This Government Contract opportunity from Department Of Veterans Affairs was posted on May 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Preventative Maintenance Services for Fume Hoods & Safety Cabinets

Closed

Federal

Submission Closed05/26/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811411

New

Federal

Marine Diesel Engine Rear Main Seal RepairThis contract involves troubleshooting and repairing rear main seal leaks on both marine diesel engines of the 49406 BUSL vessel. The scope of work includes the removal of reduction gears during the vessel haul-out to facilitate the repair. The contract is designated as a subcontract and is set aside partially for small businesses under the FAR 19.5 regulations. The work is to be performed in Boston, with the Department of Homeland Security managing the procurement through its SFLC Procurement Branch 3. The solicitation was posted on June 16, 2026, with a response deadline of June 25, 2026, at 1:00 PM. The NAICS code for this contract is 811411, which corresponds to automotive repair and maintenance activities, reflecting the technical nature of engine repair. The contract focuses on addressing critical maintenance needs to ensure the operational readiness and reliability of the vessel’s marine diesel engines.

Sflc Procurement Branch 3(00040)

POSTED

DEADLINE

Fuel Tank Preventive Maintenance ServicesThe contract titled "Fuel Tank Preventive Maintenance Services" involves routine servicing that includes cleaning, calibration, leak detection, and system diagnostics for fuel storage tanks. This subcontract is issued by the California Department of Transportation and focuses on ensuring the proper functioning and safety of fuel storage systems through preventive maintenance measures. The service is to be performed in Orange, California, emphasizing localized support for the agency's fuel infrastructure. Key dates include the posting of the contract on June 15, 2026, with a response deadline by June 30, 2026. The contract falls under the NAICS code 811411, which pertains to automotive repair and maintenance services. While no specific set-aside type or organization details are provided, the contract aims to support the California Department of Transportation in maintaining compliance and operational efficiency of their fuel storage tanks through scheduled maintenance activities.

California Department of Transportation

POSTED

DEADLINE

Harbor and Barrier Boat Preventative Maintenance (PMS) ServicesThis contract involves providing scheduled preventative maintenance services for Yamaha F-250 outboard engines and original equipment manufacturer (OEM) systems in accordance with Navy Preventative Maintenance System (PMS) requirements. The maintenance includes service intervals at 100 and 500 hours to ensure optimal operational readiness and longevity of Harbor and Barrier boats. The work will be performed in San Diego, with a focus on maintaining critical Navy watercraft assets. The contract is a subcontract opportunity set aside specifically for Service-Disabled Veteran-Owned Small Businesses (SDVOSBC), reflecting the Department of the Navy's commitment to supporting veteran entrepreneurs. The solicitation was posted on June 15, 2026, with responses due by June 18, 2026. It falls under NAICS code 811411, which pertains to automotive mechanical and electrical repair and maintenance services, and is managed under the Department of Defense.

Department Of The Navy

POSTED

DEADLINE

Control Cab Window Glass Repair ServicesThis contract involves providing onsite repair services for damaged or deteriorated window glass units in FAA air traffic control tower cabs. The scope includes assessment, stabilization, and restoration of the glass units while ensuring they maintain their optical clarity and structural integrity. The work is crucial for the safety and operational effectiveness of air traffic control tower environments. Issued by the Department of Transportation under the regional acquisitions office 697DCK, this subcontract opportunity falls under NAICS code 811411, which pertains to automotive glass replacement shops. The contract was posted on June 15, 2026, with a response deadline of July 15, 2026, at 4:00 PM. While specific location details and points of contact are not provided, the contract focuses on maintenance support critical to FAA infrastructure, emphasizing precision and reliability in repair services.

697DCK Regional Acquisitions Svcs

POSTED

DEADLINE

Item Unique Identification (UID) Marking and Data SubmissionThe contract requires the application of MIL-STD-130 compliant Unique Identification (UID) markings, such as Data Matrix codes, on items valued over $5,000. Contractors must also submit detailed item data to the Wide Area Workflow (WAWF) system or an equivalent Department of Defense registry, ensuring traceability and proper asset management. The contract is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, targeting businesses classified under NAICS code 811411, which pertains to automotive repair and maintenance services. Issued by the Department of Defense’s NUWC Division Newport, the solicitation was posted on June 15, 2026, with a response deadline of June 26, 2026. While specific location details for the place of performance and office address are not provided, interested parties can access additional information through the provided online workspace link. This contract emphasizes compliance with federal standards for item marking and data submission, aligning with DoD requirements to maintain accountability and support logistical operations.

Nuwc Division Newport

POSTED

3 days ago

DEADLINE

in 9 days

AI Contract Overview

This contract involves providing semiannual preventative maintenance services for fume hoods and safety cabinets, which includes inspection, cleaning, lubrication, tightening of components, and necessary repairs in accordance with original equipment manufacturer (OEM) guidelines. The service is aimed at ensuring the optimal operation and safety of these critical laboratory and facility safety devices. The contract is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSBC) under NAICS code 811411. It is managed by the Department of Veterans Affairs, specifically the 262-NETWORK Contract Office 22 (36C262). The performance location for the work is Long Beach, California, with a response deadline of May 26, 2026. This opportunity supports ongoing maintenance needs to uphold safety standards within the agency’s facilities.

General Info

Semiannual fume hood maintenance contract for SDVOSBC at Long Beach VA, deadline May 26, 2026.

Agency

Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

NAICS

811411 - Home and Garden Equipment Repair and Maintenance View NAICS

Place of Performance

Long Beach, CA, 90822, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 1

subcontract

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

Office AddressN/A

ContactsNo contact information available

Full Description

Perform semiannual preventative maintenance on fume hoods and safety cabinets including inspection, cleaning, lubrication, component tightening, and repairs per OEM guidelines.