Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Gasket Manufacturing

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the precise manufacturing of a critical application gasket to meet stringent technical specifications, including the use of a designated material composition identified as H.B. Fuller 81702 with part number FCA25751, adherence to strict dimensional tolerances, and full compliance with applicable military standards. The gasket is intended for use in high-performance environments where reliability and precision are essential, and all production must align with the defined technical requirements to ensure operational integrity. Issued as a subcontract under the NAICS code 332996 by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization, the opportunity is open for response until August 14, 2026, with the work to be performed at a specified location in Jacksonville, Florida, zip code 32212-0103. The solicitation, accessible via the DIBBS platform, does not specify a set-aside type, and all interested parties must submit proposals before the deadline to be considered for award.

General Info

Manufacture gasket using H.B. Fuller 81702 per military standards for Jacksonville, Florida, by August 14, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a critical application gasket per technical specifications, including material composition (H.B. Fuller 81702 P/N FCA25751), dimensional tolerances, and compliance with military standards.

Similar Contracts

Same NAICS industry code

Manufacturing of Fluid Filter ElementsThe contract is for the manufacturing of fluid filter elements with part number 4268224 and NSN 2940-01-670-6510, requiring full compliance with military specifications throughout all phases including material sourcing, fabrication, testing, and packaging. The work must be performed by a small business under a Total Small Business Set-Aside, as defined by FAR 19.5, with the NAICS code 332996 indicating classification under Other Miscellaneous Fabricated Metal Product Manufacturing. All production activities must adhere to the stringent quality and performance standards mandated by the Department of Defense, with the Strategic Acquisition Program Directorate overseeing the requirement. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and is structured as a subcontract opportunity. The place of performance and exact location details are unspecified, but the work is expected to support defense logistics and readiness across the military’s fluid system requirements. The contract will be managed through the DIBBS system, accessible via the provided link, and all submissions must meet the technical and commercial criteria established in the request, ensuring full traceability and certification of materials and processes to satisfy military-grade reliability.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

Supply of Raw Materials or SubcomponentsThe contract seeks the supply of raw metals, alloys, or off-the-shelf mechanical subcomponents that must fully comply with military and ASTM specifications for use in final assembly processes. These materials and components are intended for defense-related applications and must meet strict quality and performance standards to ensure compatibility and reliability in critical systems. The solicitation is open for bids through a subcontracting arrangement under NAICS code 332996, with responses due by September 3, 2026, and was posted on August 3, 2026. The requirement is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and performance is expected to align with federal defense procurement protocols, though no specific location for delivery is identified. There is no set-aside designation applied to this opportunity, meaning all eligible suppliers may compete. Bidders must ensure their offerings meet all technical requirements outlined in the associated military and ASTM standards and are prepared to support integration into larger military systems. The full solicitation details can be accessed through the provided DIBBS link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Precision Gasket Manufacturing (Critical Application)This contract calls for the manufacture of a high-specification gasket identified by Boeing part number 458-52506-1 and National Stock Number 5330012564500, with strict adherence to military packaging and hazardous material labeling requirements to ensure compatibility with defense supply chain protocols. The component is intended for critical application, demanding precision engineering and material compliance to meet exacting performance and safety standards expected in military aerospace environments. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated by the Software and Business Administration, and classified under NAICS code 332996 for other fabricated metal product manufacturing. The contract was posted on August 3, 2026, with responses due by August 18, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with no specified location for performance beyond the broader defense procurement framework.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M3-26-Q-0166

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-5974

NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

COUPLING HALF, QUICK

Solicitation # SPE7M3-26-T-7642

The contract is for a coupling half, quick disconnect part identified by NSN 4730-01-383-5211 and manufacturer part number 24393-600 from Hydraulics International, Inc. A total quantity of 28 units is required, each priced at $28.00, with a total contract value of $784.00. Delivery is scheduled to occur within 168 days from the contract award, with FOB origin terms and a strict zero percent quantity variance. Inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which take precedent over other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging guidelines, with palletization following specified protocols. No Class I ozone-depleting chemicals are permitted under any circumstances, and substitute chemicals require prior approval unless explicitly authorized by the specification. The required delivery date is March 2, 2027, with a need ship date of January 19, 2027. The item is to be delivered to the DLA Distribution center in New Cumberland, Pennsylvania, and transportation must follow DLAD PROC NOTES C19 and C20. The solicitation number is SPE7M3-26-T-7642, issued under a federal procurement with NAICS code 332996, and the primary point of contact is William Cain of the Fluid Handling Division.

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

ADAPTER, STRAIGHT, FL

Solicitation # SPE7M3-26-T-7812

The contract specifies the procurement of a straight flange-to-tube adapter with part number S1E10204 ITEM 3 and S2C10134-4MF from VACCO INDUSTRIES, identified by NSN 4730014763684. One unit is required to be delivered within 20 days of contract award with FOB origin terms, and the item is classified as a critical application item subject to stringent quality and handling requirements. All supplies must comply with DLA packaging standards per RP001 and MIL-STD-2073-1E for packaging, with marking conforming to MIL-STD-129 and no special marking codes applied. Mercury and mercury compounds are strictly prohibited from intentional addition or direct contact with the hardware except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The delivery is addressed to USS HYMAN G RICKOVER in Groton, CT, with shipment required via the fastest traceable method—parcel post is explicitly forbidden. The contract is governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect as of the solicitation issue date controlling compliance. The unit of issue is each, with zero variance allowed in quantity, inspection and acceptance occur at destination, and the contract number is SPE7M3-26-T-7812 with a required delivery date of July 23, 2026.

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-7670

The contract is for the procurement of CUP, GREASE with NSN 4730-99-024-6944, under solicitation SPE7M3-26-T-7670, issued as a Women-Owned Small Business Set-Aside by the Department of Defense’s Fluid Handling Division. A total of 25 units are required to be delivered FOB origin within 168 days of award, with zero tolerance for quantity variance. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including prescribed methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and all units must be shipped using the designated parcel post address. The contract strictly prohibits the intentional use or direct contact of mercury or mercury-containing compounds, except for specific functional applications such as certain batteries, lamps, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely banned, overriding any conflicting specification requirements unless explicitly authorized. Only approved substitute chemicals may be used, subject to prior approval. The item is designated a critical application and includes specific part numbers from Mawdsleys Ltd and Ward Leonard CT LLC. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contract’s point of contact is William Cain, with response due by August 3, 2026, and an original required delivery date of March 13, 2027.

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M0-26-T-027E

The contract pertains to the procurement of one unit of a metal tube assembly with NSN 4710-01-541-3146 and purchase request number 7017707031, under solicitation SPE7M0-26-T-027E. Delivery is required within five days of award, with FOB origin terms and no quantity variance permitted. Inspection and acceptance occur at the destination, and the item must be packaged in compliance with ASTM D3951, while adhering to MIL-STD-129 for marking and labeling. All packaging and labeling must follow DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. The unit of issue is each, and palletization must conform to DLA packaging directives. The shipment must be sent via traceable freight methods—parcel post is prohibited—and delivered to the specified freight address in Conneaut Lake, Pennsylvania, with a mandatory military shipping identifier. The required delivery date is July 31, 2026, and the contract includes specific government-only fields for tracking and logistics control. The supplier, Grove U.S. LLC, is obligated to meet all technical and quality standards referenced through DLA’s online master list, with revisions tied to the solicitation issue date controlling compliance.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-7590

The contract is for the procurement of 27 units of a saddle, hose, identified by NSN 4730-00-900-8536, manufactured from aluminum alloy with a 7-inch nominal size, six bolt holes, and Type B configuration, with a specific modification to the O-ring groove width at Detail B of Drawing 1385957 Sheet 1, which must be 0.380 inches instead of the standard 0.590 inches. The item is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048 and restricted access to only DLA contractors who hold US/Canada Joint Certification Program certification, have completed required training on handling export-controlled technical data, and have received formal approval from DLA. The acquisition is structured as a total small business set-aside under FAR 19.5 with a NAICS code of 332996, solicited under SPE7M3-26-T-7590 with responses due by August 3, 2026, and performance required within 183 days of award, culminating in delivery to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581 under FOB Origin terms. Items must be packaged per MIL-STD-2073-1E and RP001 DLA Packaging Requirements, preserved using Method 10 with no special preservation material, cleaned and dried, marked per MIL-STD-129 with Code 39 or PDF417 barcodes, and labeled with the NSN, CAGE code, and contract information. Inspection and acceptance occur at the destination by the Government per FAR 52.246-2, and all items must meet applicable technical and quality requirements referenced in the DLA Master List. The contract incorporates a full suite of FAR and DFARS clauses, including cybersecurity requirements under NIST SP 800-171, safeguarding of covered defense information, combating trafficking in persons, employment eligibility verification, sustainable products, hazardous material handling, prohibition of hexavalent chromium, and electronic payment submission through WAWF. Contractor compliance with CMMC Level 2 certification is required, and all subcontracting activities must adhere to the commercial items subcontracting

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

PLUG, PIPE, MAGNETIC

Solicitation # SPE7M3-26-T-7022

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7M0-26-T-011K

The contract is for the procurement of 12 units of a sediment strainer with NSN 4730-01-429-9614 and part number F145C001, supplied by JERED LLC. The item must be delivered within five days to the General Depot of Naval Supplies in Kaohsiung, Taiwan, with delivery terms set at FOB origin and no tolerance for quantity variance. The product is subject to strict packaging requirements aligned with MIL-STD-2073-1E and labeling per MIL-STD-129, with specific packaging codes and methods defined, including dry storage and containment standards. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds, except for approved functional uses such as in batteries, fluorescent lights, sensors, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality obligations are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with the applicable revision determined by the solicitation or award date. The item is to be shipped under the solicitation SPE7M0-26-T-011K with a required delivery date of July 21, 2026, and includes detailed government tracking codes for logistics, distribution, and accountability purposes.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Hazardous Materials Compliance and LabelingThis contract requires the provision of globally harmonized system compliant safety data sheets, hazard warning labels, and MIL-STD-129 marking for hazardous materials used in shipment and storage, ensuring full alignment with Defense Federal Acquisition Regulation Supplement and Defense Logistics Agency mandates. All deliverables must meet stringent military standards for labeling and documentation to support safe handling, transport, and long-term storage of hazardous commodities within DOD supply chains. The work is performance-based and tied to a specific location in Jacksonville with a ZIP code of 32212-0103, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. It is structured as a subcontract with a response deadline of August 14, 2026, and was posted on August 3, 2026. Compliance with DFARS and DLA requirements is mandatory, and all materials must be accurately marked and documented for traceability and safety throughout the logistics lifecycle.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Military-Grade Packaging and PalletizationThe contract requires the delivery of packaging gaskets that meet stringent military specifications, specifically MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring they are sealed in waterproof, greaseproof, and UV-resistant bags to withstand harsh environmental conditions. These gaskets must be precisely packaged to maintain integrity during storage and transit, with strict adherence to material and sealing standards defined by the military. All shipments must also be palletized in accordance with DLA RP001 logistics standards, ensuring uniform size, weight distribution, labeling, and secure strapping for efficient handling within defense supply chains. The packaging and palletizing process must support seamless integration into military logistics systems and enable rapid deployment. This subcontract is issued under NAICS code 323113, indicating it relates to printing and related support activities, though the core scope focuses on specialized packaging and material handling for defense components. The opportunity was posted on August 3, 2026, with bids due by August 14, 2026, and performance is expected to be delivered to Jacksonville, Florida, at ZIP code 32212-0103. The contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support office, highlighting its importance to vehicle and equipment readiness. Compliance with all technical, logistical, and quality requirements is mandatory, and failure to meet the specified standards could result in rejection of deliverables.

Commercial Screen Printing

POSTED

about 16 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires implementation of cybersecurity measures to protect Covered Defense Information in accordance with NIST Special Publication 800-171, ensuring all systems handling such data meet strict federal security standards. Compliance includes adopting required security controls, maintaining documentation of implementation, and establishing processes to detect, report, and respond to cyber incidents as mandated by DFARS clauses. Failure to meet these requirements may result in contract non-compliance and potential penalties. The work is to be performed in San Diego, California, with a response deadline of August 14, 2026, and is classified as a subcontract under NAICS code 541512, indicating it involves computer systems design services for the Department of Defense. The contractor must ensure all cyber incident reporting procedures are operational and aligned with DoD expectations, with no flexibility in meeting the technical and procedural obligations outlined.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance and Documentation ServicesThe contract requires the provision of hazard warning labels, Safety Data Sheets, and regulatory compliance documentation for all hazardous components included in a parts kit, ensuring adherence to applicable safety and environmental regulations. The work is scoped for a subcontract under the Department of Defense, with the place of performance specified as San Diego, California, 92136-3581, and the NAICS code 541690 indicates it falls under other professional, scientific, and technical services, specifically environmental and compliance-related consulting. All deliverables must accurately reflect the chemical and physical hazards of the materials in the kit and comply with international, federal, and defense-specific standards for labeling and documentation. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and is administered through the Defense Logistics Agency’s DIBBS system. The contracting entity, LAND SUPPLIER OPNS VEHICLE SPT, operates within the broader Department of Defense supply chain framework, emphasizing the critical need for precise, timely, and legally compliant documentation to support safe handling, storage, transport, and use of hazardous materials in military equipment. Failure to provide complete and correct documentation may result in rejection of the parts kit and non-compliance penalties, making accuracy and regulatory alignment the primary focus of the subcontractor’s deliverables.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Seal Replacement Parts Kit Manufacturing and SupplyThe contract entails the manufacture and delivery of a seal replacement parts kit identified by NSN 5330-01-698-6493, requiring full compliance with Department of Defense technical specifications, packaging requirements, and material safety standards. All products must be produced and assembled to meet stringent military-grade criteria to ensure performance, durability, and safety in operational environments. The work is to be performed in San Diego, California, with delivery scheduled to support Land Supplier Operations Vehicle Support initiatives under the Department of Defense. This is a subcontract opportunity posted on August 3, 2026, with a response deadline of August 14, 2026, and is categorized under NAICS code 332998 for other fabricated metal product manufacturing. The procurement is managed by the Department of Defense through its Land Supplier Operations Vehicle Support organization, and the place of performance is fixed at the specified San Diego location. All bidders must align with DLA’s compliance frameworks and ensure that both the parts and their packaging meet federal defense logistics requirements without exception.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 16 hours ago

DEADLINE

Manufacture and Supply of Retainer, Packing (NSN: 5330007580791)The contract requires the manufacture and delivery of 43 units of a military-spec retainer, packing component identified by NSN 5330007580791, with strict adherence to federal packaging and marking regulations, as well as domestic manufacturing requirements under the Berry Amendment. All work must be performed in the United States to ensure compliance with defense procurement standards for domestically produced supplies. The item is intended for use by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance located in Texarkana, Texas, 75507-5000. The solicitation is designated as a subcontract opportunity, posted on August 3, 2026, with responses due by August 14, 2026, and is governed under NAICS code 339991 for other miscellaneous manufacturing. Potential bidders must meet all federal compliance obligations and ensure full traceability and documentation of materials and production processes.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Gasket Supply for Defense ApplicationsContract calls for the supply of 182 specialized asbestos-free gaskets designated by NSN 5330015162090, engineered to meet military specifications for use in defense and naval systems. Each unit must be manufactured, packaged, and labeled in full compliance with federal standards for hazardous materials, including the submission of complete safety data sheets and military-compliant packaging to ensure safe handling and transportation. The gaskets are intended for performance at a designated location in Tracy, California, with a zip code of 95304-5000, and the contract is structured as a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support. The solicitation, identified by the DIBBS link and posted on August 3, 2026, requires responses to be submitted no later than August 14, 2026, with NAICS code 332994 indicating the classification within miscellaneous fabricated metal product manufacturing. All deliverables must align precisely with defense procurement requirements to ensure seamless integration into operational platforms.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-127E

This contract is for the procurement of a gasket, identified by NSN 5330-01-258-2599 and part number 962M, with a quantity of 115 units, to be delivered FOB origin within 110 days of contract award. The item is designated as a critical application component and must comply strictly with DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for procurement packaging standards. The supply must be sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor deliveries, foreign military sales, and stock shipments. The contract prohibits intentional addition of mercury or mercury-containing compounds except in specific functional applications like batteries, fluorescent lamps, sensors, and weapon systems, with additional containment and shock-proof requirements for portable items, as defined by NAVSEA 5100-003D. Asbestos is strictly forbidden under FED-STD-313 definitions. Delivery must be made to the DLA Distribution center in New Cumberland, Pennsylvania, following all hazardous material shipping protocols outlined in DLAD Proc Note C19 and C20. The unit price is $115.00 per unit, totaling $13,225.00, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must include the specified packing methods and containment codes. The solicitation number is SPE7L3-26-T-127E, with a response deadline of August 3, 2026, and a need ship date of November 22, 2026, and original delivery completion by December 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-125S

The contract pertains to the procurement of a gasket with NSN 5330-01-479-9408 and part number 032757, requiring a quantity of 28 units to be delivered FOB origin within 106 days, with no variance allowed in quantity. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the item is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV exposure. Marking follows MIL-STD-129 with the special instruction “Do not bend,” and palletization adheres to DLA packaging standards. The item is designated as a critical application item, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L3-26-T-125S, with a response deadline of August 3, 2026, and the required ship date is November 18, 2026, for an original delivery requirement of December 20, 2026. Unit of issue is each, priced at $28.00 per unit, with a total contract value of $784. The point of contact is Susan Diamond, reachable at DLA email and phone provided.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

WHEEL ASSEMBLY, PNEUMAT

Solicitation # SPE7L3-26-T-146B

Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

INSTALLATION KIT, VEHIC

Solicitation # SPE7L3-26-T-124W

This contract is for the supply of an Installation Kit, Vehicular Equipment identified by NSN 2510-01-673-1162 and part number 0385000112-00, with a quantity of 15 units to be delivered FOB origin under solicitation SPE7L3-26-T-124W. The delivery deadline is 177 days from contract award, with an original required delivery date of October 14, 2026, and a needed ship date of January 28, 2027. Each unit is priced at $15.00, totaling a contract value of $225.00, with zero tolerance for quantity variance. All items must comply with strict packaging standards outlined in MIL-STD-2073-1E Appendix D for kits, and marking must adhere to MIL-STD-129. The kit is designated as a critical application item, and the use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements unless explicitly authorized. Packaging must follow DLA-specific requirements, and the delivery destination is the Central Receiving Warehouse at DLA Distribution Barstow, California. Preservation and packaging methods, including wrap and cushioning materials, are to be specified as ZZ per the contract’s packaging data. The item must be shipped to the provided postal address with no deviations allowed, and all transportation logistics must follow referenced DLAD procedures. The contract is issued under DLA’s authorized unit of issue, and technical and quality requirements linked via R or I numbers are governed by the DLA Master List effective on the solicitation or award date, depending on procurement type.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE7L3-26-Q-1247

The contract is for the procurement of 47 units of a door, hatch, or vehicle component manufactured through a metal casting process, requiring specialized tooling for production. The item is classified as a ballistic item, necessitating a first article test and a Certificate of Quality Conformance in accordance with SQAP013408919. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to DLA packaging standards and strict prohibitions against the use of Class I ozone-depleting chemicals, which override any conflicting specification requirements; alternative chemicals must be submitted for approval unless explicitly authorized. This is a total small business set-aside under NAICS code 336211 with full and open competition among qualified small businesses. The contract involves export-controlled technical data governed by either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved authorization from DLA. Packaging and handling must comply with DLA standards, and any non-accepted supplies must have government identification removed. The delivery timeline is 184 days after order, with the solicitation closing on August 18, 2026, and the point of contact for inquiries is McKenzie Biniker of the Department of Defense’s Land Supplier Operations Vehicle Support.

Motor Vehicle Body Manufacturing

POSTED

about 16 hours ago

DEADLINE