Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Project Management for Medical Equipment Deployment

Active

Federal

Response Deadline08/10/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires end-to-end project management for the delivery, installation, and commissioning of medical equipment at a VA facility in Tucson, Arizona, with strict compliance to a 60-day delivery timeline. The contractor must coordinate directly with VA staff throughout all phases to ensure seamless integration of equipment into operational environments, maintaining alignment with institutional protocols and standards. All activities must be executed with precision to meet deadlines and uphold quality expectations for clinical deployment. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), classified under NAICS code 541330 for scientific and technical consulting services. The opportunity was posted on August 6, 2026, with proposals due by August 10, 2026, and is managed by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. Performance is localized to the specified Tucson address, with no alternative locations permitted. The contracting office has not designated a point of contact publicly, and all inquiries must follow official SAM.gov submission protocols.

General Info

SDVOSB subcontract for medical equipment delivery, installation, and commissioning at Tucson VA, 60-day deadline, NAICS 541330.

Agency

Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Tucson, AZ, 85723-0002

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

End-to-end project oversight for equipment delivery, installation, and commissioning, ensuring coordination with VA staff and 60-day delivery compliance.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other certified firms. The project requires a range of professional services including engineering, environmental analysis, surveying, geotechnical work, permitting, public outreach, and utility location, with relevant NAICS codes covering architectural and engineering services, construction, and related specialized activities. The solicitation places particular emphasis on inclusion of SBA-certified small businesses and DBEs under the Department of Transportation program, encouraging firms with these designations to submit qualifications. Interested parties must submit their qualifications package and request solicitation documents by 5 p.m. PST on August 14, 2026, with responses due no later than September 15, 2026. All inquiries and submissions should be directed to Charlie Brown at charles.brown@ghd.com.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, line-bid items for drilling and abandonment, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design, along with a line-item bid schedule for equipping, testing, and commissioning the new well. The well must comply with AWWA potable water standards, feature a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump systems, and tie into the Corydon Blend station and Malaga blending location, meeting all requirements from the State Water Resources Control Board, Department of Water Resources, and Elsinore Valley Municipal Water District. The consultant will prepare a Preliminary Design Report, review up to 200 submittals, assist with domestic water supply permit amendments, and develop record drawings reflecting field changes while supporting start-up, commissioning, and operator training. Proposals must demonstrate relevant qualifications and experience with utilities or government agencies, a clear understanding of the project scope, a feasible schedule with risk mitigation strategies, innovative yet practical solutions, cost transparency, and overall proposal quality. The award will be based on demonstrated competence and professional qualifications, not lowest cost. Submission requires strict adherence to formatting guidelines including a cover letter, detailed staff resumes, representative project lists, three professional references, district contract history, and a fully itemized cost proposal broken down by task. Required certifications and documentation include American Iron and Steel Compliance, Lobbying Certification, Debarment and Suspension Certification, System for Award Management information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, and Public Works Contractor Registration—all submitted via Attachment “2.” Additionally, the contractor must comply with Build America Buy America requirements, including domestic-content certifications and waiver memoranda for non-compliant materials, and adhere to federal mandates on telecommunications restrictions, anti-trafficking, environmental recovered materials, civil rights compliance, and sanctions against Iran and Russia. The proposal submission deadline is September 1, 2026, via the PlanetBids portal, with questions due by August 2

Ardurra Group, Inc.

POSTED

about 12 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, California. The scope of work encompasses full-service engineering support from initial design through construction phase, ensuring technical accuracy, regulatory compliance, and efficient project delivery. The solicitation is open to qualified firms with experience in water system engineering and is specifically set aside for Disadvantaged Business Enterprises under Department of Transportation guidelines, reflecting a commitment to inclusive contracting. The project is identified under bid/contract number C2305 and falls under NAICS code 541330 for architectural and engineering services. The solicitation was posted on August 7, 2026, with a response deadline of September 1, 2026, and is being administered by AKM Consulting Engineers, which serves as both the contracting agency and point of contact. Primary communications regarding the solicitation should be directed to Katie Neubauer via phone or email provided. Although specific address details for the office or performance location are not listed, the project’s physical performance is confirmed to be in Riverside County, California. Interested parties are encouraged to review the full solicitation details through the official SBA opportunity portal to ensure alignment with all submission requirements and eligibility criteria for DBE participation.

AKM Consulting Engineers

POSTED

about 12 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves designing a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well on Elsinore Valley Municipal Water District property, with full engineering and construction support services required throughout both design and implementation phases. The scope encompasses hydrogeological evaluation, aquifer analysis, well design adhering to AWWA standards and matching the existing casing depth with a 24-inch stainless steel Ful-Flo louvered screen, civil and structural site design including grading, drainage, and utility coordination, mechanical and electrical engineering for well equipping, instrumentation and SCADA systems, geotechnical and soil testing, water quality sampling, environmental permitting with SWRCB and NPDES compliance, borehole geophysical logging, and comprehensive construction management with full-time on-site oversight during drilling and equipping. The project is divided into two phases: Phase 1 focuses on technical specifications, site design, bidding support, and construction management for drilling and abandonment, while Phase 2 covers detailed architectural, mechanical, structural, and electrical designs for facility equipping, testing, and commissioning, supported by engineering services during construction. Compliance with the Build America, Buy America Act and 2 CFR Part 184 is mandatory, requiring documented sourcing of domestic iron, steel, and manufactured products, along with certification of non-collusion and adherence to federal procurement rules. The consultant must submit a cost proposal with hourly rates broken down by task, capped at a not-to-exceed amount of $1,000,000, partially funded by a $400,000 BOR Grant, with the remainder covered by non-federal sources. The solicitation requires proposers to demonstrate relevant experience in municipal groundwater projects, provide detailed resumes of proposed key personnel including licensed California professionals, and confirm current certifications including DBE, MBE, WOSB, or small business status, as the set-aside prioritizes small, disadvantaged, and minority-owned businesses. Subcontractors must also meet these certifications and be disclosed in the proposal. Required documentation includes a Conflict of Interest Disclaimer, American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM registration, Public Works Contractor Registration, Executive Order N-6-22 Certification confirming no ties to sanctioned Russian entities, and a California Air Resources Board Certificate of Reported Compliance. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and must include a cover letter, three references, insurance

GEI Consultants, Inc.

POSTED

about 12 hours ago

DEADLINE

Engineering Services – Emergency Generator Installation for Municipal Wells (3 Sites)

Solicitation # 26-31

Murray City is seeking qualified engineering firms to provide professional services for the design, bidding, and construction support of emergency backup power systems at three municipal culinary water wells. The project, funded partly by a federal EPA Community Grant, must comply with all applicable requirements under 2 CFR Part 200 (Uniform Guidance) and has a budget of $120,000 for engineering services. The selection process involves a two-phase evaluation: Phase I includes independent scoring of Statements of Qualifications by the Selection Committee, followed by a discussion to identify the top three firms. Phase II consists of interviews with those shortlisted firms, after which scores from both phases are combined to determine the final ranking. If fewer than three qualified firms submit responses, the City will follow its code and federal regulations to determine the next steps. Submissions are due by September 7, 2026, and inquiries should be directed to Amandah Maudsley at amaudsley@murray.utah.gov. The project is located in Murray, Utah.

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Forestry and Parks - Request for Proposal - ENGINEERING, DESIGN AND CONSTRUCTION ADMINISTRATION CONSULTANT SERVICES at Moose Mountain Parking Upgrades at Kananaskis Public Land Use Zone

Solicitation # AB-2026-05557

The Consultant will be responsible for reviewing and validating the Integrated Development Plan for parking area upgrades at three locations within the Kananaskis Public Land Use Zone — the Base of Moose Mountain Road, the 2 Kilometer Parking Area, and the Top of Moose Mountain Road — with total new disturbances of approximately 0.429 hectares across the sites. This includes conducting field validation of proposed improvements, refining designs based on ground conditions, constructability, environmental constraints, regulatory compliance, traffic flow, parking functionality, and operational needs, all while adhering to approved disturbance limits unless additional approval is obtained from Alberta Forestry and Parks. The Consultant must apply proven non-urban park design practices throughout all project phases, from assessment and conceptual design through detailed design, regulatory approvals, tender documentation, construction administration, and final project close-out. The work requires full engineering and design services to deliver safe, efficient, and environmentally responsible parking infrastructure upgrades, including improved traffic circulation, vehicle movement, and site access. The project must be initiated within five business days after contract execution and completed by February 28, 2028, with all design, approvals, and construction oversight delivered on schedule. The locations are precisely defined by geographic coordinates, and the Consultant must work closely with the Province to ensure alignment with all regulatory, environmental, and operational expectations. The project is managed by Alberta Forestry and Parks, with Monica Purewal serving as the primary point of contact, and the solicitation number AB-2026-05557 governs all aspects of engagement.

Forestry and Parks

POSTED

about 18 hours ago

DEADLINE

Design Phase – Bus Wash RehabilitationThe contract seeks the development of comprehensive design documentation for bus wash and steam-cleaning systems as part of a rehabilitation effort, requiring detailed concept designs, construction drawings, and technical specifications to support full implementation. The work is classified under NAICS code 541330, indicating engineering services, and is structured as a subcontract under the Georgia Transportation Efficiency Authority, with responses due by September 24, 2026. The project emphasizes precision in system design to ensure operational efficiency, durability, and compliance with facility requirements for bus maintenance infrastructure. All deliverables must align with industry standards and be tailored for use within Georgia’s transportation maintenance facilities, though specific performance locations and contact details are not provided. The solicitation was posted on August 6, 2026, and interested parties must submit proposals through the designated state portal by the deadline.

Georgia Transportation Efficiency Authority

POSTED

about 19 hours ago

DEADLINE

in about 2 months

26-0088-2 Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction

Solicitation # PE-77548-NONST-2027-000000401

Chatham County is soliciting proposals from qualified consulting firms to provide professional engineering services for pavement and drainage improvements along Wahlstrom Road and Forbes Road, aiming to resolve existing drainage issues and enhance the structural integrity of the roadway. The project requires a comprehensive evaluation of the current pavement conditions and the development of targeted recommendations for resurfacing and structural upgrades capable of supporting the high volume of heavy truck traffic alongside regular passenger vehicles. The selected firm must assess existing infrastructure, identify deficiencies, and propose durable solutions that extend the service life of the roads while improving overall performance and safety. The solicitation, titled Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction with number PE-77548-NONST-2027-000000401, was posted on August 6, 2026, with a response deadline of September 8, 2026. The work is to be performed within Chatham County, Georgia, and the procurement is conducted under the state’s SLED agency framework. Interested firms should submit their proposals by the stated deadline, with all inquiries directed to Sabrina Tippett at stippet@chathamcounty.org. The opportunity is open to qualified vendors with demonstrated expertise in roadway design, pavement analysis, and drainage system engineering.

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Engineering and Regulatory ComplianceThe contract entails the preparation of PE-stamped engineering drawings and the full spectrum of permitting and regulatory compliance activities required for projects in Maui County, adhering strictly to the Uniform Development Code, NFPA standards, API specifications, and all applicable local ordinances. This subcontract requires expert knowledge of regional regulatory frameworks and the ability to navigate the permitting process efficiently to ensure projects meet all technical, safety, and legal requirements. The work must be executed by qualified professionals capable of producing stamped documentation that satisfies both state and county authorities. All deliverables must be completed by the response deadline of August 27, 2026, and the contract is classified under NAICS code 541330 for architectural, engineering, and related services. The contracting entity is the County of Maui in Hawaii, with no specific set-aside provisions indicated. Performance of the work is expected to occur within Maui County, and while no point of contact is listed, bidders must submit responses through the official public procurement portal prior to the deadline to be considered.

POSTED

about 20 hours ago

DEADLINE

HVAC System Design and EngineeringThe contract titled HVAC System Design and Engineering solicits comprehensive mechanical and electrical engineering services to support a major HVAC upgrade, including mechanical layout development, precise electrical load calculations, integration of building control systems, and the creation of site-specific engineering plans tailored to the facility’s needs. The scope requires expert-level technical delivery to ensure system efficiency, compatibility, and compliance with operational and safety standards. Work must be performed under a subcontract arrangement with a response deadline of September 11, 2026, and is classified under NAICS code 541330 for architectural and engineering services. The procuring entity is the California Department of Technology, representing the state of California, with no specific location details provided for performance or contact information, signaling that the project may span multiple sites or require offsite planning prior to on-site implementation.

California Department of Technology

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Mechanical Design and Engineering SupportThe contract seeks mechanical design and engineering support for the replacement of HVAC systems, requiring detailed review and coordination of mechanical plans and specifications. The selected contractor will work closely with the design firm Allen & Hoshall to ensure technical accuracy, compliance, and seamless integration of new system components. This subcontract focuses on delivering expert engineering services throughout the design phase to support a large-scale facility upgrade under the oversight of the Mississippi Department of Military. The opportunity is posted under NAICS code 541330 for architectural and engineering services, with a response deadline of September 10, 2026. While the solicitation number and specific location details are not provided, the work is tied to a state military facility in Mississippi. The contract type is classified as a subcontract, indicating it is part of a broader project managed by a prime contractor or agency. There is no set-aside designation specified, and all interested parties should submit proposals by the stated deadline to be considered for participation.

MS DEPT of MILITARY

POSTED

about 22 hours ago

DEADLINE

in about 1 month

SCADA System Design and IntegrationThe contract entails the engineering and integration of a cellular SCADA system for the City of Booneville’s water system, focusing on the design of system architecture, network infrastructure, and interoperability frameworks to ensure seamless communication and operational control across water distribution components. The work requires thorough planning to align cellular communication protocols with existing water infrastructure, enabling real-time monitoring, remote control, and data acquisition without compromising reliability or cybersecurity standards. The solicitation is open as a subcontract under NAICS code 541330, administered by MPTAP through the Mississippi Department of Finance and Administration, with proposals due by September 8, 2026. The project demands technical expertise in industrial automation, wireless network deployment, and utility systems integration, with performance expected to support long-term operational efficiency and regulatory compliance for the city’s water services. While detailed location and point of contact information are unspecified, the scope is clearly defined around enabling a modern, secure, and scalable SCADA solution tailored to Booneville’s unique water system requirements.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

Same awarding agency

Standard Labor Support (General Technical Services)This contract is for the provision of six labor hours of general technical support, which may include troubleshooting, technical assistance, or administrative tasks related to equipment deployment. It is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business set-aside, specifically designated for SDVOSB firms as defined under FAR 19.14, ensuring priority consideration for businesses owned and controlled by service-disabled veterans. The North American Industry Classification System code 541519 applies, indicating the work falls under other computer-related services. The solicitation was posted on August 6, 2026, with responses due by August 10, 2026, at 4:00 p.m. The performance location is in Tucson, Arizona, with a zip code of 85723-0002. The contracting office is the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs, and all work must be performed in alignment with the requirements and limitations outlined for SDVOSB subcontracting opportunities.

Other Computer Related Services

POSTED

DEADLINE

Clinical Configuration and Implementation ServicesThe contract titled Clinical Configuration and Implementation Services is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, with a NAICS code of 541512 for computer systems design and related services. It requires on-site execution of comprehensive monitoring system deployments within a clinical environment, including seamless electronic health record integration, robust network security configurations, and hands-on user training for clinical staff. The work is to be performed at a specified location in Tucson, Arizona, with a zip code of 85723-0002, and must be completed in alignment with the stringent demands of a healthcare setting governed by federal standards. The solicitation was posted on August 6, 2026, with a firm response deadline of August 10, 2026, at 4:00 PM Eastern Time, indicating a highly time-sensitive procurement process. Responsibility for issuing and managing this contract lies with the Department of Veterans Affairs through its 262-NETWORK Contract Office 22. The nature of the engagement emphasizes direct, physical presence at the facility to ensure accurate system calibration, secure data communication protocols, and effective adoption by end users in an environment where system reliability and compliance are non-negotiable. Success in fulfilling this contract demands technical precision, domain-specific healthcare experience, and a proven capacity to operate under the constraints of a federally regulated clinical infrastructure.

Computer Systems Design Services

POSTED

DEADLINE

Supply of Carestation 650 Anesthesia Delivery SystemsThe contract involves the supply of two Philips Carestation 650 anesthesia delivery systems, each equipped with dual FMX-4 integration and compatible side modules, ensuring full compliance with required clinical and technical specifications. These systems are critical for advanced anesthetic administration and must meet rigorous standards for safety, performance, and interoperability within a healthcare environment. The solicitation is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, specifically designated to support businesses owned by service-disabled veterans, as defined under FAR 19.14. The North American Industry Classification System code 339112 identifies the procurement as related to surgical and medical instrument manufacturing. Performance of the contract is required to be fulfilled at the location in Tucson, Arizona, with a ZIP code of 85723-0002. The opportunity was posted on August 6, 2026, with a firm response deadline of August 10, 2026, at 4:00 PM, and the contracting office is the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Supply of IntelliVue FMX-4 Fetal/Neonatal Monitoring SystemsThe contract involves the delivery of four Philips IntelliVue FMX-4 fetal and neonatal monitoring systems designed to meet clinical standards for maternal and newborn care, with full compliance with electronic health record systems and integration into the Philips ecosystem to ensure seamless data flow and interoperability. The equipment must support continuous monitoring capabilities for both fetal and neonatal patients, adhering to all technical and regulatory specifications required for deployment in healthcare environments. This is a subcontract classified as a Service-Disabled Veteran-Owned Small Business set-aside under FAR 19.14, specifically targeting SDVOSB firms to promote veteran-owned business participation in federal contracting. The NAICS code 339112 confirms the industrial classification as Medical Equipment and Supplies Manufacturing. The solicitation was posted on August 6, 2026, with a response deadline of August 10, 2026, and the place of performance is specified as Tucson, Arizona, with a ZIP code of 85723-0002. The contracting authority is the Department of Veterans Affairs through the 262-NETWORK Contract Office 22 (36C262), indicating the systems will be deployed within VA healthcare facilities. The requirement emphasizes vendor capability to deliver fully configured, tested, and compliant systems ready for clinical use, with integration support to ensure compatibility with existing hospital infrastructure and data protocols. No point of contact details are provided in the public data, but the opportunity is accessible via the SAM.gov portal for eligible bidders.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Supply of IntelliVue Patient Monitor MX750 UnitsThe contract involves the procurement and delivery of two Philips IntelliVue MX750 patient monitors equipped with an 18-inch display, full EHR integration, and end-to-end encryption to ensure secure data transmission. These units are designated for deployment at a facility in Tucson with a ZIP code of 85723-0002, and the delivery must comply with all technical specifications outlined in the solicitation. The procurement is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, as defined by FAR 19.14, and falls under NAICS code 339112 for medical equipment manufacturing. The contract was posted on August 6, 2026, with a response deadline of August 10, 2026, at 4:00 PM, and is managed by the 262-NETWORK Contract Office 22 within the Department of Veterans Affairs.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Medical Device Packaging and Domestic ShippingThe contract requires the provision of compliant, carrier-acceptable packaging and coordination of domestic shipping for medical devices to ensure safe and timely delivery. All packaging must meet regulatory and transportation standards to safeguard the integrity of sensitive medical equipment during transit, with full accountability for adherence to industry and federal guidelines. The work is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under FAR 19.14, indicating that only qualified SDVOSB entities are eligible to respond, and the North American Industry Classification System code 484220 confirms the focus on specialized freight transportation services. The opportunity is issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22, with performance taking place in Long Beach, CA 90822. The solicitation was posted on August 6, 2026, and responses are due by 11:00 PM Eastern Time on August 7, 2026. This is a subcontracting opportunity, meant to support larger procurement efforts, and the successful vendor will be responsible for seamless logistical coordination, compliance documentation, and reliable delivery of medical devices within the specified timeframe and location.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 7 hours

Supply of Zoll SurePower II Smart BatteriesThe contract involves the supply of three new Zoll Six Hour Rechargeable SurePower II Smart Batteries, or equivalent models, designed for use with Zoll X Series medical devices. These batteries are critical for ensuring continuous operation of life-sustaining equipment in emergency and clinical settings, requiring high reliability and smart charging capabilities. The solicitation is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, ensuring priority consideration for businesses owned and controlled by service-disabled veterans, in accordance with FAR 19.14. The North American Industry Classification System code 335912 identifies the industry as Battery and Power Device Manufacturing, aligning the procurement with specialized manufacturing capabilities. The opportunity was posted on August 6, 2026, with a response deadline of August 7, 2026, indicating a narrow window for submissions and suggesting an urgent need for the batteries. The place of performance is designated as Long Beach, California, with a zip code of 90822, specifying where the delivered products must be shipped and potentially installed or integrated. The contract is managed by the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs, reflecting the federal government’s commitment to equipping VA healthcare facilities with reliable medical technology. The set-aside designation underscores a broader federal initiative to support veteran-owned small businesses while maintaining stringent procurement standards for mission-critical medical components.

Primary Battery Manufacturing

POSTED

DEADLINE

in about 7 hours

Supply of Zoll X Series Monitor/Defibrillator UnitsThe contract seeks the supply of three new Zoll X Series Monitor/Defibrillators equipped with an Expansion Pack that includes SpO2, pacing, NIBP, IBP/Temp, and EtCO2 capabilities, or equivalent compliant devices meeting the same functional standards. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, ensuring eligibility and preference for businesses owned and controlled by service-disabled veterans, as defined by FAR 19.14. The North American Industry Classification System code is 339112, indicating the focus on medical equipment and supplies manufacturing. The solicitation was posted on August 6, 2026, with a response deadline of August 7, 2026, allowing very limited time for proposals. The place of performance is designated as Long Beach, California, with a zip code of 90822, and the contracting office is managed by the Department of Veterans Affairs under the 262-NETWORK Contract Office 22 (36C262). All responses must fully comply with technical specifications and qualify under the SDVOSB criteria to be considered.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

in about 7 hours

Domestic Packaging and Shipping ServicesThe contract involves the domestic packaging and shipping of 30 exam tables in full compliance with the Department of Veterans Affairs regulation VAAR 852.247-73 packing standards and all applicable carrier requirements. The work must be executed to ensure safe, secure, and regulatory-compliant handling throughout the transportation process, with emphasis on proper materials, labeling, and documentation. This is a subcontract opportunity under a Small Business Set Aside, exclusively available to small businesses, classified under NAICS code 484220 for specialized freight trucking. The opportunity was posted on August 6, 2026, with responses due by August 10, 2026, and is managed by the 262-NETWORK Contract Office 22 within the Department of Veterans Affairs, requiring strict adherence to federal shipping protocols and timelines.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Upholstery and Seamless Covering SupplyThe contract seeks the supply of seamless, durable, and antimicrobial upholstery material specifically designed for medical-use environments, with a required width of 28 inches to meet stringent performance and hygiene standards. The material must support heavy daily use in healthcare settings, ensuring long-term resilience, easy cleaning, and resistance to microbial growth without compromising comfort or structural integrity. All submissions must comply with technical specifications aligned to medical-grade durability requirements, and the product must be suitable for integration into furniture and fixtures used in veteran healthcare facilities. This is a Small Business Set Aside contract under the NAICS code 314999, reserved exclusively for small businesses, and is categorized as a subcontract opportunity issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The solicitation was posted on August 6, 2026, with responses due by August 10, 2026, at 11:00 PM. The place of performance and exact delivery location are not specified, but the material will service VA healthcare infrastructure nationwide. Interested vendors must submit proposals through the designated SAM.gov portal before the deadline to be considered for award.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

Supply of Factory-Installed Safety Grab Bars for Medical TablesThe contract requires the manufacture and integration of safety grab bars as a factory-installed component of medical exam tables, with strict adherence to medical-grade metal fabrication standards and precision fitting protocols to ensure patient safety and regulatory compliance. All components must be designed and assembled to meet the functional and durability requirements of healthcare environments, with a focus on seamless integration into the table structure without compromising ergonomic or hygiene standards. This is a Small Business Set Aside under the SBA program, specifically designated for total set-aside, meaning only qualified small businesses may submit proposals. The NAICS code 332999 identifies it as a miscellaneous manufacturing activity, and the opportunity is managed by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. Proposals must be submitted by the deadline of August 10, 2026, with no solicitation number provided, and the place of performance and point of contact details are unspecified, indicating potential flexibility in location or further details to be provided upon award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Flex Access Exam Tables (Powered, ADA-Compliant)The contract calls for the procurement and delivery of 30 powered medical exam tables designed to meet ADA compliance standards, featuring automatic height adjustment, a minimum 700-pound weight capacity, seamless upholstery for easy sanitation, and factory-installed safety grab bars to enhance patient stability and caregiver support. All units must be fully functional upon delivery and adhere to strict quality and safety specifications to ensure durability and reliability in clinical environments. The solicitation is designated as a Small Business Set Aside under the SBA program, specifically targeting small businesses to encourage participation and promote economic opportunity in federal supply chains. This is a subcontract under the Department of Veterans Affairs, managed by the 262-NETWORK Contract Office 22, with the NAICS code 339112 indicating medical equipment manufacturing. The opportunity was posted on August 6, 2026, with responses due by August 10, 2026, giving interested vendors a limited window to submit proposals. Performance location details are not specified, but delivered units are intended for use within VA healthcare facilities. The contract emphasizes compliance, functionality, and accessibility, aligning with VA standards for patient-centered care and inclusive design in medical equipment.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE