Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Aerospace Component Manufacturing

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of a Panel, Fillet Fairing identified by NSN 1560008466057, following precise military specifications outlined in drawings STP59-007 and NR 98897. The scope encompasses the full lifecycle of production including material sourcing, machining, forming, finishing, and rigorous inspection, all conducted to meet stringent aerospace quality standards. Each component must adhere to exact dimensional and performance requirements to ensure compatibility and reliability in defense applications. This subcontract is issued under the NAICS code 336411 for Aircraft and Aircraft Parts Manufacturing and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The place of performance is designated as Robins AFB, Georgia, with a response deadline of August 5, 2026, and the solicitation was posted on July 28, 2026. All work must comply with federal procurement requirements and be delivered to the specified military installation, with no set-aside provisions indicated.

General Info

Manufacture Panel Fillet Fairing NSN 1560008466057 to military specs for Robins AFB by August 5, 2026

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a Panel, Fillet Fairing (NSN: 1560008466057) per military drawings STP59-007 and NR 98897, including material sourcing, machining, forming, finishing, and inspection to aerospace standards.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7L1-26-T-888H

The contract pertains to the procurement of five gaskets identified by NSN 5330-00-090-4690 under solicitation SPE7L1-26-T-888H, with a required delivery within five days of award. Technical and quality requirements governing this item are referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The gasket must be free of asbestos as defined in FED-STD-313, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the item, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 336411. Primary point of contact is Kristina Derry at kristina.derry@dla.mil or 614-692-0158.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L4-26-U-1031

This contract is for the procurement of a gasket with NSN 5330-01-044-4882, issued under solicitation SPE7L4-26-U-1031 as a total small business set-aside under NAICS code 336411. The item is designated as a critical application component with strict prohibitions against asbestos per FED-STD-313 and must be supplied by approved vendors including Rubbercraft Corporation of California, Parker-Hannifin Corporation, Stillman Seal Corporation, and Hutchinson Seal de Mexico. The quantity is estimated at 167 units, each priced at $167.00, with delivery required within 97 days FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at origin, and packaging must comply fully with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, opaque bagging to protect against UV deterioration. Packaging and marking adhere to MIL-STD-129 and DLA’s packaging requirements, with no special marking codes applied. The contract governs direct vendor delivery, foreign military sales, and stock shipments, and includes specific handling protocols for hazardous materials under IP025. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date. The point of contact is Heather Kessler, and the solicitation response deadline is August 13, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

F/A-18 Flight-Critical Radome Repair ServicesThe contract requires technical inspection, repair, testing, and return of the F/A-18 radome, a flight-critical component identified by NSN 013485145 and Item C026, under strict government source approval protocols. These services are essential to maintain operational readiness and airworthiness of the aircraft, with one unit to be processed in Year 4 and another in Year 5, ensuring sustained mission capability. All work must be performed in compliance with Department of Defense standards and approved repair procedures, with the place of performance located in Hazelwood, Missouri, at the 63042 zip code. The contract is classified as a subcontract under NAICS code 336411, which aligns with aircraft manufacturing and repair activities. It was posted on July 29, 2026, with a response deadline of August 3, 2026, at 7:00 PM, indicating a tight turnaround for qualified vendors to submit proposals. The contracting activity is managed by Navsup Wss Philadelphia under the Department of Defense, emphasizing the federal government’s direct oversight and the critical nature of the component being serviced. No set-aside provisions are specified, and the contract does not identify a point of contact, suggesting reliance on the official SAM.gov portal for all communications and documentation.

Navsup Wss Philadelphia

POSTED

DEADLINE

FSG53 HARDD SPE4A2-26-R-0002 TDMT Notice

Solicitation # SPE4A2-26-R-0002-0008

The solicitation SPE4A2-26-R-0002-0008, issued by DLA Aviation under the Department of Defense, is an administrative amendment extending the closing date for offer submissions from July 20, 2026, to August 25, 2026, at 3:00 PM Eastern Time, due to technical data management system access issues. The amendment, documented via Standard Form 30, confirms that the place of performance and official receipt point for proposals remains at 6090 Strathmore Road, Richmond, Virginia, 23237, and requires offerors to return signed copies of the amendment with their submissions. No contract value, pricing details, or financial terms are included, as this document solely modifies the timeline for response submission. Access to technical data is coordinated through the TDMT system, with file locations for each NIIN provided in an attached spreadsheet; system access inquiries must be directed to the TDMT Customer Service Helpdesk using the provided website and email, including NSN/NIIN/Material number, solicitation number, and CAGE code. The solicitation does not contain Section C statement of work, Section B pricing data, Section E inspection criteria, Section H special requirements, Section M evaluation factors, or any FAR contract clauses, representations, or certifications. Packaging, marking, invoicing methods, accounting codes, and delivery terms such as FOB are not specified in the materials provided, and submission is understood to be paper-based, with no electronic portal indicated. The only point of contact provided is Christina Richardson at Christina.Richardson@dla.mil, and no Contracting Officer or COR details are listed. This amendment does not alter the underlying solicitation’s technical scope or award criteria, only its submission deadline.

POSTED

DEADLINE

FAA-Certified Part Labeling and DocumentationThe contract requires the application of FAA-certified part labels and strict adherence to aviation logistics standards to ensure full traceability of components used in defense-related aircraft systems. Work must be performed at Robins Air Force Base, Georgia, with all labeling and documentation processes meeting federal aviation regulatory requirements to maintain compliance and operational safety. The subcontract is tied to a Defense Logistics Agency solicitation under NAICS code 336411, indicating involvement in aerospace product and parts manufacturing, and responses are due by August 10, 2026. All activities must support the Department of Defense’s supply chain integrity, with no set-aside provisions specified, meaning any qualified entity may submit a proposal. The work is essential for sustaining mission-critical aviation assets through accurate part identification and documented provenance.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Aerospace Skin Panel SupplyThe contract calls for the supply of two aerospace SKIN components, likely fuselage or wing panels, to meet stringent Department of Defense standards set by DLA Fleet Readiness Center DLA PSC. These components must comply with technical specifications, quality requirements, and specialized packaging and labeling protocols defined by DLA for defense applications. The effort is classified as a subcontract under NAICS code 336411, indicating it falls within the aircraft manufacturing sector. The place of performance is firmly designated as Cherry Point, North Carolina, with a zip code of 28533-0021, suggesting final integration or inspection will occur at a military aviation facility there. All proposals must be submitted by August 5, 2026, following a posting date of July 28, 2026, leaving a seven-day window for potential vendors to respond. The solicitation is accessible through the DIBBS platform, and while no point of contact is listed, compliance with DLA’s operational and logistical standards is mandatory for award consideration.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Aircraft Engine Fairing Frame ManufacturingThe contract mandates the manufacture and assembly of a precision aircraft gas turbine engine fairing frame, identified by part number 52G169-01, to meet stringent military specifications covering materials, structural durability, and operational performance. The work must adhere to exacting technical standards to ensure compatibility and reliability within aerospace defense systems, with all components subject to rigorous quality control protocols. This subcontract is issued under the NAICS code 336411, indicating its focus on aircraft engine and engine parts manufacturing, and is managed by the Department of Defense through its Aviation Supply Chain ESOC Buys division. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026, leaving prospective contractors a limited window to submit proposals. The place of performance and point of contact details are not specified, but the work is expected to support DoD aerospace requirements and is accessible via the DIBBS procurement portal. There is no set-aside designation, meaning the contract is open to all qualified vendors regardless of business size or status, and full compliance with military-grade engineering and certification criteria is mandatory for award consideration.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Aircraft Air Diffuser UnitThe contract seeks the manufacture or supply of four units of the aircraft air diffuser component identified by NSN 1660011856475, with all items required to meet strict military specifications and quality standards. The effort is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense procurement. The solicitation falls under NAICS code 336411, which classifies the activity within the Aircraft and Aircraft Parts Manufacturing sector, indicating the specialized nature of the required supply. The posting date is July 28, 2026, with a firm response deadline of August 5, 2026, allowing potential vendors a short window to prepare and submit proposals. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific location details for performance or contact information are not provided, the official solicitation can be accessed via the DIBBS portal using the provided link. All submissions must fully comply with the technical, quality, and regulatory requirements associated with defense aviation components to ensure mission readiness and operational safety.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Carbon Seal Supply and DeliveryThe contract calls for the supply and delivery of eight units of carbon seals with NSN 5330-LN-003-3627, intended for use in critical aerospace systems where zero-defect quality standards are mandatory. Each unit must meet stringent military compliance requirements, including packaging specifications designed to ensure integrity during transport and storage under demanding operational conditions. The item is classified under NAICS code 336411, indicating its alignment with aerospace component manufacturing, and is being procured as a subcontract under the Department of Defense. Performance of the contract is designated to occur at Cherry Point, North Carolina, with delivery expected to support immediate operational readiness at this military installation. The solicitation was posted on July 28, 2026, and responses must be submitted by August 5, 2026, with no set-aside provisions applied. All submissions must adhere to the DLA Fleet Readiness Center’s technical and compliance protocols to be considered.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

DIFFUSER, AIR, AIRCRA

Solicitation # SPE4A7-26-T-598Q

The contract is for the procurement of four aircraft heating and ventilation air diffusers under solicitation SPE4A7-26-T-598Q, issued by the Department of Defense through the Defense Logistics Agency. The requirement is a total small business set-aside under FAR 19.5, with a firm fixed-price contract structure and a delivery deadline of 20 days after order placement. The delivery location is Hangar 2 East, Postbox 416026, Geilenkirchen, Germany. The item, identified by NSN 1660-01-185-6475, must comply with stringent technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, as well as industry standards such as SAE AS9003 and tailored ISO 9001. Packaging must adhere to MIL-STD-2073-1E Level B with Q code and D3 container type, and all items must be marked according to MIL-STD-129, though Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Physical identification and bare item marking are mandated under RQ017. The contractor must maintain CMMC Level 2 certification as a Certified Third-Party Assessment Organization and comply with DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. Technical data associated with the product is subject to export controls under either ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, including foreign nationals in the U.S., and is restricted to DLA-approved contractors who have completed the Joint Certification Program, export-controlled data training, and questionnaire. Hazardous materials must be labeled per 29 CFR 1910.1200, with exemptions applicable under specific statutes. All invoicing must be processed through Wide Area Workflow, and payments are subject to accelerated processing for small business subcontractors. The contractor must also adhere to clauses addressing trafficking in persons, employment eligibility verification, sustainable procurement, disabled worker equal opportunity, and prohibitions on hexavalent chromium and procurement from Communist Chinese military companies. No key personnel requirements, option periods, or organizational conflict of interest provisions are specified, and all representations and certifications remain uncompleted as part of the solicitation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

DUCT ASSEMBLY, AIR C

Solicitation # SPE4A7-26-T-598F

The contract is for two units of a duct assembly for air conditioning and heating, identified by NSN 1660-01-048-9861, under solicitation SPE4A7-26-T-598F, with a response deadline of August 5, 2026, and a delivery requirement of 577 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on the acquisition size. The vendor must comply with extensive documentation and compliance standards, including submission of a Source Approval Request, adherence to DLA packaging requirements, and implementation of configuration change management through Engineering Change Proposals or variance requests. Cybersecurity requirements mandate CMMC Level 2 self-assessment and certification by a C3PAO. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and require contractors to hold JCP certification, complete mandatory DOD export training, and receive formal approval from DLA to access controlled data. Inspection and acceptance must occur at origin, with government identification removed from non-accepted items. The place of performance is Jacksonville, Florida, and the point of contact is Georgina Vass at DLA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

WEIGHT, BLADE, ROTARY

Solicitation # SPE4A5-26-T-312L

The contract pertains to the procurement of a rotary blade item identified by part number 214-015-019-001 and NSN 1615-00-511-7217, with a total quantity of nine units to be delivered under solicitation SPE4A5-26-T-312L. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. The item is classified as a critical application and must adhere to specific configuration change management, packaging, and identification standards. Packaging must comply with MIL-STD-2073-1E and DLA packaging guidelines, including marking per MIL-STD-129 with no special marking codes, and palletization as defined in RP001. The item is to be delivered FOB origin within 20 days of contract award, with no quantity variance permitted, and inspection and acceptance both occur at the origin point. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Unit of issue is each (EA), and the recipient is the Taiwan Army at the Zuo-Ying Ammunition Sub facility in Kaohsiung City, Taiwan. The contract requires source approval documentation, physical identification of the bare item, and prohibition of government identification removal from non-accepted supplies. Item Unique Identification is not required per customer request, and the contractor must comply with all referenced standards unless an approved deviation or waiver is granted. The required delivery date is July 30, 2026, with bids due by August 5, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

PARTS KIT, SEAL REPL

Solicitation # SPE4A7-26-T-599Y

The contract pertains to a parts kit for mechanical seal replacement, identified by the part number 110-004-19-0150 and NSN 1560-01-524-3353, with a single unit requirement. It is issued under solicitation SPE4A7-26-T-599Y by the Department of Defense through the ASC Supplier Oper AE and AF Division and is targeted for delivery to the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung City. The delivery deadline is 20 days after award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at origin, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking and palletization standards under DLA packaging requirements. The item is designated as a critical application, with qualified suppliers including Atlantic India Rubber Co Inc, Kirkhill Inc, Rubbercraft Corporation of California, and Bell Textron Inc. Quality and procurement requirements are governed by tailored higher-level contract quality standards applicable to both manufacturers and non-manufacturers, incorporating technical and quality criteria from the DLA Master List. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes are classified with specific verification levels or AQLs. Configuration changes require a formal engineering change proposal or variance request, and government identification must be removed from non-accepted supplies. Hazardous materials packaging must adhere to IP025 guidelines. The contract includes a required delivery date of July 31, 2026, and specifies a single unit at unit price of $1.00. Transportation is subject to DLA procedures, and the solicitation is open for response until August 6, 2026, with the primary point of contact being Jack Bolan at DLA.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

THERMOSTAT, FLOW CONTRO

Solicitation # SPE4A7-26-T-599X

The contract specifies the procurement of a Thermostat, Flow Control with NSN 6685-01-368-0419 and part numbers 247-7133 and 2ET322, quantity of 366 units, to be delivered FOB origin within 171 days, with a required ship date of January 25, 2027, and original delivery date of January 18, 2027. The item is designated as a critical application and must comply with strict packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging and palletization follow DLA’s procurement guidelines, and the unit is delivered to the DLA Distribution facility in New Cumberland, PA. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling rules defined by MIL-STD-1916 or ASQ H1331, and unspecified attributes treated as major. Configuration change management and deviation requests are governed under RQ002, while documentation for source approval must meet RC001 standards. Measurement equipment, technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award date depending on acquisition size. The contract is a total small business set-aside under NAICS code 334519, issued as a solicitation on July 29, 2026, with responses due August 6, 2026. Unit of issue is each (EA), with no quantity variance allowed, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i).

Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

SPLICE, CONDUCTOR

Solicitation # SPE4A7-26-T-599S

This contract issued by the Defense Logistics Agency under solicitation SPE4A7-26-T-599S specifies the procurement of 25 units of conductor splice components, identified by NSN 5940-00-961-0479, from approved vendors including Ideal Industries Inc, Grove U.S. LLC, and United Equipment Accessories Inc, each with their respective CAGE codes and part numbers. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951 for packaging. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Physical marking and identification of items must follow RQ017 requirements, ensuring clear labeling per contract specifications. Delivery is required within five days of contract award, FOB origin, with zero variance allowed in quantity. Items must be packaged in accordance with MIL-STD-129 and DLA Packaging Requirements, palletized per RP001, and labeled with the specified Unit of Issue and Quantity per Unit Pack. Shipment must be sent via the fastest traceable method excluding parcel post to the Sierra Army Depot in Herlong, California, with identical freight and mark-for addresses. The required delivery date is July 24, 2026, and all items must be marked with designated government identifiers including the TCN and DIC codes. Inspection and acceptance occur at the destination, and only DLA authorized units of issue apply. The contract is managed under NAICS code 335931, with primary contact Jesse Saul at DLA, and is exclusively for federal government use.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

SELECTOR SET, HYDRAU

Solicitation # SPE4A7-26-T-600K

The contract pertains to the procurement of a Hydraulic Selector Set with part number HP891501T, supplied by TACTAIR FLUID CONTROLS INC, CAGE 70236, identified by NSN 1630-00-939-8534. The item is classified as a Commercial Off the Shelf (COTS) product and is designated as a Critical Application Item requiring Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Delivery is mandated within 39 days of contract award, with FOB Origin terms and mandatory delivery to DLA Distribution Cherry Point in North Carolina. The required quantity is seven units, with no variance allowed in shipment quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging guidelines. Documentation requirements include compliance with DLA’s Master List of Technical and Quality Requirements, and the removal of government identification from non-accepted supplies. The solicitation number is SPE4A7-26-T-600K, issued with a response deadline of August 6, 2026, and the original required delivery date is January 28, 2027, though the need-by date is set for September 15, 2026. Unit price is $7.00 per unit, totaling $49.00, with procurement governed by Defense Federal Acquisition Regulation Supplement (DFARS) provisions and DoD unit of issue standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

MOUNT, RESILIENT, WEA

Solicitation # SPE4A7-26-T-600E

The contract pertains to the procurement of a resilient weapon mount, identified by part number 26001578-101 and NSN 5342017278571, with a total quantity of ten units to be delivered under solicitation SPE4A7-26-T-600E. Delivery is required within 114 days from the contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with stringent quality standards including MIL-STD-1916 or ASQ H1331 for sampling, with critical attributes held to a zero-defect acceptance criterion unless otherwise stipulated. The product must adhere to DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, using prescribed methods for protection, wrapping, and containment, and palletization must meet DLA guidelines. The item is classified as a critical application component under The Boeing Company’s specifications and is subject to cybersecurity compliance under CMMC Level 2 self-assessment, along with documentation mandates for source approval and removal of government identification from non-accepted items. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping details governed by DLAD procedural notes C19 and C20. The contract was posted on July 29, 2026, with responses due by August 6, 2026, and the original required delivery date is set for May 5, 2027, while the needed ship date is November 29, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List, and the procurement falls under NAICS code 332510, managed by the Department of Defense’s ASC Supplier Operations division.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

TERMINAL, QUICK DISCONN

Solicitation # SPE4A7-26-T-599U

The contract is for a single unit of a terminal, quick disconnect, identified by NSN 5940-01-602-4565 and part number 12077412-L, under solicitation SPE4A7-26-T-599U. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but must fully comply with all DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s RP001 packaging standards. Sampling for quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, employing zero-defect acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination. The destination for delivery and marking is DLA LMP Zone 1, Building 552 North, 7th Street Avenue, Texarkana, TX 75507-5000, with shipping required via the fastest traceable means—parcel post is prohibited. The government use identifier, project code, and point of contact details are included for administrative tracking, and the required delivery date is July 24, 2026. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, and the unit of issue is the individual unit (EA). The buyer is APTIV SERVICES 3 (US), LLC, and the purchasing request number is 7017622935. All documentation must align with DLA procedures, and the supplier must ensure correct marking, packaging, and compliance with federal procurement standards.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

PARTS KIT, FASTENER

Solicitation # SPE4A7-26-Q-0923

The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

ACCUMULATOR, HYDRAUL

Solicitation # SPE4A7-26-Q-0917

The contract pertains to the procurement of four hydraulic accumulators with NSN 1650-01-558-4800 under solicitation SPE4A7-26-Q-0917, with a response deadline of August 10, 2026, and a delivery requirement of 200 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export control under ITAR or EAR, meaning any disclosure of technical data to foreign persons, including foreign nationals within the United States, requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to such controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on handling export-controlled technical data and received formal approval from the DLA controlling authority. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The contracting activity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen as the primary point of contact.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 19 hours ago

DEADLINE

PANEL ASSEMBLY, ELEV

Solicitation # SPE4A7-26-Q-0883

The contract specifies the procurement of three PANEL ASSEMBLY, ELEV units under solicitation SPE4A7-26-Q-0883, with a delivery timeline of 210 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. The contract incorporates multiple DLA-specific requirements including packaging standards, tailored quality controls, configuration change management, inspection at origin, removal of government identification from non-accepted items, and export control of technical data subject to ITAR or EAR regulations. Disclosure of controlled technical data to foreign persons, regardless of location or citizenship, is strictly prohibited without prior authorization, and only contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal approval may access such data. The item is identified by NSN 1560-00-766-6241, and contract administration is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed designated as the primary point of contact.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A7-26-T-599V

This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, identified by NSN 5970-00-612-8492 and sold in units of 1 RO equaling 108 feet. The item is classified as a commercial item and must be manufactured in compliance with qualified products list QPL-19166-30 revision 30. Strict packaging requirements under MIL-STD-2073-1E and MIL-STD-129 apply, including special marking code 33 for Type II shelf life identification. The tape has a maximum shelf life of five years when stored between 50°F and 80°F with humidity below 75%, but compliance with RS001 mandates a non-extendable 12-month shelf life from manufacture, regardless of storage conditions. The material is designated as hazardous with HMIC code P, necessitating submission of a complete Safety Data Sheet package including warning labels and the required transmittal form to dscrchempol@dla.mil. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted in the sample unless otherwise stated, and verification levels for attributes are prescribed. All deliveries must be shipped via traceable freight means, not parcel post, to specified military addresses in Virginia Beach, Oak Harbor, and Norfolk. The contract includes four separate CLINs totaling six ROs with delivery due between June and July 2026, all subject to origin inspection and acceptance with no quantity variance allowed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-599Z

This contract is for the procurement of 97 units of a resilient weapon system mount, identified by NSN 5342-01-159-6456 and part number 12293273-6, under solicitation SPE4A7-26-T-599Z. The item is classified as a critical application and Type I shelf-life item with a non-extendable shelf life of 60 months, requiring at least 85% of its shelf life to remain upon receipt by the first government activity. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including proper labeling per MIL-STD-129 with special marking code 32 for Type I shelf life. The product must be palletized and shipped FOB origin, with inspection and acceptance occurring at the point of manufacture. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must be verified at level VII with an AQL of 0.1. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. Delivery is due within 171 days of award, with an original required delivery date of April 21, 2027, and the item must be shipped to DDSP New Cumberland Facility in Pennsylvania. The unit price is $97.00 per each, totaling $9,409.00, and procurement is governed under NAICS code 332312 by the Department of Defense’s ASC Supplier Oper AE and AF Division.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600D

This contract specifies the procurement of a LATCH, VALVE with NSN 5342-01-193-7756 and part number S4127, for a quantity of 13 units, delivered FOB origin within 149 days of contract award, with no variance allowed in quantity. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific preservation methods, packaging materials, and unit container types. Mercury or mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, or weapons systems, and even then, portable devices must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or a comparable zero-defect sampling plan, with verification levels and AQLs assigned to critical, major, and minor attributes; unspecified attributes are treated as major. Acceptance occurs at the destination under inspection at the receiving warehouse, and non-conforming items must have government identification removed prior to return. The item must be palletized as directed by DLA packaging requirements, and shipping is directed to the DLA Distribution San Joaquin facility in Tracy, CA. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation issue date, and all compliance obligations are binding under the terms of SPE4A7-26-T-600D.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE