Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Pre-Delivery Inspection and Quality Assurance

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A pre-delivery inspection contract has been issued to ensure all 13 units undergo a thorough pre-shipment quality check to confirm full compliance with established technical specifications and to detect any concealed damage before final delivery. The inspection must be conducted with precision to guarantee that each unit meets required standards and is free from hidden defects that could compromise performance or safety. This subcontract is designated as a total small business set-aside under the SBA program, specifically targeted toward small businesses as defined by FAR 19.5, and falls under NAICS code 541330 for architectural, engineering, and related services. The work is to be performed in Oklahoma City, Oklahoma, with a zip code of 73105, and responses are due by August 6, 2026, at 5:00 PM. The solicitation was posted on July 27, 2026, and is managed by the Department of Veterans Affairs through the Network Contract Office 19.

General Info

13 units to be inspected in Oklahoma City for compliance, small business set-aside, response due August 6, 2026.

Agency

Department Of Veterans Affairs → Network Contract Office 19 (36C259)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Oklahoma City, CO, 73105

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → Network Contract Office 19 (36C259)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → Network Contract Office 19 (36C259)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct pre-shipment inspection of all 13 units to verify compliance with technical specifications and ensure no concealed damage prior to delivery.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity contract for major construction projects across multiple delivery methods including Design Build, Progressive Design Build, and other alternative delivery models. The scope encompasses full lifecycle support from planning and design through construction and closeout, ensuring projects adhere to authorized schedules, budgets, and quality standards. This IDIQ will enable the Port to rapidly mobilize expert CM resources as new project opportunities arise without requiring separate solicitations for each engagement. Services will be performed at various locations within the Port’s jurisdiction, with primary point of contact being Hala Rabbo, and project management coordination handled by Ann Davidson. The contract is classified under NAICS code 541330 for Architectural, Engineering, and Related Services, and is forecasted for release in July 2026. Interested parties should note that while the solicitation number and set-aside details are not yet available, the procurement is intended to establish a long-term framework for ongoing construction management support across the Port’s capital improvement programs.

Construction Management

POSTED

about 10 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across the extensive facilities and infrastructure systems at Seattle-Tacoma International Airport, operating within a high-stakes, nonstop 24/7/365 environment. The scope centers on diagnosing and correcting performance gaps in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, occupant comfort, and system longevity, while ensuring compliance with all safety and regulatory mandates. Work is structured around Service Directives issued by Aviation Facilities and Infrastructure and executed in close coordination with Port of Seattle staff to meet defined deliverables and operational continuity goals. The contract is an Indefinite Delivery/Indefinite Quantity vehicle under NAICS code 541330, issued by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager, both reachable through dedicated phone lines and email addresses. All work is to be performed at the airport premises, and while the solicitation was posted in 2026, no set-aside details or funding caps are specified, indicating the potential for ongoing, scalable engagement based on facility needs. The procurement is not yet active, providing early visibility to interested parties ahead of eventual release.

Aviation Facilities & Infrastructure

POSTED

about 10 hours ago

DEADLINE

Field Inspection and Quality Verification ServicesTexas Department of Transportation is seeking qualified contractors to perform independent field inspections and compliance verification of repaired crash cushions to ensure proper alignment, structural integrity, and adherence to TxDOT and MASH safety standards. The work involves on-site evaluation of installed or refurbished crash cushions to confirm they meet all required engineering and safety criteria prior to reactivation or final acceptance. This subcontract opportunity is open to eligible parties who can demonstrate technical expertise in transportation safety systems and experience with state and national highway safety protocols. Bids must be submitted by August 18, 2026, at 4:30 PM Central Time, with the solicitation posted on July 27, 2026. The contract falls under NAICS code 541330 for engineering services and is classified as a subcontract under TxDOT’s procurement framework. Performance is expected to occur across Texas roadways where repaired crash cushions are deployed, though specific locations are not detailed in the posting. Interested parties should review the full solicitation details through the provided Texas SmartBuy link to understand evaluation criteria, reporting requirements, and submission guidelines.

Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

Quality Control and Submittal ManagementThe contract entails the coordination and preparation of shop drawings, product data, and samples for review and approval by the Architect/Engineer to ensure strict adherence to project specifications. This work is critical for maintaining compliance throughout the construction process and requires meticulous attention to detail, timely submission, and alignment with design intent and regulatory standards. The contractor is responsible for managing the entire submittal workflow, from initial preparation through final approval, ensuring all documentation meets the required quality and technical criteria. The solicitation is a subcontract for Quality Control and Submittal Management under NAICS code 541330, posted on July 27, 2026, with a response deadline of August 19, 2026. It is issued by the State of Utah and is open for proposals through the BonfireHub platform. The place of performance and specific office address are not detailed, but the work relates to projects under Utah’s jurisdiction. There is no set-aside designation or point of contact provided, and bidders must adhere to the outlined scope without additional guidance beyond the stated requirements.

POSTED

about 22 hours ago

DEADLINE

As-Built Record DocumentationThe contract titled As-Built Record Documentation requires the submission of updated as-built drawings and technical specifications that accurately reflect the final installed conditions of a project. This subcontract is focused on ensuring that all documentation aligns with the actual constructed state, capturing deviations, modifications, and final installations that may differ from original plans. The work involves meticulous field verification, data collection, and clear presentation of updated records to serve as a reliable reference for future maintenance, renovations, or regulatory compliance. The opportunity was posted on July 27, 2026, with a response deadline of August 26, 2026, and is categorized under NAICS code 541330, which pertains to architectural and engineering services. The contracting agency is the State of Utah, with no specific office address or point of contact provided. The place of performance details are not specified, indicating that the work may be project-specific and location-dependent. Subcontractors must be prepared to deliver precise, high-quality documentation in accordance with state standards and timelines.

POSTED

about 22 hours ago

DEADLINE

Shop Drawing and Submittal PreparationThe contract seeks specialized support for the preparation and submission of shop drawings, product data, and physical samples required for approval by architectural and engineering authorities. This work is critical to ensuring that materials, components, and systems align with project specifications and regulatory standards before implementation. The contractor is expected to coordinate closely with design teams to produce accurate, compliant, and timely submittals that meet rigorous technical requirements and deadlines. The opportunity is classified as a subcontract under NAICS code 541330, indicating it falls within architectural and engineering services. It was posted on July 27, 2026, with a response deadline of August 26, 2026, and is associated with the state of Utah, though specific location or office details are not provided. The solicitation is accessible via a public online portal, with no set-aside provisions indicated, meaning all qualified entities may respond without demographic or size-based restrictions.

POSTED

about 22 hours ago

DEADLINE

REQUEST FOR QUALIFICATIONS (RFQ) PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUThe City of Swainsboro and the East Georgia Regional Airport Authority are soliciting qualified aviation consulting firms to provide on-call professional services in support of the Airport Capital Improvement Plan at the East Georgia Regional Airport in Swainsboro, Georgia. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and construction phase oversight. Services are expected to be provided as needed across multiple projects under the capital improvement plan, requiring firms to demonstrate expertise in airport-specific infrastructure, regulatory compliance, and federal aviation standards. Proposals must be submitted by the deadline of August 13, 2026, and the solicitation is open under the identification number PE-66723-NONST-2026-000000020. Interested firms should direct inquiries to Jerry Cadle at Jerry@cadlelawfirm.com, the designated point of contact. While the solicitation does not specify a set-aside or NAICS code, it is issued by a state and local government entity and requires responders to prove capability in delivering high-quality, compliance-driven aviation consulting services within the unique context of municipal airport development. Performance is expected to occur at the East Georgia Regional Airport in Georgia, with the selected firm required to maintain flexibility and responsiveness to meet the evolving needs of the airport’s capital improvement initiatives.

City of Swainsboro

POSTED

about 23 hours ago

DEADLINE

Fire Alarm System Inspection & Testing ServicesThe contract requires the performance of NFPA 72-compliant inspection and testing of fire alarm control panels and all associated devices across multiple facilities operated by Dallas Area Rapid Transit. The work is focused on ensuring full regulatory compliance and operational reliability of fire alarm systems throughout the transit system’s infrastructure. Contractors must demonstrate technical expertise in inspecting, testing, and documenting the functionality of alarm panels, initiating devices, notification appliances, and related components in accordance with the latest edition of NFPA 72 standards. This subcontract is open for response until August 4, 2026, with the solicitation posted on July 27, 2026. The NAICS code 541330 indicates that the work falls under architectural, engineering, and related services, with performance required at DART facilities across Texas. While specific locations and point of contact details are not provided, the scope demands consistent adherence to code, thorough documentation of findings, and timely remediation of any deficiencies identified during inspections. Contractors must be prepared to work on-site across multiple locations and maintain full compliance with all applicable fire safety regulations.

Dallas Area Rapid Transit

POSTED

about 24 hours ago

DEADLINE

Structural Design and Engineering ServicesThe contract encompasses the full scope of engineering and design services for a custom outdoor structure, requiring detailed CAD modeling, thorough structural analysis, and the creation of comprehensive construction drawings that comply with all applicable safety and environmental regulations. The work must be executed to ensure structural integrity and long-term resilience under real-world conditions, with all deliverables aligned to industry best practices and regulatory requirements. This is a subcontract opportunity under NAICS code 541330, issued by DFW International Airport in Texas, with a very tight submission window opening on July 27, 2026, and closing just three days later on July 30, 2026. The place of performance and specific location details are not provided, but the project is tied to airport infrastructure, suggesting stringent compliance standards and potential coordination with operational authorities. Interested parties must respond promptly as the deadline is approaching rapidly and no set-aside provisions are specified for small businesses or other categories.

Dfw International Airport

POSTED

about 24 hours ago

DEADLINE

First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → Network Contract Office 19 (36C259)

Same awarding agency

Print & Digital Materials ProductionThe contract titled Print & Digital Materials Production seeks a subcontractor to design and produce a range of visual and informational materials for a conference, including printed programs, signage, handouts, slide decks, and digital content destined for distribution. The work requires expertise in both print and digital media production, with attention to branding consistency, timely delivery, and high-quality output across all formats. The solicitation is open for submissions with a response deadline of August 3, 2026, and is classified under NAICS code 541810, which pertains to advertising and related services. This contract is issued by the Department of Veterans Affairs through the Network Contract Office 19, and while the place of performance and point of contact details are unspecified, the work is expected to support official VA events and communications initiatives. Interested parties must respond by the stated deadline to be considered for award.

Advertising Agencies

POSTED

DEADLINE

Audiovisual & Technical Support for Hybrid/Virtual SessionsThe contract seeks comprehensive audiovisual and technical support services for the delivery of hybrid conference sessions, encompassing the provision of AV equipment, live streaming capabilities, virtual platform hosting, and on-site and remote technical support to ensure seamless integration between in-person and virtual participants. The scope requires reliable, scalable infrastructure capable of handling high-volume concurrent access, professional-grade audio and video production, and real-time troubleshooting to maintain uninterrupted streaming and participant engagement throughout the event. This subcontract is issued under NAICS code 518210 for Data Processing, Hosting, and Related Services, and is managed by the Department of Veterans Affairs through the Network Contract Office 19. The solicitation was posted on July 27, 2026, with a firm deadline for responses on August 3, 2026, at 9:30 PM Eastern Time. Performance will occur at an unspecified location, and while details regarding set-aside status or point of contact are not provided, interested parties are directed to the SAM.gov workspace for formal submission and further instructions.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Geriatric Clinical Content DevelopmentThe contract titled Geriatric Clinical Content Development requires the creation of evidence-based clinical content focused on age-friendly practices, alignment with CMS policies, and interdisciplinary care models designed for older adults. The content must be developed to support presentation and broad dissemination across healthcare settings, ensuring practical application and integration into existing systems. This effort is grounded in current best practices and aims to improve care delivery for veteran populations by promoting standardized, policy-compliant, and collaborative care approaches. The contract is classified as a subcontract under NAICS code 541611, indicating it involves management, scientific, and technical consulting services. It was posted on July 27, 2026, with a firm response deadline of August 3, 2026, at 9:30 PM Eastern Time. The contracting activity is managed by the Network Contract Office 19 under the Department of Veterans Affairs, with no specific location or set-aside provisions indicated. All work is expected to align with federal healthcare standards and support the VA's mission to enhance geriatric care through high-quality, policy-informed educational resources.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Conference Planning & Event LogisticsThe contract seeks a subcontractor to provide comprehensive event management services for the annual geriatric conference, encompassing full lifecycle planning and execution including venue coordination, attendee registration, session scheduling, speaker transportation and accommodation logistics, and real-time on-site support throughout the event. The work must be performed to ensure seamless operations and professional delivery aligned with the standards expected by the Department of Veterans Affairs. The opportunity is classified under NAICS code 561910 for other support services and is designated as a subcontract with no specific set-aside criteria. The solicitation was posted on July 27, 2026, and responses are due by August 3, 2026, at 9:30 PM Eastern Time. The contracting office is Network Contract Office 19 under the Department of Veterans Affairs, though no specific place of performance or point of contact details are provided in the available data.

Packaging and Labeling Services

POSTED

DEADLINE

Continuing Medical Education (CME) Program Development & AccreditationThe contract calls for the design and delivery of accredited continuing medical education content focused on geriatric care, with particular emphasis on perioperative management and patient-centered treatment planning. The program must meet established accreditation standards and be developed to enhance clinical competence among healthcare providers who care for older adults, ensuring that educational materials are evidence-based, clinically relevant, and aligned with best practices in aging care. The work is classified as a subcontract under NAICS code 611430, indicating it falls within the category of other schools and instruction, and is being managed by the Department of Veterans Affairs through its Network Contract Office 19. The solicitation was posted on July 27, 2026, with a response deadline of August 3, 2026, at 9:30 PM Eastern Time, indicating a tight turnaround for proposals. There is no set-aside designation specified, and no detailed point of contact or place of performance information is provided, suggesting that work may be performed remotely or at the contractor’s location. The contract does not specify geographic restrictions, allowing flexibility in delivery methods as long as the educational content meets accreditation requirements and addresses the targeted clinical domains in geriatric medicine. Proposers must demonstrate capacity to deliver high-quality, accredited CME programming with a clear focus on improving outcomes for elderly patients in surgical and longitudinal care settings.

Professional and Management Development Training

POSTED

DEADLINE

Domestic Manufacturing and Supply Chain ComplianceThe contract requires domestic manufacturing or final assembly of otoscope and ophthalmoscope units in the United States to ensure full compliance with the Buy American Act and U.S. Department of Veterans Affairs domestic sourcing regulations. All work must be performed within the U.S. supply chain, with final assembly occurring at the specified place of performance in Oklahoma City, Oklahoma, and all components must meet strict domestic content thresholds to qualify. This is a small business set-aside under SBA guidelines, meaning only businesses classified as small under the NAICS code 339112 for surgical and medical instrument manufacturing are eligible to bid. The solicitation was posted on July 27, 2026, with responses due by August 6, 2026, at 5:00 PM Eastern Time. The contracting activity is managed by the Department of Veterans Affairs through Network Contract Office 19, and the contract type is classified as a subcontract, suggesting it may be part of a larger procurement program. Compliance with federal procurement rules regarding domestic production is mandatory, and bidders must demonstrate verifiable capabilities in U.S.-based manufacturing, quality control, and supply chain transparency to meet VA requirements.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Installation and On-Site Integration ServicesThe contract outlines the on-site installation and integration of 13 medical units at the Oklahoma City VA facility, requiring wall mounting, precise sensor calibration, and seamless connectivity with existing clinic infrastructure. All work must be performed in person at the designated location with a ZIP code of 73105, ensuring full compatibility and operational readiness within the VA’s healthcare environment. The project demands technical expertise in medical equipment deployment and adherence to facility-specific protocols for patient safety and system interoperability. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, exclusively available to small businesses. The NAICS code 811212 identifies the scope as medical and diagnostic equipment repair and maintenance services. The solicitation was posted on July 27, 2026, with responses due by August 6, 2026, and the contracting entity is the Department of Veterans Affairs through Network Contract Office 19. Failure to meet deadlines or technical requirements may result in disqualification, and all work must comply with VA standards and regulations.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Supply of LED Otoscope/Ophthalmoscope UnitsThe contract seeks the procurement and delivery of thirteen fully assembled, wall-mounted otoscope/ophthalmoscope units equipped with LED lighting, automatic sensors, and an integrated ear specula dispenser for use at the VA Women’s Health Clinic in Oklahoma City. These devices must be designed for clinical efficiency and hygiene, featuring advanced functionality to support diagnostic evaluations in a women’s health setting. The units must be delivered in complete working condition, ready for immediate installation and use without requiring additional assembly or components. This is a small business set-aside contract under the SBA program, meaning only eligible small businesses may respond, and the action is governed by FAR 19.5. The NAICS code 339112 indicates the industry classification for medical equipment and supply manufacturing. The solicitation was posted on July 27, 2026, with proposals due by 5:00 PM on August 6, 2026, and the contract will be awarded and managed by the Department of Veterans Affairs through Network Contract Office 19. Performance is required at the facility located in Oklahoma City, with a zip code of 73105, and all deliverables must meet the technical and functional specifications outlined in the procurement requirements.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Technical Support and Training ServicesThe contract entails the provision of comprehensive training services for clinical staff focused on the proper operation, safety protocols, and routine maintenance of operating room tables and integrated warming systems, with delivery options available both on-site and virtually to accommodate diverse facility needs. The scope includes the development and distribution of tailored training materials and ongoing follow-up support to ensure sustained competency and effective utilization of the equipment across clinical environments. Training is designed to enhance patient safety and equipment longevity through standardized, hands-on instruction aligned with industry best practices. This subcontract is issued under the NAICS code 541611 by the Department of Veterans Affairs through its Network Contract Office 19, with performance expected to occur in Cheyenne, Wyoming, under a tight timeline, as proposals must be submitted by August 4, 2026. The requirement targets qualified technical service providers capable of delivering specialized medical equipment training in compliance with VA standards, ensuring clinical teams are thoroughly prepared to manage critical surgical support systems with precision and confidence.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Delivery, Installation, and Commissioning of Medical EquipmentThe contract involves the on-site delivery, uncrating, inspection, assembly, and commissioning of two operating room tables at the Cheyenne VA Medical Center, with the goal of ensuring full operational functionality upon completion. All activities must be performed at the specified location, requiring precise coordination to meet facility standards and patient care requirements. The scope encompasses every phase from physical arrival of the equipment through final testing and validation to confirm the tables are fully functional and compliant with clinical use specifications. This is a subcontract under the Department of Veterans Affairs, managed by Network Contract Office 19, with a solicitation posted on July 27, 2026, and a response deadline of August 4, 2026. The NAICS code 811310 categorizes the work under medical equipment repair and maintenance services. Performance is strictly limited to the Cheyenne, Wyoming location with a ZIP code of 82001, and all work must be completed in alignment with VA protocols. No set-aside status is indicated, and there is no publicly listed point of contact, requiring proposers to follow standard submission guidelines through the SAM.gov portal for consideration.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Supply of OR Tables with Integrated Patient Warming SystemThe contract entails the supply of two surgical tables equipped with integrated patient warming systems, designed to meet rigorous clinical and technical standards for safety, precise articulation, radiolucency, and compliance with infection control protocols. These tables are intended for use in operating rooms and must ensure optimal performance during surgical procedures while maintaining patient comfort and thermal regulation throughout the operation. All components must comply with applicable regulatory and industry requirements to guarantee reliability, durability, and compatibility with existing hospital infrastructure. The opportunity is issued as a subcontract under the Department of Veterans Affairs, specifically managed by Network Contract Office 19, with performance required at a location in Cheyenne, Wyoming, 82001. The solicitation was posted on July 27, 2026, and responses are due by August 4, 2026, at 6:00 PM. The NAICS code 339113 identifies the scope as medical equipment manufacturing, indicating that vendors must have the capability to produce or supply certified surgical table systems that integrate warming technology without compromising structural integrity or sterility. This procurement aims to enhance surgical outcomes through advanced equipment that supports both operational efficiency and patient safety.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Vascular Ultrasound MachineThis contract is a total service-disabled veteran-owned small business (SDVOSB) set-aside for the supply, delivery, and installation of a single vascular ultrasound machine at the Oklahoma City Veterans Affairs Medical Center, with performance scheduled between August 3 and August 17, 2026. The procurement is conducted under NAICS code 339112 and is governed by a firm-fixed-price contract type, evaluated on a lowest price technically acceptable (LPTA) basis, where technical compliance is a pass/fail threshold and price is the sole determining factor among qualified offers. The equipment must meet stringent technical requirements including FDA clearance, UL and IEC safety standards, EMR-ready connectivity, CW Doppler, 8 MHz probe capability, ABI/segmental pressure functionality, and be a domestic end product under the Buy American Act with at least 60–75% U.S.-based content. All items must be new, original equipment manufacturer (OEM) units, with no gray market, remanufactured, or used components permitted, and vendors must be authorized OEMs or resellers to ensure warranty validity. The offeror must be a certified SDVOSB currently registered in SAM with an active Unique Entity Identifier and CAGE Code, and must provide signed certifications confirming size status, SDVOSB ownership and control through the VetCert portal, and compliance with the nonmanufacturer rule if applicable. Subcontracting is tightly regulated under FAR 52.219-14 and VAAR 852.219-74, requiring the prime contractor to perform at least 50% of the cost of contract performance with its own employees. All deliveries are F.O.B. Destination to the VA Medical Center in Oklahoma City, with the contractor bearing full responsibility for safe transport, white-glove installation, protection of existing facilities, and coordination with site personnel. Payment must be requested electronically via approved VA systems, and failure to comply with any certification, delivery, or compliance requirement—such as providing OEM authorization or accurate country-of-origin disclosures—may constitute a material breach. Proposals must be submitted as a single email under 4MB in size to the designated point of contact, Luther Dickens, by 3:00 PM MST on August 3, 2026; no alternate submission methods are accepted.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE