Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Assurance and Inspection Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
Aviation Engineering, Planning & Consulting Services LKU-27-03
Solicitation # LKU-27-03
The Louisa County Industrial Development Authority is soliciting qualification proposals for professional architectural, engineering, and planning services to support airport development projects at the Louisa County Airport. This on-call, task-ordered contract covers a primary performance period from December 17, 2026, through December 16, 2027, with options for four successive one-year renewals. Anticipated projects over the next five years include runway extensions, hangar construction, airside and landside paving, drainage, lighting, land acquisitions, and general environmental planning. All work must comply with the U.S. Department of Transportation Federal Aviation Administration Advisory Circular No. 150/1400-14E Change 1 and the Code of Virginia. Proposals are due by November 3, 2026, and must be submitted as both hard copies in sealed envelopes and electronic copies via CD or flash drive, or through the eVA portal. Required documentation includes a signed title page, the signed Master Contract General Conditions Agreement, a list of at least three client references, a certificate of insurance naming the County of Louisa as an additional insured, and all applicable professional licenses. Evaluation is based on a point system focusing on the firm's experience with similar projects, ability and availability to perform, qualifications of key personnel, and the overall strength of the proposal. Award selection is based on the firm that most closely satisfies the County's needs rather than the lowest cost. Contractors must adhere to strict administrative and legal standards, including maintaining a drug-free workplace and complying with non-discrimination laws such as the Americans with Disabilities Act and the Federal Civil Rights Act of 1964. Payment is processed via progress applications that must include the owner's job number and an Affidavit and Release Waiver of All Claims and Liens. The successful firm is held responsible for the technical accuracy and professional quality of all deliverables, with a requirement to correct any deficiencies without additional compensation.
Louisa County

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
Federal
C1DA--VISN 1 - INDEFINITE DELIVERY INDEFINITE QUANTITY ARCHITECT CONTRACT
Solicitation # 36C24526R0107
The Department of Veterans Affairs, VISN 5, Network Contracting Office 5 is seeking multiple awardees for an Indefinite Delivery Indefinite Quantity (IDIQ) Architect and Engineering contract to provide ongoing engineering services. The scope of work covers medical facilities within VISN 5, including the Veterans Affairs Maryland Healthcare System, VA Medical Centers in West Virginia and Washington, D.C., and associated Community Based Clinics. This procurement is a 100 percent total set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 541330, with a small business size standard of 25.5 million dollars. The IDIQ contract has a ten-year term from the date of award with a total aggregate value not to exceed 450 million dollars. Work will be executed through individual firm fixed price task orders competed among the IDIQ awardees, with task order values ranging from a minimum of 2,500 dollars to a maximum of 2 million dollars. Eligible offerors must be registered and verified in the VetBiz Registry and the System for Award Management (SAM). The solicitation package is expected to be available for download on or about October 1, 2026, with a response deadline of October 1, 2026, at 10:00 AM Eastern Time. All inquiries should be directed via email to the contracting officer, Liana J. Holland.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
Federal
FY 27 NRRE SETA Engineering Services
Solicitation # N0018926Q3105
Solicitation N0018926Q3105 is a service acquisition task issued by NAVSUP FLT LOG CTR NORFOLK to provide highly specialized System Engineering and Technical Assistance (SETA) to the Global Force Management (GFM)/Navy Readiness Reporting Enterprise (NRRE) Program Management Office at U.S. Fleet Forces Command in Norfolk, Virginia. The GFM/NRRE program is critical for Navy compliance with U.S. Code Title 10, providing the authoritative systems used by commanders to assess and report readiness to the Joint Chiefs of Staff, Combatant Commanders, and Congress. Due to the vital nature of this operational data, the systems are categorized as Risk Management Framework High, requiring strict adherence to cybersecurity and personnel security standards. The scope of work involves technical activities such as determining specifications, resolving interface problems, developing test requirements, and providing technical direction through the development of work statements and oversight of other contractors. The contract is a set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) with an estimated value of 25.5 million dollars. The period of performance consists of a base year from November 18, 2026, to November 17, 2027, with two subsequent one-year option periods. Award will be based on best value, with non-price factors—specifically technical approach and past performance—weighted significantly more than price. The pricing structure utilizes a mix of Firm Fixed Price for labor and Cost No Fee for other direct costs and travel.
Navsup Flt Logistics Ctr Norfolk

POSTED

about 12 hours ago

DEADLINE

in 9 days
NAICS: 541330
New
Federal
F108--657-27-101, FCA-Conduct Hazardous Material Abatement, 2027 AE Design -FY27 NRM
Solicitation # 36C25526R0181
The Department of Veterans Affairs Network Contracting Office 15 is seeking qualifications from Service-Disabled Veteran Owned Small Business (SDVOSB) architectural and engineering firms for a hazardous material abatement design project at the Saint Louis VA Medical Center, covering both the John Cochran and Jefferson Barracks Divisions. This procurement is conducted under the Brooks Act and FAR Subpart 36, with a focus on selecting a firm based on demonstrated competence and qualifications. The scope of work involves providing Verification of Prior Investigation of Hazardous materials (VPIH) to sample for asbestos, lead, and mold, followed by the development of schematics, design development, and final construction documents. Additionally, the selected firm will provide construction period services, including responding to RFIs, conducting approximately five site visits, and hiring a third-party commissioning agent. The anticipated contract will be a Firm Fixed Price award, with final design documents due within 96 calendar days of the notice to proceed. While the design contract value is not explicitly stated, the resulting construction project is estimated to range between $250,000 and $500,000. Interested firms must be registered in the System for Award Management (SAM) and the SBA registry. Submissions must consist of a completed Standard Form 330, limited to 50 pages, including an organizational chart and a design quality management plan. Qualifications will be evaluated based on professional qualifications, specialized experience in medical facilities, capacity to perform, past performance, and estimating effectiveness. All electronic submissions are due by October 9, 2026, at 2:00 PM Central Standard Time.
255-NETWORK Contract Office 15 (36C255)

POSTED

about 12 hours ago

DEADLINE

in 10 days
NAICS: 541330
New
Federal
United States Marine Corps Communication Systems (UCS) Integrated Product Team (IPT) Support
Solicitation # N65236-26-RFPREQ-LSUBP00004-0005
The Naval Information Warfare Center Atlantic (NIWC Atlantic) is conducting a market survey to identify small business capabilities for providing systems engineering, technical, software, cybersecurity, management, and logistics support for United States Marine Corps Communication Systems (UCS) Integrated Product Team (IPT) initiatives. This effort supports tactical, satellite, terrestrial, ground, and radar communications, as well as client computing equipment, covering both new engineering development and the sustainment of existing systems. The anticipated contract is a hybrid Cost-Plus-Fixed-Fee and Firm-Fixed-Price structure with an estimated value between 100 million and 250 million dollars. The projected period of performance consists of a one-year base period, four one-year option periods, and one six-month option period, with an approximate annual level of effort of 86 full-time equivalents. This opportunity is strictly limited to SEAPORT NxG small business MAC holders, and respondents must be registered in the Procurement Integrated Enterprise Environment (PIEE) to receive requests and submit responses. Key requirements include CMMC Level 2 certification and the ability to maintain an unclassified facility with wide area network capability. Work will be performed at contractor facilities and government facilities in Charleston, South Carolina, with some equipment deliveries destined for I, II, and III MEF fielding sites. Evaluation of capabilities will be based on corporate technical experience and the submission of up to four relevant citations of work performed within the last three years with an annual value of at least 10 million dollars. The response deadline for this sources sought notice is October 2, 2026.
Niwc Atlantic

POSTED

about 12 hours ago

DEADLINE

in 3 days
NAICS: 541330
New
Federal
System Engineering and Technical Assistance (SETA) Support for Public Safety Communications (PSC)
Solicitation # W15P7T-27-R-A001
The Army Contracting Command-Aberdeen Proving Ground, acting for the U.S. Army Capability Program Executive Command and Control, Information Network, is soliciting a single-award, Cost-Plus-Fixed Fee (CPFF) contract for Systems Engineering and Technical Assistance (SETA) services. This contract supports the Product Director Base Emergency Communications System (PD BECS) in the integration, modernization, and enhancement of Public Safety Communications (PSC) architecture. The scope includes critical tasks such as PSAP and NG-911 infrastructure modernization, LMR and Army EMWN updates, cybersecurity management, and enterprise architecture planning. The total period of performance is three years, consisting of a one-year base period, two one-year option periods, and one six-month option period. This opportunity is a small business set-aside under NAICS 541330, with an estimated first-year value of approximately 8.05 million dollars. Award will be based on a tradeoff process focusing on best overall value, where the technical approach and non-cost factors are significantly more important than price. Eligible offerors must demonstrate at least three years of experience in specific functional areas and achieve acceptable ratings in technical and past performance factors. Proposals are due by October 1, 2026, and must include separate volumes for past performance, technical approach, corporate experience, cost/price, and an organizational conflict of interest mitigation plan. Performance will be monitored via a Quality Assurance Surveillance Plan, with a heavy emphasis on accuracy in deliverables and strict adherence to cybersecurity reporting standards.
W6QK Acc-Apg

POSTED

about 12 hours ago

DEADLINE

in 1 day

AI Contract Overview

Show more

The contract seeks independent inspection and sampling services for fastener lots to ensure complete compliance with zero non-conformances as dictated by MIL-STD-1916 or ASQ Z1.4 standards. The work is focused on quality assurance activities critical to maintaining defense supply chain integrity, with inspections conducted to verify that every lot meets stringent military and industry quality benchmarks. The performance location is designated as Jacksonville, Florida, with the work tied to the Department of Defense’s Aviation Supply Chain initiative under NAICS code 541330 for scientific and technical consulting services. The solicitation is structured as a subcontract and was posted on July 15, 2026, with responses due by July 23, 2026, indicating a narrow window for qualified vendors to submit proposals. All inspection activities must be meticulously documented and aligned with established sampling plans to guarantee zero defects, emphasizing precision, accountability, and adherence to federal quality protocols.

General Info

Independent inspection and sampling for fastener lots to ensure zero non-conformances per MIL-STD-1916 or ASQ Z1.4 in Jacksonville, Florida.

NAICS

541330 - Engineering Services

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A1-26-T-2459.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUD, TURNLOCK FASTENER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent inspection and sampling of fastener lots to ensure zero non-conformances per MIL-STD-1916 or ASQ Z1.4 standards.

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2881
Solicitation SPE4A1-26-T-2881, issued by DLA Aviation, is a fixed-price request for 773 machine bolts identified by NSN 5306000514083. These are designated as critical application items and must be manufactured in accordance with TDP Rev A Gen 3 and applicable part standards. The items are to be delivered FOB Origin to DLA Distribution Depot Hill, with a need ship date of September 20, 2026, and an original required delivery date of August 13, 2027. The delivery timeline is specified as 126 days after order. Quality and technical compliance are strictly governed by several standards, including MIL-STD-130N for identification marking and MIL-STD-129 for shipment marking. Packaging must adhere to MIL-STD-2073-1E and RP001. Inspection and acceptance will occur at the origin, requiring a manufacturer's inspection system that complies with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance. The government explicitly prohibits the use of additive manufacturing for these items, and such offers will be ineligible for award. Evaluation includes a price preference for certified HUBZone Small Business Concerns. Additionally, contractors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.
Precision Turned Product Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, EL
Solicitation # SPE4A1-26-T-2962
DLA Aviation is issuing a Request for Quotations (RFQ) under solicitation SPE4A1-26-T-2962 for the procurement of 331 Each insulation sheets, identified as a Commercial Off The Shelf (COTS) and Critical Application Item. The material, part number WGENHT2088 (NSN 5970-01-614-8043), features a 36-inch length and has no specified shelf life. This acquisition falls under NAICS code 335932, and interested offerors must submit their quotes through the DLA Internet Bid Board System (DIBBS) by the deadline of October 6, 2026. The contract requires delivery to the DLA Distribution Depot Hill at Hill AFB, Utah, with an original required delivery date of November 23, 2026, and a specified need ship date of July 20, 2026. The contract incorporates rigorous technical, quality, and safety standards, including DLA packaging requirements (RP001) and MIL-STD-2073-1E for preservation. Marking must comply with MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. Compliance with domestic material restrictions, such as the Buy American Act and the Berry Amendment, is required, and offerors must provide disclosure if using non-domestic materials. Additionally, the solicitation includes significant cybersecurity and information security clauses, such as DFARS 252.204-7012 for safeguarding covered defense information. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2, and all payment requests and receiving reports must be processed electronically via the Wide Area WorkFlow (WAWF) system.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A1-26-T-2965
This solicitation, issued by the DLA Aviation Supply Chain, is a request for quotations for the procurement of 206 machine screws, identified by NSN 5305-00-067-6542 and part number 100161C8. The procurement is a non-small business set-aside, with quotes due via the DIBBS system by October 6, 2026. The required delivery date is May 28, 2027, with a requested ship date of March 17, 2027. Delivery is to be made FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract incorporates various technical and quality requirements from the DLA Master List, and the item is identified as a commercial item. Quality assurance is a critical component of this contract, requiring sampling in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Specific verification levels and AQLs are assigned to critical, major, and minor attributes, with unspecified attributes defaulting to major. Packaging must comply with ASTM D3951, while marking and labeling must adhere to MIL-STD-129. The contract also includes strict provisions regarding additive manufacturing, which is prohibited unless specifically authorized, and requires compliance with various federal regulations, including the Buy American Act, cybersecurity safeguarding standards, and hazardous material labeling. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS