Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pressure and Non-Destructive Testing for Critical Safety Valves

Active

Response Deadline12/03/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized pressure testing and non-destructive evaluation services for critical safety valves supporting Navsup Weapon Systems Support Mech projects for the Department of the Navy. The scope of work includes conducting proof pressure tests at 2175 PSIG and seat tightness tests at 600 PSIG, alongside performing non-destructive testing on production welds using X-ray, Ultrasonic, or Dye Penetrant methods. All work is to be performed in Mechanicsburg, Pennsylvania. To execute this contract, the provider must utilize high-pressure hydrostatic rigs and employ certified NDT personnel. The contractor is responsible for delivering all required certifications and certified test reports through the Wide Area Workflow system. The solicitation was posted on November 3, 2026, with a response deadline of December 3, 2026, under NAICS code 541380.

General Info

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QNA48.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE,RELIEF,PRESSU — 4820011392713 — N0010427QNA48

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineDec 3

Submission deadline

Response Deadline

12/03/2026, 09:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs pressure testing and non-destructive evaluation for prime contractors on Navsup Weapon Systems Support Mech projects. Conducts proof pressure tests at 2175 PSIG and seat tightness tests at 600 PSIG. Performs NDT on production welds using X-ray, Ultrasonic, or Dye Penetrant methods. Requires certified NDT personnel and high-pressure hydrostatic rigs. Delivers certified test reports and certifications via WAWF.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Critical Safety Item (CSI) Quality Assurance and SamplingThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing independent testing and quality validation for aerospace projects. The selected contractor will be responsible for executing sampling plans according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Utilizing CMM and spectroscopy equipment, the contractor must validate Critical Safety Item requirements and ensure compliance with DFARS 252.211-7003, with a preference for ISO/IEC 17025 certification. The primary deliverables for this engagement include detailed inspection reports and sampling certificates. The work is categorized under NAICS code 541380 and will be performed in the 78419-5255 zip code area. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Aviation Component Quality Assurance and Testing ServicesThe Aviation Component Quality Assurance and Testing Services subcontract involves providing precision measurement, testing, and quality certification for aircraft duct assemblies. Supporting prime contractors for the Department of Defense DLA Weapons Support aviation supply chain, the selected provider will perform dimensional inspections, pressure and leak testing, and material certification verification. All work must be conducted using RT001 compliant calibrated measuring and test equipment, and the contractor is required to maintain ISO 9001:2015 certification to deliver the necessary inspection reports and test certificates. This opportunity is categorized under NAICS code 541380 and will be performed in Broken Arrow, Oklahoma. Interested parties must respond by November 12, 2026, to support the critical quality assurance needs of the DLA Weapons Support Aviation Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) Services for Aircraft SeatThis subcontract involves providing First Article Testing services for aircraft seats to support prime contractors delivering DLA supply contracts. The scope of work requires conducting safety and performance validation on one unit of Lot/Item 1680-01-699-2124 using specialized testing rigs. The selected provider is responsible for coordinating source inspections and developing a formal FAT Report to document the results. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. All deliverables, including the validated test unit and the completed FAT Report, must be submitted within 90 days. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

Third-Party Inspection and SamplingThis subcontract for Third-Party Inspection and Sampling supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent sampling and inspection of Retainer Handles, specifically verifying dimensions and material certifications. Technical requirements include the use of CMM, calipers, and micrometers calibrated to national standards, with sampling conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This opportunity is managed by the Department of Defense under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must adhere to the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves providing technical testing and certification for prime contractors on DLA supply contracts. The scope of work focuses on conducting structural integrity and ballistic impact tests for NSN 1680-01-161-1182, utilizing high-speed imaging tools and ballistic ranges as mandated by the Specification Control Drawing. The selected provider must hold military-equivalent or ISO/IEC 17025 laboratory accreditation to ensure compliance with quality standards. A comprehensive FAT Report is required as the final deliverable, which must be submitted within 120 days after receipt of order. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Critical Application Component CertificationThe Critical Application Component Certification subcontract involves providing independent testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The primary scope of work focuses on verifying the structural integrity of Boeing part number 60-3087-2 through dimensional inspection using CMM and Non-Destructive Testing. Performance of these services will take place at Tinker AFB. To qualify, the contractor must maintain NADCAP accreditation and adhere to ISO 9001:2015 and SAE AS9003 standards. Required deliverables include comprehensive inspection reports, quality test data, and a Certification of Conformance. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

Aerospace Component Testing and CertificationThis subcontract for Aerospace Component Testing and Certification supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform Production Lot Testing and quality validation for prime contractors, ensuring items are verified against the Technical Data Package. Testing must be conducted via random sample selection in accordance with MIL-STD-1916 or ASQ H1331 standards. To be eligible, contractors must hold CMMC Level 2 and JCP Certifications. Required deliverables include material and process certifications, DD Form 1222, and PLT reports following DI-NDTI-80809B guidelines. The performance of this contract is centered in zip code 32212-0103, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Pharmaceutical Compliance and Quality AuditorThis subcontract for NHS England Project Revive seeks a Pharmaceutical Compliance and Quality Auditor to perform critical quality audits and compliance checks for prime contractors. The role involves conducting batch testing, auditing supplier manufacturing sites, and verifying certificates of analysis to ensure all operations meet MHRA standards. The successful provider must utilize laboratory testing equipment and adhere to Quality Management Systems such as ISO 9001, and the personnel performing the work must hold a valid pharmacist licensure. Key deliverables for this engagement include the production of quality assurance reports, compliance certifications, and detailed audit logs. Interested parties must respond by November 30, 2026, in accordance with the solicitation posted on November 3, 2026. The contract falls under NAICS code 541380 and is managed directly by NHS England.

