Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Portable Power Station Supply

Active

Federal

Response Deadline09/28/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract with the Department of Defense involves the supply of high-capacity portable power stations for prime contractors on FA3016 projects. The required equipment must feature a minimum 2,000Wh capacity, 1,600W continuous AC output, and 3,200W peak surge pure AC output. All units must utilize pure sine wave AC inverters and be certified for quiet, emissions-free indoor operation. The contract requires full compliance with the Buy American Act and specifies that delivery of the units will be handled as FOB Destination. This opportunity falls under NAICS code 335312 and is specifically designated as a total small business set-aside.

General Info

DoD small business subcontract for high-capacity portable power stations under NAICS 335312.

Agency

Department Of Defense → FA3016 502 Cons Cl

NAICS

335312 - Motor and Generator Manufacturing

Place of Performance

0, TX, 78236, USA

Set-Aside

SBA

Documents

This scope was carved out of FA301626Q0296.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Portable Power Stations

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 04:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA3016 502 Cons Cl

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA3016 502 Cons Cl

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-capacity portable power stations for prime contractors on FA3016 (502 Cons Cl) projects. Provides units with minimum 2,000Wh capacity, 1,600W continuous AC output, and 3,200W peak surge pure AC output. Equipment must feature pure sine wave AC inverters and be certified for emissions-free, quiet, indoor operation. Must be Buy American Act compliant. Delivers portable power station units FOB Destination.

Similar Contracts

Same NAICS industry code

MOTOR, DIRECT CURRENT

Solicitation # SPE4A6-26-T-32DA

DLA Aviation is soliciting quotes for the procurement of six direct current motors under National Stock Number 6105006696199. The items are to be delivered to the DLA Distribution Depot Oklahoma within 171 days after the order is placed. Approved sources for this requirement include 70210 36745-1-1 and SCW49 36745-1-1. This request for quote, identified by solicitation number SPE4A626T32DA, is open to all responsible sources. Quotes must be submitted electronically by the deadline of September 25, 2026. No hard copies of the solicitation or accompanying technical drawings and specifications are available.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-26-T-352W

This solicitation, issued by the DLA Land and Maritime Maritime Supply Chain under number SPE7M1-26-T-352W, is a Request for Quotations for two alternating current motors, identified by NSN 6105-01-361-5410. The procurement is not a small business set-aside and requires quotes to be submitted through the DIBBS system. Key technical requirements include adherence to DLA packaging standards (RP001) and the DLA Master List of Technical and Quality Requirements (RA001). Specific manufacturer part numbers are noted for General Electric, ABB Motors & Mechanical Inc, and Siemens Energy and Automation Inc. The contract includes strict prohibitions against the intentional addition of mercury to hardware and requires specific labeling for any hazardous materials in accordance with the Hazard Communication Standard. The delivery terms are FOB Origin under the First Destination Transportation program, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is December 17, 2026, with a need ship date of March 9, 2027. Inspection and acceptance will occur at the destination. Contractors must use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Compliance with various federal regulations is mandatory, including the Buy American Act, DFARS safeguarding of covered defense information, and provisions regarding combating trafficking in persons. Offerors are cautioned that additive manufacturing is not permitted unless specifically authorized, and they must disclose if any offered materials are non-domestic.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

ROTOR CORE, GENERATOR

Solicitation # SPE4A5-26-T-442G

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

Modular Three-Phase UPS System SupplierThis subcontract opportunity is for the supply of a Modular Three-Phase Uninterruptible Power Supply UPS System to support power infrastructure projects at Oak Ridge National Laboratory. The required equipment is a 100 kVA/kW 480V system that must include an integrated cabinet, integrated monitoring capabilities, and RIB, BIB, and MIB breakers. The contract is managed by Ornl Ut-Battelle Llc-Doe Contractor under the Department of Energy. Prospective suppliers must be registered in SAM and provide export control certification if the application involves nuclear or military specifications. The performance location is in Oak Ridge, Tennessee, with a response deadline of October 2, 2026.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 23 hours ago

DEADLINE

Electrical Control Systems & IntegrationThis subcontract for Electrical Control Systems and Integration supports prime contractors on Air Force Test Center projects located at Arnold AFB. The scope of work involves the design, construction, and delivery of integrated electrical control systems for installation within a furnace, utilizing PLC programming, HMI panels, and industrial wiring. The contractor is responsible for ensuring all electrical systems and safety integrations comply with NFPA 70 and NFPA 79 standards. This project falls under NAICS code 335312 and is managed by the Department of Defense through the FA9101 Aedc Pkp Procurement Branch.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 23 hours ago

DEADLINE

61--REGULATOR,VOLTAGE, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RUC01

Solicitation N00104-26-R-UC01 is issued by NAVSUP Weapon Systems Support Mechanicsburg for the teardown, evaluation, repair, and modification of 101 voltage regulators, identified by NSN 6110-01-355-2933 and part number 821-76790-00. The government is seeking a firm-fixed price for the repair, and the award will be made using the Lowest Price Technically Acceptable (LPTA) source selection process, though some documentation also references a trade-off evaluation where past performance is weighted more heavily than price. The requested repair turnaround time is 356 days after receipt of the asset, with an induction expiration date set at 365 days after the contract award. Failure to meet the required turnaround time may result in a price reduction per unit per month. The contractor must be an authorized repair source and is responsible for all inspection and testing according to original manufacturer specifications. Key requirements include adherence to IUID standards under DFARS 252.211-7003 and physical identification per MIL-STD-130. Packaging must comply with MIL-STD-2073, with specific packing levels based on whether the destination is domestic or overseas. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The solicitation has undergone two amendments, with the final response deadline extended to October 15, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

61--MOTOR,ALTERNATING C, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMA92

The contract solicitation pertains to the repair or modification of an alternating current motor, identified by NSN 7R-6105-008807012-EK, with a quantity of 14 units required. Technical Data Package Version 011 governs the specifications, and delivery terms are set at FOB origin, meaning the contractor is responsible for loading the items at their location and transportation costs begin after that point. The solicitation, issued under N0038326QMA92, was posted on August 7, 2026, with responses due by September 22, 2026, at 04:00 UTC. It is classified as a presolicitation, indicating it is an early-stage notice to gauge industry interest before formal procurement begins, and no set-aside provisions are identified. The contracting activity is the Naval Supply Systems Command Weapon Systems Support, operating under the Department of Defense, with the office located in Philadelphia, Pennsylvania, zip code 19111-5098. Primary point of contact is Ethan T. Stein, reachable via email at ETHAN.T.STEIN.CIV@US.NAVY.MIL or by phone at (215) 697-2983. The place of performance is unspecified, and the official solicitation can be viewed on SAM.gov through the provided link.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in about 1 month

PANEL,CONTROL,ELECT

Solicitation # SPRPA126QYD68

Solicitation SPRPA1-26-Q-YD68 is a fixed-price request for quotation issued by DLA Aviation at Philadelphia on September 25, 2026, for the procurement of one Electrical Control Panel, identified by NSN 6110-01-473-0410 and NIIN 014730410. This acquisition is conducted under Emergency Acquisition Flexibilities authority, with a response deadline of October 26, 2026. The item must be delivered within 90 days, FOB Destination, to the DLA Distribution facility in New Cumberland, Pennsylvania. The government intends to make a single award to a technically acceptable offeror, evaluating bids based on technical acceptability, past performance, and price and supplier risk. Strict adherence to packaging and marking standards is required, specifically MIL-STD-2073-1 for military stock and MIL-STD-129 for labeling. Inspection and acceptance will occur at the origin. The contract incorporates various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including Buy American requirements, cybersecurity safeguarding for covered defense information, and prohibitions relating to Chinese military companies. Payment and invoicing must be processed through the Wide Area Workflow system.

Pa DLA Aviation At Philadelphia

POSTED

about 23 hours ago

DEADLINE

in about 1 month

NRP,POWER SUPPLY A0

Solicitation # SPRPA126QYD60

Solicitation SPRPA1-26-Q-YD60 is a fixed-price request for quotations issued by DLA Aviation at Philadelphia on September 25, 2026, for the procurement of Power Supply AO units (NSN 6115-01-646-0665). This requirement is issued under Emergency Acquisition Flexibility authority, with a delivery deadline of 90 days. The government intends to make a single award based on the most advantageous offer, explicitly weighing past performance as more important than price. Evaluation will include risk assessments via the Supplier Performance Risk System focusing on item, price, and supplier risk. The contract mandates strict adherence to military standards, including MIL-STD-2073 for packaging and MIL-STD-129 for marking. All items must be preserved according to specific packing levels based on the destination, and unique item identifiers must comply with ISO/IEC International Standard 16022. Inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Additionally, the contractor must comply with Buy American and Balance of Payments programs, NIST SP 800-171 cybersecurity standards, and specific hazardous material identification protocols under 49 CFR.

Pa DLA Aviation At Philadelphia

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Supply of Alternating Current Motors (NSN 6105-01-667-5678)This subcontract involves the supply of specialized alternating current motors meeting NSN 6105-01-667-5678 specifications for prime contractors under DLA and Naval Supply contracts. The provider is responsible for manufacturing or sourcing the motors, maintaining the baseline configuration, and submitting Engineering Change Proposals in accordance with DI-SESS-80639E. Deliverables include the physical motors and all required configuration documentation. The contract requires strict adherence to the Buy American Act and specific labeling standards, including DLR labels and UIDs for any units valued over 5,000 dollars. Managed by the Department of the Navy through the DLA Aviation office in Philadelphia, the opportunity falls under NAICS code 335312. Responses are due by October 26, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

MOTOR,ALTERNATING C — 6105016675678 — SPRPA126QYD67

Solicitation # SPRPA1-26-Q-YD67

DLA Aviation at Philadelphia has issued a Request for Quotations (RFQ) under Emergency Acquisition Flexibilities authority for the procurement of an Alternating Current Motor, identified by NSN 6105-01-667-5678. The solicitation, numbered SPRPA1-26-Q-YD67, was posted on September 25, 2026, with a response deadline of October 26, 2026. The item has been identified as non-critical. The scope of work requires the contractor to maintain the total equipment baseline configuration, including all hardware, software, and firmware, and to submit Engineering Change Proposals in accordance with specified technical standards. The required delivery timeframe is 90 days. The government intends to make a single award to the most advantageous offeror based on a combination of price and past performance, with past performance weighted more heavily than price. Evaluation will include assessments of item risk, price risk, and supplier risk via the Supplier Performance Risk System. The contract includes stringent packaging and marking requirements, such as MIL-STD-129 for labeling and specific packing levels for domestic and overseas shipments. Compliance with various federal regulations is mandatory, including Buy American provisions, cybersecurity standards for safeguarding defense information, and hazardous material identification protocols. Invoicing and payment requests must be processed electronically through the Wide Area Workflow (WAWF) system.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

Supply of Electrical Engine Starters (NSN 2920-01-534-6175)This subcontract involves the supply of six electrical engine starters, specifically matching NSN 2920015346175, for prime contractors supporting DLA Land and Maritime supply contracts. The deliverables must adhere to RA001 technical and quality requirements, and the provider is required to disclose the brand, model, OEM part number, and production entity for any covered defense telecommunications equipment. Managed by the Department of Defense under the Land Supplier Opns Engines agency, the contract falls under NAICS code 335312. Performance is designated for New Cumberland, Pennsylvania, with a response deadline set for September 29, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

More opportunities from Department Of Defense → FA3016 502 Cons Cl

Same awarding agency

Solicitation # FA301626Q7151

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 23 hours ago

DEADLINE

Weatherproof Solar Panel Array SupplyThis subcontract opportunity with the Department of Defense, specifically for FA3016 502 Cons Cl projects, seeks a provider of weatherproof solar panel arrays. The required equipment must feature a minimum output of 100W with a nominal 20V output and 24V Voc, including integrated kickstands and 15-foot connection cords. Additionally, the panels must support modular parallel link capabilities to allow for the connection of multiple units and must be fully compliant with the Buy American Act. This is a total Small Business Set Aside under NAICS code 335999. The solicitation was posted on September 24, 2026, with a response deadline of September 28, 2026. Performance is associated with the 78236 zip code area.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Portable Power Stations

Solicitation # FA301626Q0296

Motor and Generator Manufacturing

POSTED

DEADLINE

Pest Control and Vegetation Management (Chemical Application)This 8(a) set-aside subcontract with the Department of Defense involves providing pest control and vegetation management services for prime contractors at JBSA Randolph in San Antonio. The scope of work focuses on managing invasive species and protecting plant health through the application of approved herbicides and pesticides using specialized sprayers to ensure weed-controlled and pest-free grounds. Qualified providers must hold all state-mandated pesticide applicator licenses and certifications. The opportunity falls under NAICS code 561790 and is managed by the FA3016 502 Cons Cl agency. Interested parties must submit their responses by September 30, 2026.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Arboriculture and Shrub Care (Pruning & Trimming)This 8(a) set-aside subcontract, titled Arboriculture and Shrub Care (Pruning and Trimming), involves providing specialized care for woody plants, shrubs, and trees for prime contractors on projects at JBSA Randolph in San Antonio. The scope of work includes trimming and pruning hedges, trees, and other plants using equipment such as pole saws, pruning shears, and bucket trucks, while ensuring all work adheres to commercial pruning standards and local licensing requirements. The opportunity is issued by the Department of Defense under NAICS code 561730. Interested parties must respond by September 30, 2026, following the posting date of September 22, 2026.

Landscaping Services

POSTED

DEADLINE

General Grounds Maintenance (Mowing & Edging)This 8(a) set-aside subcontract for the Department of Defense involves general grounds maintenance, specifically mowing and edging, at JBSA Randolph, the Seguin Auxiliary Airfield, and the Canyon Lake Recreation Area in San Antonio. The contractor is responsible for routine turf management and vegetation control using commercial equipment to ensure all grass and borders are maintained according to commercial landscaping standards and all applicable federal, regional, state, and local laws. The project falls under NAICS code 561730 and is managed by the 502 Cons Cl agency. Interested parties must respond by September 30, 2026, following the posting date of September 22, 2026.

Landscaping Services

POSTED

DEADLINE

HVAC Parts & Refrigerant SupplyThis subcontract opportunity with the Department of Defense, specifically the 502 Cons Cl, involves the supply of replacement components and refrigerant gases for prime contractors working on Air Force projects at JBSA Lackland and Fort Sam Houston. The scope of work includes providing OEM or approved equivalent chiller components, such as sensors and compressors, along with the necessary refrigerant for system recharging according to manufacturer specifications. All itemized parts and materials must be delivered directly to the designated job sites. The contract is designated as a total Small Business Set Aside under NAICS code 335311. Interested parties must submit their responses by October 15, 2026, at 3:00 PM. Performance will take place in the 78236 zip code area.

Motor and Generator Manufacturing

POSTED

DEADLINE

HVAC Chiller Diagnostic & Repair ServicesThis subcontract for HVAC Chiller Diagnostic and Repair Services involves the mechanical repair and troubleshooting of eight portable chiller units supporting Air Force projects at JBSA Lackland and Fort Sam Houston. The scope of work includes visual inspections, electronic leak detection, system dehydration through deep evacuation, and refrigerant recharging. The contractor is required to deliver eight fully restored chiller units along with detailed written diagnostic reports. To be eligible, personnel must hold EPA Section 608 Universal Certification and technical certifications from Trane or NC3. This opportunity is designated as a total Small Business Set Aside under NAICS code 238220 for the Department of Defense. Responses are due by October 15, 2026, for performance in the 78236 zip code area.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

RND Grounds Maintenance - Sources Sought - JBSA Randolph

Solicitation # RND-GROUNDS-2026

This sources sought inquiry, solicitation number RND-GROUNDS-2026, is directed at 8(a) small businesses with the capability to provide non-personal grounds maintenance services under NAICS 561730. The scope of work involves providing all necessary personnel, equipment, tools, and supervision to maintain Joint Base San Antonio (JBSA) Randolph, Seguin Auxiliary Airfield, and the Canyon Lake Recreation Area. The primary objective is to ensure a professional appearance and promote healthy growth of grass, trees, shrubs, and plants through services including mowing, edging, vegetation control, pruning, and the application of herbicides and pest control. Interested vendors must submit a capability statement and a completed questionnaire by September 30, 2026. The questionnaire requires detailed information regarding the vendor's local presence in San Antonio, Texas, past performance on government or commercial contracts, total square footage maintained, and specific contract values. Contractors are expected to comply with all applicable federal, regional, state, and local laws, as well as commercial standards, and must obtain all required licenses, certificates, and permits to perform the work.

Landscaping Services

POSTED

DEADLINE

Troubleshoot & Repair of Portable Chillers Service Requirement

Solicitation # FA301626R0035

Solicitation FA301626R0035 is a Request for Proposal for a Firm-Fixed-Price contract to troubleshoot, repair, and restore eight portable chiller units at Joint Base San Antonio (JBSA) Lackland and Fort Sam Houston, Texas. The project involves returning all units to manufacturer specifications through comprehensive diagnostics, leak detection, component replacement, and performance validation. Currently, units at Lackland are operating at roughly 50% capacity, while those at Fort Sam Houston are non-operational. The effort is set aside 100% for Women-Owned Small Businesses (WOSB) under NAICS 238220, with a performance period running from November 1, 2026, to March 1, 2027. The contract is structured across three Contract Line Item Numbers: 40 hours for diagnostic services, 650 hours for repair work, and a not-to-exceed lot of 350,000 dollars for parts and materials. Award will be based on the Lowest-Price Technically-Acceptable (LPTA) method, requiring a pass/fail technical evaluation of the offeror's repair plan and personnel qualifications. Specifically, technicians must hold a valid EPA Section 608 Universal Certification. The government reserves the right to cancel the solicitation if funds are not available, as funding is not presently secured. Proposals must be submitted electronically to the designated contracting officers by October 15, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Freight and Delivery Services (Lackland AFB)This small business set-aside subcontract involves the transportation and delivery of 150 industrial chairs for prime contractors supporting FA3016 502 Cons Cl projects. The selected provider is responsible for picking up the furniture from the manufacturer and ensuring secure transport to Lackland AFB in Texas, specifically delivering to DoDAAC F2MTLE at Building 7535. The contractor must possess the necessary credentials for military installation access at Lackland AFB and is required to provide signed receiving reports as official proof of delivery. This effort falls under NAICS code 484220 and is managed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Industrial Instructor ChairsThis small business set aside subcontract with the Department of Defense involves the procurement of 150 industrial grade instructor chairs for prime contractors on FA3016 502 Cons Cl projects. The contractor is responsible for manufacturing or sourcing chairs that specifically match Raven, Mimico, or IC2 models, ensuring all items are properly packaged and marked for shipment to Lackland AFB in Texas. Key requirements include strict compliance with DoD prohibited product disclosures and the provision of all necessary warranty information. The final deliverable consists of 150 accepted industrial chairs delivered to the specified location in zip code 78236.

Office Furniture (except Wood) Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS