Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Polyurethane Coating Material Supplier

Active

Federal

Response Deadline09/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of polyurethane coating for prime contractors working on DLA Troop Support Construction and Equipment projects. The supplier is responsible for manufacturing or sourcing coating that adheres to NSN 8010-01-695-1218 and DLA Master List requirements. Compliance is mandatory regarding sampling per MIL-STD-1916 or ASQ H1331, packaging and marking per MIL-STD-2073-1E and MIL-STD-129, and the provision of hazardous material SDS as required by FAR 52.223-3. The contract specifies the delivery of 12 quarts of polyurethane coating on a FOB Destination basis. This opportunity is managed by the Department of Defense under the agency DLA DIST OKC KO CP, with the place of performance located at Tinker AFB. The response deadline for this requirement is September 21, 2026.

General Info

Supply 12 quarts of polyurethane coating for DLA projects at Tinker AFB.

Agency

Department Of Defense → DLA DIST OKC KO CPView Agency

NAICS

325510 - Paint and Coating ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-9156, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES-26-T-2780.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

POLYURETHANE COATING

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST OKC KO CP

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA DIST OKC KO CP

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies polyurethane coating for prime contractors on DLA Troop Support Construction & Equipment projects. Manufactures or sources coating meeting NSN 8010-01-695-1218 and DLA Master List requirements. Performs sampling per MIL-STD-1916 or ASQ H1331 and packaging/marking per MIL-STD-2073-1E and MIL-STD-129. Provides hazardous material SDS per FAR 52.223-3. Delivers 12 quarts of polyurethane coating FOB Destination.

Similar Contracts

Same NAICS industry code

Polyurethane Coating Supplier (NSN 8010-01-609-7204)This subcontract involves the supply of 2,000 clear polyurethane coating kits, identified by NSN 8010-01-609-7204, for prime contractors supporting DLA supply contracts. Each delivery consists of two 3-quart kits shipped FOB Destination. The products must be Type I (Code H) with a 12-month shelf life and must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality control requires sampling according to MIL-STD-1916 or ASO H1331, and the supplier must maintain full supply chain traceability as mandated by DLAD Procurement Note C03. The contract is managed by the DLA DIST OKC KO CP under NAICS code 325510, with the place of performance located at Tinker AFB.

DLA DIST OKC KO CP

POSTED

about 21 hours ago

DEADLINE

Supply of Technical Grade Lacquer (PN: 8010-00-085-0559)This subcontract involves the supply of 5,000 bottles of technical grade lacquer, identified by part number 8010-00-085-0559, for prime contractors supporting DLA Troop Support. The lacquer must conform to technical specification A-A-3164A and be delivered alongside Safety Data Sheets that comply with Federal Standard No. 313-E and the OSHA Hazard Communication Standard. The provider is required to certify the domestic end product status in accordance with the Buy American Balance of Payments Program. This procurement falls under NAICS code 325510 and is managed by the DLA Packaging Requirements for Procurement office.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT store above

POSTED

about 21 hours ago

DEADLINE

Polyurethane Kit Supply (NSN 8010-01-392-1564)This subcontract involves the supply of 1-gallon polyurethane kits under NSN 8010-01-392-1564 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. Each kit must consist of one 3-quart container of 23-T3-105 and one 1-quart container of PC-216. The contractor is responsible for delivering completed kits to specified destinations, with performance taking place in Portsmouth, 03801-7834. The contract requires strict adherence to technical and regulatory standards, including marking per MIL-STD-129 and palletization according to RP001 and MIL-STD-2073-1E. Additionally, the supplier must comply with Federal Standard No. 313 and FAR 52.223-3 regarding Safety Data Sheets. This opportunity falls under NAICS code 325510 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

CORROSION PREVENTIVE C

Solicitation # SPE8ES-27-Q-0001

OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

about 21 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-26-T-2780

DLA DIST OKC KO CP

POSTED

about 21 hours ago

DEADLINE

CORROSION PREVENTIVE C

Solicitation # SPE8ES-26-Q-0109

OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8ES-26-Q-0112

Solicitation SPE8ES-26-Q-0112 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of five bottles of lacquer, identified by NSN 8010-00-085-0559. The item must conform to technical specification A-A-3164A and is subject to a non-extendable shelf life of 24 months. This is a firm fixed price acquisition with a delivery requirement of 60 days after award. Inspection and acceptance will take place at the origin. The procurement is conducted under simplified acquisition procedures and includes strict requirements for hazardous materials, including the submission of Safety Data Sheets and labels compliant with OSHA and Federal Standard No. 313-E. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E, with specific storage requirements to keep the product above 40 degrees Fahrenheit. Additionally, the contract incorporates cybersecurity and safeguarding requirements for controlled unclassified information under DFARS 252.204-7012, 252.204-7019, and 252.204-7020. Quotations must be submitted via the DIBBS system by September 23, 2026.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT store above

POSTED

about 21 hours ago

DEADLINE

HARDENER, FILLER

Solicitation # SPE8ES-26-T-2781

Solicitation SPE8ES-26-T-2781 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of eight kits of hardener filler, identified as a commercial off the shelf item from Momentive Performance Materials Inc. (Part Number SRC18). The item is classified as a Type I (Code M) product with a non-extendable shelf life of 24 months. Delivery is required within 69 days after receipt of order, with an original required delivery date of October 15, 2026, to DLA Distribution San Joaquin in Tracy, California. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to hazardous materials standards, requiring the submission of Safety Data Sheets and Hazard Communication Standard labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must comply with MIL-STD-129 and RP001, specifically utilizing special marking code 32 for shelf-life identification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-26-T-2778

Solicitation SPE8ES-26-T-2778 is a fixed-price request for quotations issued by the Defense Logistics Agency Distribution Oklahoma City for the procurement of two kits of clear polyurethane coating, identified by NSN 8010-01-609-7204 and Akzo Nobel Aerospace Coatings part number 683-3-2/X-310A. This material is designated as a critical application item and is a Type I (Code H) item with a non-extendable shelf life of 12 months. The required delivery date is September 16, 2026, with a delivery window of five days after receipt of order. Shipping is FOB destination to Tinker AFB, Oklahoma, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the item is hazardous, the contractor must comply with IP025 and the Hazard Communication Standard 29 CFR 1910.1200 for labeling and shipping. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American Act and various DFARS cybersecurity and safeguarding regulations.

DLA DIST OKC KO CP

POSTED

about 21 hours ago

DEADLINE

KIT, POLYURETHANE CO

Solicitation # SPE8ES-26-T-2779

Solicitation SPE8ES-26-T-2779 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for one polyurethane coating kit. The required deliverable is a one gallon kit consisting of one 3 quart container of 23-T3-105 and one quart of PC-216. The item is identified by NSN 8010-01-392-1564 and is subject to a non-extendable shelf life of 12 months. Delivery is required within five days after receipt of order, with a required delivery date of September 14, 2026, to a destination in Portsmouth, New Hampshire. Inspection and acceptance will occur at the destination. The procurement is governed by NAICS code 325510 and requires compliance with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Because the material is hazardous, the supplier must provide Safety Data Sheets and hazard warning labels in accordance with Federal Standard 313-E and OSHA standards prior to award. Packaging and marking must adhere to MIL-STD-129 and DLA requirement RP001, specifically utilizing special marking code 32 for shelf-life items. All quotes must be submitted via the DLA Internet Bid Board System by September 21, 2026, and payment will be processed electronically through the Wide Area Workflow system.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Industrial Coating/Concrete Material SupplierThis subcontract opportunity with the Bristol Alliance of Companies involves the supply of specialized repair materials and industrial coatings for prime contractors working on Fleet Readiness Center East projects in Havelock, North Carolina. The scope of work includes providing structural concrete repair materials, industrial floor coatings, and water-based alkaline degreasers, along with all necessary manufacturer instructions and safety data sheets in accordance with 29 CFR 1926.59. The supplier must ensure full compliance with the Buy American-Construction Materials requirements under FAR 52.225-9 and provide all relevant technical data sheets upon delivery. This opportunity falls under NAICS code 325510, with a response deadline set for September 22, 2026.

Bristol Alliance of Companies

POSTED

about 22 hours ago

DEADLINE

THERMOPLASTICS FOR ROADWAY MARKINGS

Solicitation # 1392

The State of Idaho, on behalf of the Idaho Transportation Department, is soliciting bids under ITB 1392 for the provision of various thermoplastics for roadway markings on an as-needed basis. These products are used to guide, warn, and regulate roadway users across state infrastructure, including 29 rest areas and 12 ports of entry. The contract will be awarded to the responsive and responsible bidder offering the lowest total evaluated cost across all categories. The initial contract term is two years, with deliveries made on an FOB destination freight prepaid and allowed basis to six specific ITD districts across Idaho. Bidders must adhere to strict technical specifications, including compliance with AASHTO Standard M-249 for materials, AASHTO Standard M-247 Type 1 for glass beads, and specific retro-reflectivity and skid resistance standards. Mandatory submission requirements include a completed Submittal Form A for certifications and a detailed pricing matrix in Submittal Form B. Contractors must also meet comprehensive insurance requirements, including Commercial General Liability and Workers Compensation. All bids must be submitted electronically via the IPRO portal by the specified deadline, and any failure to comply with the mandatory submission forms or instructions will result in a bid being deemed non-responsive.

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST OKC KO CP

Same awarding agency

Resin Epoxy Material SupplierThis subcontract opportunity is for a material supplier to provide Resin Epoxy, identified by NSN 8040016773119, to prime contractors supporting DLA Troop Support Construction and Equipment contracts. The selected supplier is responsible for delivering the physical material to Tinker AFB, Oklahoma, along with the necessary Safety Data Sheets and OSHA Hazard Warning Product Labels for technical approval. All packaging and labeling must strictly adhere to OSHA standards. The contract is issued by the Department of Defense under the DLA DIST OKC KO CP agency and is designated as a Total Small Business Set-Aside. It falls under NAICS code 423690. Interested parties must submit their responses by September 21, 2026, following the posting date of September 15, 2026.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8ES-26-T-2785

Solicitation SPE8ES-26-T-2785 is a total small business set-aside request for quotations issued by DLA Troop Support for the procurement of toughened epoxy resin system fiberglass cyanate ester, identified by NSN 8040016773119. The requirement consists of two line items totaling 250 yards, with 150 yards under CLIN 0001 and 100 yards under CLIN 0002. This is a fixed-price acquisition under NAICS 325520, with a required delivery date of September 14, 2026, and a delivery window of five days after the order. The items are commercial off the shelf products with a non-extendable shelf life of 12 months and must be shipped and stored at 0 degrees Fahrenheit. The contract mandates strict adherence to hazardous material standards, requiring the submission and technical approval of Safety Data Sheets and OSHA Hazard Warning labels prior to award in accordance with 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically utilizing Special Marking Code 32 for shelf-life items. Delivery is FOB Destination to Tinker AFB, Oklahoma, and must be shipped via the fastest traceable means. Administrative requirements include the use of Wide Area WorkFlow for electronic invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act and Berry Amendment, and the safeguarding of covered defense information.

Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Sealing Compound (NSN 8030016927431)This subcontract with the Department of Defense, managed by DLA DIST OKC KO CP, involves the supply of 4,000 units of blue sealing compound in 16-ounce containers under NSN 8030016927431. The materials are intended for prime contractors supporting DLA Troop Support Construction and Equipment contracts, with the place of performance located at Tinker AFB. The contractor must adhere to strict quality and logistics standards, including the use of climate-controlled storage and transport to keep temperatures below 85 degrees Fahrenheit. Additionally, all shipments must comply with MIL-STD-129 marking requirements and RP001 DLA Packaging Requirements for palletization. The contract falls under NAICS code 325620.

Toilet Preparation Manufacturing

POSTED

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-26-T-2772

Solicitation SPE8ES-26-T-2772 is a request for quotes for the acquisition of four units of blue sealing compound, identified by NSN 8030016927431. The item is a critical application product, specified as a 16-ounce kit, with a 12-month extendable shelf life. The procurement is managed by DLA Troop Support Construction and Equipment, with a required delivery date of December 4, 2025, and a delivery timeframe of five days after receipt of order. Shipping is designated as FOB Destination, with both inspection and acceptance occurring at the destination, specifically Tinker AFB, Oklahoma. The contract imposes strict handling and quality requirements, including storage below 85 degrees Fahrenheit and compliance with MIL-STD-129 for marking and RP001 for palletization. Because the material is hazardous, the contractor must adhere to the Hazard Communication Standard and IP025 for packaging and shipping. Key regulatory requirements include the Buy American and Balance of Payments Program, NIST SP 800-171 for cybersecurity, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotes must be submitted via the DIBBS portal.

Wood Preservation

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS