Maintenance, has issued an indefinite-delivery/indefinite-quantity (ID/IQ) solicitation for polypropylene barrier wall construction across all 10 transportation districts in the state. This solicitation, designated RFB-605-2700000040-1, was posted on July 24, 2026, with responses due by August 14, 2026, and is administered exclusively through the Kentucky Vendor Self Service (VSS) electronic portal. The contract scope encompasses the construction of polypropylene barrier walls at unspecified locations throughout Kentucky, with performance and delivery expected across the entire state, as indicated by the placeholder “Other” for city and state in the place of performance. The solicitation does not include detailed technical specifications, drawings, or performance standards within the provided materials, and bidders are directed to consult supplementary attachments and the VSS submission portal for complete requirements. Pricing and cost details are absent from the available data, with no contract line item numbers, unit prices, estimated value, or option quantities listed, suggesting that cost submissions will be formatted per the VSS system’s structured input fields. Evaluation of proposals will be conducted using a trade-off methodology based on both cost and non-cost factors, though specific criteria, weights, and scoring thresholds are not disclosed and must be referenced within the checklist and scoring documents uploaded through the portal. Contractors are required to submit electronic responses through VSS, with a maximum of 10 files allowed per submission, each capped at 65 MB, and supporting documentation—including technical and cost proposals—must be uploaded in the designated steps of the online process. No physical delivery, packaging, marking, or preservation requirements are specified, as the contract involves on-site construction rather than shipment of goods. All representations, certifications, and socioeconomic status disclosures are completed electronically through VSS forms during the submission process, with mandatory compliance validation checks prior to final submission. The contracting authority will oversee inspection and final acceptance of deliverables at project sites across the state, with formal acceptance recorded electronically within the VSS system. There is no mention of a specific contracting officer, technical representative, or payment office within the provided information, but general procurement support is available through the Kentucky Finance Customer Resource Center. The absence of detailed FAR clauses, special requirements, or attachment lists in the document set indicates that the complete contract package is only accessible and executable through the official VSS portal.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

RFB-605-2700000041-1 | Polypropylene Barrier Wall Construction D11 & D12 ID/IQThe Kentucky Transportation Cabinet Division of Maintenance is soliciting qualified vendors through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the construction of polypropylene barrier walls designated under D11 and D12. The solicitation, identified as RFB-605-2700000041-1, was posted on July 24, 2026, with responses due by August 14, 2026, and is administered exclusively through the Kentucky Vendor Self Service (VSS) portal, where all submissions must be completed electronically. Work is to be performed at unspecified locations across Kentucky, with no detailed site addresses provided, and vendors must comply with technical specifications referenced through the VSS system, including potential adherence to ASTM or KYTC-mandated standards, though no specific standards are listed in the publicly available materials. The contract allows for up to ten attachments per submission, each not exceeding 65 MB in size, with acceptable formats including cost, technical, and proprietary documentation, though no explicit file type restrictions are stated. The evaluation process is not detailed in the available information, but vendors are required to complete a six-step submission workflow within VSS, including responding to scoring criteria and uploading supporting materials. The solicitation does not include pricing line items, contract value estimates, or detailed delivery schedules, and no specific payment methods, accounting codes, or invoicing systems are identified, though general inquiries should be routed through designated agency contacts. All offers must be submitted by registered VSS users, with no physical submissions permitted, and while representations and certifications are required of offerors, specific details regarding small business status, UEI/CAGE codes, or socioeconomic certifications are not disclosed in the publicly accessible content. The contract is structured as an IDIQ, implying the possibility of multiple awards and subsequent task orders over the life of the agreement, with the Kentucky Department of Maintenance retaining full control over performance locations, delivery timing, and acceptance procedures based on submitted technical compliance and scoring criteria.

Highway, Street, and Bridge Construction

POSTED

DEADLINE