POSTED

about 7 hours ago

DEADLINE

Environmental Water Analysis Laboratory ServicesThis subcontract opportunity is for Environmental Water Analysis Laboratory Services supporting prime contractors on USACE St. Paul District projects. The selected provider will be responsible for performing Standard Testing and Organic Suite Testing on residential and permanent well samples in strict accordance with project specifications. To qualify, the laboratory must maintain accreditation under the Minnesota Environmental Laboratory Accreditation Program and is required to provide analytical reports and Electronic Data Deliverables as specified in the contract guidelines. This is a total Small Business Set Aside under NAICS code 541380, managed by the Department of Defense for the W07V Endist St Paul agency. Interested parties must submit their responses by November 18, 2026. The performance of these services will be centered in the 55945 zip code area.

W07V Endist St Paul

POSTED

about 7 hours ago

DEADLINE

Optical Testing and Factory Acceptance Testing (FAT)This small business set-aside subcontract for DLA Land Warren involves providing independent verification and validation of optical units for prime contractors. The scope of work focuses on conducting Factory Acceptance Testing on sample units, performing Scratch and Dig inspections in accordance with MIL-PRF-13830B, and utilizing specialized optical inspection tools to verify alignment and clarity. The selected contractor is responsible for delivering comprehensive FAT Test Reports and official inspection certifications for each lot. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense, with a response deadline set for December 3, 2026.

DLA Land Warren

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of ASTM-A216 Grade WCB Casting/ForgingsThis subcontract with the Department of the Navy's Navsup Weapon Systems Support Mech involves the supply of certified ASTM-A216 grade WCB material for prime contractors. The scope of work requires the sourcing of raw materials or rough castings for eight Critical Safety Item valve bodies, with performance taking place in Mechanicsburg, Pennsylvania. A primary requirement of the contract is the provision of full material traceability and mandatory mill test reports that adhere to Special Emphasis material Level I standards. Interested parties must respond by December 3, 2026, for this procurement categorized under NAICS code 331511.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Manufacture of Feed Water Relief Valves (NSN 4820-01-139-2713)This subcontract involves the manufacture of eight high-pressure feed water relief valves for the Department of the Navy under the Navsup Weapon Systems Support Mech agency. The project requires the fabrication of valves using ASTM-A216 grade WCB material, strictly adhering to Anderson Greenwood drawing 20325 and CD Sheet 16109. All units must undergo precision machining, polishing, cleaning, and assembly in accordance with TDP Version No. 011. To ensure quality and compliance, the contractor must maintain an ISO-9001 quality system and hold a Level I Special Emphasis certification. The work is to be performed in Mechanicsburg, Pennsylvania, with a response deadline set for December 3, 2026.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Marking ServicesThis SBA set-aside subcontract, issued by the Department of the Navy's Navsup Weapon Systems Support Mech, requires specialized packaging and marking services for prime contractors working on US Navy repair projects. The scope of work involves packaging repair parts according to MIL-PRF-23199 and marking containers in compliance with MIL-STD-129. The selected provider must utilize MIL-SPEC crates, cushioning, and moisture barriers, while ensuring all Depot Level Repairable labels are correctly applied to shipping containers. The performance of these services will take place in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of December 3, 2026. This opportunity falls under NAICS code 488510 and focuses on delivering fully prepared shipping containers that are ready for immediate delivery.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Butterfly Valve Replacement Parts SupplyThis subcontract opportunity, titled Butterfly Valve Replacement Parts Supply, is issued by the Department of the Navy via Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing or sourcing internal components, seals, and modified parts for prime contractors involved in US Navy valve repair projects. All deliverables, which may include individual components or sub-assemblies, must strictly adhere to TDP Version 001 specifications and naval material standards, with a mandatory requirement for Item Unique Identification reporting. The project is categorized under NAICS code 332911 and is designated as an SBA set-aside. Performance will take place in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of December 3, 2026.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Butterfly Valve Teardown and RepairThis subcontract, issued by the Department of the Navy via Navsup Weapon Systems Support Mech, involves the teardown, evaluation, repair, and modification of butterfly valves (NIIN 016063465) for prime contractors on US Navy projects. The scope of work requires the execution of detailed assembly evaluations and repairs strictly adhering to Technical Data Package Version 001. To ensure operational integrity and seal verification, the contractor must utilize precision machining, valve grinding equipment, and specialized testing rigs. The project is categorized under NAICS code 332911 and is designated as an SBA set-aside. Performance of the contract will take place in Mechanicsburg, Pennsylvania. Interested parties must respond by the deadline of December 3, 2026, to provide certified repaired valves that meet all specified naval requirements.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Flexible Shaft CouplingsThis subcontract involves the manufacture and supply of precision flexible shaft couplings for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The contractor is responsible for producing couplings that adhere strictly to NSN 3010-01-541-0913 specifications, with a specific emphasis on meeting mercury exclusion requirements. All deliverables must be packaged according to MIL-STD-2073 and clearly labeled as ASTERN COUPLING before being delivered to designated Navy destinations. The opportunity is categorized under NAICS code 333249 and is designated as an SBA set-aside. Performance for this contract is centered in Mechanicsburg, Pennsylvania. Interested parties should note the response deadline of December 3, 2026, for this Department of the Navy requirement.

Other Industrial Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Mercury-Free Electrical Component SupplyThis subcontract for the Department of the Navy, specifically Navsup Weapon Systems Support Mech, involves the supply of raw materials, wires, and connectors for prime contractors. All provided components must strictly adhere to NAVSEA drawing 6557906 specifications and be certified mercury-free to eliminate risks of corrosion and toxicity within submarine and surface ship environments. The contractor is required to maintain ISO 9001 certification and provide material certifications of conformance for all delivered shielding materials, wires, and connectors. Performance for this contract is centered in Mechanicsburg, Pennsylvania, with a response deadline set for December 3, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Weapon Control Cable Wiring Harness FabricationThis subcontract involves the fabrication of a single Weapon Control Cable wiring harness for the Department of the Navy under the Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing the harness according to NAVSEA drawing 6557906 and cage 53711, while executing non-destructive First Article Tests in compliance with NAVSEA Drawings 6557906 and 6557920. Additionally, all marking must adhere to MIL-STD-129 and MIL-STD-2073-1 standards. To be eligible, the provider must hold PRO-20 certification, ISO 9001 certification, and 53711 Naval Engineering Approval. The project is categorized under NAICS code 335929, with the place of performance located in Mechanicsburg. The response deadline for this requirement is December 3, 2026.

Other Communication and Energy Wire Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Supply of Magnetic Contactors (NSN 6110-01-443-2468)This subcontract involves the supply of three magnetic contactors for prime contractors supporting Navsup Weapon Systems Support Mech projects. The selected provider is responsible for manufacturing or sourcing hardware in strict accordance with NSN 6110-01-443-2468, IRPOD, and MIL-T-31000 technical data packages. All materials must adhere to Buy American requirements to ensure domestic compliance. The scope of work includes performing packaging according to MIL-STD-2073 and providing necessary Certificates of Compliance per DI-MISC-81356. The final delivery consists of the three magnetic contactors along with all required technical documentation. Performance for this Department of the Navy contract will take place in Mechanicsburg, Pennsylvania.

Relay and Industrial Control Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Nonmetallic Hose Supplier (NSN 4720-01-437-1073)This subcontract opportunity with the Department of the Navy's Navsup Weapon Systems Support Mech involves the supply of nonmetallic hoses manufactured to NSN 4720-01-437-1073 specifications. The contractor must ensure that all materials are mercury-free and that packaging adheres to MIL-STD-2073 and MIL-H-24135 standards using QPL-approved barrier materials. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 331221. Key compliance and documentation requirements include adherence to NIST SP 800-171 standards. Deliverables must be accompanied by Certificates of Compliance and cure date certificates. This is an SBA set-aside opportunity with a response deadline of December 3, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Military Grade Packaging and Marking ServicesThis subcontract for Military Grade Packaging and Marking Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of the Navy. The scope of work involves providing specialized packaging, marking, and palletization services performed in Mechanicsburg, Pennsylvania. All deliverables must be prepared for FOB Destination shipment, ensuring components are fully ready for transport. Technical requirements mandate strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 P for marking, which includes the application of DLR labels for Navy Afloat units. The contractor is required to utilize military-grade materials, including MIL-SPEC anti-static bags, moisture barriers, and crates. The response deadline for this opportunity is January 4, 2027.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Electronic Component Repair and Modification ServicesThis subcontract for Electronic Component Repair and Modification Services supports the Department of the Navy via Navsup Weapon Systems Support Mech. The scope of work involves the teardown, evaluation, repair, and modification of electronic components, specifically NIIN 015991244, for prime contractors. All activities must be performed according to OEM specifications and technical orders, with a strict requirement for ANSI/ESD S20.20 controlled environments and the use of mercury-free components. The contractor is responsible for marking all components in accordance with MIL-STD-130 M to ensure they meet operational requirements upon delivery. Performance of these services will take place in Mechanicsburg, Pennsylvania. The solicitation was posted on November 3, 2026, with a response deadline of January 4, 2027, under NAICS code 811219.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS