Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Mechanical Fabrication (CLIK/sUPI Compliant)

Active

Federal

Response Deadline10/01/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Precision Mechanical Fabrication involves the manufacture of primary housings and structural components for US Army Shank 2.0 projects. The work focuses on precision machining and fabrication of components that must integrate with Picatinny Common Launcher Interface Kit or small Universal Payload Interface design standards. To meet strict military payload interface tolerances, the provider must utilize high-precision CNC machinery and maintain full ITAR compliance. The contract is managed by the Department of Defense under the W6QK Acc-Ri-Picatinny agency, with performance taking place at Picatinny Arsenal. The scope of work concludes with the delivery of finished mechanical housings and interfaces. The solicitation was posted on September 1, 2026, with a response deadline of October 1, 2026, falling under NAICS code 332710.

General Info

Precision mechanical fabrication of US Army Shank 2.0 housings and interfaces at Picatinny Arsenal.

Agency

Department Of Defense → W6QK Acc-Ri-PicatinnyView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

Picatinny Arsenal, NJ, 07806, USA

Set-Aside

NONE

Documents

This scope was carved out of W15QKN-26-X-1CFG.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 1

subcontract

Response DeadlineOct 1

Submission deadline

Response Deadline

10/01/2026, 09:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Ri-Picatinny

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures primary housings and structural components for prime contractors on US Army Shank 2.0 projects. Performs precision machining and fabrication of components integrating with Picatinny CLIK (Common Launcher Interface Kit) or small Universal Payload Interface (sUPI) design standards. Utilizes high-precision CNC machinery to meet strict military payload interface tolerances. Requires ITAR compliance. Delivers finished mechanical housings and interfaces.

Similar Contracts

Same NAICS industry code

26-SIMACQ-E70-0003 Lifting Cap

Solicitation # N6339426Q4070

Solicitation N6339426Q4070, issued by the Naval Surface Warfare Center, Port Hueneme Division, seeks a firm-fixed-price quote for one Lifting Cap Certification Weldment (Part Number 8902539). This item serves as a test fixture for the Missile Exhaust Containment Structure to support periodic weight testing for the Littoral Combat Ship Surface Warfare Mission Package. The requirement includes the provision of necessary transportation fixtures or crates for delivery to Port Hueneme, California, with an estimated final delivery timeline of 60 calendar days from the date of award receipt. Technical specifications require adherence to various military standards, including MIL-STD-130 for marking, MIL-DTL-15024 for identification plates, and specific epoxy-polyamide coating systems. Recent amendments have updated the statement of work to include drawing 8794830 REV B and parts list PL8794830 REV B, while extending the final response deadline to September 10, 2026. The contract will be awarded to the lowest-priced, technically acceptable offer. Evaluation factors include total price, technical capability, past performance, and a mandatory requirement for a verified CMMC Level 1 (Self) status in the Supplier Performance Risk System. Offerors must provide an active CAGE code and an approved DD Form 2345 to access controlled unclassified information. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with the Buy American program. While some documentation suggests a small business set-aside, other sections indicate it is not a set-aside; however, the metadata lists it as a total small business set-aside under NAICS code 332710.

Commanding Officer

POSTED

about 7 hours ago

DEADLINE

DRAWER ASSEMBLY,AIR — 1680016616785 — SPRPA126QZB94

Solicitation # SPRPA126QZB94

The Department of the Navy, through the DLA Aviation office in Philadelphia, has issued solicitation SPRPA126QZB94 for the procurement of air drawer assemblies. This request was posted on September 4, 2026, with a response deadline set for September 14, 2026. The contract requires a specific vendor part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40. Performance of the contract is designated for Philadelphia, Pennsylvania.

Pa DLA Aviation At Philadelphia

POSTED

about 15 hours ago

DEADLINE

Fabrication of Platform Braces (NSN 1730-00-056-4082)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE4A5-26-T-405V

This solicitation from the Department of Defense, specifically the ASC Supplier OEM Division, is for the procurement of one receptacle connector under part number 4920-01-565-4267. The contract requires delivery within 79 days after the order is placed. Compliance with DLA master technical and quality requirements is mandatory, including specific standards for packaging, the removal of government identification from non-accepted supplies, and physical item marking. Quality assurance must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. The contract imposes strict security and legal obligations, including CMMC Level 2 certification and adherence to export control regulations under ITAR and EAR. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Item Unique Identification is not required for this specific request.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

STRAP, TIEDOWN, ELECT

Solicitation # SPE4A7-26-T-714W

This contract is for the procurement of three electrical tiedown straps, identified by NSN 5975-01-625-9229 and associated with Howell Laboratories Inc part numbers 8389-2-9 and 8708-G501. The order is issued by the Department of Defense under solicitation SPE4A7-26-T-714W, with a required delivery date of August 28, 2026, and a delivery timeframe of 20 days after the order. The items are to be shipped FOB Origin to the USS America LHA 6. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required and specified by NAVSEA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BOARD, AIRCRAFT EQUI

Solicitation # SPE4A5-26-T-384U

Solicitation SPE4A5-26-T-384U, issued by DLA Aviation ASC Supplier Oper OEM Division, is a request for quotations for two aircraft equipment boards, identified by NSN 4920-01-522-4417. The requirement specifies a delivery period of 54 days after receipt of order, with an original required delivery date of August 24, 2026. Shipping is designated as FOB Origin under the First Destination Transportation program, with the delivery destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and palletization per RP001, with DLA Master List of Technical and Quality Requirements taking precedence. Marking and labeling must comply with MIL-STD-129. Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances if MIL-STD-105/ASQ Z1.4 is utilized. The solicitation incorporates various federal regulations, including the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity requirements, and the Hazard Communication Standard for any applicable hazardous materials. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by September 1, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A0-26-T-4677

This solicitation from the Department of Defense Aviation Supply Chain ESOC Buys is for the procurement of one cable assembly, identified by NSN 4920-01-565-4272. The contract requires delivery within five days after receipt of order and is performed at Cannon AFB. The procurement is subject to specific DLA technical and quality requirements, including strict packaging standards and the removal of government identification from non-accepted supplies. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, with specific AQLs assigned to critical, major, and minor attributes. The contract includes stringent security and legal mandates, including CMMC Level 2 certification, Covered Defense Information protocols, and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Drive Shaft Machining and Alignment

Base BOSTON(00024)

POSTED

DEADLINE

Solicitation # PR466526

The Manufacturing Science Division at Oak Ridge National Laboratory, under the Department of Energy, is soliciting bids for the procurement of metal fabricated mounting pads. This requirement is categorized under NAICS code 332710 and is managed by the ORNL UT-Battelle LLC-DOE Contractor. Interested parties must coordinate with the primary point of contact, Taylor Hunt, to undergo the Export Control Screening process, which is required to access the detailed drawings, bill of materials, and pricing sheets. The solicitation, identified as PR466526, was posted on September 3, 2026, with a response deadline of September 10, 2026. The place of performance is located in Oak Ridge, Tennessee. All inquiries and submissions should be directed to the designated procurement officer to ensure compliance with security and screening protocols.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Shaft and Prop repair

Solicitation # 70Z02426Q0000324

The United States Coast Guard is seeking quotes for shaft and propeller repairs on two boats located at USCG Base Boston in Massachusetts. This procurement is designated as a small business set-aside under NAICS code 332710. Interested vendors must submit their quotes via email to the contracting officer by 12:00pm EST on September 9, 2026. A site visit is highly recommended to coordinate the requirements of the statement of work. The government will award a single firm-fixed price task order based on a best-value tradeoff process. Evaluation is based on three factors in descending order of importance: technical experience, relevant experience, and price. While price is a consideration, the government prioritizes technical and relevant experience when determining the best value for the award.

Base BOSTON(00024)

POSTED

DEADLINE

17--PISTONS,MATCHED SE,

Solicitation # SPRPA126RYD37

This presolicitation notice from the Department of Defense, specifically the DLA Aviation office in Philadelphia, concerns the procurement of one set of matched pistons under solicitation number SPRPA126RYD37. The requirement is identified by NSN 7R-1710-014959307-EY and specifies delivery as FOB Origin. Due to the need for specialized engineering source approval, unique design capabilities, and proprietary manufacturing knowledge, the government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1 to ensure part quality. While the government intends to use a single-source procurement, interested parties may submit proposals, quotations, or capability statements within 45 days of the notice to demonstrate their ability to meet the requirement. Any alternate source must undergo a qualification process approved by the cognizant government engineering activity. Technical specifications and standards can be accessed via the DODSSP or ASSIST-Online, though specific patterns and drawings are not stocked at the DODSSP.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

Supplier of Plain Encased Seals (NSN 5330218774350)

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Ri-Picatinny

Same awarding agency

Repair Loading Dock Concrete & Install New Handrail - Parkersburg, WV046

Solicitation # W15QKN-26-Q-A171

The Army Contracting Command Rock Island at Fort Dix, acting for the 99th Readiness Division, is seeking a contractor for a firm-fixed-price construction project at the PFC Roy M. Reynolds USARC/BMA 102-1 in Parkersburg, West Virginia. The scope of work involves repairing cracked and frost-damaged concrete on a loading dock and installing a new handrail to ensure safety compliance. Key tasks include pressure washing the loading ramp and correcting concrete damage caused by frost heave. The project is designated as a total small business set-aside under NAICS code 236220. The performance period for the work is 120 calendar days from the issuance of the Notice to Proceed. All work must be performed according to the Specifications of Work and comply with all local, state, and federal regulations. Inspection and acceptance will occur at the destination in Parkersburg, West Virginia, with the government serving as the responsible party for final acceptance. The primary point of contact for this requirement is Contract Specialist James Clark.

Commercial and Institutional Building Construction

POSTED

about 7 hours ago

DEADLINE

CSS98822 - Extended MEP Lot Repair - Virginia Beach, VA

Solicitation # W15QKN-26-Q-A114

Solicitation W15QKN-26-Q-A114 is a combined procurement opportunity issued by the Department of Defense, specifically the W6QK Acc-Ri-Picatinny office, for extended MEP lot repair services located in Virginia Beach, Virginia. This project falls under NAICS code 238990 and is designated as a total small business set-aside. The solicitation was posted on September 4, 2026, with a response deadline of September 18, 2026, at 3:00 PM. Interested parties can coordinate with primary point of contact Ronald M. Stinson or secondary contact Katie Lyons. Full documentation and submission details are available through the PIEE website.

All Other Specialty Trade Contractors

POSTED

about 7 hours ago

DEADLINE

Repair Fence and Expand MEP Lot, PFC Roy M. Reynolds USARC, Parkersburg, WV

Solicitation # W15QKN26QA182

Solicitation W15QKN26QA182 is a 100% small business set-aside for a firm-fixed-price contract to repair the perimeter fence and expand the Military Equipment Parking (MEP) lot at the PFC Roy M. Reynolds USARC in Parkersburg, West Virginia. The scope of work includes 4,150 square feet of MEP expansion, 10,400 square feet of parallel excavation, approximately 140 linear feet of saw cutting, fence dismantling, post replacement, gate salvage, and grounding upgrades. All work must adhere to the Specifications of Work dated 19 March 2026, as well as Unified Facilities Guide Specifications and Unified Facilities Criteria. The performance period is exactly 120 calendar days from the receipt of a written Notice to Proceed, with work hours restricted to Monday through Friday, 07:30 AM to 16:00 PM. The acquisition follows a Lowest Price Technically Acceptable (LPTA) evaluation methodology, requiring a two-volume proposal: a technical narrative limited to 10 pages and a detailed price proposal using a specific cost breakdown form. Technical acceptability depends on a feasible execution plan, commitment to specific material standards such as new vinyl-coated steel wire ties, and compliance with FAR 52.219-14, requiring the prime contractor to perform at least 25% of the labor cost. Financial requirements include a bid guarantee of 20% of the bid price or 3 million dollars, whichever is less, and performance and payment bonds equal to 100% of the contract price submitted within ten days of award. Labor rates must strictly comply with Davis-Bacon Wage Determination WV20260051. Following Amendment 0001, the submission deadline for quotes is 12:00 PM EST on 15 September 2026.

All Other Specialty Trade Contractors

POSTED

about 7 hours ago

DEADLINE

CSS 89222 - Reseal and Stripe POV Parking Lot, Brockton MA

Solicitation # W15QKN26QA173

Solicitation W15QKN26QA173 is a firm fixed price construction project for the U.S. Army's 99th Readiness Division to reseal and stripe the POV parking lot at CPL Gordon M. Craig USARC in Brockton, Massachusetts. The scope of work includes repairing cracks, resealing asphalt surfaces, and restriping parking lot lines using US Department of Transportation Highway Yellow paint. The project is a 100 percent small business set-aside with an estimated value between 250,000 and 500,000 dollars. The mandatory delivery schedule is 90 calendar days after the notice to proceed, with a specified period of performance from September 28, 2026, to December 28, 2026. Award will be based on the Lowest Price Technically Acceptable (LPTA) proposal. Eligible offerors must submit a technical proposal detailing their approach to the specifications of work, a proposed schedule, and subcontractor information. The closing date for proposal submission has been extended to September 10, 2026, at 2:00pm EDT. Key requirements include compliance with the Davis-Bacon Act for prevailing wages, the provision of performance and payment bonds if the contract exceeds 150,000 dollars, and the submission of a quality control program per FAR 52.246-12. Liquidated damages for delays are set at 100 dollars per calendar day. Invoicing must be processed electronically via Wide Area WorkFlow.

Commercial and Institutional Building Construction

POSTED

DEADLINE

CSS 99154 Upgrade Existing Lighting to LED

Solicitation # W15QKN26RA053

The Army Contracting Command – New Jersey, acting on behalf of the 99th Readiness Division, is soliciting bids for the Upgrade Existing Lighting to LED project at Fort Meade, Maryland, specifically targeting Training Building 2118, Organizational Maintenance Shop 2121, Storage Building 2119, and the Unheated Storage Building 2122. The project aims to replace all existing lighting with energy-efficient LED technology to enhance operational efficiency, reduce maintenance costs, and improve the learning and working environment across these facilities. The contract is a Small Business Set Aside under NAICS code 238210, reserved exclusively for small businesses, and the work must be completed within 120 calendar days from the Notice to Proceed. The solicitation, identified as W15QKN26RA053 and titled CSS 99154 Upgrade Existing Lighting to LED, was posted on July 28, 2026, with a response deadline of August 27, 2026. The contracting office is located at Picatinny Arsenal, New Jersey, and the primary point of contact for inquiries is Jonathan Krakower, reachable via email and phone.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

CSS 99142 Flooring and Wall Upgrade

Solicitation # W15QKN26RA054

Solicitation W15QKN-26-R-A054 is a combined synopsis and request for proposals for Construction Project CSS 99142, Flooring and Wall Upgrade (DE007) at the Newark AFRC in Newark, Delaware. The project involves the replacement of approximately 18,000 square feet of carpeting with new LVT flooring, painting of walls and door trim, window recaulking, and the installation of protective window film and shades within Building 1 (Training Building) and Building 2 (OMS). The selected contractor will have 180 calendar days from the notice to proceed to complete all tasks. This procurement is a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 236220. The government will award the contract using the lowest price technically acceptable methodology, evaluating proposals based on technical acceptability and price reasonableness without tradeoffs. Requirements include compliance with the Davis-Bacon Act for wage determinations and the provision of performance and payment bonds for proposed prices exceeding 150,000 dollars. Contractors must maintain a quality control system and provide a construction superintendent. Proposals must be submitted via the PIEE Solicitation Module, including a detailed cost breakdown in Microsoft Excel format. All invoicing and payment requests are to be processed through the Wide Area WorkFlow system.

Commercial and Institutional Building Construction

POSTED

DEADLINE

CSS# 94735 - Expand Restrooms (MD013)

Solicitation # W15QKN26QA108

Solicitation W15QKN-26-Q-A108 is a combined synopsis and request for quote for the renovation and capacity expansion of four existing restrooms at the MG Benjamin L. Hunton Memorial USARC in Gaithersburg, Maryland. This project is a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and will be awarded as a firm-fixed-price contract using the lowest price technically acceptable (LPTA) methodology. The scope of work is divided into two phases and includes the demolition of existing fixtures, installation of ADA-compliant commercial-grade plumbing, energy-efficient LED lighting, and moisture-resistant drywall. The period of performance is 240 calendar days from the notice to proceed. The project requires strict adherence to the International Plumbing Code, ANSI, and ASTM standards, with mandatory hydrostatic pressure testing for all new plumbing lines. Contractors must comply with the Davis-Bacon Act for prevailing wage rates in Montgomery County, including specific requirements for paid sick leave and minimum wage. For contracts exceeding 150,000 dollars, performance and payment bonds totaling 100 percent of the contract price are required. Proposals must be submitted via the PIEE Solicitation Module, featuring a detailed cost breakdown in Microsoft Excel format. Following Amendment 0001, the proposal due date has been extended to September 4, 2026, at 10:00 am EDT.

Commercial and Institutional Building Construction

POSTED

DEADLINE

FCCD-ACM-MJ Support Services

Solicitation # W15QKN-26-Q-1CAC

The U.S. Army Combat Capabilities Development Command Armaments Center is conducting market research via a sources sought notice to identify qualified engineering firms capable of providing complete life cycle engineering for various munition systems. The required services encompass the entire development process, including exploratory research, advanced engineering, experimental testing, quality evaluation, and production manufacturing. Selected contractors will provide professionals skilled in system architecture, CAD modeling, finite element analysis, embedded software development, and the creation of technical data packages to support the reliable delivery and sustainment of munition systems. Key responsibilities include performing requirements decomposition, reviewing Engineering Change Proposals, and collaborating with multi-disciplinary teams through Integrated Product Team meetings. Contractors must provide technical advice on project feasibility and risk while maintaining regular communication with project leads and supervisors. This is an informational request for capabilities statements under NAICS code 541330 and is not a formal solicitation for a contract. Interested parties must be registered in the System for Award Management and submit their qualifications to the U.S. Army Contracting Command - Rock Island by October 3, 2026.

Engineering Services

POSTED

DEADLINE

Snow and Ice Removal Services at the Romney USARC 11 Industrial Park Romney, WV 26757-1101

Solicitation # W15QKN26QA179

Solicitation W15QKN26QA179 is a 100% small business set-aside for snow and ice removal services at the Romney USARC located at 11 Industrial Park, Romney, WV. This firm fixed price requirements contract consists of a 12-month base period with four 12-month option periods. The contractor is responsible for providing all personnel, equipment, and supervision to clear parking areas, driveways, gates, sidewalks, and HVAC units, ensuring pavement is plowed bare and sidewalks are cleaned during any three-inch snowfall event. A critical operational requirement is the contractor's ability to arrive on-site and begin work within two hours of notification. The contract emphasizes strict quality control and documentation for payment approval. Contractors must provide time-stamped before-and-after photos of all serviced areas and a monthly checklist signed by the Regional Facilities Operation Specialist or Contracting Officer Representative. Invoices will not be approved without these supporting documents. Additionally, the contractor must adhere to Service Contract Act wage determinations for Hampshire County, West Virginia, and comply with OSHA safety standards, including the prohibition of transporting hazardous waste onto Army property. All quotes must be submitted through PIEE by the September 18, 2026, deadline.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Specialized Materials Supply (Risk Mitigation)The Specialized Materials Supply subcontract, managed by the Department of Defense through W6QK Acc-Ri-Picatinny, focuses on providing raw materials and critical components for prime contractors involved in US Army Shank 2.0 projects. The scope of work involves sourcing specialty alloys and electronics as defined in the Technical Data Package, with a specific emphasis on delivering supply chain stability and risk mitigation strategies to address material scarcity and price volatility. Performance for this contract takes place at Picatinny Arsenal. To be eligible, providers must maintain ITAR compliance and hold supply chain stability certifications. The solicitation was posted on September 1, 2026, with a response deadline of October 1, 2026, falling under NAICS code 325211.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Training Warhead Production (Non-Lethal)This subcontract involves the production of non-lethal training warheads for prime contractors supporting US Army Shank 2.0 projects. The manufacturer is responsible for creating units that maintain the exact form, fit, and function of live warheads, utilizing LED circuitry and weight-matching ballast materials to simulate detonation while replacing lethal payloads. The contract is managed by the Department of Defense through the W6QK Acc-Ri-Picatinny agency, with performance taking place at Picatinny Arsenal. Classified under NAICS code 334418, the opportunity was posted on September 1, 2026, with a response deadline of October 1, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Electronic Initiation Systems (LEEFI/Shock Tube)This subcontract involves the supply and integration of warhead initiation chains for prime contractors supporting US Army Shank 2.0 projects. The scope of work focuses on integrating Low Energy Exploding Foil Initiator or shock tube initiation chains with High Voltage Electronic Safe and Arm Device systems, utilizing specialized high-voltage electronic components and shock tube materials that adhere to military munitions safety standards to deliver functional initiation assemblies. Managed by the Department of Defense through the W6QK Acc-Ri-Picatinny agency, the project is categorized under NAICS code 334418. Performance of the contract will take place at Picatinny Arsenal, with a response deadline set for October 1, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE