This Subcontract opportunity from Department Of Defense was posted on August 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Pre-Engineered Membrane Building Supply & Installation

Closed

Federal

Submission Closed09/16/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332311

New

SLED

Provide and Install 85' x 60' Fabric Structure

Solicitation # 270006555

The City of Richmond, Virginia, is soliciting quotes for the provision and installation of a clear span fabric structure measuring 85 feet wide by 60 feet high. The project, located at 802 Forest Lawn Dr, requires a steel frame with five open web trusses and flame retardant fabric. The structure must be installed on existing 6-foot tall blocks and remain open on both end walls. Delivery is required by December 31, 2026, with final project completion and installation set for April 1, 2027. The contract will be awarded to the lowest acceptable quote. Bidders must be authorized to transact business in Virginia, provide a State Corporation Commission identification number, and certify they are not debarred from government contracting. Mandatory requirements include comprehensive insurance coverage, including General Liability, Auto Liability, and Workers Compensation with a minimum of 1 million dollars per occurrence for liability policies. Payment terms are Net 45 days, subject to annual appropriations by the City Council. All bids must be submitted electronically via the OpenGov portal by the specified deadline.

POSTED

DEADLINE

To Supply & Deliver a Storage Shed Kit for Discovery Harbour

Solicitation # tender_22227

The Government of Ontario, through the Ministry of Tourism, Culture and Gaming, is soliciting bids for the supply and delivery of one complete prefabricated steel building kit for Huronia Historical Parks at Discovery Harbour in Penetanguishene, Ontario. The required kit must measure approximately 50 feet by 100 feet by 16 feet and include all structural steel components, roof and wall panels, framed door openings, trim, engineered drawings, anchor bolt plans, installation instructions, and all necessary hardware, fasteners, flashing, and sealants. The scope is limited to the supply and delivery of the kit, with an estimated delivery date of January 31, 2027; site preparation, foundation construction, and installation are explicitly excluded from this procurement. The contract is structured as a Request for Bid with an anticipated start date of January 4, 2027, and a one-year term. Award selection is based on a two-stage evaluation process: first, a review of mandatory requirements and qualifications, and second, a commercial evaluation where the highest scoring compliant bid is selected using a pricing formula based on the lowest bid price. Bidders must provide a nine-digit CRA business number, a Tax Compliance Verification number, and three client references from the last three years. All delivery costs, including freight, handling, customs, and fuel surcharges, must be included in the lump sum price. Successful proponents must also provide proof of insurance and W.S.I.B coverage and adhere to the Occupational Health and Safety Act.

Tourism, Culture and Gaming

POSTED

DEADLINE

Bus Shelters and Amenities

Solicitation # 26-15

Ben Franklin Transit is soliciting proposals under RFP 26-15 for the design, fabrication, and delivery of prefabricated bus stop shelters to serve its urban transit system in Washington. The project requires shelters to be structurally engineered by a registered architect, weatherproof, vandal-resistant, and compliant with all applicable building codes and ADA requirements. Key technical specifications include the use of clear tempered safety glass, anti-graffiti coating, and a preference for tinted polycarbonate roof materials, while polycarbonate panel inserts are rejected. Shelters must be shipped knock-down for on-site assembly and must be capable of supporting future on-time arrival technology displays without structural modification. Optional amenities may include ADA-compliant benches, lean rails, trash receptacles, bicycle racks, and solar-powered LED lighting. The contract has a maximum value of 950,000 dollars and a potential five-year term, with an initial minimum order of ten shelters to be delivered within 120 calendar days of the Notice to Proceed. Price adjustments for subsequent years are capped at 5 percent based on the CPI. BFT requires a minimum three-year workmanship warranty and a five-year finish warranty, with replacement parts guaranteed for ten years. Proposals must be submitted via the OpenGov portal by December 8, 2026, at 2:00 pm PDT. Evaluation is based on the best interest of BFT, and awarded contractors must register with the System for Award Management within five days of notification. Payment terms are set at 30 calendar days following the receipt of a proper invoice.

POSTED

DEADLINE

Модульна конструкція з меблями для розміщення охорони у приміщенні виконкому Павлоградської міської ради з монтажем (ДК 021: 2015 44210000-5 Конструкції та їх частини)

Solicitation # UA-2026-11-09-009926-a

The Executive Committee of the Pavlohrad City Council is soliciting bids for the procurement and installation of a modular construction unit equipped with furniture to accommodate security personnel. The project is located within the premises of the city council in Pavlohrad, Dnipropetrovsk region, Ukraine, and falls under the classification for constructions and their parts. This solicitation, identified by number UA-2026-11-09-009926-a, was posted on November 9, 2026. Interested parties can coordinate with the primary point of contact, Viktoria Viktorivna Morar, via the provided email or phone details to manage the submission process through the Prozorro electronic system.

Виконавчий комітет Павлоградської міської ради

POSTED

DEADLINE

Supply of Critical Application Flat Washers (Pratt & Whitney)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, involves the procurement of six specialized flat washers designated as Critical Application Items. The contract specifically requires part number 3022615 manufactured by Pratt & Whitney Canada Corp to support prime contractors. Strict adherence to quality and traceability standards is mandatory due to the critical nature of the application. Additionally, the supplier must ensure all items comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026, under NAICS code 332311.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Torpedo Propeller Guard Manufacturing and SupplyThis subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, involves the manufacture and supply of 119 torpedo propeller guards under NSN 4921009750809. The components must be produced using white ABS plastic material conforming to Fed Standard 595 color code 37875 and assembled with NASM35206 fasteners. All deliverables require a Certificate of Quality Compliance and must adhere to packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. The contract is designated as a Total Small Business Set-Aside under NAICS code 332311, with performance located in Bremerton. To be eligible, the provider must maintain a quality system compliant with either SAE AS9003 or ISO 9001. The response deadline for this requirement is November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Air Pressure Relay Valve SupplyThis subcontract involves the manufacture or procurement of 110 specialized air pressure relay valves meeting NSN 2530016925359 specifications. The contractor will support prime contractors delivering for the DLA Weapons Support Land Supplier Opns Vehicle Spt under the Department of Defense. Key operational requirements include strict compliance with First Article Test standards and the coordination of deliveries through the First Destination Transportation program. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332311, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Western Area Power Administration (WAPA) Sierra Nevada Region (SNR) has a requirement for a equipment shelter at the Elverta Maintenance Facility (EMF) in Elverta, CA, to include onsite installation.The Western Area Power Administration, under the Department of Energy's Sierra Nevada Region, is forecasting a requirement for an equipment shelter to be located at the Elverta Maintenance Facility in Elverta, California. This project encompasses both the procurement of the shelter and its complete onsite installation. The opportunity is categorized under NAICS code 332311 and is designated as a small business set-aside. Western Metal Supply Company, Inc. is listed as the incumbent contractor for this requirement. Interested parties may coordinate with the Small Business Program Managers for further information.

Western Area Power Administration

POSTED

DEADLINE

«Пункт боєпостачання(мобільний)(3000х2400)» за ДК 021:2015 – 44210000-5 Конструкції та їх частини

Solicitation # UA-2026-11-07-000247-a

Military Unit A0339 of the Government of Ukraine is soliciting bids for the procurement of mobile supply points measuring 3000x2400, categorized under construction structures and their parts. This procurement is being conducted via a simplified procedure in accordance with the special defense procurement regulations established by Cabinet of Ministers of Ukraine Resolution No. 1275 for the duration of martial law. The solicitation was posted on November 7, 2026, with a response deadline set for November 18, 2026. The performance of the contract will take place within the Zhytomyr region of Ukraine. Interested parties may contact Andriy Yuriyovych Bondarchuk for further information regarding this tender.

Військова частина А0339

POSTED

DEADLINE

Fabrication and Supply of Valve Actuator GuardsThis subcontract involves the fabrication and supply of 1,282 Valve Actuator Guards for the DLA Weapons Support Land Supply Chain. The manufacturer is responsible for producing the units according to Army and DCSC Drawing 16236 CS-2300-0001 specifications, applying Chemical Agent Resistant Coatings, and adhering to MIL-STD-1916 zero-based sampling standards. Finished, coated, and packaged guards must be delivered to DLA Distribution Barstow. To be eligible for this project, the contractor must maintain CMMC Level 2 and ITAR compliance. The work falls under NAICS code 332311 and is managed under the Department of Defense. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring SupplyThis subcontract with the DLA Weapons Support Land Supply Chain involves the manufacture and delivery of 38 helical compression springs. The contractor is responsible for ensuring all hardware meets strict technical specifications, including the prohibition of mercury and ozone-depleting chemicals. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The agreement emphasizes rigorous compliance and security, requiring supply chain traceability per DLAD Procurement Notes C03 and adherence to DFARS cybersecurity standards. Performance will take place in Phoenix, Arizona, and the final delivery must include comprehensive traceability documentation to satisfy Department of Defense requirements.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Poppet Hull Drain Valve AssembliesThis subcontract involves the manufacture and supply of 13 poppet hull drain valve assemblies for prime contractors under DLA Weapons Support supply contracts. The fabrication must strictly follow part numbers Willard Marine 58367 P/N 12367 or P/N K12367, utilizing precision machining equipment to meet all specifications. The contractor must adhere to the DLA Master List of Technical and Quality Requirements and comply with NAVSEA 5100-003D mercury restrictions. Additionally, the provider is required to maintain DFARS 252.204-7012 cybersecurity compliance. Performance of the contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 6 days

AI Contract Overview

This subcontract involves the supply and installation of four pre-engineered membrane-shelled buildings, each measuring 450 square meters, for prime contractors supporting US Air Force PACAF projects. The work is located at the Matsushima JASDF Base in Higashimatsushima, Japan, and is managed under the Department of Defense. The scope of work includes the fabrication and erection of the membrane structures, specifically requiring the installation of personnel doors and sliding doors on both the long and short ends of the buildings. The final deliverable consists of four completed warehouse structures. The solicitation was posted on August 28, 2026, with a response deadline of September 16, 2026.

General Info

Supply and install four 450sqm membrane buildings at Matsushima JASDF Base, Japan.

Agency

Department Of Defense → FA5025 356 Eceg Pk

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

Higashimatsushima, JP-04, 981-0503, JPN

Set-Aside

NONE

Documents

This scope was carved out of FA502526RB006.

The full solicitation package (12 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Matsushima JASDF Base Storage Shelter

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 28

subcontract

Response DeadlineSep 16

Deadline has passed

Submission Closed

09/16/2026, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA5025 356 Eceg Pk

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA5025 356 Eceg Pk

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies and installs four 450 square meter membrane-shelled pre-engineered buildings for prime contractors on US Air Force PACAF projects at Matsushima JASDF Base, Japan. Fabricates and erects membrane structures, including installation of sliding doors on long and short ends and personnel doors. Delivers four completed warehouse structures.