Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Purchase and Delivery of Intelligent Auto-Flusher

Open
RFB 27-023State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Clermont is soliciting bids under RFB 27-023 for the purchase and delivery of one new Intelligent Auto-Flusher for its Public Services Department. The required equipment is a Kupferle Eclipse 9700i-Solar Intelligent Automatic Flushing Station or an approved equivalent, designed to maintain free chlorine residual levels. Key technical specifications include a free chlorine sensor with a measurement range of 0.00 to 5.00 ppm or greater and a standard 2.5-inch National Standard Thread fire hydrant outlet. The unit must be new, fully assembled, and delivered F.O.B. Destination within 30 consecutive calendar days of the purchase order issuance. The contract will be awarded to the lowest responsive and responsible bidder who meets all technical requirements. Bids must be submitted electronically via the City's OpenGov Portal by December 10, 2026, and must remain valid for 90 days. The agreement includes several compliance mandates, including adherence to the Davis-Bacon and Copeland Acts, Florida drug-free workplace and E-Verify statutes, and Florida Executive Order 22-216 regarding cybersecurity. Additionally, the contractor is required to provide performance and labor and material payment bonds. The City reserves the right to inspect equipment upon delivery, with a requirement that any deficiencies be corrected within 10 business days at no additional cost.

General Info

City of Clermont seeks bids for one new Intelligent Auto-Flusher delivery.

Documents

7
PDF, High priority: read this first21 pages · supplemental-conditions
High
PDF, High priority: read this firstrfb
High
PDF, High priority: read this first7 pages · wage-determination
High
PDF, High priority: read this first6 pages · performance-bond
High
DOCX, High priority: read this first15 pages · contract-document
High
PDF, Low priority2 pages · bid-bond
Low
PDF, Low priority1 page · special-notice
Low

Read all 7 documents

Due in 22 days

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 22 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 7 solicitation documentsRead every page
  • AI contract breakdown12 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyFlorida → Public Services - Environmental Svcs.
Contacts2 people available
OfficeClermont, FL, 34711, USA

Interested Companies (2)

All For FamilyPembroke Pines, FL

Full Description

Show more
The City of Clermont is accepting bids from qualified bidders for the purchase and delivery of one (1) new Intelligent Auto-Flusher for the Public Services Department, consisting of one (1) Kupferle Eclipse 9700i-Solar Intelligent Automatic Flushing Station that maintains free chlorine residual levels or an approved equivalent. All equipment shall be furnished and delivered in accordance with the specifications, terms, and conditions of this solicitation.

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
PUMP, ROTARY
Solicitation # SPE7M1-27-T-2743
Solicitation SPE7M1-27-T-2743, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of 85 rotary pumps (NSN 4320-01-673-1390). The contract requires a delivery period of 244 days after receipt of order and specifies that inspection and acceptance will occur at the origin. The procurement includes a First Article Test (FAT) requirement, necessitating the testing of two units and providing written notice to the Contracting Officer and Quality Assurance Representative at least 14 days prior to shipment. Technical compliance is governed by specific source-controlled drawings and the DLA Master List of Technical and Quality Requirements, with a mandate that the manufacturer's inspection system complies with ISO 9001:2015 or an equivalent standard. The contract imposes strict cybersecurity and export control mandates, requiring Cybersecurity Maturity Model Certification (CMMC) Level 2 and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, limiting distribution to certified contractors. Packaging must adhere to ASTM D3951 and MIL-STD-129, with specific requirements for hazardous materials and radioactive substances. Financial administration is handled via the Wide Area WorkFlow (WAWF) system. While the solicitation is listed as a total small business set-aside in some metadata, other sections indicate it is not a small business set-aside; offerors are prohibited from using additive manufacturing processes unless specifically authorized.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
Federal
43--PUMP,CENTRIFUGAL - AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QTC47
Solicitation N0010426QTC47, issued by NAVSUP Weapon Systems Support Mech, is a fixed-price request for quotations for the teardown, evaluation, and repair of centrifugal pump units, specifically NIIN 004511267 and NIIN 014918644. The scope requires that repaired units meet all operational and functional requirements as defined by the specified Cage Codes and reference numbers, achieving an operable condition capable of performing as a new unit. All work must adhere to contractor standard practices and approved technical procedures, with physical identification following MIL-STD-130 and packaging complying with MIL-STD-2073 and MIL-P-16789. Specialized requirements include oxygen cleaning per MIL-STD-1330 and strict palletization standards under MIL-STD-147. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation includes risk assessments via the Supplier Performance Risk System regarding item, price, and supplier risk. Contractors are subject to a mandatory Repair Turnaround Time, with failure to meet this requirement resulting in per-unit monthly price reductions. Quality assurance is managed through Government Source Inspection at the point of origin, and all payment requests must be processed electronically via the Wide Area Workflow system. The response deadline for this solicitation is November 16, 2026.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 28 days
View Details

More opportunities from Florida → Public Services - Environmental Svcs.

Same awarding agency

NAICS: 811310
New
SLED
Generator Maintenance and Repair Services
Solicitation # RFP 27-021
The City of Clermont is soliciting proposals under RFP 27-021 for the comprehensive maintenance and repair of all City-owned generators, which provide critical backup power for public safety facilities, water well sites, lift stations, and other municipal buildings. The scope of work includes preventive maintenance, inspections, testing, emergency response, and as-needed repairs. The selected contractor must provide all necessary labor, materials, tools, and transportation to ensure equipment remains in reliable operating condition according to manufacturer recommendations and the Florida Building Code. Key deliverables include an annual maintenance schedule and detailed inspection reports provided with itemized invoices. Proposals must be submitted via the OpenGov Portal by December 10, 2026. The City will evaluate respondents based on a weighted scoring system focusing on company experience, personnel qualifications, maintenance methodology, emergency response capability, cost, and business location. Technical requirements specify that assigned technicians must have at least five years of relevant commercial generator experience and provide certifications for City approval. The contract includes an option for three additional twelve-month renewals and requires the contractor to submit an annual Emergency Response Plan by April 1. Administrative requirements include Net-30 payment terms in accordance with the Local Government Prompt Payment Act and proof of insurance with a minimum Workers Compensation limit of 1 million dollars. Contractors must comply with Florida cybersecurity requirements, E-Verify employment eligibility, and OSHA safety standards. Pricing is requested on a unit-cost basis for various generator sizes, ranging from 0 to over 1001 kw, and must be submitted in the original Excel format. All goods provided must be new, current standard production models, and delivered F.O.B. Destination.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 22 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS